Study on constructive system of green cave dwelling in Loess Plateau—Interpretation with the “regional gene” theory

This article reveals the inherent evolution adjusting mechanism of regional architecture by means of considering the concept and method of "regional gene" as the research approach of regional architecture construction system, and in the mean- while establishes the "gene database" of regional architecture and optimum technology, on the basis of the principle of sustainable development and scientific evaluation system. In addition, this article chooses the planning of model villages of cave dwellings in Loess Plateau and the construction of ecological cave dwellings for case study to prove the feasibility of the research approach.

Efficiency and effectiveness of systems for the treatment of domestic wastewater based on subsurface flow constructed wetlands in Jarabacoa, Dominican Republic

Constructed wetlands(CwW)are well known nature-based systems for water treatment.This study evaluated the efficiency and effectiveness of seven domestic wastewater treatment systems based on horizontal flow CWs in Jarabacoa,the Dominican Republic.The results showed that the CWs were efficient in reducing the degree of contamination of wastewater to levels below the Dominican wastewater discharge standards for parameters such as the 5-day biochemical oxygen demand(BOD5)and chemical oxygen demand,but not for the removal of phosphorus and fecal coliforms.In addition,a horizontal flow subsurface wetland in the peri-urban area El Dorado was evaluated in terms of the performance of wastewater treatment in tropical climatic conditions.The concentrations of heavy metals,such as zinc,copper,chromium,and iron,were found to decrease in the effluent of the wetland,and the concentrations for nickel and manganese tended to increase.The levels of heavy metals in the effluent were lower than the limit values of the Dominican wastewater discharge standards.The construction cost of these facilities was around 200 USD per population equivalent,similar to the cost in other countries in the same region.This study suggested some solutions to the improved performance of CWs:selection of a microbial flora that guarantees the reduction of nitrates and nitrites to molecular nitrogen,use of endemic plants that bioaccumulate heavy metals,combination of constructed wetlands with filtration on activated carbon,and inclusion of water purification processes that allow to evaluate the reuse of treated water.

Robotic reconstructive surgery: The time has arrived

Thank you to the Asian Journal of Urology(AJU)for the honor of allowing me to be the guest editor for this special focus section on robotic urinary tract reconstruction.This topic has been a large focus for me in my career;in my pursuit of knowledge in this new sub-field of urology,I have been so fortunate to have met so many talented surgeons who share a similar passion.The urinary tract spans a large anatomical region,and due to the large variety of conditions that affect it,an endless variety of functional and structural urologic problems can arise.Urologists have always been adept surgeons capable of operating in various anatomical spaces and have embraced technological innovation.Historically,the trend has moved from open surgery to endoscopic treatment;however,many patients with reconstructive needs remain untreated or sub-optimally managed.

Modelling the water diversion of a sustainable cover system under humid climates

Extreme rainfall significantly threatens the safety of the landfill cover system,especially under humid climates.This study aims to provide design recommendations for a sustainable landfill cover system consisting of a low-permeability soil layer underlying a two-layer capillary barrier for humid climates.First,the numerical back-analysis was conducted for verification against a series of flume model tests.Then,a parametric study was performed to investigate the effects of inclination angle,particle size and layer thickness on the lateral diversion length(DL)of the three-layer cover system under the 100-year return period rainfall of humid climates.The results show that the water lateral DL of the cover system can be greatly enhanced by increasing the inclination angle from 3°to 18°.Moreover,the bottom layer of the cover system with a coarser d10 was more susceptible to the impact of the heavy rainfall,while this can be alleviated by increasing the thickness of the bottom layer.A dimensionless number,defined as the ratio of thickness and d_(10) of the bottom layer,is proposed for designing lateral diversion of the three-layer cover system under humid climates.To preserve the maximum DL,it is suggested that the proposed dimensionless number should be larger than 95 and 110 for the design of rainfall events with 50-year and 100-year return periods for humid climates,respectively.

An Image Fingerprint and Attention Mechanism Based Load Estimation Algorithm for Electric Power System

With the rapid development of electric power systems,load estimation plays an important role in system operation and planning.Usually,load estimation techniques contain traditional,time series,regression analysis-based,and machine learning-based estimation.Since the machine learning-based method can lead to better performance,in this paper,a deep learning-based load estimation algorithm using image fingerprint and attention mechanism is proposed.First,an image fingerprint construction is proposed for training data.After the data preprocessing,the training data matrix is constructed by the cyclic shift and cubic spline interpolation.Then,the linear mapping and the gray-color transformation method are proposed to form the color image fingerprint.Second,a convolutional neural network(CNN)combined with an attentionmechanism is proposed for training performance improvement.At last,an experiment is carried out to evaluate the estimation performance.Compared with the support vector machine method,CNN method and long short-term memory method,the proposed algorithm has the best load estimation performance.

