Lunar In Situ Large-Scale Construction:Quantitative Evaluation of Regolith Solidification Techniques

Lunar habitat construction is crucial for successful lunar exploration missions.Due to the limitations of transportation conditions,extensive global research has been conducted on lunar in situ material processing techniques in recent years.The aim of this paper is to provide a comprehensive review,precise classification,and quantitative evaluation of these approaches,focusing specifically on four main approaches:reaction solidification(RS),sintering/melting(SM),bonding solidification(BS),and confinement formation(CF).Eight key indicators have been identified for the construction of low-cost and highperformance systems to assess the feasibility of these methods:in situ material ratio,curing temperature,curing time,implementation conditions,compressive strength,tensile strength,curing dimensions,and environmental adaptability.The scoring thresholds are determined by comparing the construction requirements with the actual capabilities.Among the evaluated methods,regolith bagging has emerged as a promising option due to its high in situ material ratio,low time requirement,lack of hightemperature requirements,and minimal shortcomings,with only the compressive strength falling below the neutral score.The compressive strength still maintains a value of 2–3 MPa.The proposed construction scheme utilizing regolith bags offers numerous advantages,including rapid and large-scale construction,ensured tensile strength,and reduced reliance on equipment and energy.In this study,guidelines for evaluating regolith solidification techniques are provided,and directions for improvement are offered.The proposed lunar habitat design based on regolith bags is a practical reference for future research.

Construction Technique Analysis and Improvement for Rammed Earth Wall of Rural Houses in Hanzhong

Rammed earth wall technique is one of the local widespread traditional construction methods, and it has superior physical property and ecological protection characteristic. When contemporary raw-soil building is replaced by industry building, the hometown building culture is perishing gradually. In order to inherit and develop the Hanzhong local building, rammed earth wall in Taiyangling and Cangshe hometown is investigated, and the characteristics and construction techniques of the local rammed earth wall are concluded. According to the construction problems, the improvement suggestions are put forward, which establishes the foundation to investigate rammed earth wall further, and guide Rural House construction.

Construction monitoring of lock head base plate using distributed optical fibre sensing technique

The concrete hydration heat release process of the base plate is monitored using Roman optical time domain reflectometry（ROTDR） sensing sensors. The monitoring data shows that the internal maximum temperature of the base plate is about 54 ℃ after the concrete was cured for 120 h. The fiber Bragg grating （FBG） temperature sensors are adopted to measure the surface temperature of the concrete and the temperature results are used to compensate the data measured by the pulse-prepump Brillouin optical time-domain analyzer （PPP-BOTDA） to obtain the real concrete surface strain of the base plate. The monitoring data is analyzed to obtain a clear understanding of the strain state of the base plate under the effect of concrete hydration heat release. The monitoring results demonstrate the potential of distributed optical fibre sensing techniques as a powerful tool in real-time construction monitoring, and also provide an important insight into the design, construction and maintenance of large hydraulic structures.

Current concept in dysplastic hip arthroplasty: Techniques for acetabular and femoral reconstruction

