Long-term hydrochemical monitoring and geothermometry:understanding groundwater salinization and thermal fluid contamination in Mila’s basin,Northeastern Algeria

The regular hydrochemical monitoring of groundwater in the Mila basin over an extended period has provided valuable insights into the origin of dissolved salts and the hydrogeochemical processes controlling water salinization.The data reveals that the shallow Karst aquifer shows an increase in TDS of 162 mg L^(-1) while the ther-mal carbonate aquifer that is also used for drinking water supply exhibits an increase of 178 mg L^(-1).Additionally,significant temperature variations are recorded at the sur-face in the shallow aquifers and the waters are carbo-gaseous.Analysis of dissolved major and minor elements has identified several processes influencing the chemical composition namely:dissolution of evaporitic minerals,reduction of sulphates,congruent and incongruent car-bonates’dissolution,dedolomitization and silicates’weathering.The hydrogeochemical and geothermometric results show a mixing of saline thermal water with recharge water of meteoric origin.Two main geothermalfields have been identified,a partially evolved water reservoir and a water reservoir whosefluid interacts with sulphuric acid(H_(2)S)of magmatic origin.These hot waters that are char-acterized by a strong hydrothermal alteration do ascend through faults and fractures and contribute to the contamination of shallower aquifers.Understanding the geothermometry and the hydrogeochemistry of waters is crucial for managing and protecting the quality of groundwater resources in the Mila basin,in order to ensure sustainable water supply for the region.A conceptual model for groundwater circulation and mineralization acquisition has been established to further enhance under-standing in this regard.

Exploring the mechanical behavior and microstructure of compacted loess subjected to dry-wet cycles and chemical contamination

Due to climatic factors and rapid urbanization,the soil in the Loess Plateau,China,experiences the coupled effects of dry-wet cycles and chemical contamination.Understanding the mechanical behavior and corresponding microstructural evolution of contaminated loess subjected to dry-wet cycles is essential to elucidate the soil degradation mechanism.Therefore,direct shear and consolidation tests were performed to investigate the variations in mechanical properties of compacted loess contaminated with acetic acid,sodium hydroxide,and sodium sulfate during dry-wet cycles.The mechanical response mechanisms were investigated using zeta potential,mineral chemical composition,and scanning electron microscopy(SEM)tests.The results indicate that the mechanical deterioration of sodium hydroxidecontaminated loess during dry-wet cycles decreases with increasing contaminant concentration,which is mainly attributed to the thickening of the electrical double layer(EDL)by Nat and the precipitation of calcite,as well as the formation of colloidal flocs induced by OH,thus inhibiting the development of large pores during the dry-wet process.In contrast,the attenuation of mechanical properties of both acetic acid-and sodium sulfate-contaminated loess becomes more severe with increasing contaminant concentration,with the latter being more particularly significant.This is primarily due to the reduction of the EDL thickness and the erosion of cement in the acidic environment,which facilitates the connectivity of pores during dry-wet cycles.Furthermore,the salt expansion generated by the drying process of saline loess further intensifies the structural disturbance.Consequently,the mechanical performance of compacted loess is sensitive to both pollutant type and concentration,exhibiting different response patterns in the dry-wet cycling condition.

Quantification of the adulteration concentration of palm kernel oil in virgin coconut oil using near-infrared hyperspectral imaging

The adulteration concentration of palm kernel oil(PKO)in virgin coconut oil(VCO)was quantified using near-infrared(NIR)hyperspectral imaging.Nowadays,some VCO is adulterated with lower-priced PKO to reduce production costs,which diminishes the quality of the VCO.This study used NIR hyperspectral imaging in the wavelength region 900-1,650 nm to create a quantitative model for the detection of PKO contaminants(0-100%)in VCO and to develop predictive mapping.The prediction equation for the adulteration of VCO with PKO was constructed using the partial least squares regression method.The best predictive model was pre-processed using the standard normal variate method,and the coefficient of determination of prediction was 0.991,the root mean square error of prediction was 2.93%,and the residual prediction deviation was 10.37.The results showed that this model could be applied for quantifying the adulteration concentration of PKO in VCO.The prediction adulteration concentration mapping of VCO with PKO was created from a calibration model that showed the color level according to the adulteration concentration in the range of 0-100%.NIR hyperspectral imaging could be clearly used to quantify the adulteration of VCO with a color level map that provides a quick,accurate,and non-destructive detection method.

