Physical mechanism of oxygen diffusion in the formation of Ga_(2)O_(3) Ohmic contacts

The formation of low-resistance Ohmic contacts in Ga_(2)O_(3) is crucial for high-performance electronic devices. Conventionally, a titanium/gold(Ti/Au) electrode is rapidly annealed to achieve Ohmic contacts, resulting in mutual diffusion of atoms at the interface. However, the specific role of diffusing elements in Ohmic contact formation remains unclear.In this work, we investigate the contribution of oxygen atom diffusion to the formation of Ohmic contacts in Ga_(2)O_(3). We prepare a Ti/Au electrode on a single crystal substrate and conduct a series of electrical and structural characterizations.Using density functional theory, we construct a model of the interface and calculate the charge density, partial density of states, planar electrostatic potential energy, and I–V characteristics. Our results demonstrate that the oxygen atom diffusion effectively reduces the interface barrier, leading to low-resistance Ohmic contacts in Ga_(2)O_(3). These findings provide valuable insights into the underlying mechanisms of Ohmic contact formation and highlight the importance of considering the oxygen atom diffusion in the design of Ga_(2)O_(3)-based electronic devices.

Effect of surface modification on the radiation stability of diamond ohmic contacts

The ohmic contact interface between diamond and metal is essential for the application of diamond detectors.Surface modification can significantly affect the contact performance and eliminate the interface polarization effect.However,the radiation stability of a diamond detector is also sensitive to surface modification.In this work,the influence of surface modification technology on a diamond ohmic contact under high-energy radiation was investigated.Before radiation,the specific contact resistivities(ρc)between Ti/Pt/Au-hydrogen-terminated diamond(H-diamond)and Ti/Pt/Au-oxygenterminated diamond(O-diamond)were 2.0×10^(-4)W·cm^(2) and 4.3×10^(-3)Wcm^(2),respectively.After 10 MeV electron radiation,the ρc of Ti/Pt/Au H-diamond and Ti/Pt/Au O-diamond were 5.3×10^(-3)W·cm^(2)and 9.1×10^(-3)W·cm^(2),respectively.The rates of change of ρc of H-diamond and O-diamond after radiation were 2550%and 112%,respectively.The electron radiation promotes bond reconstruction of the diamond surface,resulting in an increase in ρc.

Analytical modeling and approaches of multihelix cables incorporating with interwire mutual contacts

This study aims to develop an analytical model based on the curve beam theory to capture the mechanical response of a multihelix cable considering the internal contact displacements.Accordingly,a double-helix cable subjected to axial tension and torsion is analyzed,and both the line and point contacts between the neighboring wires and strands are considered via an equivalent homogenized approach.Then,the proposed theoretical model is extended to a hierarchical multihelix cable with mutual contact displacements by constructing a recursive relationship between the high-and low-level multihelix structures.The global tensile stiffness and torsional stiffness of the double-helix cable are successfully evaluated.The results are validated by a finite element(FE)model,and are found to be consistent with the findings of previous studies.It is shown that the contact deformations in multihelix cables significantly affect their equivalent mechanical stiffness,and the contact displacements are remarkably enhanced as the helix angles increase.This study provides insights into the interwire/interstrand mutual contact effects on global and local responses.

Fluid property identification of the Lower Cretaceous reservoirs with complex oil-water contacts in Deseo Basin,Chad

Recently,exploration breakthroughs have been made in the Lower Cretaceous sandstone reservoirs in the Doseo Basin,but the identification of reservoir fluid property is difficult due to variable reservoir lithology,complex oil-water contact within and faint responses of the oil zone,which causes the lower accuracy of reservoir fluid property identification with conventional mudlogging and wirelogging techniques.Applying the geochemical logging,fluorescent logging,mud logging and cutting logging technology,in combination with formation test data,this paper distinguishes the crude oil types,analyzes the logging response characteristics of oil zone after water washing,and establishes the interpretation charts and parameter standards for reservoir fluid properties.The crude oil can be divided into two types,namely viscous-heavy and thin-light,based on total hydrocarbon content and component concentration tested by mud logging,features of pyrolysis gas chromatogram and fluorescence spectroscopy.The general characteristics of oil layers experienced water washing include the decrease of total hydrocarbon content and component concentration from mud logging,the decrease of S1 and PS values from geochemical logging,the decrease of hydrocarbon abundance and absence of some light components in pyrolysis gas chromatogram,and the decrease of fluorescence area and intensity from fluorescence logging.According to crude oil types,the cross plots of S1 versus peak-baseline ratio,and the cross plots of rock wettability versus fluorescence area ratio are drawn and used to interpret reservoir fluid property.Meanwhile,the standards of reservoir fluid parameter are established combining with the parameters of PS and the parameters in above charts,and comprehensive multiparameter correlation in both vertical and horizontal ways is also performed to interpret reservoir fluid property.The application in the Doseo Basin achieved great success,improving interpretation ability of fluid property in the reservoir with complex oil-water contact,and also provided technical reference for the efficient exploration and development of similar reservoirs.

