Mechanical properties and acoustic emission characteristics of soft rock with different water contents under dynamic disturbance

Uniaxial compression tests and cyclic loading acoustic emission tests were conducted on 20%,40%,60%,80%,dry and saturated muddy sandstone by using a creep impact loading system to investigate the mechanical properties and acoustic emission characteristics of soft rocks with different water contents under dynamic disturbance.The mechanical properties and acoustic emission characteristics of muddy sandstones at different water contents were analysed.Results of experimental studies show that water is a key factor in the mechanical properties of rocks,softening them,increasing their porosity,reducing their brittleness and increasing their plasticity.Under uniaxial compression,the macroscopic damage characteristics of the muddy sandstone change from mono-bevel shear damage and‘X’type conjugate bevel shear damage to a roadway bottom-drum type damage as the water content increases.Dynamic perturbation has a strengthening effect on the mechanical properties of samples with 60%and less water content,and a weakening effect on samples with 80%and more water content,but the weakening effect is not obvious.Macroscopic damage characteristics of dry samples remain unchanged,water samples from shear damage and tensile–shear composite damage gradually transformed into cleavage damage,until saturation transformation monoclinic shear damage.The evolution of acoustic emission energy and event number is mainly divided into four stages:loading stage(Ⅰ),dynamic loading stage(Ⅱ),yield failure stage(Ⅲ),and post-peak stage(Ⅳ),the acoustic emission characteristics of the stages were different for different water contents.The characteristic value of acoustic emission key point frequency gradually decreases,and the damage degree of the specimen increases,corresponding to low water content—high main frequency—low damage and high water content—low main frequency—high damage.

A Calculation Method of Double Strength Reduction for Layered Slope Based on the Reduction of Water Content Intensity

The calculation of the factor of safety(FOS)is an important means of slope evaluation.This paper proposed an improved double strength reductionmethod(DRM)to analyze the safety of layered slopes.The physical properties of different soil layers of the slopes are different,so the single coefficient strength reduction method(SRM)is not enough to reflect the actual critical state of the slopes.Considering that the water content of the soil in the natural state is the main factor for the strength of the soil,the attenuation law of shear strength of clayey soil changing with water content is fitted.This paper also establishes the functional relationship between different reduction coefficients.Then,a USDFLD subroutine is programmed using the secondary development function of finite element software.Controlling the relationship between field variables and calculation time realizes double strength reduction applicable to the layered slope.Finally,by comparing the calculation results of different examples,it is proved that the stress and displacement distribution of the critical slope state obtained by the improved method is more realistic,and the calculated safety factor is more reliable.The newly proposedmethod considers the difference of intensity attenuation between different soil layers under natural conditions and avoids the disadvantage of the strength reduction method with uniform parameters,which provides a new idea and method for stability analysis of layered and complex slopes.

Effects of Ni doping contents on photocatalytic activity of B-BiVO_4 synthesized through sol-gel and impregnation two-step method

To enhance the photocatalytic activity of B-BiVO4,Ni-doped B?BiVO4photocatalyst(Ni-B-BiVO4)was synthesized through sol-gel and impregnation method.The photocatalysts were characterized by XPS,XRD,SEM,EDS,BET and UV-Vis DRS techniques.The results showed that single or double doping did not change the crystalline structure and morphology,but the particle size decreased with Ni doping.The band gap energy absorption edge of Ni-B-BiVO4shifted to a longer wavelength compared with undoped,B or Ni single doped BiVO4.More V4+and surface hydroxyl oxygen were observed in BiVO4after Ni-B co-doping.When the optimal mass fraction of Ni is0.30%,the degradation rate of MO in50min is95%for0.3Ni-B-BiVO4sample which also can effectively degrade methyl blue(MB),acid orange(AOII)II and rhodamine B(RhB).The enhanced photocatalytic activity is attributed to the synergistic effects of B and Ni doping.

Determination of Fe and Zn contents and distributions in natural sphalerite/marmatite by various analysis methods

The contents of Fe and Zn in natural sphalerite samples were determined by chemical titration and spectroscopic techniques(portable X-ray fluorescence(P-XRF) spectrometry, electron probe microanalysis with energy dispersive spectroscopy(EPMA-EDS), electron probe microanalysis with wavelength dispersive spectroscopy(EPMA-WDS), and time-of-flight secondary ion mass spectrometry(To F-SIMS)). Besides, the distribution of Fe and Zn in sphalerite samples was analyzed by imaging EPMA-WDS and imaging To F-SIMS. The results show that Fe and Zn contents determined by each spectroscopic technique have good linearity with those determined by chemical titration(R^2>0.77), and the R^2 values of Fe are generally greater than those of Zn. The imaging analysis results revealed that Fe and Zn are not uniformly distributed in the sphalerite.

