Effect of the off-road terrains on the ride comfort of construction vehicles

In order to evaluate the impact of off-road terrains on the ride comfort of construction vehicles,a nonlinear dynamic model of the construction vehicles interacting with the terrain deformations is established based on Matlab/Simulink software.The weighted root mean square(RMS)acceleration responses and the power spectral density(PSD)acceleration responses of the driver s seat heave,the pitch and roll angle of the cab in the low-frequency region are chosen as objective functions under different operation conditions of the vehicle.The results show that the impact of off-road terrains on the driver s ride comfort and health is clear under various conditions of deformable terrains and range of vehicle velocities.In particular,the driver s ride comfort is greatly affected by a soil terrain while the comfortable shake of the driver is strongly affected by a sand terrain.In addition,when the vehicle travels on a poor soil terrain in the frequency range below 4 Hz,more resonance peaks of acceleration PSD responses occurred than that on a rigid road of ISO 2631-1 level C.Thus,the driver s health is significantly affected by the deformable terrain in a low-frequency range.

Shift scheduling strategy development for parallel hybrid construction vehicles

The shift scheduling system of the transmission has an important effect on the dynamic and economic performance of hybrid vehicles. In this work, shift scheduling strategies are developed for parallel hybrid construction vehicles. The effect of power distribution and direction on shift characteristics of the parallel hybrid vehicle with operating loads is evaluated, which must be considered for optimal shift control. A power distribution factor is defined to accurately describe the power distribution and direction in various parallel hybrid systems. This paper proposes a Levenberg-Marquardt algorithm optimized neural network shift scheduling strategy. The methodology contains two objective functions, it is a dynamic combination of a dynamic shift schedule for optimal vehicle acceleration, and an energy-efficient shift schedule for optimal powertrain efficiency. The study is performed on a test bench under typical operating conditions of a wheel loader. The experimental results show that the proposed strategies offer effective and competitive shift performance.

Video-based construction vehicles detection and its application in intelligent monitoring system

While vehicle detection on highways has been reported before, to the best of our knowledge, intelligent monitoring system that aims at detecting hydraulic excavators and dump trucks on state-owned land has not been explored thoroughly yet. In this paper, we present an automatic, video-based algorithm for detecting hydraulic excavators and dump trucks. Derived from lessons learned from video processing, we proposed methods for foreground detection based on an improved frame difference algorithm, and then detected hydraulic excavators and dump trucks in the respective region of interest. From our analysis, we proposed methods based on inverse valley feature of mechanical arm and spatial-temporal reasoning for hydraulic excavator detection. In addition, we explored dump truck detection strategies that combine structured component projection with the spatial relationship. Experiments on real-monitoring sites demonstrated the promising performance of our system.

FOUR-PARAMETER AUTOMATIC TRANSMISSION TECHNOLOGY FOR CONSTRUCTION VEHICLE BASED ON ELMAN RECURSIVE NEURAL NETWORK

From the viewpoint of energy saving and improving transmission efficiency, the ZL50E wheel loader is taken as the study object. And the system model is analyzed based on the transmission system of the construction vehicle. A new four-parameter shift schedule is presented, which can keep the torque converter working in the high efficiency area. The control algorithm based on the Elman recursive neural network is applied, and four-parameter control system is developed which is based on industrial computer. The system is used to collect data accurately and control 4D180 power-shift gearbox of ZL50E wheel loader shift timely. An experiment is done on automatic transmission test-bed, and the result indicates that the control system could reliably and safely work and improve the efficiency of hydraulic torque converter. Four-parameter shift strategy that takes into account the power consuming of the working pump has important operating significance and reflects the actual working status of construction vehicle.

Development and Evaluation of Intersection-Based Turning Movement Counts Framework Using Two Channel LiDAR Sensors

This paper presents vehicle localization and tracking methodology to utilize two-channel LiDAR data for turning movement counts. The proposed methodology uniquely integrates a K-means clustering technique, an inverse sensor model, and a Kalman filter to obtain the final trajectories of an individual vehicle. The objective of applying K-means clustering is to robustly differentiate LiDAR data generated by pedestrians and multiple vehicles to identify their presence in the LiDAR’s field of view (FOV). To localize the detected vehicle, an inverse sensor model was used to calculate the accurate location of the vehicles in the LiDAR’s FOV with a known LiDAR position. A constant velocity model based Kalman filter is defined to utilize the localized vehicle information to construct its trajectory by combining LiDAR data from the consecutive scanning cycles. To test the accuracy of the proposed methodology, the turning movement data was collected from busy intersections located in Newark, NJ. The results show that the proposed method can effectively develop the trajectories of the turning vehicles at the intersections and has an average accuracy of 83.8%. Obtained R-squared value for localizing the vehicles ranges from 0.87 to 0.89. To measure the accuracy of the proposed method, it is compared with previously developed methods that focused on the application of multiple-channel LiDARs. The comparison shows that the proposed methodology utilizes two-channel LiDAR data effectively which has a low resolution of data cluster and can achieve acceptable accuracy compared to multiple-channel LiDARs and therefore can be used as a cost-effective measure for large-scale data collection of smart cities.