This paper first introduces the basic connotation of China’s whole-process engineering consulting.Immediately,analyze the organization model,service procurement model and charging standards of foreign whole-process e...This paper first introduces the basic connotation of China’s whole-process engineering consulting.Immediately,analyze the organization model,service procurement model and charging standards of foreign whole-process engineering consulting(international terminology full-life cycle engineering consultant).Second,discuss the government’s role in the development of engineering consulting from two aspects:service management and market access.Finally,combined with the above analysis,the specific problems faced in the implementation process of the whole process engineering consulting are compared.Provide relevant suggestions on how companies and individuals respond to industry development trends.展开更多
Background:China’s accelerating development and increasingly important role in global health engagement create a great demand for global health professionals including international consulting experts.This study repo...Background:China’s accelerating development and increasingly important role in global health engagement create a great demand for global health professionals including international consulting experts.This study reported the detailed development and evaluation of an international consulting training for global health workforce.Methods:Based on Kirkpatrick’s model,a mixed-methods approach was used to evaluate the effectiveness of the training.Quantitative and qualitative data on participants’reaction,learning,and application of the learned knowledge and skills were collected by a training evaluation survey at the ending of training and a follow-up interview in three months after the training.Results:Thirty-six participants attended the training and 34 of them completed quantitative investigation.The training satisfaction evaluations were positive,for which participants rated the training program highly and over 90%of them agreed with the usefulness of the training.About knowledge and skills change,participants showed improved consulting knowledge and skills from pre-to post-training(P<0.001).A total of 23 participants accepted follow-up interview,and most participants applied knowledge and skills learned from the training in their daily work or study.However,only 30.4%of participants applied their learning in the consulting program.The largest barrier of application was the lack of consulting opportunities.In addition,almost all the participants reported that they would be glad to attend more training courses in the future.Conclusion:The international consulting training program was well-received,and was feasible to improve the consulting service competence of global health professionals.According to participants’feedback,it is essential to develop and expand consulting training in the field of global health.展开更多
For many years,project management maturity models(PMMM)derived from the software industry have brought immeasurable benefits.However,the adoption and investigation of PMMM in the construction field have been weak and ...For many years,project management maturity models(PMMM)derived from the software industry have brought immeasurable benefits.However,the adoption and investigation of PMMM in the construction field have been weak and insufficient,particularly in construction consulting services(CCS).Moreover,professionals have gradually realized the importance of non-process factors(e.g.,teamwork,culture,leadership)in the evaluation of PMMM.This study describes the construction of PMMM for CCS that considers non-process factors and combines them with CCS-specific process factors.To verify the effectiveness of the proposed model,we conduct a case study on the overall project management consultancy for China’s 2010 Winter Expo.The results would fill in the PMMM research gap in CCS and provide practitioners with ideas to improve their performance.展开更多
In a digital world moving at a breakneck speed,consultancy services have emerged as one of the prominent resources for seeking effective,sustainable and economically viable solutions to a given crisis.The present day ...In a digital world moving at a breakneck speed,consultancy services have emerged as one of the prominent resources for seeking effective,sustainable and economically viable solutions to a given crisis.The present day consultancy services are aided by the use of multiple tools and techniques.However,ensuring the security of these tools and techniques is an important concern for the consultants because even a slight malfunction of any tool could alter the results drastically.Consultants usually tackle these functions after establishing the clients’needs and developing the appropriate strategy.Nevertheless,most of the consultants tend to focus more on the intended outcomes only and often ignore the security-specific issues.Our research study is an initiative to recommend the use of a hybrid computational technique based on fuzzy Analytical Hierarchy Process(AHP)and fuzzy Technique for Order Preference by Similarity to Ideal Solutions(TOPSIS)for prioritizing the tools and techniques that are used in consultancy services on the basis of their security features and efficacy.The empirical analysis conducted in this context shows that after implementing the assessment process,the rank of the tools and techniques obtained is:A7>A1>A4>A2>A3>A5>A6>A7,and General Electric McKinsey(GE-McKinsey)Nine-box Matrix(A7)obtained the highest rank.Thus,the outcomes show that this order of selection of the tools and techniques will give the most effective and secure services.The awareness about using the best tools and techniques in consultancy services is as important as selecting the most secure tool for solving a given problem.In this league,the results obtained in this study would be a conclusive and a reliable reference for the consultants.展开更多
China’s opening,reform and economicdevelopment,as well as the worldinformation technology revolution,hasenhanced China’s information consultancyservice.Before 1978,China’s economy wasa product economy governed by a...China’s opening,reform and economicdevelopment,as well as the worldinformation technology revolution,hasenhanced China’s information consultancyservice.Before 1978,China’s economy wasa product economy governed by a highly-centralized planning system with economicinformation basically based on statisticscollected from lower levels and planningcommands to lower levels.The annual productexchange meetings sponsored by specialeconomic departments became the mainchannels for information exchange,soinformation services basically failed to meetneeds.In 1979,China’s economy began itstransfer from a planned to a market one。展开更多
The Ministry of Education and the State Council Information Office have named Renmin University of China as one of the human rights national education and training bases. This shows the full affirmation and trust in t...The Ministry of Education and the State Council Information Office have named Renmin University of China as one of the human rights national education and training bases. This shows the full affirmation and trust in the university's education, research and training work and also represents encouragement for its future work.展开更多
文摘This paper first introduces the basic connotation of China’s whole-process engineering consulting.Immediately,analyze the organization model,service procurement model and charging standards of foreign whole-process engineering consulting(international terminology full-life cycle engineering consultant).Second,discuss the government’s role in the development of engineering consulting from two aspects:service management and market access.Finally,combined with the above analysis,the specific problems faced in the implementation process of the whole process engineering consulting are compared.Provide relevant suggestions on how companies and individuals respond to industry development trends.