Improving the Effectiveness of Image Classification Structural Methods by Compressing the Description According to the Information Content Criterion

The research aims to improve the performance of image recognition methods based on a description in the form of a set of keypoint descriptors.The main focus is on increasing the speed of establishing the relevance of object and etalon descriptions while maintaining the required level of classification efficiency.The class to be recognized is represented by an infinite set of images obtained from the etalon by applying arbitrary geometric transformations.It is proposed to reduce the descriptions for the etalon database by selecting the most significant descriptor components according to the information content criterion.The informativeness of an etalon descriptor is estimated by the difference of the closest distances to its own and other descriptions.The developed method determines the relevance of the full description of the recognized object with the reduced description of the etalons.Several practical models of the classifier with different options for establishing the correspondence between object descriptors and etalons are considered.The results of the experimental modeling of the proposed methods for a database including images of museum jewelry are presented.The test sample is formed as a set of images from the etalon database and out of the database with the application of geometric transformations of scale and rotation in the field of view.The practical problems of determining the threshold for the number of votes,based on which a classification decision is made,have been researched.Modeling has revealed the practical possibility of tenfold reducing descriptions with full preservation of classification accuracy.Reducing the descriptions by twenty times in the experiment leads to slightly decreased accuracy.The speed of the analysis increases in proportion to the degree of reduction.The use of reduction by the informativeness criterion confirmed the possibility of obtaining the most significant subset of features for classification,which guarantees a decent level of accuracy.

Low palladium content CeO_(2)/ZnO composite for acetone sensor with sub-second response prepared by ultrasonic method

In practical applications,noble metal doping is often used to prepare high performance gas sensors,but more noble metal doping will lead to higher preparation costs.In this study,CeO_(2)/ZnO-Pd with low palladium content was prepared by ultrasonic method with fast response and high selectivity for acetone sensing.With the same amount of palladium added,the selectivity coefficient of CeO_(2)/ZnO-Pd is 1.88 times higher than that of the stirred sensor.Compared with the pure PdO-doped CeO_(2)/ZnO-PdO material,the content of Pd in CeO_(2)/ZnO-PdO is about 30%of that in CeO_(2)/ZnO-PdO,but the selectivity coefficient for acetone is 2.56 times higher.The CeO_(2)/ZnO-Pd sensor has a higher response(22.54)to 50×10^(−6) acetone at 300℃and the selectivity coefficient is 2.57 times that of the CeO_(2)/ZnO sensor.The sensor has a sub-second response time(0.6 s)and still has a 2.36 response to 330×10^(−9) of acetone.Ultrasonic doping makes Pd particles smaller and increases the contact area with gas.Meanwhile,the composition of n-p-n heterojunction and the synergistic effect of Pd/PdO improve the sensor performance.It shows that ultrasonic Pd doping provides a way to improve the utilization rate of doped metals and prepare highly selective gas sensors.

Construction Method for Performance Management Curriculum Content System Based on Knowledge Graph

Performance Management is the core course of human resource management major,but its knowledge points lack multi-dimensional correlations.There are problems such as scattered content and unclear system,and it is urgent to reconstruct the content system of the course.Knowledge graph technology can integrate massive and scattered information into an organic structure through semantic correlation and reasoning.The application of knowledge graph to education and teaching can promote scientific and personalized teaching evaluation and better realize individualized teaching.This paper systematically combs the knowledge points of Performance Management course and forms a comprehensive knowledge graph.The knowledge point is associated with specific questions to form the problem map of the course,and then the knowledge point is further associated with the ability target to form the ability map of the course.Then,the knowledge point is associated with teaching materials,question bank and expansion resources to form a systematic teaching database,thereby giving the method of building the content system of Performance Management course based on the knowledge map.This research can be further extended to other core management courses to realize the deep integration of knowledge graph and teaching.

