Surface Sediment Density and Moisture Content in North slope of South China Sea

Marine engineering geology is mainly based on the actual project to study the seabed.This provides a variety of engineering geological parameters for the development of marine engineering(Zhu et al.,2016).This is an early

Basic density, extractive content and moisture sorption properties of Pinus pinaster wood infected with the pinewood nematode, Bursaphelenchus xylophilus

The pinewood nematode（PWN）, Bursaphelenchus xylophilus, has become one of the most severe threats to pine forest worldwide. Nematodes, migrating through resin canals and feeding on the living cells, induce rapid metabolic changes in ray parenchyma cells, create cavitation areas, decrease xylem water content and oleoresin exudation, and cause necrosis of parenchyma and cambial cells. This study focused on the impact of PWN infection on technological parameters of wood and evaluated the impact of anatomic and biochemical incidences of tree defense reactions on basic density, extractive content and moisture sorption properties of Pinus pinaster wood.Samples of infected and uninfected wood were studied.The presence of nematodes reduced wood basic density by2 % and decreased the total content of extractives in infected wood as compared with uninfected（5.98 and8.90 % of dry wood mass, respectively）. Extractives in infected trees had inverse distribution along the trunk as compared with uninfected trees. The adsorption isotherms for infected and uninfected wood had similar positioning.We recorded differences（some statistically significant） in the equilibrium moisture content of infected and uninfected wood under varying environmental conditions. Despite the verified differences in wood basic density, extractive content and moisture sorption properties, the overall conclusion is that the PWN had a slight impact on these characteristics of wood.

Root length density distribution and associated soil water dynamics for tomato plants under furrow irrigation in a solar greenhouse

Furrow irrigation is a traditional widely-used irrigation method in the world. Understanding the dynamics of soil water distribution is essential to developing effective furrow irrigation strategies, especially in water-limited regions. The objectives of this study are to analyze root length density distribution and to explore soil water dynamics by simulating soil water content using a HYDRUS-2D model with consideration of root water uptake for furrow irrigated tomato plants in a solar greenhouse in Northwest China. Soil water contents were also in-situ observed by the ECH_2O sensors from 4 June to 19 June and from 21 June to 4 July, 2012. Results showed that the root length density of tomato plants was concentrated in the 0–50 cm soil layers, and radiated 0–18 cm toward the furrow and 0–30 cm along the bed axis. Soil water content values simulated by the HYDRUS-2D model agreed well with those observed by the ECH_2O sensors, with regression coefficient of 0.988, coefficient of determination of 0.89, and index of agreement of 0.97. The HYDRUS-2D model with the calibrated parameters was then applied to explore the optimal irrigation scheduling. Infrequent irrigation with a large amount of water for each irrigation event could result in 10%–18% of the irrigation water losses. Thus we recommend high irrigation frequency with a low amount of water for each irrigation event in greenhouses for arid region. The maximum high irrigation amount and the suitable irrigation interval required to avoid plant water stress and drainage water were 34 mm and 6 days, respectively, for given daily average transpiration rate of 4.0 mm/d. To sum up, the HYDRUS-2D model with consideration of root water uptake can be used to improve irrigation scheduling for furrow irrigated tomato plants in greenhouses in arid regions.

Effect of discrete fibre reinforcement on soil tensile strength

The tensile behaviour of soil plays a significantly important role in various engineering applications. Compacted soils used in geotechnical constructions such as dams and clayey liners in waste containment facilities can suffer from cracking due to tensile failure. In order to increase soil tensile strength, discrete fibre reinforcement technique was proposed. An innovative tensile apparatus was developed to deter- mine the tensile strength characteristics of fibre reinforced soil. The effects of fibre content, dry density and water content on the tensile strength were studied. The results indicate that the developed test apparatus was applicable in determining tensile strength of soils. Fibre inclusion can significantly in- crease soil tensile strength and soil tensile failure ductility. The tensile strength basically increases with increasing fibre content. As the fibre content increases from 0% to 0.2%, the tensile strength increases by 65.7%. The tensile strength of fibre reinforced soil increases with increasing dry density and decreases with decreasing water content. For instance, the tensile strength at a dry density of 1.7 Mg/m^3 is 2.8 times higher than that at 1.4 Mg/m^3. It decreases by 30% as the water content increases from 14.5% to 20.5%. Furthermore, it is observed that the tensile strength of fibre reinforced soil is dominated by fibre pull-out resistance, depending on the interracial mechanical interaction between fibre surface and soil matrix.

A brief introduction to recent applications of several sediment-analysis techniques in palaeolimnological studies-dry bulk density and water content, mineral magnetism, carbonate content, and content of total organic carbon,nitrogen content and carbon/nitrogen ratio

Determination of dry bulk density and water content measurement of magnetic susceptibility (x) and saturation isothermal remanent magnetization (SIRM), determination of carbonate content, and determination of total organic carbon (TOC) content nitrogen content (N%) and carbon/nitrogen (C/N) ratio are some of the techniques which have been widely applied to lacustrine-sediment analyses. The techniques,complemented by others, are usually useful for revealing characteristics of lacustrine-sediments and thus for postulating hydrological regimes in the lake and environmental conditions and human activity around it in palaeolimnological studies. A very brief review is presented on recent applications of these techniques in palaeolimnological work with English literatures published mainly since 1985 and focus given on interpretations of results of these analyses related to palaeoenvironmental reconstructions. Low dry bulk density and high water content often imply relatively warm and wet conditions. High X and SIRM are usually resulted from reduced dilutions in the lake and intensified erosions on its catchment. both of which can be in turn attributed to environmental changes. While variations in patterns of X and SIRM may give further insight on mineral magnetism and thus implications on environmental conditions. Increased carbonate content seems likely to associate to warm and dry conditions.Increased TOC content is virtually used as one of indicators of warm and wet conditions and variations in C/N ratio may hint variations in relative contributions of different sources, aquatic and terrestrial, to the total organic matter in lake sediments and hence to lake-level fluctuations and climate changes.

CSES GNSS ionospheric inversion technique, validation and error analysis

With the increased number of low Earth orbit(LEO) satellites equipped with global navigation satellite system(GNSS) receiver,the LEO based GNSS slant total electron content(TEC) and electron density profile(EDP) data play an increasingly important role in space weather and ionospheric research due to improved global coverage. China Seismo-Electromagnetic Satellite(CSES), which was launched in February 2018, is equipped with GNSS receiver for either precise orbit determination(POD) and ionospheric inversion. The purpose of the present paper is to validate CSES GNSS ionospheric inversion technique based on the real observations and verify the accuracy of TEC and EDP retrieval based on the simulated data. The following conclusions can be drawn: the epoch difference inversion(EDI) derived from CSES can successfully retrieve the EDPs without non-occultation side measurements; the technique of EDI and the calibrated TEC inversion(CTI) have similar behaviors in inversion errors,however, the retrieved Nm F2 and hm F2 have a larger systematic error surrounding the equatorial ionization anomaly(EIA)where the assumption of spherical symmetry is often invalid; the precision and accuracy of retrieved TEC have been investigated in the paper based on the simulated data, and it is found that the accuracy of the retrieved TEC is relative to solar activity: the lower the F10.7 index, the higher the accuracy of retrieved TEC.