Adult patients with developmental dysplasia of the hip develop secondary osteoarthritis and eventually end up with total hip arthroplasty(THA) at younger age. Because of altered anatomy of dysplastic hips, THA in these patients represents technically demanding procedure. Distorted anatomy of the acetabulum and proximal femur together with conjoined leg length discrepancy present major challenges during performing THA in patients with developmental dysplasia of the hip. In addition, most patients are at younger age, therefore, soft tissue balance is of great importance(especially the need to preserve the continuity of abductors) to maximise postoperative functional result. In this paper we present a variety of surgical techniques availablefor THA in dysplastic hips, their advantages and disadvantages. For acetabular reconstruction following techniques are described: Standard metal augments(prefabricated), Custom made acetabular augments(3D printing), Roof reconstruction with vascularized fibula, Roof reconstruction with pedicled iliac graft, Roof reconstruction with autologous bone graft, Roof reconstruction with homologous bone graft, Roof reconstruction with auto/homologous spongious bone, Reinforcement ring with the hook in combination with autologous graft augmentation, Cranial positioning of the acetabulum, Medial protrusion technique(cotyloplasty) with chisel, Medial protrusion technique(cotyloplasty) with reaming, Cotyloplasty without spongioplasty. For femoral reconstruction following techniques were described: Distraction with external fixator, Femoral shortening through a modified lateral approach, Transtrochanteric osteotomies, Paavilainen osteotomy, Lesser trochanter osteotomy, Double-chevron osteotomy, Subtrochanteric osteotomies, Diaphyseal osteotomies, Distal femoral osteotomies. At the end we present author's treatment method of choice: for acetabulum we perform cotyloplasty leaving only paper-thin medial wall, which we break during acetabular cup impacting. For femoral side first we peel of all rotators and posterior part of gluteus medius and vastus lateralis from greater trochanter on the very thin flake of bone. This method allows us to adequately shorten proximal femoral stump, with possibility of additional resection of proximal femur. Furthermore, several advantages and disadvantages of this procedure are also discussed.

Analysis of algebraic reconstruction technique for accurate imaging of gas temperature and concentration based on tunable diode laser absorption spectroscopy

An improved algebraic reconstruction technique（ART） combined with tunable diode laser absorption spectroscopy（TDLAS） is presented in this paper for determining two-dimensional（2D） distribution of H2O concentration and temperature in a simulated combustion flame.This work aims to simulate the reconstruction of spectroscopic measurements by a multi-view parallel-beam scanning geometry and analyze the effects of projection rays on reconstruction accuracy.It finally proves that reconstruction quality dramatically increases with the number of projection rays increasing until more than 180 for 20 × 20 grid,and after that point,the number of projection rays has little influence on reconstruction accuracy.It is clear that the temperature reconstruction results are more accurate than the water vapor concentration obtained by the traditional concentration calculation method.In the present study an innovative way to reduce the error of concentration reconstruction and improve the reconstruction quality greatly is also proposed,and the capability of this new method is evaluated by using appropriate assessment parameters.By using this new approach,not only the concentration reconstruction accuracy is greatly improved,but also a suitable parallel-beam arrangement is put forward for high reconstruction accuracy and simplicity of experimental validation.Finally,a bimodal structure of the combustion region is assumed to demonstrate the robustness and universality of the proposed method.Numerical investigation indicates that the proposed TDLAS tomographic algorithm is capable of detecting accurate temperature and concentration profiles.This feasible formula for reconstruction research is expected to resolve several key issues in practical combustion devices.

The “Colonial Wig” pancreaticojejunostomy:zero leaks with a novel technique for reconstruction after pancreaticoduodenectomy

BACKGROUND: Postoperative pancreatic fistula(POPF) remains common and morbid after pancreaticoduodenectomy(PD). A major advance in the study of POPF is the fistula risk score(FRS).METHODS: We analyzed 48 consecutive patients undergoing PD. The 'Colonial Wig' pancreaticojejunostomy(CWPJ) technique was used in the last 22 PDs, we compared 22 CWPJ to 26 conventional PDs. RESULTS: Postoperative morbidity was 49%(27% Clavien grade >2). The median length of hospital stay was 11 days. In the first 26 PDs, the PJ was performed according to standard techniques and the clinically relevant POPF(CR-POPF) rate was 15%, similar to the FRS-predicted rate(14%). In the next 22 PJs, the CWPJ was employed. Although the FRS-predicted rates were similar in these two groups(14% vs 13%), the CRPOPF rate in the CWPJ group was 0(P=0.052).CONCLUSION: Early experience with the CWPJ is encouraging, and this anastomosis may be a safe and effective way to lower POPF rates.