Study on the Effect of Behavioral Interventions Based on the Theory of“Knowledge,Attitude,Practice”on Tuberculosis Cognitive Level of Close Contacts

Objective:Based on the theory of“Knowledge,Attitude,Practice,”health education was carried out for close contact with tuberculosis(TB)at a university in Beijing,and its impact on the students’awareness of TB was studied.This study could provide a reference for effective health education interventions among close contacts of TB in undergraduates.Methods:102 undergraduates who had close contact with one confirmed case of pulmonary TB in April 2021 at a university were randomly divided into a control group and an intervention group.The intervention group was given the“Knowledge,Attitude,Practice”health education intervention by professionally trained doctors,and were asked to complete a self-designed TB-related questionnaire before and after the intervention.Both groups performed the Tuberculin Skin Test(TST)and chest X-ray(CR)examination.Results:The rate of the TST test was 18.6%,and CR examination showed 0 cases of pulmonary TB.The survey results showed that the TB awareness rate(96.1%,49/51)in the intervention group was significantly higher than that of the control group(51.0%,26/51),and the differences in awareness rate between the two groups were statistically significant(P<0.05).Regarding the attitude/skills toward TB,the prevalence rate of tuberculosis-related attitude/behavior in the intervention group(94.1%,47/51)was significantly higher than that of the control group(60.8%,31/51),and the differences between the two groups were statistically significant(P<0.05).Conclusion:Both self-controlled and parallel-controlled studies showed that the health education intervention of“Knowledge,Attitude,Practice”improved the awareness of TB among close contacts of TB in undergraduates.

Pulsed Laser Annealed Ga Hyperdoped Poly-Si/SiO_(x)Passivating Contacts for High-Efficiency Monocrystalline Si Solar Cells

Polycrystalline Si(poly-Si)-based passivating contacts are promising candidates for high-efficiency crystalline Si solar cells.We show that nanosecond-scale pulsed laser melting(PLM)is an industrially viable technique to fabricate such contacts with precisely controlled dopant concentration profiles that exceed the solid solubility limit.We demonstrate that conventionally doped,hole-selective poly-Si/SiO_(x)contacts that provide poor surface passivation of c-Si can be replaced with Ga-or B-doped contacts based on non-equilibrium doping.We overcome the solid solubility limit for both dopants in poly-Si by rapid cooling and recrystallization over a timescale of∼25 ns.We show an active Ga dopant concentration of∼3×10^(20)cm^(−3)in poly-Si which is six times higher than its solubility limit in c-Si,and a B dopant concentration as high as∼10^(21) cm^(−3).We measure an implied open-circuit voltage of 735 mV for Ga-doped poly-Si/SiO_(x)contacts on Czochralski Si with a low contact resistivity of 35.5±2.4 mΩcm^(2).Scanning spreading resistance microscopy and Kelvin probe force microscopy show large diffusion and drift current in the p-n junction that contributes to the low contact resistivity.Our results suggest that PLM can be extended for hyperdoping of other semiconductors with low solubility atoms to enable high-efficiency devices.

Low-resistance ohmic contacts on InAlN/GaN heterostructures with MOCVD-regrown n+-InGaN and mask-free regrowth process

This paper studied the low-resistance ohmic contacts on InAlN/GaN with metal–organic chemical vapor deposition(MOCVD)regrowth technique.The 150-nm regrown n-InGaN exhibits a low sheet resistance of 31Ω/□,resulting in an extremely low contact resistance of 0.102Ω·mm between n^(+)-InGaN and InAlN/GaN channels.Mask-free regrowth process was also used to significantly improve the sheet resistance of InAlN/GaN with MOCVD regrown ohmic contacts.Then,the diffusion mechanism between n^(+)-InGaN and InAlN during regrowth process was investigated with electrical and structural characterizations,which could benefit the further process optimization.