Ordered mesoporous materials for water pollution treatment:Adsorption and catalysis

To meet the growing emission of water contaminants,the development of new materials that enhance the efficiency of the water treatment system is urgent.Ordered mesoporous materials provide opportunities in environmental processing applications due to their exceptionally high surface areas,large pore sizes,and enough pore volumes.These properties might enhance the performance of materials concerning adsorption/catalysis capability,durability,and stability.In this review,we enumerate the ordered mesoporous materials as adsorbents/catalysts and their modifications in water pollution treatment from the past decade,including heavy metals(Hg^(2+),Pb^(2+),Cd^(2+),Cr^(6+),etc.),toxic anions(nitrate,phosphate,fluoride,etc.),and organic contaminants(organic dyes,antibiotics,etc.).These contributions demonstrate a deep understanding of the synergistic effect between the incorporated framework and homogeneous active centers.Besides,the challenges and perspectives of the future developments of ordered mesoporous materials in wastewater treatment are proposed.This work provides a theoretical basis and complete summary for the application of ordered mesoporous materials in the removal of contaminants from aqueous solutions.

Recent advances in solving Li_(2)CO_(3) problems in garnet-based solid-state battery: A systematic review(2020-2023)

Garnet solid electrolytes are one of the most promising electrolytes for solid-state batteries.However,Li_(2)CO_(3) is a critical issue that hinders the practical application of garnet-based solid-state lithium-ion batteries.There are two sources of Li_(2)CO_(3) contamination.The main one is the aging of garnet electrolytes in the atmosphere.Garnet electrolytes can react with H_(2)O and CO_(2) in the air to form Li_(2)CO_(3),which reduces ion conductivity,increases electrode/garnet electrolyte interface resistance,and deteriorates the electrochemical performance of the battery.Various strategies,such as elemental doping,grain boundary manipulation,and interface engineering,have been suggested to address these issues.The other is the passivation layer(Li_(2)CO_(3),Li_3N,LiOH,Li_(2)O) formed on the surface of the lithium foil after long-term storage,which is ignored by most researchers.To better understand the current strategies and future trends to address the Li_(2)CO_(3) problem,this perspective provides a systematic review of journals published in this field from 2020-2023.

Machine learning prediction of methane,ethane,and propane solubility in pure water and electrolyte solutions:Implications for stray gas migration modeling

Hydraulic fracturing is an effective technology for hydrocarbon extraction from unconventional shale and tight gas reservoirs.A potential risk of hydraulic fracturing is the upward migration of stray gas from the deep subsurface to shallow aquifers.The stray gas can dissolve in groundwater leading to chemical and biological reactions,which could negatively affect groundwater quality and contribute to atmospheric emissions.The knowledge oflight hydrocarbon solubility in the aqueous environment is essential for the numerical modelling offlow and transport in the subsurface.Herein,we compiled a database containing 2129experimental data of methane,ethane,and propane solubility in pure water and various electrolyte solutions over wide ranges of operating temperature and pressure.Two machine learning algorithms,namely regression tree(RT)and boosted regression tree(BRT)tuned with a Bayesian optimization algorithm(BO)were employed to determine the solubility of gases.The predictions were compared with the experimental data as well as four well-established thermodynamic models.Our analysis shows that the BRT-BO is sufficiently accurate,and the predicted values agree well with those obtained from the thermodynamic models.The coefficient of determination(R2)between experimental and predicted values is 0.99 and the mean squared error(MSE)is 9.97×10^(-8).The leverage statistical approach further confirmed the validity of the model developed.