Reconstruction of the Unsteady Supersonic Flow around a Spike Using the Colored Background Oriented Schlieren Technique

In this paper, the improved Background Oriented Schlieren technique called CBOS (Colored Background Oriented Schlieren) is described and used to reconstruct the density fields of three-dimensional flows. The Background Oriented Schlieren technique (BOS) allows the measurement of the light deflection caused by density gradients in a compressible flow. For this purpose the distortion of the image of a background pattern observed through the flow is used. In order to increase the performance of the conventional Background Oriented Schlieren technique, the monochromatic background is replaced by a colored dot pattern. The different colors are treated separately using suitable correlation algorithms. Therefore, the precision and the spatial resolution can be highly increased. Furthermore a special arrangement of the different colored dot patterns in the background allows astigmatism in the region with high density gradients to be overcome. For the first time an algebraic reconstruction technique (ART) is then used to reconstruct the density field of unsteady flows around a spike-tipped model from CBOS measurements. The obtained images reveal the interaction between the free-stream flow and the high-pressure region in front of the model, which leads to large-scale instabilities in the flow.

Research on Model Construction and Technique Support for Integrated Rehabilitation of Rock Desertification in Chaoying Small Watershed of Bijie Test Area of Guizhou Province

Selecting Chaoying small watershed with representative karst rocky desertification in the Bijie test area of Guizhou Province as an example, according to karst rocky desertiflcation degree and the existing eco-environmental problems in the small watershed, we study developmental model and technique support system for integrated rehabilitation of rocky desertification in the small watershed, and bring forward the development model and technique integration for integrated rehabilitation of rocky desertification, which adapt to the karst areas of Bijie test area, Guizhou Province and even South China.

The robot-assisted ureteral reconstruction in adult:A narrative review on the surgical techniques and contemporary outcomes

Despite the rapid increase in the use of robotic surgery in urology,the majority of ureteric reconstruction procedures are still performed using laparoscopic or open approaches.This is primarily due to uncertainty regarding the advantages of robotic approaches over conventional ones,and the unique difficulty in identifying the specific area of interest due to the lack of tactile feedback from the current robotic systems.However,with the potential benefits of minimal invasiveness,several pioneering reports have been published on robotic surgery in urology.By reviewing the literature on this topic,we aimed to summarize the techniques,considerations,and consistent findings regarding robotic ureteral reconstruction in adults.Robotic applications for ureteral surgery have been primarily reported for pediatric urology,especially in the context of relieving a congenital obstruction in the ureteral pelvic junction.However,contemporary studies have also consistently demonstrated that robotic surgery could be a reliable option for malignant,iatrogenic,and traumatic conditions,which generally occur in adult patients.Nevertheless,the lack of comparative studies on heterogeneous hosts and disease conditions make it difficult to determine the benefit of the robotic approach over the conventional approach in the general population;thus,qualified prospective trials are needed for wider acceptance.However,contemporary reports have demonstrated that the robotic approach could be an alternative option for ureteral construction,even in the absence of haptic feedback,which can be compensated by various surgical techniques and enhanced three-dimensional visualization.

Program Evaluation and Review Technique (PERT) in Construction Schedule Risk Assessment

Construction project scheduling is one of the most critical factors for project success measurement.Not only for the project planning but for construction process management,the scheduling is the basic tool for communication between the owner and the project manager.By developing the schedule before the project starts,the owner knows in advance that the expected timeline of the project.By preparing construction process scheduling,the owner and general contractor can better manage the subcontractors,sub-trades progress,materials storage and deliveries,labors schedule and equipment set up which will eventually save time,money and hassle.Basically,Critical Path Method(CPM) is commonly used in the construction industry.CPM is a deterministic method that assumes that through the network,there is at least one path that determines the project duration and that the path is the critical path.CPM does not consider the uncertainty in the activities;rather it assumes that each activity can be finished in the given situation.Program Evaluation and Review Technique(PERT) is a stochastic technique which is based on the assumption that the duration of a single activity can be described by a probability density function.PERT takes into account the uncertainty during the construction process and has been created out of the need to plan,schedule and control complex projects with many uncertainties.The PERT approach is stated in some books and papers,but there is no deep investigation on the application in the schedule risk assessment.This paper investigates the PERT work process and takes a valuable try on the construction schedule risk assessment by using case studies.The utilization in the estimate the construction liquidated damage with the uncertainties is performed,which also can be used in the insurance company to calculate the insurance premium.