Arc erosion of AgSnO_2 electrical contacts at different stages of a break operation

Arc erosion studies are conducted on AgSnO2 contact materials at different stages in the break operation. A resistive load arrangement is used with up to 42 V DC at 24 A and a constant contact opening velocity. The arc current is terminated at different stages as the arc is drawn between the contacts enabling a study of the arcing phenomena up to that point. Surface profiling of the contacts is conducted to determine the extent of erosion at the different stages as the arc is drawn. Spectral analysis is also conducted on the arc and then related to the extent of erosion. The results show that particular features occur at different stages as the arc is drawn. As the arc is initially established, it goes through an ＂Arc Generation＂ regime where the arc roots are small and immobile on both the anode and the cathode. Material transfer occurs mainly from anode to cathode. The spectral analysis indicates that Sn and O species dominate the arc followed by the Ag species. As the arc is drawn further and enters the ＂Arc Degeneration＂ regime, the anode undergoes significantly larger erosion than the cathode. Also, both contacts indicate that multiple arc roots have formed, which are highly mobile in the later stages of the discharge. The spectral analysis indicates that Ag and N species are in high concentrations compared to other species. The mechanisms of erosion and deposition are discussed in relation to the species within the arc discharge. For the complete break operation, it is found that the anode undergoes major erosion, and it is thought that the gaseous ions species do not dominate the arc under these conditions of short arcs and voltage 〈42 V to cause cathode erosion.

Direct Tunneling Effect in Metal-Semiconductor Contacts Simulated with Monte Carlo Method

Considering the tunneling effect and the Schottky effect,the metal semiconductor contact is simulated by using self consistent ensemble Monte Carlo method.Under different biases or at different barrier heights,the investigation into the tunneling current indicates that the tunneling effect is of great importance under reverse biases.The Schottky barrier diode current due to Schottky effect is in agreement with the theoretical one.The barrier lowering is found a profound effect on the current transport at the metal semiconductor interface.

Evidence of the Role of Carbon Vacancies in Nickel-Based Ohmic Contacts to n-Type Silicon Carbide

N-wells are created by P＋ ion implantation into Si-faced p-type 4H-SiC epilayer. Ti and Ni are deposited in sequence on the surface of the active regions. Ni2Si is identified as the dominant phase by X-ray diffraction （XRD） analysis after metallization annealing. An amorphous C film at the Ni2 Si/SiC interface is confirmed by an X-ray energy-dispersive spectrometer （XEDS）. The Ni2Si and amorphous C film are etched away selectively,followed by deposition of new metal films without annealing. Measurement of the current-voltage characteristics shows that the contacts are still ohmic after the Ni2 Si and amorphous C film are replaced by new metal films. The sheet resistance Rsh of the implanted layers decreases from 975 to 438f2/D, because carbon vacancies （Vc） appeared during annealing,which act as donors for electrons in SiC.

Friction Characteristics of Nanoscale Sliding Contacts between Multi-Asperity Tips and Textured Surfaces

Nanoscale sliding contacts of smooth surfaces or between a single asperity and a smooth surface have been widely investigated by molecular dynamics simulations, while there are few studies on the sliding contacts between two rough surfaces. Actually, the friction of two rough surfaces considering interactions between more asperities should be more realistic. By using multiscale method, friction characteristics of two dimensional nanoscale sliding contacts between rigid multi-asperity tips and elastic textured surfaces are investigated. Four nanoscale textured surfaces with different texture shapes are designed, and six multi-asperity tips composed of cylindrical asperities with different radii are used to slide on the textured surfaces. Friction forces are compared for different tips, and effects of the asperity radii on the friction characteristics are investigated. Average friction forces for all the cases are listed and compared, and effects of texture shapes of the textured surfaces are discussed. The results show that textured surface II has a better structure to reduce friction forces. The multi-asperity tips composed of asperities with R=20r0 （r0=0.227 7 nm） or R=30r0 get higher friction forces compared with other cases, and more atoms of the textured surfaces are taken away by these two tips, which are harmful to reduce friction or wear. For the case of R=10ro, friction forces are also high due to large contact areas, but the sliding processes are stable and few atoms are taken away by the tip. The proposed research considers interactions between more asperities to make the model approach to the real sliding contact problems. The results will help to vary or even control friction characteristics by textured surfaces, or provide references to the design of textured surfaces.