Solving the Generalized Traveling Salesman Problem Using Sequential Constructive Crossover Operator in Genetic Algorithm

The generalized travelling salesman problem(GTSP),a generalization of the well-known travelling salesman problem(TSP),is considered for our study.Since the GTSP is NP-hard and very complex,finding exact solutions is highly expensive,we will develop genetic algorithms(GAs)to obtain heuristic solutions to the problem.In GAs,as the crossover is a very important process,the crossovermethods proposed for the traditional TSP could be adapted for the GTSP.The sequential constructive crossover(SCX)and three other operators are adapted to use in GAs to solve the GTSP.The effectiveness of GA using SCX is verified on some GTSP Library(GTSPLIB)instances first and then compared against GAs using the other crossover methods.The computational results show the success of the GA using SCX for this problem.Our proposed GA using SCX,and swap mutation could find average solutions whose average percentage of excesses fromthe best-known solutions is between 0.00 and 14.07 for our investigated instances.

Subsurface multi-physical characterization of mountain excavation and city construction in loess plateau with a fiber-optic sensing system

Mountain excavation and city construction(MECC)projects being launched in the Loess Plateau in China involve the creation of large-scale artificial land.Understanding the subsurface evolution characteristics of the artificial land is essential,yet challenging.Here,we use an improved fiber-optic monitoring system for its subsurface multi-physical characterization.The system enables us to gather spatiotemporal distribution of various parameters,including strata deformation,temperature,and moisture.Yan’an New District was selected as a case study to conduct refined in-situ monitoring through a 77 m-deep borehole and a 30 m-long trench.Findings reveal that the ground settlement involves both the deformation of the filling loess and the underlying intact loess.Notably,the filling loess exhibits a stronger creep capability compared to underlying intact loess.The deformation along the profile is unevenly distributed,with a positive correlation with soil moisture.Water accumulation has been observed at the interface between the filling loess and the underlying intact loess,leading to a significant deformation.Moreover,the temperature and moisture in the filling loess have reached a new equilibrium state,with their depths influenced by atmospheric conditions measuring at 31 m and 26 m,respectively.The refined investigation allows us to identify critical layers that matter the sustainable development of newly created urban areas,and provide improved insights into the evolution mechanisms of land creation.

“Instruction-Category” Approach of Test Suite Construction for Oven Embedded System

Being different from testing for popular GUI software, the “instruction-category” approach is proposed for testing embedded system. This approach is constructed by three steps including refining items, drawing instruction-brief and instruction-category, and constructing test suite. Consequently, this approach is adopted to test oven embedded system, and detail process is deeply discussed. As a result, the factual result indicates that the “instruction-category” approach can be effectively applied in embedded system testing as a black-box method for conformity testing.

Analysis of the Design and Implementation of a GIS System Incorporating Intelligent Recognition Models

The rapid economic growth,urbanization,and industrialization have led to a scarcity of land resources in coastal areas,exacerbating the conflict between humans and the environment.In order to promote economic development,attention has turned to the sea,and various coastal engineering projects have been undertaken,sparking a wave of land reclamation.However,while these efforts bring economic and social benefits,they also have implications for ecological relationships.To respond to and plan for changes in the coastline and land cover in a timely manner,this paper proposes and constructs a GIS system that integrates remote sensing image recognition models.The system combines geographic information system development technology with image recognition technology,streamlining the processing and identification of image data.This approach is particularly advantageous for marine management departments in their long-term monitoring and dynamic management of coastal lines,ensuring a more effective and efficient response.

Construction Method for Performance Management Curriculum Content System Based on Knowledge Graph

Performance Management is the core course of human resource management major,but its knowledge points lack multi-dimensional correlations.There are problems such as scattered content and unclear system,and it is urgent to reconstruct the content system of the course.Knowledge graph technology can integrate massive and scattered information into an organic structure through semantic correlation and reasoning.The application of knowledge graph to education and teaching can promote scientific and personalized teaching evaluation and better realize individualized teaching.This paper systematically combs the knowledge points of Performance Management course and forms a comprehensive knowledge graph.The knowledge point is associated with specific questions to form the problem map of the course,and then the knowledge point is further associated with the ability target to form the ability map of the course.Then,the knowledge point is associated with teaching materials,question bank and expansion resources to form a systematic teaching database,thereby giving the method of building the content system of Performance Management course based on the knowledge map.This research can be further extended to other core management courses to realize the deep integration of knowledge graph and teaching.