Disinfection Byproducts and Their Precursors in Drinking Water Sources:Origins,Influencing Factors,and Environmental Insights

Tracing the contamination origins in water sources and identifying the impacts of natural and human processes are essential for ecological safety and public health.However,current analysis approaches are not ideal,as they tend to be laborious,time-consuming,or technically difficult.Disinfection byproducts(DBPs)are a family of well-known secondary pollutants formed by the reactions of chemical disinfectants with DBP precursors during water disinfection treatment.Since DBP precursors have various origins(e.g.,natural,domestic,industrial,and agricultural sources),and since the formation of DBPs from different precursors in the presence of specific disinfectants is distinctive,we argue that DBPs and DBP precursors can serve as alternative indicators to assess the contamination in water sources and identify pollution origins.After providing a retrospective of the origins of DBPs and DBP precursors,as well as the specific formation patterns of DBPs from different precursors,this article presents an overview of the impacts of various natural and anthropogenic factors on DBPs and DBP precursors in drinking water sources.In practice,the DBPs(i.e.,their concentration and speciation)originally present in source water and the DBP precursors determined using DBP formation potential tests—in which water samples are dosed with a stoichiometric excess of specific disinfectants in order to maximize DBP formation under certain reaction conditions—can be considered as alternative metrics.When jointly used with other water quality parameters(e.g.,dissolved organic carbon,dissolved organic nitrogen,fluorescence,and molecular weight distribution)and specific contaminants of emerging concern(e.g.,certain pharmaceuticals and personal care products),DBPs and DBP precursors in drinking water sources can provide a more comprehensive picture of water pollution for better managing water resources and ensuring human health.

Investigation of an electrode-driven hydrogen plasma method for in situ cleaning of tin-based contamination

To prolong the service life of optics,the feasibility of in situ cleaning of the multilayer mirror(MLM)of tin and its oxidized contamination was investigated using hydrogen plasma at different power levels.Granular tin-based contamination consisting of micro-and macroparticles was deposited on silicon via physical vapor deposition(PVD).The electrodedriven hydrogen plasma at different power levels was systematically diagnosed using a Langmuir probe and a retarding field ion energy analyzer(RFEA).Moreover,the magnitude of the self-biasing voltage was measured at different power levels,and the peak ion energy was corrected for the difference between the RFEA measurements and the self-biasing voltage(E_(RFEA)-eV_(self)).XPS analysis of O 1s and Sn 3d peaks demonstrated the chemical reduction process after 1 W cleaning.Analysis of surface and cross-section morphology revealed that holes emerged on the upper part of the macroparticles while its bottom remained smooth.Hills and folds appeared on the upper part of the microparticles,confirming the top-down cleaning mode with hydrogen plasma.This study provides an in situ electrode-driven hydrogen plasma etching process for tin-based contamination and will provide meaningful guidance for understanding the chemical mechanism of reduction and etching.

The Turbulent Schmidt Number for Transient Contaminant Dispersion in a Large Ventilated Room Using a Realizable k-εModel

Buildings with large open spaces in which chemicals are handled are often exposed to the risk of explosions.Computational fluid dynamics is a useful and convenient way to investigate contaminant dispersion in such large spaces.The turbulent Schmidt number(Sc_(t))concept has typically been used in this regard,and most studies have adopted a default value.We studied the concentration distribution for sulfur hexafluoride(SF_(6))assuming different emission rates and considering the effect of Sc_(t).Then we examined the same problem for a light gas by assuming hydrogen gas(H_(2))as the contaminant.When SF_(6) was considered as the contaminant gas,a variation in the emission rate completely changed the concentration distribution.When the emission rate was low,the gravitational effect did not take place.For both low and high emission rates,an increase in S_(ct) accelerated the transport rate of SF_(6).In contrast,for H_(2) as the contaminant gas,a larger S_(ct) could induce a decrease in the H_(2) transport rate.

