Based on the experimental data by a full scale test model and the relevant existing achievements, four new concepts of group dust scrubbers were designed in the paper. The new dust scrubbers consist of two to four com...Based on the experimental data by a full scale test model and the relevant existing achievements, four new concepts of group dust scrubbers were designed in the paper. The new dust scrubbers consist of two to four common dust separators in series: wet fan, wet Venturi and foam filter bed. Wetting and foaming agents are used to increase the efficiency of dust separation. High efficiency is not required for each part of the group dust scrubbers, but the whole system has a high working reliability. All parts of the group dust scrubbers have the most suitable separating efficiency for different size and concentration of dust particles in airflow, according to their technical features. Four group dust scrubbers have a high efficiency from 94.4% to 99.7% for separating respirable dust at a rational cost.展开更多
A directive, legislated by the South African Department of Minerals and Energy(DME) in 1997, was introduced to reduce the dust exposures of continuous miner(CM) operators to below 5 mg/m3, when measured at the operato...A directive, legislated by the South African Department of Minerals and Energy(DME) in 1997, was introduced to reduce the dust exposures of continuous miner(CM) operators to below 5 mg/m3, when measured at the operator's cab position. The focus of this paper is to review the effectiveness of observing this rule for almost two decades and discuss industry perceptions arising from the application of this rule. The results have demonstrated that the engineering sample cannot predict the personal shift dust exposure of a CM operator. Therefore, it is recommended that the engineering sampling, as currently practiced,should be reviewed with the objective to discontinue and replace it by the approved PDM3700 realtime dust monitor.展开更多
This work proposes a vibrating mesh screen as an alternative to the static mesh screen currently used in conventional flooded-bed dust scrubbers for removing airborne coal mine dust in the continuous mining environmen...This work proposes a vibrating mesh screen as an alternative to the static mesh screen currently used in conventional flooded-bed dust scrubbers for removing airborne coal mine dust in the continuous mining environment.Fundamental assessments suggest that a vibrating screen may improve the dust collection efficiency of scrubber systems and mitigate the clogging issues associated with the conventional design.To evaluate this hypothesis,computational fluid dynamics(CFD)simulations were carried out to assess the effects of vibration conditions(i.e.,frequency and amplitude)on the dust particle-mesh interaction and mesh wetting conditions,which are the two decisive factors in determining the dust collection efficiency.The results suggest that the vibrating mesh screen can enhance dust particle collision opportunities on the mesh and increase mesh wetted area as compared to the static mesh screen.The effects of mesh screen aperture,coal dust concentration,and spray nozzle flow rate on the performance of the vibrating mesh are also evaluated.Finally,a simplified three-phase flow simulation including airflow,dust particles,and water droplet spray is performed,and the results reflect a significant improvement of dust collection efficiency in the liquid-coated vibrating mesh screen.展开更多
基金FoundationofChinaScholarshipCouncilforAbroad! (No .975 14 0 0 8)
文摘Based on the experimental data by a full scale test model and the relevant existing achievements, four new concepts of group dust scrubbers were designed in the paper. The new dust scrubbers consist of two to four common dust separators in series: wet fan, wet Venturi and foam filter bed. Wetting and foaming agents are used to increase the efficiency of dust separation. High efficiency is not required for each part of the group dust scrubbers, but the whole system has a high working reliability. All parts of the group dust scrubbers have the most suitable separating efficiency for different size and concentration of dust particles in airflow, according to their technical features. Four group dust scrubbers have a high efficiency from 94.4% to 99.7% for separating respirable dust at a rational cost.
文摘A directive, legislated by the South African Department of Minerals and Energy(DME) in 1997, was introduced to reduce the dust exposures of continuous miner(CM) operators to below 5 mg/m3, when measured at the operator's cab position. The focus of this paper is to review the effectiveness of observing this rule for almost two decades and discuss industry perceptions arising from the application of this rule. The results have demonstrated that the engineering sample cannot predict the personal shift dust exposure of a CM operator. Therefore, it is recommended that the engineering sampling, as currently practiced,should be reviewed with the objective to discontinue and replace it by the approved PDM3700 realtime dust monitor.
基金sponsored by the Alpha Foundation for the Improvement of Mine Safety and Health, Inc. (Alpha Foundation)
文摘This work proposes a vibrating mesh screen as an alternative to the static mesh screen currently used in conventional flooded-bed dust scrubbers for removing airborne coal mine dust in the continuous mining environment.Fundamental assessments suggest that a vibrating screen may improve the dust collection efficiency of scrubber systems and mitigate the clogging issues associated with the conventional design.To evaluate this hypothesis,computational fluid dynamics(CFD)simulations were carried out to assess the effects of vibration conditions(i.e.,frequency and amplitude)on the dust particle-mesh interaction and mesh wetting conditions,which are the two decisive factors in determining the dust collection efficiency.The results suggest that the vibrating mesh screen can enhance dust particle collision opportunities on the mesh and increase mesh wetted area as compared to the static mesh screen.The effects of mesh screen aperture,coal dust concentration,and spray nozzle flow rate on the performance of the vibrating mesh are also evaluated.Finally,a simplified three-phase flow simulation including airflow,dust particles,and water droplet spray is performed,and the results reflect a significant improvement of dust collection efficiency in the liquid-coated vibrating mesh screen.