基金funded by the China-UK Global Health Support Program(No.GHSP-CS-OP3-V04).
文摘Background:China’s accelerating development and increasingly important role in global health engagement create a great demand for global health professionals including international consulting experts.This study reported the detailed development and evaluation of an international consulting training for global health workforce.Methods:Based on Kirkpatrick’s model,a mixed-methods approach was used to evaluate the effectiveness of the training.Quantitative and qualitative data on participants’reaction,learning,and application of the learned knowledge and skills were collected by a training evaluation survey at the ending of training and a follow-up interview in three months after the training.Results:Thirty-six participants attended the training and 34 of them completed quantitative investigation.The training satisfaction evaluations were positive,for which participants rated the training program highly and over 90%of them agreed with the usefulness of the training.About knowledge and skills change,participants showed improved consulting knowledge and skills from pre-to post-training(P<0.001).A total of 23 participants accepted follow-up interview,and most participants applied knowledge and skills learned from the training in their daily work or study.However,only 30.4%of participants applied their learning in the consulting program.The largest barrier of application was the lack of consulting opportunities.In addition,almost all the participants reported that they would be glad to attend more training courses in the future.Conclusion:The international consulting training program was well-received,and was feasible to improve the consulting service competence of global health professionals.According to participants’feedback,it is essential to develop and expand consulting training in the field of global health.
文摘For many years,project management maturity models(PMMM)derived from the software industry have brought immeasurable benefits.However,the adoption and investigation of PMMM in the construction field have been weak and insufficient,particularly in construction consulting services(CCS).Moreover,professionals have gradually realized the importance of non-process factors(e.g.,teamwork,culture,leadership)in the evaluation of PMMM.This study describes the construction of PMMM for CCS that considers non-process factors and combines them with CCS-specific process factors.To verify the effectiveness of the proposed model,we conduct a case study on the overall project management consultancy for China’s 2010 Winter Expo.The results would fill in the PMMM research gap in CCS and provide practitioners with ideas to improve their performance.
基金Funding for this study was received from the Taif University Researchers Supporting Projects at Taif University,Kingdom of Saudi Arabia under Grant No.TURSP-2020/254.
文摘In a digital world moving at a breakneck speed,consultancy services have emerged as one of the prominent resources for seeking effective,sustainable and economically viable solutions to a given crisis.The present day consultancy services are aided by the use of multiple tools and techniques.However,ensuring the security of these tools and techniques is an important concern for the consultants because even a slight malfunction of any tool could alter the results drastically.Consultants usually tackle these functions after establishing the clients’needs and developing the appropriate strategy.Nevertheless,most of the consultants tend to focus more on the intended outcomes only and often ignore the security-specific issues.Our research study is an initiative to recommend the use of a hybrid computational technique based on fuzzy Analytical Hierarchy Process(AHP)and fuzzy Technique for Order Preference by Similarity to Ideal Solutions(TOPSIS)for prioritizing the tools and techniques that are used in consultancy services on the basis of their security features and efficacy.The empirical analysis conducted in this context shows that after implementing the assessment process,the rank of the tools and techniques obtained is:A7>A1>A4>A2>A3>A5>A6>A7,and General Electric McKinsey(GE-McKinsey)Nine-box Matrix(A7)obtained the highest rank.Thus,the outcomes show that this order of selection of the tools and techniques will give the most effective and secure services.The awareness about using the best tools and techniques in consultancy services is as important as selecting the most secure tool for solving a given problem.In this league,the results obtained in this study would be a conclusive and a reliable reference for the consultants.
文摘China’s opening,reform and economicdevelopment,as well as the worldinformation technology revolution,hasenhanced China’s information consultancyservice.Before 1978,China’s economy wasa product economy governed by a highly-centralized planning system with economicinformation basically based on statisticscollected from lower levels and planningcommands to lower levels.The annual productexchange meetings sponsored by specialeconomic departments became the mainchannels for information exchange,soinformation services basically failed to meetneeds.In 1979,China’s economy began itstransfer from a planned to a market one。
文摘The Ministry of Education and the State Council Information Office have named Renmin University of China as one of the human rights national education and training bases. This shows the full affirmation and trust in the university's education, research and training work and also represents encouragement for its future work.