Reduced magma generation and its implications for the Pulang giant porphyry Cu-polymetallic deposit in Northwest Yunnan,China

The Pulang giant porphyry Cu-Mo polymetallic deposit is located in the Zhongdian area in the center of the Sanjiang Tethys tectonic domain,which was formed by the westward subduction of the Garze-Litang oceanic slab beneath the Zhongza massif.Chalcopyrite-pyrrhotite-pyritemolybdenite occurs as disseminations,veins,veinlets,and stockworks distributed in the K-silicate alteration zone in the monzonite porphyry,which is superimposed by propylitization.The chemical compositions of biotite and amphibole analyzed by electron probe microanalysis(EPMA)indicate that the ore-forming magma and exsolved fluids experienced a continuous decrease in the oxygen fugacity(fO_(2)).Primary amphibolite and biotite(type I)crystallized at relatively high temperatures(744-827°C)and low fO_(2)(log fO_(2)=−12.26 to−11.91)during the magmatic stage.Hydrothermal fluids exsolved from the magma have a relatively lower temperature(621-711°C)and fO_(2)(log fO_(2)=−14.36 to−13.32)than the original magma.In addition,the presence of a high abundance of pyrrhotite and an insufficiency of primary magnetite and sulfate in the ore(i.e.,anhydrite and gypsum)indicate that the deposit may be a reduced porphyry deposit.Magma and fluid fO_(2)results,combined with previous research on magmatic fO_(2)at the Pulang deposit,indicate that the magma associated with the reduced Pulang ore assemblages was initially generated as a highly oxidized magma that was subsequently reduced by sedimentary rocks of the Tumugou Formation.

Oxidation of emerging organic contaminants by in-situ H_(2)O_(2) fenton system

The existence and risk of emerging organic contaminants(EOCs)have been under consideration and paid much effort to degrade these pollutants.Fenton system is one of the most widely used technologies to solve this problem.The original Fenton system relies on the hydroxyl radicals produced by Fe(Ⅱ)/H_(2)O_(2) to oxidize the organic contaminants.However,the application of the Fenton system is limited by its low iron cycling efficiency and the high risks of hydrogen peroxide transportation and storage.The introduction of external energy(including light and electricity etc.)can effectively promote the Fe(Ⅲ)/Fe(Ⅱ)cycle and the reduction of oxygen to produce hydrogen peroxide in situ.This review introduces three in-situ Fenton systems,which are electro-Fenton,Photo-Fenton,and chemical reaction.The mechanism,influencing factors,and catalysts of these three in-situ Fenton systems in degrading EOCs are discussed systematically.This review strengthens the understanding of Fenton and in-situ Fenton systems in degradation,offering further insight into the real application of the in-situ Fenton system in the removal of EOCs.

Efficacy of graphene nanocomposites for air disinfection in dental clinics: A randomized controlled study

BACKGROUND Aerosols containing disease-causing microorganisms are produced during oral diagnosis and treatment can cause secondary contamination.AIM To investigate the use of graphene material for air disinfection in dental clinics by leveraging its adsorption and antibacterial properties.METHODS Patients who received ultrasonic cleaning at our hospital from April 2023 to April 2024.They were randomly assigned to three groups(n=20 each):Graphene nanocomposite material suction group(Group A),ordinary filter suction group(Group B),and no air suction device group(Group C).The air quality and air colony count in the clinic rooms were assessed before,during,and after the procedure.Additionally,bacterial colony counts were obtained from the air outlets of the suction devices and the filter screens in Groups A and B.RESULTS Before ultrasonic cleaning,no significant differences in air quality PM2.5 and colony counts were observed among the three groups.However,significant differences in air quality PM2.5 and colony counts were noted among the three groups during ultrasonic cleaning and after ultrasonic treatment.Additionally,the number of colonies on the exhaust port of the suction device and the surface of the filter were significantly lower in Group A than in Group B(P=0.000 and P=0.000,respectively).CONCLUSION Graphene nanocomposites can effectively sterilize the air in dental clinics by exerting their antimicrobial effects and may be used to reduce secondary pollution.