Determination of Fructose and Glucose Contents in Honey by Liquid Chromatography-refractive Index Detection Method and Direct Titration Method

In this study, fructose and glucose contents in honey were determined by liquid chromatography-refractive index detection method and alkaline copper tartrate solution-direct titration method. According to the results, there were great differences between determination results of reducing sugar contents by liquid chromatography-refractive index detection method and alkaline copper tartrate solution-direct titration method. Specifically, average determination results of reducing sugar contents by liquid chromatography-refractive index detection method were reduced by about 9.5% compared with alkaline copper tartrate solution-direct titra- tion method. Subsequently, determination results of reducing sugar contents by two methods were compared and analyzed. Liquid chromatography-refractive index detection method was used to determine fructose and glucose monomers in honey, but alkaline copper tartrate solution-direct titration method was used to determine reducing sugar composition in honey, which might lead to significantly different results. Due to small sample size and limited conditions, the determination results were not necessarily representative. Bee product acquisition and processing enterprises and relevant departments should pay much attention on these issues and fully consider the current situation of grass-roots units to develop scientific, rigorous, simple, universal, convenient, low-cost and practicable standards, thus ensuring the safety and reliability of food quality.

Optimization of Extraction Process for Total Flavonoids from Penthorum chinense Pursh and Comparison of Their Contents from Different Parts

[Objectives]This study was conducted to optimize the extraction process of total flavonoids from Penthorum chinense Pursh and compare their contents from different parts.[Methods]Single factor and orthogonal experiments were designed to optimize the extraction process of total flavonoids from P.chinense Pursh with the volume fraction of ethanol,the ratio of material to liquid,heating reflux extraction time and extraction times as factors,and the content of total flavonoids as the index.A verification test was carried out.The optimized extraction process was adopted to compare the contents of total flavonoids from different parts of P.chinense Pursh.[Results]The best extraction process was extracting the powder of P.chinense Pursh for 2.0 h with 20 times of 55%ethanol by reflux twice.Under this condition,the contents of total flavonoids were 3.63%,8.90%,11.28%,and 4.36%from stems,leaves,flowers and whole grass of P.chinense Pursh,respectively.[Conclusions]The process is reasonable,feasible and stable,and can effectively extract total flavonoids from P.chinense Pursh.The contents of total flavonoids from different parts of P.chinense Pursh were quite different,and the value was higher in the leaves and flowers,so the proportions of leaves and flowers should be paid attention to in the industrial processing of P.chinense Pursh.

Xue and Haoxue:Learning Contents and Learning Attitude in The Analects of Confucius

The Analects(Lunyu論語)is a fundamental text for understanding the teachings of Confucius and offers an extensive account of the importance and methodology of learning(xue學)in the quest to become a junzi(君子),or exemplary person.This paper explores the contents and attitudes of learning as presented in The Analects,focusing on how Confucius’disciples and subsequent generations compiled and understood his teachings.Confucius emphasized that the ultimate goal of learning is to become a junzi.The term junzi originally referred to nobles or aristocrats but was redefined by Confucius to describe anyone who cultivates themselves to achieve moral excellence and serve society effectively.In The Analects,the concept of junzi is constructed through various entries that illustrate what a junzi should and should not do,highlighting attributes such as being highly principled,disciplined,ethical,and capable.Confucius outlined specific content areas for learning that were essential for personal and social development.These included learning cultural knowledge(學文),the Book of Changes(學易),the Book of Odes(學詩),the Book of Propriety(學禮),and the Way(學道).He believed that proper behavior,such as filial piety,respect for elders,trustworthiness,and benevolence,was a prerequisite for effective learning.Through the study of these classical texts,learners could cultivate their emotions,improve their observational abilities,and enhance their social skills.In addition to content,Confucius stressed the importance of having the right attitude towards learning.He valued the enjoyment of learning(好學)and praised those who pursued knowledge with diligence and an open mind.This attitude was exemplified by his favorite disciple,Yan Hui,who was noted for his ability to learn without repeating mistakes or transferring anger to others.Confucius himself also modeled this attitude,demonstrating a lifelong commitment to learning and self-improvement.In conclusion,The Analects presents learning as a holistic process that encompasses not only the acquisition of knowledge but also the development of moral and social virtues.Confucius’teachings emphasize that through persistent and disciplined learning,individuals can achieve personal growth and contribute positively to society,embodying the qualities of a true junzi.

Pitfalls of acid leaching method for determining organic and inorganic carbon contents in marine sediments

Organic and inorganic carbon contents of marine sediments are important to reconstruct marine productivity,global carbon cycle, and climate change. A proper method to separate and determine organic and inorganic carbons is thus of great necessity. Although the best method is still disputable, the acid leaching method is widely used in many laboratories because of its ease-of-use and high accuracy. The results of the elemental analysis of sediment trap samples reveal that organic and inorganic carbon contents cannot be obtained using the acid leaching method, causing an infinitely amplified error when the carbon content of the decarbonated sample is 12%±1% according to a mathematical derivation. Acid fumigation and gasometric methods are used for comparison, which indicates that other methods can avoid this problem in organic carbon analysis. For the first time, this study uncovers the pitfalls of the acid leaching method, which limits the implication in practical laboratory measurement, and recommends alternative solutions of organic/inorganic carbon determination in marine sediments.

