FEM simulation and experimental verification of roll forming and springback process under complex contact conditions

The application of advanced high strength steel （AHSS） has an important significance in the development of the lightweight of automobile, but the parts made of AHSS usually have defects, such as fracture and large amount of springback, etc. In this paper, a model of multi-pass roll form- ing and springback process of AHSS is established with finite element software ABAQUS. Then a roll forming experiment is performed, and simulation and experimental results have been compared and analyzed. The model is established under complex contact conditions, including self-contact condi- tion. The results shows that during the process of sheet bending, large Mises stresses appear at ben- ding corners. The smaller the bending radius is, the larger the Mises stress and strain are. Thick- ness of sheet metal changes exceeds a certain limit, the differently if the bending radius is different. When the bending radius change tendency of the sheet thickness turns from increase to decrease.

Experimental investigation of p-section concrete beams under contact explosion and close-in explosion conditions

This paper presents the results of an experimental investigation on explosive breaching of p-section concrete beams. Twenty three p-section concrete beams with a 100 cm length were tested. TNT charges were placed at three positions: contact detonation in the center, contact detonation above the web and close-in detonation in the center. The external and internal breach parameters of the panels were evaluated by measuring the diameter of the ejection crater, spalling crater and breach hole created by the charge detonation. The experimental results were compared to predict values obtained by the analytical models proposed by McVay, Morishita and Remennikov. A modified breach with crater limit line and breach without crater limit line were put forward based on the experimental results. The maximum cross-sectional destruction area ratio(MCDAR) values were used to evaluate the damage degree. The maximum value of MCDAR reached 0.331 corresponding to the C5 experimental condition, of which explosion occurred above the web.

Influence of Friction Interface Contact on Ultrasonic Motor Efficiency Under Static Conditions

The friction interface matching plays a deterministic role in the motor efficiency,and the microcosmic contact status of friction interface should be investigated to improve the ultrasonic motor performance.The main purpose is to improve the effective output power of ultrasonic motor.Hence,one studies the contact condition of the friction interface of the ultrasonic motor,analyzes the micro condition of contact interface through finite element analysis,optimizes unreasonable structures,and compares the two different-structure ultrasonic motors through experiments.The results reflect the necessity of optimization.After optimization,the stator and rotor deform after pre-pressure and the contact interface of them full contact theoretically.When reaching heat balance the effective output of the motor is 37%,and the average effective output efficiency is 2.384 times higher than that of the unoptimized.It can be seen that the total consumption of the ultrasonic motor system decreases significantly.Therefore,when using in certain system the consumption taken from the system will decreases largely,especially in the system with a strict consumption control.

Force Based Skill Learning for Robot Tasks in Contact Conditions

To acquire human operation skill based on force sense, element contact form (ECF) is proposed to describe contact condition firstly. The skill is modeled as a sequence of discrete ECFs. Since different ECF has different force distribution, a support vector machine classifier is built to identify the contact conditions according to the force signal. Finally, the robot can obtain the skill from the human demonstration.

A Review of Contact Electrification at Diversified Interfaces and Related Applications on Triboelectric Nanogenerator

The triboelectric nanogenerator(TENG)can effectively collect energy based on contact electrification(CE)at diverse interfaces,including solid–solid,liquid–solid,liquid–liquid,gas–solid,and gas–liquid.This enables energy harvesting from sources such as water,wind,and sound.In this review,we provide an overview of the coexistence of electron and ion transfer in the CE process.We elucidate the diverse dominant mechanisms observed at different interfaces and emphasize the interconnectedness and complementary nature of interface studies.The review also offers a comprehensive summary of the factors influencing charge transfer and the advancements in interfacial modification techniques.Additionally,we highlight the wide range of applications stemming from the distinctive characteristics of charge transfer at various interfaces.Finally,this review elucidates the future opportunities and challenges that interface CE may encounter.We anticipate that this review can offer valuable insights for future research on interface CE and facilitate the continued development and industrialization of TENG.