Effect of dates on blood glucose and lipid profile among patients with type 2 diabetes

Poor fruit and vegetable consumption is one of the 10 major risk factors for mortality.There is a misconception regarding the consumption of dates among patients with diabetes.This manuscript assessed the effects of date consumption on fasting and postprandial blood glucose,glycated hemoglobin,total cholesterol,triglycerides,low-density lipoproteins,high-density lipoproteins,and microbial markers.Four literature databases were searched for relevant articles.Of the 595 studies retrieved,24 assessed the effects of dates on glycemic control and lipids.Overall,the evidence suggests that dates have a lowering effect on blood glucose.Dates reduce total cholesterol and triglyceride levels and increase high-density lipoprotein levels.Dates also promote the abundance of beneficial gut microbiota.Therefore,patients with diabetes and dyslipidemia can consume dates to reduce their blood glucose,cholesterol,and triglycerides.

Assessment of Retention Ponds and Its Impacts on Health of Residents in Mogadishu, Somalia: Mixed Methods

The purpose of this study was to evaluate the effects of retention ponds on the environment and population health by analyzing water samples from various ponds in Mogadishu, to determine the prevalence of waterborne illnesses that occur during the rainy season in Mogadishu, and to find out what experts thought about the effects of retention ponds on the environment as well as population health in Mogadishu. Methods: Mixed designs were used in the study. The first design is an exploratory study where samples are taken from different retention ponds in Mogadishu. The second design involves gathering secondary data from the online FSNAU Dashboard regarding the incidence of rainfall and waterborne illnesses including malaria and cholera. Additionally, a cross-sectional survey of expert opinions using questionnaires was the third design. The 10 water samples were taken from retention ponds in Mogadishu as part of the sample size. Data on the fourth month was also gathered using the FNSAU dashboard, and seventy sample sizes were used for the expert self-administered questionnaire for the third design. Excel was used for data analysis in the initial design. While BMI SPSS versions 22 were used to analyze the data from the Self-administered Questionnaire, additional methods were utilized to compute descriptive statistics, such as mean and standard deviation, and to analyze demographic data in a frequency table. Findings: The results show that three samples had unsatisfactory scores (Grade D): Yaqshid (Warshadda Bastada) had a WQI of 80.85, Boondheer (Bondher Pond) had a WQI of 80.64, and Wartanabad (Xamar Jadiid Pond) had a WQI of 80.89. The remaining samples were all rated as fair (grade), which indicates that they ranged from 50 to 75. The months with the largest rainfall already occurred in December, November, and October, when the prevalence of diseases during the rainy season was highest for cholera cases. Although October and December saw a significant number of malaria cases, November did not. Retention ponds’ overall effects on residential environments were evaluated, and the results showed that the standard deviation was 0.802 and the cumulative average mean scores were 4.41 overall. This indicates that the respondents were in agreement that retention ponds in Mogadishu, Somalia, had an effect on residential areas. Recommendation: The study suggested that in order to identify retention pond contamination and create treatment units for its management, the Ministry of Health forms a district-level public health committee. All districts must have a sewer system installed by the local government, and retention ponds must be made easier in order to move waste outside of the city.

Evaluating bacterial contamination and surgical site infection risks in intracorporeal anastomosis: Role of bowel preparation

We recently read the study by Kayano et al on intracorporeal anastomosis(IA)for colon cancer,which assessed bacterial contamination and medium-term onco-logical outcomes and affirmed that IA is analogous to extracorporeal anastomosis in reducing intraperitoneal bacterial risk and achieving similar oncological results.Our commentary addresses gaps,particularly concerning bowel preparation and surgical site infections(SSIs),and highlights the need for comprehensive details on the bowel preparation methods that are currently employed,including mecha-nical bowel preparation,oral antibiotics(OA),their combination,and specific OA types.We emphasize the necessity for further analyses that investigate these me-thods and their correlation with SSI rates,to enhance clinical protocol guidance and optimize surgical outcomes.Such meticulous analyses are essential for refi-ning strategies to effectively mitigate SSI risk in colorectal surgeries.