Analysis of Construction Techniques of Huishan Garden in Wuxi City,China

History of Huishan Garden in Wuxi City was introduced,spatial layout design of the garden analyzed.Its two functional areas(ancestral hall building area and affiliated garden area) mainly adopted the inward layout.Landscaping elements of the garden were particularly analyzed,it was proposed that the garden adopted intensive water layout,that is,the static waterscape design;its rockeries were all designed by water,showing perfect site selection,modeling and function;garden buildings were mostly designed in Huizhou style and in low density;landscape design involved diversified plant species,dominated by evergreen species and decorated by deciduous arbors.The author also summarized the utilization of landscaping techniques in Huishan Garden,including borrowed scenery,enframed scenery and obstructive scenery.

Development of welding technique in architectural and construction industry in China

This paper presents the achievements in welding technique for the large industrial buildings and structures in China, including the welding of furnaces,kilns,pots,tanks and pipes, the welding of steel construction of industrial building,high-storied building, gymnasium and steel construction of highway bridge. It mainly cites the new efficient and high-quality processes, equipments and materials used in fabricating typical up-to-date construction projects. The paper discusses the prospects for the technical development in welding materials, process and equipments as per usual requirements of architectural and construction industries.

Anti-Corrosion and Reconstruction of Surface Crystal Plane for Zn Anodes by an Advanced Metal Passivation Technique

For the aqueous Zn-ion battery,dendrite formation,corrosion,and interfacial parasitic reactions are major issues,which greatly inhibits their practical application.How to develop a method of Zn construction or treatment to solve these issues for Zn anodes are still great challenges.Herein,a simple and cheap metal passivation technique is proposed for Zn anodes from a corrosion science perspective.Similar to the metal anticorrosion engineering,the formed interfacial protective layer in a chemical way can sufficiently solve the corrosion issues.Furthermore,the proposed passivity approach can reconstruct Zn surface-preferred crystal planes,exposing more(002)planes and improving surface hydrophilicity,which inhibits the formation of Zn dendrites and hydrogen evolution effectively.As expected,the passivated Zn achieves outstanding cycling life(1914 h)with low voltage polarization(<40 mV).Even at 6 mA cm^(−2) and 3 mA h cm^(−2),it can achieve stable Zn deposition over 460 h.The treated Zn anode coupled with MnO_(2) cathode shows prominently reinforced full batteries service life,making it a potential Zn anode candidate for excellent performance aqueous Zn-ion batteries.The proposed passivation approach provides a guideline for other metal electrodes preparation in various batteries and establishes the connections between corrosion science and batteries.

Detailed analysis and simulation verification for reconstruction of plasma optical boundary with spectrometric technique on HL-2M tokamak

The plasma optical boundary reconstruction technique based on Hommen's theory is promising for future tokamaks with high parameters. In this work, we conduct detailed analysis and simulation verification to estimate the ‘logic loophole' of this technique. The finite-width effect and unpredictable errors reduce the technique's reliability, which leads to this loophole. Based on imaging theory, the photos of a virtual camera are simulated by integrating the assumed luminous intensity of plasma. Based on Hommen's theory, the plasma optical boundary is reconstructed from the photos. Comparing the reconstructed boundary with the one assumed, the logic loophole and its two effects are quantitatively estimated. The finite-width effect is related to the equivalent thickness of the luminous layer, which is generally about 2-4 cm but sometimes larger. The level of unpredictable errors is around 0.65 cm. The technique based on Hommen's theory is generally reliable, but finite-width effect and unpredictable errors have to be taken into consideration in some scenarios. The parameters of HL-2M are applied in this work.

English Paragraph Construction Rules and Implementation Techniques

A complete English Paragraph consists of five parts:opening sentence,topic sentence,supporting sentences,concluding sentence(and sometimes transitional sentence).The paper explores the construction rules of paragraph and explains its implementation techniques.The significance lies in that it is helpful to the teaching and study in some fields like reading comprehension,speaking and writing.