Genesis of LCT Pegmatites during Early Paleozoic Orogeny of the North Qinling Orogenic Belt,China:Emplacement Conditions and Structural Control

The Guanpo pegmatite field in the North Qinling orogenic belt(NQB),China,hosts the most abundant LCT pegmatites.However,their emplacement conditions and structural control remain unexplored.In this contribution,we investigated it combining pegmatite orientation measurement with oxygen isotope geothermometry and fluid inclusion study.The orientations of type A1 pegmatites(P_(f)<σ_(2))are predominantly influenced by P-and T-fractures due to simple shearing in Shiziping dextral thrust shear zone during D_(2)deformation,whereas type A2 pegmatites(contemporaneous with D_(4))are governed by hydraulic fractures aligned with S_(0)and S_(0+1)stemming from fluid pressure(P_(f)<σ_(2)).Additionally,type B pegmatites(P_(f)≤σ_(2))exhibit orientations shaped by en echelon extensional fractures in local ductile shear zones(contemporaneous with D_(3)).The albite-quartz oxygen isotope geothermometry and microthermometric analysis of fluid inclusions in elbaites from the latest pegmatites(including types B and A2)suggest that the crystallization P-T for late magmatic and hydrothermal stages are 527.5-559.2℃,320℃,3.1-3.6 kbar and 2.0 kbar,respectively.Our observations along with previous studies suggest that the genesis of the LCT pegmatites was a long-term,multi-stage event during early Paleozoic orogeny(including the collision stage)of the NQB,and was facilitated by various local fractures.

Changes of China’s Status in the Global System and Its Influencing Factors:A Multiple Contact Networks Perspective

Clarifying China’s position in the global system is an important logical basis for developing national diplomacy.Although much research has been done on China’s development status,most studies have been based on country comparisons or institutional en-vironment.In today’s networked era in which the global economy,trade,personnel,and information are closely connected,studies on China’s global position and its status changes and influencing factors in multiple contact networks are still insufficient.In this study,from the perspective of diverse global contact networks,we constructed economic,cultural,and political influence indices to explore the changes and influencing factors on China’s status in the global system from 2005 to 2018.The results show that during the study period,China’s global influence in the fields of economic ties,cultural exchanges,and political contacts increased significantly,but its influ-ence in the fields of cultural exchanges and political contacts lagged far economic ties.The pattern of China’s economic influence on various economies around the world has shown a transformation from an‘upright pyramid’to an‘inverted pyramid’structure.The proportion of these economies in low-influence zones has decreased from more than 60%in 2005 to less than 20%in 2018.China’s cultural and political influence on various economies around the world has increased significantly;however,for the former,the percentage of high-influence areas is still less than 20%,whereas for the latter the percentage of these economies in medium-and high-influence areas is still less than 50%.Analyses such as a scatter plot matrix show that geographical proximity,economic globalization,close cooperation with developing countries,and a proactive and peaceful foreign policy are important factors in improving China’s status in the diverse global network system.

Igneous intrusion contact metamorphic system and its reservoir characteristics:A case study of Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin,China

Taking the Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin as an example,this study comprehensively utilizes seismic,mud logging,well logging,physical property analysis and core thin section data to investigate the metamorphic reservoir formed by contact metamorphism after igneous rock intrusion.(1)A geological model of the igneous intrusion contact met amorphic system is proposed,which can be divided into five structural layers vertically:the intrusion,upper metamorphic aureole,lower metamorphic aureole,normal sedimentary layers on the roof and floor.(2)The intrusion is characterized by xenoliths indicating intrusive facies at the top,regular changes in rock texture and mineral crystallization from the center to the edge on a microscopic scale,and low-angle oblique penetrations of the intrusion through sedimentary strata on a macroscopic scale.The metamorphic aureole has characteristics such as sedimentary rocks as the host rock,typical palimpsest textures developed,various low-temperature thermal metamorphic minerals developed,and medium-low grade thermal metamorphic rocks as the lithology.(3)The reservoir in contact metamorphic aureole has two types of reservoir spaces:matrix pores and fractures.The matrix pores are secondary"intergranular pores"distributed around metamorphic minerals after thermal metamorphic transformation in metasandstones.The fractures are mainly structural fractures and intrusive compressive fractures in metamudstones.The reservoirs generally have three spatial distribution characteristics:layered,porphyritic and hydrocarbon impregnation along fracture.(4)The distribution of reservoirs in the metamorphic aureole is mainly controlled by the intensity of thermal baking.Furthermore,the distribution of favorable reservoirs is controlled by the coupling of favorable lithofacies and thermal contact metamorphism,intrusive compression and hydrothermal dissolution.The proposal and application of the geological model of the intrusion contact metamorphic system are expected to promote the discovery of exploration targets of contact metamorphic rock in Nanpu sag,and provide a reference for the study and exploration of deep contact metamorphic rock reservoirs in the Bohai Bay Basin.