Factors Contributing to Contamination of Street Foods in Bamako, Mali

The World Health Organization states that foodborne diseases are a worldwide public health issue. Although street foods can provide nutritious and affordable ready-to-eat meals for city dwellers, their health risks can outweigh the benefits. A cross-sectional study was conducted in the Bamako district, focusing on street food vendors near schools, universities, extensive markets, administrative centers, and major roads. We aimed to sample fifty (50) sellers per municipality, making 300 sellers for the Bamako district. We developed a survey sheet to collect data, and six teams rotated between the municipalities each month. Before starting the collection, the teams were provided administrative papers approved by the municipal authority. The survey revealed three types of sales sites: fixed (65%), semi-fixed (30%), and mobile (4.40%). The proportion of sellers was 26.8%, 23.2%, 19.7%, and 4.2% in municipalities III, IV, and I. In municipalities I, II, III, IV, and VI, respectively, 92%, 95.70%, 93%, 87.2%, and 100% of the sellers were female. The age distribution of sellers was 65.63%, 46.81%, 40.82%, 38.30%, 36.17%, 36%, and 32% in the 25-34 and 35 - 44 age groups. Illiteracy rates were 59.20%, 61.70%, 55.30%, 75%, and 56% in municipalities I, II, III, IV, and VI, respectively. The study identified two categories of sellers: 48.3% in type 1 and 51.7% in type 2. The first category comprised 154 sellers, and the second 165 sellers. The survey found that 66.00%, 56.00%, 48.90%, 44.90%, 38.30%, and 34.40% of municipal V, VI, III, I, II, and IV sales sites were open-air. In municipality I, 63.30% of the sites were under hangars, while in municipalities II and IV, the corresponding percentages were 51.10% and 59.40%, respectively. Moreover, 46.00%, 31.90%, 31.30%, 30.60%, and 27.70% of the sites in municipalities VI, II, IV, I, and III were located next to gutters. In conclusion, this study identified several factors that could compromise the quality of street foods sold in the six municipalities of Bamako.

Microbial Degradation of Organic Contaminants in Streambed/Floodplain Sediments in Passaic River—New Jersey Area

This paper is intended to explore soil organic matter and carbon isotope fractionation at three locations of the Passaic River to determine if microbial degradation of organic contaminants in soil is correlated to the surrounding physical environment. Microbial degradation of organic contaminants is important for the detoxification of toxic substances thereby minimizing stagnation in the environment and accumulating in the food chain. Since organic contaminants are not easily dissolved in water, they will penetrate sediment and end up enriching the adjacent soil. The hypothesis that we are testing is microbial activity and carbon isotope fractionation will be greater in preserved soils than urban soils. The reason why this is expected to be the case is the expectation of higher microbial activity in preserved environments due to less exposure to pollutants, better soil structure, higher organic matter content, and more favorable conditions for microbial growth. This is contrasted with urban soils, which are impacted by pollutants and disturbances, potentially inhibiting microbial activity. We wish to collect soil samples adjacent to the Passaic River at a pristine location, Great Swamp Wildlife Refuge, a suburban location, Goffle Brook Park, Hawthorne NJ, and an urban location, Paterson NJ. These soil samples will be weighed for soil organic matter (SOM) and weighed for isotope ratio mass spectrometry (IRMS) to test organic carbon isotopes. High SOM and δ13C depletion activity indicate microbial growth based on the characteristics of the soil horizon rather than the location of the soil sample which results in degradation of organic compounds.

Microbial Quality Assessment of Locally Produced Millet Drink “Lamugin” and Hibiscus sabdariffa Calyxes Extract Beverage “Sobolo” in Accra, Ghana