Using Multivariable Linear Regression Technique for Modeling Productivity Construction in Iraq

Productivity is a very important element in the process of construction project management especially with regard to the estimation of the duration of the construction activities, this study aims at developing construction productivity estimating model for marble finishing works of floors using Multivariable Linear Regression technique (MLR). The model was developed based on 100 set of data collected in Iraq for different types of projects such as residential, commercial and educational projects. Which these are used in developing the model and evaluating its performance. Ten influencing factors are utilized for productivity forecasting by MLR model, and they include age, experience, number of the assist labor, height of the floor, size of the marbles tiles, security conditions, health status for the work team, weather conditions, site condition, and availability of construction materials. One model was built for the prediction of the productivity of marble finishing works for floors. It was found that MLR have the ability to predict the productivity for finishing works with excellent degree of accuracy of the coefficient of correlation (R) 90.6%, and average accuracy percentage of 96.3%. This indicates that the relationship between the independent and independent variables of the developed models is good and the predicted values from a forecast model fit with the real-life data.

Properties and Characteristics of Regolith-Based Materials for Extraterrestrial Construction

The construction of extraterrestrial bases has become a new goal in the active exploration of deep space.Among the construction techniques,in situ resource-based construction is one of the most promising because of its good sustainability and acceptable economic cost,triggering the development of various types of extraterrestrial construction materials.A comprehensive survey and comparison of materials from the perspective of performance was conducted to provide suggestions for material selection and optimization.Thirteen types of typical construction materials are discussed in terms of their reliability and applicability in extreme extraterrestrial environment.Mechanical,thermal and optical,and radiation-shielding properties are considered.The influencing factors and optimization methods for these properties are analyzed.From the perspective of material properties,the existing challenges lie in the comprehensive,long-term,and real characterization of regolith-based construction materials.Correspondingly,the suggested future directions include the application of high-throughput characterization methods,accelerated durability tests,and conducting extraterrestrial experiments.

Application of VPN Technique in the Construction of Public Health Information System

Summary： Data communication and sharing of five level network of Public Health Information System, i.e. nation, province, district （city）, county, and town, as far as to the countryside level were described, and how to apply the three solutions, i.e. Access VPN, Intranet VPN, and Extranet VPN of VPN technique to achieve the appropriation of the public network was also presented.

A Sound Field Separation and Reconstruction Technique Based on Reciprocity Theorem and Fourier Transform

We show a method to separate the sound field radiated by a signal source from the sound field radiated by noise sources and to reconstruct the sound field radiated by the signal source. The proposed method is based on reciprocity theorem and the Fourier transform. Both the sound field and its gradient on a measurement surface are needed in the method. Evanescent waves are considered in the method, which ensures a high resolution reconstruction in the near field region of the signal source when evanescent waves can be measured. A simulation is given to verify the method and the influence of measurement noise on the method is discussed.

Clinical diagnostic advances in intestinal anastomotic techniques:Hand suturing,stapling,and compression devices

The development of intestinal anastomosis techniques,including hand suturing,stapling,and compression anastomoses,has been a significant advancement in surgical practice.These methods aim to prevent leakage and minimize tissue fibrosis,which can lead to stricture formation.The healing process involves various phases:hemostasis and inflammation,proliferation,and remodeling.Mechanical staplers and sutures can cause inflammation and fibrosis due to the release of profibrotic chemokines.Compression anastomosis devices,including those made of nickel-titanium alloy,offer a minimally invasive option for various surgical challenges and have shown safety and efficacy.However,despite advancements,anastomotic techniques are evaluated based on leakage risk,with complications being a primary concern.Newer devices like Magnamosis use magnetic rings for compression anastomosis,demonstrating greater strength and patency compared to stapling.Magnetic technology is also being explored for other medical treatments.While there are promising results,particularly in animal models,the realworld application in humans is limited,and further research is needed to assess their safety and practicality.