Comparative Study of the Protein Contents of Local and Imported Rice Consumed in Senegal

Protein is essential for the growth and maintenance of the body. They play a crucial role in different biological processes. This study focuses on comparing the protein contents of local rice grown in the Senegal River valley and rice imported from Asia. The objective is to evaluate the importance of the protein nutritional value of local rice compared to imported rice. Protein contents were determined using the Kjeldahl method. The results of the protein assays show that local rice varieties such as Sahel 108 and Sahel 134 grown in the Thilène basins had protein percentages comparable to those of imported rice. The protein percentages were 15.19% ± 0.91% for the Sahel 108 variety and 16.62% ± 0.01% for the Sahel 134 variety compared to 15.8% ± 0.01% on average for imported rice. Thus from the point of view of protein content, local rice has a nutritional value identical to that of imported rice which it can validly replace. It is important in Senegal to encourage local production, which would make it possible to reduce imports on the one hand and to make quality rice available to the local Senegalese market on the other. Sahel varieties with high protein contents deserve large-scale development to meet the country’s protein needs.

Insight Into the Separation-of-Variable Methods for the Closed-Form Solutions of Free Vibration of Rectangular Thin Plates

The separation-of-variable(SOV)methods,such as the improved SOV method,the variational SOV method,and the extended SOV method,have been proposed by the present authors and coworkers to obtain the closed-form analytical solutions for free vibration and eigenbuckling of rectangular plates and circular cylindrical shells.By taking the free vibration of rectangular thin plates as an example,this work presents the theoretical framework of the SOV methods in an instructive way,and the bisection–based solution procedures for a group of nonlinear eigenvalue equations.Besides,the explicit equations of nodal lines of the SOV methods are presented,and the relations of nodal line patterns and frequency orders are investigated.It is concluded that the highly accurate SOV methods have the same accuracy for all frequencies,the mode shapes about repeated frequencies can also be precisely captured,and the SOV methods do not have the problem of missing roots as well.

Influence of Wheat Protein Contents and Fractions on Dough RheologicalProperties as Determined by Using a Reconstitution Method

A strong gluten wheat cultivar Shannong 12 and a medium-strength wheat cultivar Shannong 11 were used to investigate the effects of wheat protein contents and protein fractions on dough rheological properties using a reconstitution method. The results indicated that the peak height, peak width, peak integral, resistance to extension and area under the curve were increased when protein content increased to 120, 140, and 160% （w/w） of the protein content in the base flours for doughs made from each wheat cultivar. All protein fractions were added to each of the base flours at three levels （0.25, 0.50 and 1.00%, w/w） based upon the protein content. The mixograph dough development time, peak width, and resistance to extension increased when the glutenin, insoluble glutenin, soluble glutenin, and glutenin macropolymer were added and increased systematically with increasing levels of these fractions. Peak integral increased by adding and increasing protein content, however, albumin-globulin had no obvious effects. Extensibility at rupture decreased when the glutenin, insoluble glutenin, soluble glutenin, and glutenin macropolymer were added, and decreased systematically with increasing levels of these fractions. However, extensibility at rupture increased when the monomeric protein, albumin-globulin, and gliadin were added, and increased systematically with increasing levels of these fractions.

Determination of Ash Contents in Coal by Means of Ordinary Kriging Method

The ash contents in coal particles were examined in the paper dependably on particle size and its density. So, the two-dimensional regressive function Z = Z（P, D） was the searched object, where Z is random variable describing ash contents, P---density and D---particle diameter. This dependence was determined based on experimental data concerning the coal of type 31. For this coal, the method of ordinary kriging was applied to calculate the values of random variable Z. This method required the proper selection of so-called variogram function, in which four forms were considered in this paper in purpose to select the best solution. The given results were then evaluated by the mean standard error value and compared with empirical data.