Technical research on optimization design of contacts of electrical connector

Pin and socket contacts are the key parts of electrical connector as aerospace electronic components. The contacts are also the direct carriers for signal transmitting of electronic equipments, passing the signal from the input end to the output end of electrical connector. The reliability of pin and socket contacts directly influences signal transmission. The goal of this study is to enhance the contact reliability of aerospace electrical connector. Computer simulation analysis was made on contacts performance data by utilizing the simulation system developed by PCL Language of MSC software. Furthermore, the results were experi- mentally validated so as to realize the objective of optimizing contacts design.

High-Frequency AlGaN/GaN High-Electron-Mobility Transistors with Regrown Ohmic Contacts by Metal-Organic Chemical Vapor Deposition

Nonalloyed ohmic contacts regrown by metal-organic chemical vapor deposition are performed on AlGaN/GaN high-electron-mobility transistors. Low ohmic contact resistance of 0.15Ω.mm is obtained. It is found that the sidewall obliquity near the regrown interface induced by the plasma dry etching has great influence on the total contact resistance. The fabricated device with a 100-nm T-shaped gate demonstrates a maximum drain current density of 0.95 A/mm at Vgs = 1 V and a maximum peak extrinsic transcondutance Gm of 216mS/ram. Moreover, a current gain cut-off frequency fT of 115 GHz and a maximum oscillation frequency fmax of 127 GHz are achieved.

ELASTOHYDRODYNAMIC LUBRICATION OF LOGARITHMIC PROFILE ROLLER CONTACTS

An account of numerical solutions to the isothermal and flooded elastohydrodynamic lubrication(EHL)of a logarithmic profile roller,which is rolling over a flat plane,is given The analysis takes account of sideways flow of lubricant in the inlet region of the contact When the results are presented in suitable non dimensional groups,it is shown that more uniformly pressure and shape of the film distributing in axial direction is taken place under light loading As the increase of the load,the end closure is displayed and the oil pressure rises sharply at the ends The seal action formed by the end closure makes the film thickness a little And the minimum film thickness is transferred from the central to the ends and the value is reduced rapidly As the increase of the speed,the end closure becomes much serious The optimum crowning value obtained in EHL state is larger than the design value obtained in elastostatic contact state for the same working conditions In order to verify the correctness of theory,optical interferometry is applied to measure the oil film thickness between a logarithmic profiled roller and a glass plate under pure rolling conditions It is found the agreement between numerical solutions and experiments is very good.

Acceptance of Chemo-prophylaxis for Latent Tuberculosis Infection among High School/College Student Contacts of Tuberculosis Patients in Shanghai, China

Student contacts of tuberculosis（TB）cases are susceptible to latent tuberculosis infection（LTBI）,and chemo-prophylaxis can reduce the risk of active TB among them.This study aimed to assess the acceptance of chemo-prophylaxis for LTBI among students, and their concerns regarding TB and its preventive treatment.

Two Dimensional Nanoscale Reciprocating Sliding Contacts of Textured Surfaces

Detailed behaviors of nanoscale textured surfaces during the reciprocating sliding contacts are still unknown although they are widely used in mechanical components to improve tribological characteristics. The current research of sliding contacts of textured surfaces mainly focuses on the experimental studies, while the cost is too high. Molecular dynamics（MD） simulation is widely used in the studies of nanoscale single-pass sliding contacts, but the CPU cost of MD simulation is also too high to simulate the reciprocating sliding contacts. In this paper, employing multiscale method which couples molecular dynamics simulation and finite element method, two dimensional nanoscale reciprocating sliding contacts of textured surfaces are investigated. Four textured surfaces with different texture shapes are designed, and a rigid cylindrical tip is used to slide on these textured surfaces. For different textured surfaces, average potential energies and average friction forces of the corresponding sliding processes are analyzed. The analyzing results show that ＂running-in＂ stages are different for each texture, and steady friction processes are discovered for textured surfaces II, III and IV. Texture shape and sliding direction play important roles in reciprocating sliding contacts, which influence average friction forces greatly. This research can help to design textured surfaces to improve tribological behaviors in nanoscale reciprocating sliding contacts.

Formation of a 40 A DC Current Arc During the Opening of Silver Contacts

The erosion of silver contacts due to break arcs with length proportional to time and of variable duration has been measured by weighing the contacts following 5000 openings at a constant current equal to 40 A.The experimental results show that,for arc durations shorter than 60 μs,the transfer of metal from the anode to the cathode occurs,but after passing this stage,when the two electrodes are separated by greater distances,each will display erosion.This is the result of the diffusion of material outside the space between the two electrodes.In order to interpret these results,we have applied a classical model of the physical phenomena occurring at the root of the arc.Analysis of the experimental results shows that for an arc duration of less than15 μs,no distinct cathode root is seen to exist,but beyond this,several spots appear gradually on the cathode for arc duration up to 50 μs,after which they merge into a single spot.The comparison between experiment results and theoretical interpretation is reasonable up to 60 μs.