The manipulation of rectifying contact of Co and nitrogen-doped carbon hierarchical superstructures toward high-performance oxygen reduction reaction

Rational design and construction of oxygen reduction reaction(ORR)electrocatalysts with high activity,good stability,and low price are essential for the practical applications of renewable energy conversion devices,such as metal-air batteries.Electronic modification through constructing metal/semiconductor Schottky heterointerface represents a powerful strategy to enhance the electrochemical performance.Herein,we demonstrate a concept of Schottky electrocatalyst composed of uniform Co nanoparticles in situ anchored on the carbon nanotubes aligned on the carbon nanosheets(denoted as Co@N-CNTs/NSs hereafter)toward ORR.Both experimental findings and theoretical simulation testify that the rectifying contact could impel the voluntary electron flow from Co to N-CNTs/NSs and create an internal electric field,thereby boosting the electron transfer rate and improving the intrinsic activity.As a consequence,the Co@N-CNTs/NSs deliver outstanding ORR activity,impressive long-term durability,excellent methanol tolerance,and good performance as the air-cathode in the Zn-air batteries.The design concept of Schottky contact may provide the innovational inspirations for the synthesis of advanced catalysts in sustainable energy conversion fields.

Thermal-contact capacity of one-dimensional attractive Gaudin-Yang model

Tan's contact C is an important quantity measuring the two-body correlations at short distances in a dilute system.Here we make use of the technique of exactly solved models to study the thermal-contact capacity K_(T),i.e.,the derivative of C with respect to temperature in the attractive Gaudin-Yang model.It is found that K_(T) is useful in identifying the low temperature phase diagram,and using the obtained analytical expression of K_(T),we study its critical behavior and the scaling law.Especially,we show K_(T) versus temperature and thus the non-monotonic tendency of C in a tiny interval,for both spin-balanced and imbalanced phases.Such a phenomenon is merely observed in multi-component systems such as SU(2)Fermi gases and spinor bosons,indicating the crossover from the Tomonaga-Luttinger liquid to the spin-coherent liquid.

Investigation of contact behavior on a model of the dual-mobility artificial hip joint for Asians in different inner liner thicknesses

BACKGROUND The four components that make up the current dual-mobility artificial hip joint design are the femoral head,the inner liner,the outer liner as a metal cover to prevent wear,and the acetabular cup.The acetabular cup and the outer liner were constructed of 316L stainless steel.At the same time,the inner liner was made of ultra-high-molecular-weight polyethylene(UHMWPE).As this new dual-mobility artificial hip joint has not been researched extensively,more tribological research is needed to predict wear.The thickness of the inner liner is a significant component to consider when calculating the contact pressure.AIM To make use of finite element analysis to gain a better understanding of the contact behavior in various inner liner thicknesses on a new model of a dual-mobility artificial hip joint,with the ultimate objective of determining the inner liner thickness that was most suitable for this particular type of dual-mobility artificial hip joint.METHODS In this study,the size of the femoral head was compared between two diameters(28 mm and 36 mm)and eight inner liner thicknesses ranging from 5 mm to 12 mm.Using the finite element method,the contact parameters,including the maximum contact pressure and contact area,have been evaluated in light of the Hertzian contact theory.The simulation was performed statically with dissipated energy and asymmetric behavior.The types of interaction were surface-to-surface contact and normal contact behavior.RESULTS The maximum contact pressures in the inner liner(UHMWPE)at a head diameter of 28 mm and 36 mm are between 3.7-13.5 MPa and 2.7-10.4 MPa,respectively.The maximum von Mises of the inner liner,outer liner,and acetabular cup are 2.4–11.4 MPa,15.7–44.3 MPa,and 3.7–12.6 MPa,respectively,for 28 mm head.Then the maximum von Mises stresses of the 36 mm head are 1.9-8.9 MPa for the inner liner,9.9-32.8 MPa for the outer liner,and 2.6-9.9 MPa for the acetabular cup.A head with a diameter of 28 mm should have an inner liner with a thickness of 12 mm.Whereas the head diameter was 36 mm,an inner liner thickness of 8 mm was suitable.CONCLUSION The contact pressures and von Mises stresses generated during this research can potentially be exploited in estimating the wear of dual-mobility artificial hip joints in general.Contact pressure and von Mises stress reduce with an increasing head diameter and inner liner’s thickness.Present findings would become one of the references for orthopedic surgery for choosing suitable bearing geometric parameter of hip implant.