Interoperable Process： Efficient Systems in New Constructive and Product Performances

In the construction sector, which is one of the major goals of the new economy, the company is aiming at a new constructive practice and upgrading of the built, using ICT （information and communications technology） technologies. So the focus is on new operating and organizational models of sustainable building processes in the architecture, engineering and construction sectors, which are based on three-dimensional models of digital technology BIM （building information modeling）. It is intended as a human activity that improves building workflows and, through software and IFACs （industry foundation classes）, manages flexibility, coordinates and optimizes operational choices on time, economic, and environmental sustainability parameters. The goal is a new interoperable building process that involves designers, contractors and businesses from programming to lifecycle building and maintenance through the integrated project delivery of the building. Dynamic architectures, interactive with efficient technological and constructive systems, are integrated with innovative products of complex nature and bi-directional performance, engineered, with energy storage and renewable resources. The methodologies are based, above all, on the adoption of BIM technologies with the digital project manager and the use of robotic technological tools. Digitization is applied for the design and construction of architectural and infrastructure artifacts, in interaction with intelligent, adaptive, nanotechnical and user-friendly materials and climate. The results are aimed at efficient buildings with user comfort and safety, accuracy, and risk monitoring with remote monitoring, highlighting VDC （visual design construction） in CID （computational intelligent design）.

Optimal Formation Control for Second-Order Multi-Agent Systems With Obstacle Avoidance

Dear Editor,The optimal formation control design problem is studied for a class of second-order multi-agent systems(MASs) with obstacle avoidance.Based on the actor-critic framework, an optimized formation controller is proposed by constructing a novel performance index function. Furthermore, the stability of MAS is proved by constructing the Lyapunov function. The simulation results are provided to depict the effectiveness of the proposed strategies.

Multi-Zone-Wise Blockchain Based Intrusion Detection and Prevention System for IoT Environment

Blockchain merges technology with the Internet of Things(IoT)for addressing security and privacy-related issues.However,conventional blockchain suffers from scalability issues due to its linear structure,which increases the storage overhead,and Intrusion detection performed was limited with attack severity,leading to performance degradation.To overcome these issues,we proposed MZWB(Multi-Zone-Wise Blockchain)model.Initially,all the authenticated IoT nodes in the network ensure their legitimacy by using the Enhanced Blowfish Algorithm(EBA),considering several metrics.Then,the legitimately considered nodes for network construction for managing the network using Bayesian-Direct Acyclic Graph(B-DAG),which considers several metrics.The intrusion detection is performed based on two tiers.In the first tier,a Deep Convolution Neural Network(DCNN)analyzes the data packets by extracting packet flow features to classify the packets as normal,malicious,and suspicious.In the second tier,the suspicious packets are classified as normal or malicious using the Generative Adversarial Network(GAN).Finally,intrusion scenario performed reconstruction to reduce the severity of attacks in which Improved Monkey Optimization(IMO)is used for attack path discovery by considering several metrics,and the Graph cut utilized algorithm for attack scenario reconstruction(ASR).UNSW-NB15 and BoT-IoT utilized datasets for the MZWB method simulated using a Network simulator(NS-3.26).Compared with previous performance metrics such as energy consumption,storage overhead accuracy,response time,attack detection rate,precision,recall,and F-measure.The simulation result shows that the proposed MZWB method achieves high performance than existing works.

Marketing Model Analysis of Fashion Communication Based on the Visual Analysis of Neutrosophic Systems

In order to Improvement the Neutrosophic sets as effective tools to deal with uncertain and inconsistent information.The research takes method-ology of combined single-valued neutrosophic rough set and multi-scale deci-sion systems.This paper proposes the optimal scale selection and reduction algorithms based on multi-scale single-valued neutrosophic dominance rough set model.User requirements were analyzed using KJ method to construct a hierarchical model.According to the statistics of representative studies from China and the West,we found that,on the one hand,classical theory has been expanded and supplemented in fashion culture communication and market-ing.The topics are more micro-diverse,and the research methods are inspired by other disciplines;on the other hand,Chinese practice and Chinese cultural perspective need to fill the gap.The fashion content in the new fashion,however,needs to broaden its boundaries,and in addition to integrating with cultural theory and sociology,it needs to be integrated with fashion products,including product design,visual communication,image design and so on.Aesthetic communication needs to be taken into account as an important connotation,with visual communication and the communication of images as important research elements.On the whole,this research abroad inspires the development of domestic fashion culture communication and marketing research.

