When a cold rolled strip is being treated in a continuous annealing furnace which is full of protective gas, the gas tightness of the furnace body, the connected facilities and the gas channels become an important ind...When a cold rolled strip is being treated in a continuous annealing furnace which is full of protective gas, the gas tightness of the furnace body, the connected facilities and the gas channels become an important indicator that directly affects the product＇s surface quality and shows the technical level of the design, the manufacture and the installation. By considering the problems of the gas tightness of a vertical annealing furnace in the installation and maintenance, this thesis evaluates the gas tightness indicator and gas tightness related level of the furnace body and the circulation duct, while studying and analyzing the technologies of negative-pressure leak detection and sealing.展开更多
Cold-rolled high strength steel sheets for automobiles contain more Mn and Si based alloy elements, which, under the reducing atmosphere in the annealing furnace, will get enriched on the strip surface. Since the furn...Cold-rolled high strength steel sheets for automobiles contain more Mn and Si based alloy elements, which, under the reducing atmosphere in the annealing furnace, will get enriched on the strip surface. Since the furnace rollers and the strips contact frequently, alloy elements on the roller surface will form hard protuberance. We call this protuberance ＂pick-up＂. In addition, with the increase of the amount of dust in the furnace atmosphere, the occurrence of furnace roller pick-up will also increase. Through chemical reaction and physical accumulation analysis combined with practical experience, the causes of pick-up in different furnace sections were analyzed. Methods of preventing furnace roller pick-up in the high strength steel sheet processing line were discussed and solutions to improving the strip surface quality in the continous annealing furnace were provided.展开更多
In order to reduce the strip deviation in the practical production procedure in the continuous annealing fur- nace, a dynamic simulation model was built through finite element method （FEM） to conduct the quantificat...In order to reduce the strip deviation in the practical production procedure in the continuous annealing fur- nace, a dynamic simulation model was built through finite element method （FEM） to conduct the quantification cal- culation of the effect of regular roller contour types on strip deviation. The result reveals that comparing to the flat roller, forward roller contour can prevent the strip deviation to some degree. In terms of prevention ability, double- taper roller is the strongest, single-taper roller and crown roller are less stronger; and more roller contour values raise the prevention ability. Accordingly, optimization method was applied to continuous annealing furnace, and it largely reduced accidents such as strip break and limited speed that are caused by the deviation.展开更多
The mechanism for heat transfer of radiation is usually adopted to heat strip in vertical continuous annealing furnace. The rate of heat transfer among strip and other objects can be hugely affected by the parameters ...The mechanism for heat transfer of radiation is usually adopted to heat strip in vertical continuous annealing furnace. The rate of heat transfer among strip and other objects can be hugely affected by the parameters of strip speed, geometry factors and radiating characteristic of surfaces of strip, radiating tubes and walls of furnace. A model including all parameters is proposed for calculating the heat transfer coefficient, predicting the strip tempera- ture and boundary temperature of strip through analyzing these parameters. The boundary temperature is a important datum and different from average arithmetic value of temperature of strip and temperature in furnace. Also, the model can be used to analyze the relation for temperature of strip and heat transfer coefficient, total heat transfer quantity and heating time. The model is built by using the radiating heat transfer rate, the Newtonrs law of cooling, and lumped system analysis. The results of calculation are compared to the data from production line. The comparisons indicate that the model can well predict the heating process. The model is already applied for process control in pro- duction line. Also, this research will provide a new method for analyzing the radiation heat transfer.展开更多
文摘When a cold rolled strip is being treated in a continuous annealing furnace which is full of protective gas, the gas tightness of the furnace body, the connected facilities and the gas channels become an important indicator that directly affects the product＇s surface quality and shows the technical level of the design, the manufacture and the installation. By considering the problems of the gas tightness of a vertical annealing furnace in the installation and maintenance, this thesis evaluates the gas tightness indicator and gas tightness related level of the furnace body and the circulation duct, while studying and analyzing the technologies of negative-pressure leak detection and sealing.
文摘Cold-rolled high strength steel sheets for automobiles contain more Mn and Si based alloy elements, which, under the reducing atmosphere in the annealing furnace, will get enriched on the strip surface. Since the furnace rollers and the strips contact frequently, alloy elements on the roller surface will form hard protuberance. We call this protuberance ＂pick-up＂. In addition, with the increase of the amount of dust in the furnace atmosphere, the occurrence of furnace roller pick-up will also increase. Through chemical reaction and physical accumulation analysis combined with practical experience, the causes of pick-up in different furnace sections were analyzed. Methods of preventing furnace roller pick-up in the high strength steel sheet processing line were discussed and solutions to improving the strip surface quality in the continous annealing furnace were provided.
基金Sponsored by National Science and Technology Support Program of China ( 2011SAE23B00 )
文摘In order to reduce the strip deviation in the practical production procedure in the continuous annealing fur- nace, a dynamic simulation model was built through finite element method （FEM） to conduct the quantification cal- culation of the effect of regular roller contour types on strip deviation. The result reveals that comparing to the flat roller, forward roller contour can prevent the strip deviation to some degree. In terms of prevention ability, double- taper roller is the strongest, single-taper roller and crown roller are less stronger; and more roller contour values raise the prevention ability. Accordingly, optimization method was applied to continuous annealing furnace, and it largely reduced accidents such as strip break and limited speed that are caused by the deviation.
基金Item Sponsored by National Science and Technology Support Program for 12th Five-Year Plan of China(2011BAE13B02)
文摘The mechanism for heat transfer of radiation is usually adopted to heat strip in vertical continuous annealing furnace. The rate of heat transfer among strip and other objects can be hugely affected by the parameters of strip speed, geometry factors and radiating characteristic of surfaces of strip, radiating tubes and walls of furnace. A model including all parameters is proposed for calculating the heat transfer coefficient, predicting the strip tempera- ture and boundary temperature of strip through analyzing these parameters. The boundary temperature is a important datum and different from average arithmetic value of temperature of strip and temperature in furnace. Also, the model can be used to analyze the relation for temperature of strip and heat transfer coefficient, total heat transfer quantity and heating time. The model is built by using the radiating heat transfer rate, the Newtonrs law of cooling, and lumped system analysis. The results of calculation are compared to the data from production line. The comparisons indicate that the model can well predict the heating process. The model is already applied for process control in pro- duction line. Also, this research will provide a new method for analyzing the radiation heat transfer.
