The “Internet of Things” (IoT) refers to a set of intelligent “objects” that can communicate with each other directly or through a network. The IoT is the embodiment of the idea that everything can be connected an...The “Internet of Things” (IoT) refers to a set of intelligent “objects” that can communicate with each other directly or through a network. The IoT is the embodiment of the idea that everything can be connected anywhere and at any time. The concept can be applied to sectors such as e-health, e-government, automotive, geographic information systems, remote sensing, home networking, e-commerce and climate change mitigation. Unlike the Internet, the IoT has its own constraints, notably those linked to heterogeneity. This divergence is linked to different protocols, technologies and algorithms implemented in these connected objects for their interconnection. It should be noted that IoT devices can communicate with each other using different protocols and dedicated M2M (Machine to Machine) communication technologies. The aim of this work is to find solutions for optimising energy consumption during data exchanges between connected objects, with respect to certain constraints by using firstly this exchange for only Message Queuing Telemetry Transport (MQTT) and secondly the combination of the MQTT protocol and the Constrained Application Protocol (CoAP) protocol to check the quantity of the energy optimized. The MQTT protocol, for example, is one of the most widely used protocols for connected objects. Admittedly, this protocol consumes less energy, but in the situation of a very large number of users, the problem of saturation inevitably arises. In this article, we propose a solution of optimising energy consumption by combining the MQTT protocol with the CoAP protocol which can allow to use the standby mode contrary to the use of MQTT where the broker is always being turning. This solution has not yet been implemented but is being discussed. In this article, we’re going to use the joulemeter which is an application developed by Microsoft to measure and estimate the energy consumption of computers and applications. In our case, we take the example of the “Service Broker for network connections” of the Windows’s 10 Operating System, in my own computer to show the difference between the consumption of energy without the standby mode and with standby mode, because with the MQTT, the Broker’s MQTT is always on. Now, with the combination MQTT and CoAP, it is possible that we have standby mode and to compare these two cases in term of consumption of an energy. And to do it, we must use the joulemeter that we installed in our computer to simulate it. This is achieved by using the CoAP protocol combined with the MQTT protocol. The aim of our work is to reduce energy consumption in order to solve the problem of saturation of the MQTT by linking it to CoAP protocol by using Joulemeter mentioned above.展开更多
The traditional wired networks in an industrial firm often encounters large difficulties,such as the cable installation,regular maintenance and cable replacement and so on,all these results in high cost.So,in this pap...The traditional wired networks in an industrial firm often encounters large difficulties,such as the cable installation,regular maintenance and cable replacement and so on,all these results in high cost.So,in this paper,we propose an IP-based hierarchical wireless network architecture and apply some of the technologies of 6LoWPAN to it.We verify the proposed architecture via real implementation with a wireless backbone,sensor networks and a connection between those networks.And the IP-based hierarchical industrial network is indeed an advanced network for harsh industrial environments.展开更多
针对物联网(Internet of Things,IoT)的安全和隐私问题,以及传统的访问控制方法不适应于IoT环境的现状,提出了一种分布式的基于上下文和权能的访问控制架构.该架构的授权决策过程由嵌入到设备中的授权决策模块PDP来实现,以达到分布式的...针对物联网(Internet of Things,IoT)的安全和隐私问题,以及传统的访问控制方法不适应于IoT环境的现状,提出了一种分布式的基于上下文和权能的访问控制架构.该架构的授权决策过程由嵌入到设备中的授权决策模块PDP来实现,以达到分布式的授权目标;特别是权能令牌的特殊构造,不仅可方便实现基于设备上下文的访问控制,而且利用椭圆曲线密码体制来实现端到端的认证、完整性和不可抵赖性;消息传输机制采用更适合于物联网的受限应用协议CoAP(Constrained Application Protocol).实验结果表明,该架构是可行的.展开更多
文摘The “Internet of Things” (IoT) refers to a set of intelligent “objects” that can communicate with each other directly or through a network. The IoT is the embodiment of the idea that everything can be connected anywhere and at any time. The concept can be applied to sectors such as e-health, e-government, automotive, geographic information systems, remote sensing, home networking, e-commerce and climate change mitigation. Unlike the Internet, the IoT has its own constraints, notably those linked to heterogeneity. This divergence is linked to different protocols, technologies and algorithms implemented in these connected objects for their interconnection. It should be noted that IoT devices can communicate with each other using different protocols and dedicated M2M (Machine to Machine) communication technologies. The aim of this work is to find solutions for optimising energy consumption during data exchanges between connected objects, with respect to certain constraints by using firstly this exchange for only Message Queuing Telemetry Transport (MQTT) and secondly the combination of the MQTT protocol and the Constrained Application Protocol (CoAP) protocol to check the quantity of the energy optimized. The MQTT protocol, for example, is one of the most widely used protocols for connected objects. Admittedly, this protocol consumes less energy, but in the situation of a very large number of users, the problem of saturation inevitably arises. In this article, we propose a solution of optimising energy consumption by combining the MQTT protocol with the CoAP protocol which can allow to use the standby mode contrary to the use of MQTT where the broker is always being turning. This solution has not yet been implemented but is being discussed. In this article, we’re going to use the joulemeter which is an application developed by Microsoft to measure and estimate the energy consumption of computers and applications. In our case, we take the example of the “Service Broker for network connections” of the Windows’s 10 Operating System, in my own computer to show the difference between the consumption of energy without the standby mode and with standby mode, because with the MQTT, the Broker’s MQTT is always on. Now, with the combination MQTT and CoAP, it is possible that we have standby mode and to compare these two cases in term of consumption of an energy. And to do it, we must use the joulemeter that we installed in our computer to simulate it. This is achieved by using the CoAP protocol combined with the MQTT protocol. The aim of our work is to reduce energy consumption in order to solve the problem of saturation of the MQTT by linking it to CoAP protocol by using Joulemeter mentioned above.
基金MKE(the Ministry of Knowledge Economy),Korea,under the Convergence-ITRC support program(NIPA-2011C6150-1101-0004)supervised by the NIPA(National IT Industry Promotion Agency)KCC(Korea Communications Commis-sion),Korea,under the R&D program supervised by the KCA(Korea Communications Agency)(KCA-2011-08913-05001)
文摘The traditional wired networks in an industrial firm often encounters large difficulties,such as the cable installation,regular maintenance and cable replacement and so on,all these results in high cost.So,in this paper,we propose an IP-based hierarchical wireless network architecture and apply some of the technologies of 6LoWPAN to it.We verify the proposed architecture via real implementation with a wireless backbone,sensor networks and a connection between those networks.And the IP-based hierarchical industrial network is indeed an advanced network for harsh industrial environments.
文摘针对物联网(Internet of Things,IoT)的安全和隐私问题,以及传统的访问控制方法不适应于IoT环境的现状,提出了一种分布式的基于上下文和权能的访问控制架构.该架构的授权决策过程由嵌入到设备中的授权决策模块PDP来实现,以达到分布式的授权目标;特别是权能令牌的特殊构造,不仅可方便实现基于设备上下文的访问控制,而且利用椭圆曲线密码体制来实现端到端的认证、完整性和不可抵赖性;消息传输机制采用更适合于物联网的受限应用协议CoAP(Constrained Application Protocol).实验结果表明,该架构是可行的.