Research and Application of Meteorological Response Measures for Civil Engineering and Data Acquisition System

Meteorological conditions have a very important impact on the development of construction projects.In order to assist project site managers to quickly and accurately deal with the engineering risks brought by meteorological conditions,meteorological risk assessment indicators for civil construction are established based on the actual impact of different meteorological conditions on each sub-project of civil engineering.A meteorological intelligent management system is created,and it will select reasonable countermeasures from the integrated existing database and push them to on-site construction managers based on meteorological risk assessment indicators.Through the pre-set construction log module,the managers can give feedback on the application effect of the pushed measures,and achieve the effect of construction data collection,correction and expansion of the existing database.

Study on the Construction of Circular Economy Development System of Agriculture and Animal Husbandry in Tibet

As a basic industry in Tibet Autonomous Region,the development of agriculture and animal husbandry circular economy is of great practical significance,which is actively reflected in national high-quality development and new agriculture and animal husbandry circular model.The development direction and future trend directly determine the promotion and enhancement of regional agriculture and animal husbandry economy,which is highly valued and welcomed by academic circles.This paper mainly expounds the development connotation of agriculture and animal husbandry circular economy system from the perspective of Tibet's agriculture and animal husbandry economic development.It focuses on sorting out the construction and future direction of circular economy development system,effectively puts forward ideas and comprehensive understanding of the circular economy development system of agriculture and animal husbandry in Tibet,effectively promotes the promotion and basic change of circular economy of agriculture and animal husbandry,and effectively changes the traditional development model and new innovation model of agriculture and animal husbandry.

Construction of Legal System of China's Farmland Protection under the Coexistence of Multiple Objectives:Historical Logic,Practical Problems and Optimization Paths

[Objectives]To explore the evolution of the legal system of farmland protection and explore the rules and characteristics of policy development based on the theory and logic of institutional change since China's reform and opening up,reveal the problems and deep-seated reasons of its legislation,clarify the direction of farmland protection in the new period,and solve the"non-agricultural""non-grain"and ecological problems of farmland.[Methods]Literature analysis and inductive deduction methods were used.[Results]The evolution of the farmland protection legal system has gone through the process of"national consciousness-policy guidelines-institutional system",the change from"single subject to multiple subjects";change from the use of"one-way administrative means to coordinated use of administrative,economic and technical means".The practical problems of the farmland protection legal system are mainly due to the insufficient systematization of the farmland protection legal system itself,the generalization of quantity protection,the transformation of quality protection,and the absence of ecological protection.[Conclusions]It is recommended to improve the existing farmland protection legal system from the establishment of the Farmland Protection Law,the improvement of the farmland protection public participation mechanism and supervision mechanism,the establishment of the farmland quality construction and improvement system,the differentiated farmland occupation and supplementation balance system,and the ecological restoration system.

From Competition to Constructive Cooperation,No China Threat but China Opportunity

“The world is big enough to accommodate both countries”made headlines worldwide after Chinese President Xi Jinping said it at his meeting with U.S.President Joe Biden in San Francisco on November 15 to drive home the point that competition between two major countries like China and the United States cannot solve their or global problems.

An Investigation of Exoskeleton Robotic Systems in Assisting Construction Tasks*

Whilst industrial robots have been widely used in many industrial sectors, they are predominantly used in a structured factory environment. In recent years, off-site robotics have been investigated extensively and there are some promising candidates emerging. One such category of robots is exoskeleton robots and this paper provides an in-depth assessment of their suitability in assisting human operators in undertaking manual operations typically found in the construction industry. This work aims to objectively assess the advantages and disadvantages of these two suits and provide recommendations for further improvements of similar system designs. The paper focuses on the passive exoskeleton robotic suits which are commercially available. Three types of activities are designed and a mechatronic methodology has been designed and implemented to capture visual data in order to assess these systems in comparison with normal human operations. The study suggests that these passive suits do reduce the effort required by human operators to undertake the same construction tasks as evidenced by the results from one focused study, though a number of improvements could be made to improve their performance for wider adoption.

Multiple Collaborative Service Model and System Construction Based on Industrial Competitive Intelligence

This paper constructs a multiple collaborative service model of industrial competition intelligence with the main purpose of promoting the development of regional industries. The multiple service subjects include enterprises, governments, colleges and universities, scientific research institutes, industry associations and for-profit institutions. This article starts from the overall development of regional industrial economy, weighs the mutual relationship between the elements of the service model, and promotes multiple service subjects such as enterprises, governments, universities, research institutes, industry associations, and profit-making organizations to realize the collaborative service of resource intelligence, demand intelligence and data intelligence provides linkage intelligence service for the development and innovation of regional industries. This service model can improve the efficiency of industrial competitive intelligence services and the overall competitiveness of regional industries.