Structural Modal Parameter Recognition and Related Damage Identification Methods under Environmental Excitations: A Review

Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters according to the monitoring data information in the structural health monitoring(SHM)system,so as to provide a scientific basis for structural damage identification and dynamic model modification.In view of this,this paper reviews methods for identifying structural modal parameters under environmental excitation and briefly describes how to identify structural damages based on the derived modal parameters.The paper primarily introduces data-driven modal parameter recognition methods(e.g.,time-domain,frequency-domain,and time-frequency-domain methods,etc.),briefly describes damage identification methods based on the variations of modal parameters(e.g.,natural frequency,modal shapes,and curvature modal shapes,etc.)and modal validation methods(e.g.,Stability Diagram and Modal Assurance Criterion,etc.).The current status of the application of artificial intelligence(AI)methods in the direction of modal parameter recognition and damage identification is further discussed.Based on the pre-vious analysis,the main development trends of structural modal parameter recognition and damage identification methods are given to provide scientific references for the optimized design and functional upgrading of SHM systems.

Effect of Freezing Rate and Freezing Method on Physical Properties of Fish Balls Made with Various Flour Contents

The objective was to investigate the major effect of freezing rate and freezing methods on physical properties of fish balls made with various flour contents. The fish balls were observed to be almost in temperature at -28℃ for air-blast freezer, at -100 ℃ in the liquid nitrogen and the standard house freezing were done at -18℃. The air-blast had the freezing rate of 11.82-20.84 cm h1 while those frozen by liquid nitrogen had the freezing rate of 13.36-22.38 cm/h and standard house freezer held lower freezing rate （7. ! 5-8.02 cm hl）. Texture profile analysis results showed that ubi badak＇s flour gel was harder, sticky, gummy and chewy than that of wheat and banana＇s flour gels. The proximate analysis revealed that wheat flour had higher protein and moisture content compared to banana and ubi badak flours.

Comparative Study on Phosphorus Contents of Soil in Karst Rocky Desertification Area during Eco-restoration Process in Guangxi Province

[Objective] The research aimed to study change law of phosphorus content of soil in karst rocky desertification region(KRD) during eco-restoration process such as Northwest Guangxi Province.[Method] The soil samples were collected from typical KRD in Pingguo County and Yizhou City.The determining quotas of different soil samples such as soil total phosphorus content and available phosphorus content were detected,in addition the soil total phosphorus content,available phosphorus content, urease activity, catalase activity and organic matter content in different soil samples were analyzed comparatively.[Result] Aspect,vegetation type and recovery time generated obviously influences on phosphorus contents in different soil samples.The concrete influence order was listed as follow: phosphorus content in soil of south slope was higher than that in soil of north slope;phosphorus content in soil where Zenia insignis Chun was planted was higher than that in soil of closed forest and that of soil where Dendrocalamus minor Var. amoen was planted,additionally,phosphorus increased with recovery time. Urease activity could be used as a monitoring index of soil fertility because it is related to the change of phosphorus content.[Conclusion] The soil of karst rocky desertification region in Northwest Guangxi Province could be recovered gradually if excessive human disturbance was stopped.If proper natural method of recovery promoted by human was taken,the recovery would reach a better result.

Effects of Sulfur Fertilizer Application Methods on Grain Protein Content During Filling Stage of Winter Wheat

[ Objective] The experiment aimed to provide a theoretical base of optimal cultivation management for the high yield and good quality and high efficiency of winter wheat. [ Method] The effects of two sulfur fertilizer application methods on dynamic changes of grain protein content and glutenin content of Yumai 49 and Yumai 66 during wheat grain filling stage were studied under the field conditions. [Result] Both the grain protein and glutenin content of two cultivars were increased by sulfur fertilizer, particularly, the effects on Yumai 49 were more significant.[ Conclusion] The grain content and glutenin content of different wheat cultivars could be increased by taking different sulfur fertilizer application methods.

Effects of Land Use Patterns on Soil Heavy Metal Contents

Through sampling in farmland and analysis in laboratory,the contents and the pollution level of Cr,Cu,As,Pb,Zn in different soils were studied. The comparative result showed that the As in all soil samples are lower than the mean value of Shaanxi and whole nation,the Cr in lower half soil samples are higher than the mean value of Shaanxi and whole nation,the Cu and Zn in majority soil samples are higher than the mean value of Shaanxi and whole nation,and the Pb in all soil samples is higher than the mean value of Shaanxi and whole nation. The single factor pollution index and multi-factor pollution index method were used to evaluate the soil pollution. According to Soil Environmental Quality Standard,the studied soils were at unpolluted degrees,the soils were clear,the quality of soil adapt to the crop growth,and not affect the quality of agricultural product.