Serological Study of An Imported Case of Middle East Respiratory Syndrome and His Close Contacts in China, 2015

The first imported Middle East respiratory syndrome （MERS） case in China was identified in May 2015. We determined the kinetics of antibody （IgG and IgM） and neutralizing antibodies against MERS-coronavirus （MERS-CoV） in this case before discharge. Moreover, no seroconversion was found among 53 close contacts by anti-MERS IgG antibody enzyme-linked immunosorbent assay （ELISA） of paired serum samples. These findings suggest that neither community nor nosocomial transmission of MERS-CoV occurred in China.

Hospital contacts with alcohol problems prior to liver cirrhosis or pancreatitis diagnosis

AIM To evaluate prior hospital contacts with alcohol problems in patients with alcoholic liver cirrhosis and pancreatitis. METHODS This was a register-based study of all patients diagnosed with alcoholic liver cirrhosis or pancreatitis during 2008-2012 in Denmark. Hospital contacts with alcohol problems(intoxication, harmful use, or dependence) in the 10-year period preceding the diagnosis of alcoholic liver cirrhosis and pancreatitis were identified.RESULTS In the 10 years prior to diagnosis, 40% of the 7719 alcoholic liver cirrhosis patients and 40% of the 1811 alcoholic pancreatitis patients had at least one prior hospital contact with alcohol problems. Every sixth patient(15%-16%) had more than five contacts. A similar pattern of prior hospital contacts was observed for alcoholic liver cirrhosis and pancreatitis. Around 30% were diagnosed with alcohol dependence and 10% with less severe alcohol diagnoses. For the majority, admission to somatic wards was the most common type of hospital care with alcohol problems. Most had their first contact with alcohol problems more than five years prior to diagnosis.CONCLUSION There may be opportunities to reach some of the patients who later develop alcoholic liver cirrhosis or pancreatitis with preventive interventions in the hospital setting.

Prevalence of Latent Tuberculosis Infection (LTBI) among House Hold Contacts of Sudanese Patients with Pulmonary Tuberculosis in Eastern Sudan: Revisiting the Tuberculin Skin Test

A third of the world’s population is latently infected with TB with an increased risk of developing active TB. Household contacts (HHCs) of pulmonary TB cases are at a greater risk of developing disease. Early identification and treatment of latent TB infected individuals may reduce progression to active TB. This study aimed to determine latent TB infections (LTBI) point prevalence among HHCs and community contacts (CCs) using Tuberculin Skin Test (TST) and whole blood IFN-γ release assay in an area of high TB prevalence. In a prospective, longitudinal and community-based study and following informed consent, 768 volunteers (HHCs n = 245;CCs n = 523) were enrolled. Tuberculin Skin Test (TST), whole blood stimulation with PPD and IFN-γ levels determination using ELISA were performed. Mean ages of HHCs and the CCs were not significantly different (HHCs 35.6 ± 15.7 and CCs 30.6 ± 11.7 years;p = 0.99), with a Male:Female ratio of 1:2. Mean recruitment TST indurations were 4.6 ± 5.5 mm and 2.8 ± 3 mm for HHCs and CCs respectively (p = 0.000). Follow-up (Day 614) mean TST indurations increased significantly to 9.1 ± 7.2 mm and 4.4 ± 3.2 mm for HHCs and CCs respectively (p = 0.001). Using TST indurations ≥ 10 mm, LTBI point prevalence for HHCs and CCs was significantly different (HHCs 461/1000 and 367/1000 individuals, p = 0.03). The mean IFN-γ levels for HHCs and CCs at recruitment day (Day 0) were 0.66 ± 0.17 IU/ml and 0.06 ± 0.04 respectively. The mean of IFN-γ production levels dropped significantly at Day 614 for HHCs and CCs to 0.66 ± 0.15 IU/ml and 0.02 ± 0.02 respectively (p = 0.03) (p = 0.00001). Recruitment LTBI point prevalence using IFN-γ level ≥ 0.35 IU/ml for HHCs and CCs was 440/1000 and 203/1000 respectively (p = 0.000000001). No correlations between TST indurations and IFN-γ levels were detected among HHCs or CCs (p > 0.05). TST is a simple, efficient and cheap technique for LTBI diagnosis and triaging individuals for treatment.