Local Ghanaian beverages such as Sobolo and Lamugin, play a significant cultural, economic, and medicinal role in the daily lives of the population. These traditional drinks are produced using locally sourced ingredients, making them both affordable and accessible. The COVID-19 pandemic further heightened the economic importance of these beverages, as demand surged due to their perceived immune-boosting properties. However, the production of these beverages often occurs in non-sterile environments with minimal regulatory oversight, leading to concerns about microbial contamination. This study aimed to evaluate the microbial quality of Sobolo and Lamugin sold at selected street markets in the Greater Accra region of Ghana. Samples were collected from various vendors and analyzed for bacterial and fungal pathogens using standard microbiological techniques. The results revealed significant microbial contamination in many samples, with bacteria such as Escherichia coli, Staphylococcus aureus, and Klebsiella pneumoniae detected at levels exceeding safe limits. These findings raise serious public health concerns, as the consumption of contaminated beverages could lead to gastrointestinal infections and other health issues. This highlights the urgent need for stricter regulations and improved hygiene practices in the production of local beverages to ensure their safety for consumers. Implementing better regulatory frameworks, regular inspections, and public awareness campaigns could help mitigate the risks associated with these popular drinks, ensuring they remain a safe and cherished part of Ghana’s cultural heritage.

Phytoremediation Strategies for Heavy Metal Contamination: A Review on Sustainable Approach for Environmental Restoration

Current globalization trends and important breakthroughs globally need a complete study of heavy metal contamination, its causes, its impacts on human and environmental health, and different remediation strategies. Heavy metal pollution is mostly produced by urbanization and industry, which threatens ecosystems and human health. Herein, we discuss a sustainable environmental restoration strategy employing phytoremediation for heavy metal pollution, the carcinogenic, mutagenic, and cytotoxic effects of heavy metals such as cadmium, copper, mercury, selenium, zinc, arsenic, chromium, lead, nickel, and silver, which may be fatal. Phytoremediation, which was prioritized, uses plants to remove, accumulate, and depollute pollutants. This eco-friendly method may safely collect, accumulate, and detoxify toxins using plants, making it popular. This study covers phytostabilization, phytodegradation, rhizodegradation, phytoextraction, phytovolatilization, and rhizofiltration. A phytoremediation process’s efficiency in varied environmental circumstances depends on these components’ complex interplay. This paper also introduces developing phytoremediation approaches including microbe-assisted, chemical-assisted, and organic or bio-char use. These advancements attempt to overcome conventional phytoremediation’s limitations, such as limited suitable plant species, location problems, and sluggish remediation. Current research includes machine learning techniques and computer modeling, biostimulation, genetic engineering, bioaugmentation, and hybrid remediation. These front-line solutions show that phytoremediation research is developing towards transdisciplinary efficiency enhancement. We acknowledge phytoremediation’s promise but also its drawbacks, such as site-specific variables, biomass buildup, and sluggish remediation, as well as ongoing research to address them. In conclusion, heavy metal pollution threatens the ecology and public health and must be reduced. Phytoremediation treats heavy metal pollution in different ways. Over time, phytoremediation systems have developed unique ways that improve efficiency. Despite difficulties like site-specificity, sluggish remediation, and biomass buildup potential, phytoremediation is still a vital tool for environmental sustainability.

Effects of Effluent from a Dumpsite on the Physicochemical Properties of River Achichum in Bamendakwe, Northwest Cameroon

This study was aimed to assess the effects of effluent from a dumpsite on the physicochemical properties of river Achichum in Bamendakwe in the Bamenda I municipality, Northwest Region of Cameroon. The quality of water used for domestic purposes by the population of this area is mostly appreciated through its organoleptic assessment while no attention is paid to the physicochemical and microbiological properties. Samples (upstream, effluent, and downstream) were collected in the months of September 2022 and February 2023 and examined for organoleptic, physicochemical and bacteriological characteristics using standard methods. The river was contaminated to different extents by nitrates (28.56 - 149.91 mg/L), sulphates (246.89 - 725.42 mg/L) and heavy metals (0.01 - 0.04 mg/L for lead and 0.98 - 2.15 mg/L for aluminum). This contamination could be due to an inflow of the untreated effluent into the river. The river contained a high pollution level of lead and aluminum. Bacteriological investigations revealed that all the analyzed samples from the river contained indicators of faecal pollution such as Enterobacteria spp., E. coli, Streptococcus spp., Salmonella spp., Shigella spp., Staphylococcus spp. and Vibrio spp. Consequently, its utilization exposes consumers to health risks. Thus, water from the river should be treated prior to consumption.