In situ non-destructive measurement of Josephson junction resistance using fritting contact technique

Conventional four-probe methods for measuring the resistance of Josephson junctions can damage superconducting thin films,making them unsuitable for frequency measurements of superconducting qubits.In this study,we present a custom probe station measurement system that employs the fritting contact technique to achieve in situ,non-destructive measurements of Josephson junction resistance.Our experimental results demonstrate that this method allows for accurate prediction of qubit frequency with an error margin of 17.2 MHz.Moreover,the fritting contact technique does not significantly affect qubit coherence time or the integrity of the superconducting film,confirming its non-destructive nature.This innovative approach provides a dependable foundation for frequency tuning and addressing frequency collision issues,thus supporting the advancement and practical deployment of superconducting quantum computing.

Effect of surface modification on the radiation stability of diamond ohmic contacts

The ohmic contact interface between diamond and metal is essential for the application of diamond detectors.Surface modification can significantly affect the contact performance and eliminate the interface polarization effect.However,the radiation stability of a diamond detector is also sensitive to surface modification.In this work,the influence of surface modification technology on a diamond ohmic contact under high-energy radiation was investigated.Before radiation,the specific contact resistivities(ρc)between Ti/Pt/Au-hydrogen-terminated diamond(H-diamond)and Ti/Pt/Au-oxygenterminated diamond(O-diamond)were 2.0×10^(-4)W·cm^(2) and 4.3×10^(-3)Wcm^(2),respectively.After 10 MeV electron radiation,the ρc of Ti/Pt/Au H-diamond and Ti/Pt/Au O-diamond were 5.3×10^(-3)W·cm^(2)and 9.1×10^(-3)W·cm^(2),respectively.The rates of change of ρc of H-diamond and O-diamond after radiation were 2550%and 112%,respectively.The electron radiation promotes bond reconstruction of the diamond surface,resulting in an increase in ρc.

Supposition of graphene stacks to estimate the contact resistance and conductivity of nanocomposites

In this study,the effects of stacked nanosheets and the surrounding interphase zone on the resistance of the contact region between nanosheets and the tunneling conductivity of samples are evaluated with developed equations superior to those previously reported.The contact resistance and nanocomposite conductivity are modeled by several influencing factors,including stack properties,interphase depth,tunneling size,and contact diameter.The developed model's accuracy is verified through numerous experimental measurements.To further validate the models and establish correlations between parameters,the effects of all the variables on contact resistance and nanocomposite conductivity are analyzed.Notably,the contact resistance is primarily dependent on the polymer tunnel resistivity,contact area,and tunneling size.The dimensions of the graphene nanosheets significantly influence the conductivity,which ranges from 0 S/m to90 S/m.An increased number of nanosheets in stacks and a larger gap between them enhance the nanocomposite's conductivity.Furthermore,the thicker interphase and smaller tunneling size can lead to higher sample conductivity due to their optimistic effects on the percolation threshold and network efficacy.

Heterogeneities of grain boundary contact for simulation of laboratoryscale mechanical behavior of granitic rocks

From a practical point of view,grain structure heterogeneities are key parameters that control the rock response and still remains a challenge to incorporate in a quantitative manner.One of the less discussed topics in the context of the grain-based model(GBM)in the particle flow code(PFC)is the contact heterogeneities and the appropriate contact model to mimic the grain boundary behavior.Generally,the smooth joint(SJ)model and linear parallel bond(LPB)model are used to simulate the grain boundary behavior.However,the literature does not document the suitability of different models for specific problems.Another challenge in implementing GBM in PFC is that only a single bonding parameter is used at the grain boundaries.The aim of this study is to investigate the responses of a laboratory-scale specimen with SJ and LPB models,considering grain boundary heterogeneous and homogeneous contact parameters.Uniaxial and biaxial compression tests are performed to calibrate the response of Creighton granite.The stressestrain curves,volumetric dilation,inter-crack(crack in the grain boundary),and intra-crack(crack within the grain)development,and failure patterns associated with different contact models are examined.It was found that both the SJ and LPB models can reproduce the pre-peak behavior observed for a granitic rock type.However,the LPB model is unable to reproduce the post-peak behavior.Due to the large interlocking effect originating from the balls in contact and the ball size in the LPB model,local dilation is induced at the grain boundaries.This overestimates the volumetric dilation and residual shear strength.The LPB model tends to result in discontinuous inter-cracks and stress localization in the rock specimen,resulting in fine fragments at the rock surface during failure.

