SiC powder was rapidly synthesized in an induction furnace with crystalline silicon cutting waste and active carbon as raw materials,and then SiC porous ceramics were prepared at 1600 t for 4 h with carbon embedded us...SiC powder was rapidly synthesized in an induction furnace with crystalline silicon cutting waste and active carbon as raw materials,and then SiC porous ceramics were prepared at 1600 t for 4 h with carbon embedded using the powder as raw material,the starch and the graphite as pore-forming agents.Effects of additions of different pore-forming agents on the phase composition,microstructures,physical properties,and cold crushing strength of the porous ceramics were investigated.The results show that the main crystalline phases of the synthetic powder areα-S iC(6H-SiC)andβ-SiC(3C-SiC).The phase composition of the porous ceramics includesα-S iC(6H-SiC),β-SiC(3C-SiC),FeSi,quartz and Si2N20.The apparent porosity and closed porosity of the porous ceramics prepared by adding starch are higher,and the cold compressive strength of the porous ceramics added with graphite is higher.As increasing the additions of the starch,the apparent porosity,closed porosity and linear shrinkage ratio of the porous ceramics increase,and the bulk density decreases correspondingly.When 20 mass%starch is added,the apparent porosity,closed porosity,linear shrinkage ratio and cold compressive strength are 57.05%,2.03%,5.10%and 10.20 MPa,respectively.展开更多
The preforms with high SiC volume fraction （〉50%） were successfully fabricated by two bonding methods. Moreover, the dimensional change, compressive strength, and microstructure of SiC preforms were investigated, a...The preforms with high SiC volume fraction （〉50%） were successfully fabricated by two bonding methods. Moreover, the dimensional change, compressive strength, and microstructure of SiC preforms were investigated, and the bonding mechanism among SiC particulates in preforms was also discussed. Results show that, after heating to 1 100 ~C and holding for 2 h, a uniform and interconnected structure in the SiC preforms can be obtained by using starch, stearic acid, and graphite respectively as the pore-forming agents, which benefits the subsequent infiltration by the molten metals. More neck-like-jointing among SiC particulate by using graphite as the pore-forming agent improves the dimensional accuracy and compressive strength of the preform. Besides, the properties of the preforms by the binder bonding are better than those by the oxidation bonding, which is mainly because the mixed neck-like-jointing and binder at high temperature provide effective bonding together.展开更多
The high water content of corn grain at harvest is a challenge in Northeast China,where the growing season is short.Using a dehydrating agent before harvest can help corn seeds dehydrate quickly.The dry matter accumul...The high water content of corn grain at harvest is a challenge in Northeast China,where the growing season is short.Using a dehydrating agent before harvest can help corn seeds dehydrate quickly.The dry matter accumulation and nutrient quality of maize were systematically studied by field experiments and instrumental analysis using maize varieties of different maturities as test materials.The results showed that the accumulation of dry matter was enhanced by an increased dosage of a dehydrating agent.When the dehydrating agent dosage reached 1800 mL•hm-2,the dry matter accumulation of early-maturing varieties increased by 24.1 g,and the water content decreased by 8.08%.Different maize varieties were treated with the same dose;early-maturing varieties showed significant effects on grain dry matter accumulation,and kernel dry matter accumulation increased by 7%.The effects of different doses on grain dehydration were obvious,and the effects on different maize varieties varied.Medium-ripening maize varieties showed the most significant effect,with a 19.5%reduction in water content.The effects of dehydrating agent doses on maize yield,grain nutrient quality and seed germination rate were not significant.Therefore,a dehydrating agent promoted the accumulation of dry matter in grain and accelerated the rapid dehydration.展开更多
文摘SiC powder was rapidly synthesized in an induction furnace with crystalline silicon cutting waste and active carbon as raw materials,and then SiC porous ceramics were prepared at 1600 t for 4 h with carbon embedded using the powder as raw material,the starch and the graphite as pore-forming agents.Effects of additions of different pore-forming agents on the phase composition,microstructures,physical properties,and cold crushing strength of the porous ceramics were investigated.The results show that the main crystalline phases of the synthetic powder areα-S iC(6H-SiC)andβ-SiC(3C-SiC).The phase composition of the porous ceramics includesα-S iC(6H-SiC),β-SiC(3C-SiC),FeSi,quartz and Si2N20.The apparent porosity and closed porosity of the porous ceramics prepared by adding starch are higher,and the cold compressive strength of the porous ceramics added with graphite is higher.As increasing the additions of the starch,the apparent porosity,closed porosity and linear shrinkage ratio of the porous ceramics increase,and the bulk density decreases correspondingly.When 20 mass%starch is added,the apparent porosity,closed porosity,linear shrinkage ratio and cold compressive strength are 57.05%,2.03%,5.10%and 10.20 MPa,respectively.
基金Funded by the National Natural Science Foundation of China(No.51166011)Aviation Science Foundation(No.2012ZF56024)Key Laboratory for Microstructural Control of Metallic Materials of Jiangxi Province(Nanchang Hangkong University)(No.JW201423003)
文摘The preforms with high SiC volume fraction （〉50%） were successfully fabricated by two bonding methods. Moreover, the dimensional change, compressive strength, and microstructure of SiC preforms were investigated, and the bonding mechanism among SiC particulates in preforms was also discussed. Results show that, after heating to 1 100 ~C and holding for 2 h, a uniform and interconnected structure in the SiC preforms can be obtained by using starch, stearic acid, and graphite respectively as the pore-forming agents, which benefits the subsequent infiltration by the molten metals. More neck-like-jointing among SiC particulate by using graphite as the pore-forming agent improves the dimensional accuracy and compressive strength of the preform. Besides, the properties of the preforms by the binder bonding are better than those by the oxidation bonding, which is mainly because the mixed neck-like-jointing and binder at high temperature provide effective bonding together.
基金Supported by the Research and Development Plan of Applied Technology in Heilongjiang Province(GA19B104)。
文摘The high water content of corn grain at harvest is a challenge in Northeast China,where the growing season is short.Using a dehydrating agent before harvest can help corn seeds dehydrate quickly.The dry matter accumulation and nutrient quality of maize were systematically studied by field experiments and instrumental analysis using maize varieties of different maturities as test materials.The results showed that the accumulation of dry matter was enhanced by an increased dosage of a dehydrating agent.When the dehydrating agent dosage reached 1800 mL•hm-2,the dry matter accumulation of early-maturing varieties increased by 24.1 g,and the water content decreased by 8.08%.Different maize varieties were treated with the same dose;early-maturing varieties showed significant effects on grain dry matter accumulation,and kernel dry matter accumulation increased by 7%.The effects of different doses on grain dehydration were obvious,and the effects on different maize varieties varied.Medium-ripening maize varieties showed the most significant effect,with a 19.5%reduction in water content.The effects of dehydrating agent doses on maize yield,grain nutrient quality and seed germination rate were not significant.Therefore,a dehydrating agent promoted the accumulation of dry matter in grain and accelerated the rapid dehydration.