A hybrid contact approach for modeling soil-structure interaction using the material point method

The grid-based multi-velocity field technique has become increasingly popular for simulating the Material Point Method(MPM)in contact problems.However,this traditional technique has some shortcomings,such as(1)early contact and contact penetration can occur when the contact conditions are unsuitable,and(2)the method is not available for contact problems involving rigid-nonrigid materials,which can cause numerical instability.This study presents a new hybrid contact approach for the MPM to address these limitations to simulate the soil and structure interactions.The approach combines the advantages of point-point and point-segment contacts to implement contact detection,satisfying the impenetrability condition and smoothing the corner contact problem.The proposed approach is first validated through a disk test on an inclined slope.Then,several typical cases,such as granular collapse,bearing capacity,and deformation of a flexible retaining wall,are simulated to demonstrate the robustness of the proposed approach compared with FEM or analytical solutions.Finally,the proposed method is used to simulate the impact of sand flow on a deformable structure.The results show that the proposed contact approach can well describe the phenomenon of soil-structure interaction problems.

Application of Isogeometric Analysis Method in Three-Dimensional Gear Contact Analysis

Gears are pivotal in mechanical drives,and gear contact analysis is a typically difficult problem to solve.Emerging isogeometric analysis(IGA)methods have developed new ideas to solve this problem.In this paper,a threedimensional body parametric gear model of IGA is established,and a theoretical formula is derived to realize single-tooth contact analysis.Results were benchmarked against those obtained from commercial software utilizing the finite element analysis(FEA)method to validate the accuracy of our approach.Our findings indicate that the IGA-based contact algorithmsuccessfullymet theHertz contact test.When juxtaposed with the FEA approach,the IGAmethod demonstrated fewer node degrees of freedomand reduced computational units,all whilemaintaining comparable accuracy.Notably,the IGA method appeared to exhibit consistency in analysis accuracy irrespective of computational unit density,and also significantlymitigated non-physical oscillations in contact stress across the tooth width.This underscores the prowess of IGA in contact analysis.In conclusion,IGA emerges as a potent tool for addressing contact analysis challenges and holds significant promise for 3D gear modeling,simulation,and optimization of various mechanical components.

Analytical modeling and approaches of multihelix cables incorporating with interwire mutual contacts

This study aims to develop an analytical model based on the curve beam theory to capture the mechanical response of a multihelix cable considering the internal contact displacements.Accordingly,a double-helix cable subjected to axial tension and torsion is analyzed,and both the line and point contacts between the neighboring wires and strands are considered via an equivalent homogenized approach.Then,the proposed theoretical model is extended to a hierarchical multihelix cable with mutual contact displacements by constructing a recursive relationship between the high-and low-level multihelix structures.The global tensile stiffness and torsional stiffness of the double-helix cable are successfully evaluated.The results are validated by a finite element(FE)model,and are found to be consistent with the findings of previous studies.It is shown that the contact deformations in multihelix cables significantly affect their equivalent mechanical stiffness,and the contact displacements are remarkably enhanced as the helix angles increase.This study provides insights into the interwire/interstrand mutual contact effects on global and local responses.

Advancing high-speed train gearbox durability:enhanced bearing load and contact stress through transition from helical to herringbone gears

High-speed trains typically utilize helical gear transmissions,which significantly impact the bearing load capacity and fatigue service performance of the gearbox bearings.This paper focuses on the gearbox bearings,establishing dynamic models for both helical gear and herringbone gear transmissions in high-speed trains.The modeling particularly emphasizes the precision of the bearings at the gearbox's pinion and gear wheels.Using this model,a comparative analysis is conducted on the bearing loads and contact stresses of the gearbox bearings under uniform-speed operation between the two gear transmissions.The findings reveal that the helical gear transmission generates axial forces leading to severe load imbalance on the bearings at both sides of the large gear,and this imbalance intensifies with the increase in train speed.Consequently,this results in a significant increase in contact stress on the bearings on one side.The adoption of herringbone gear transmission effectively suppresses axial forces,resolving the load imbalance issue and substantially reducing the contact stress on the originally biased side of the bearings.The study demonstrates that employing herringbone gear transmission can significantly enhance the service performance of high-speed train gearbox bearings,thereby extending their service life.

Oscillation properties of eigenfunctions for Sturm-Liouville problems with interface conditions via Prufer transformation

A class of Sturm-Liouville problems with discontinuity is studied in this paper.The oscillation properties of eigenfunctions for Sturm-Liouville problems with interface conditions are obtained.The main method used in this paper is based on Prufer transformation,which is different from the classical ones.Moreover,we give two examples to verify our main results.