西藏交通警察道路执法工作的风险与防范

西藏自治区自然、地理与气候环境复杂且特殊,道路交通环境相对恶劣,这导致当地交通警察道路执法工作面临诸多风险,包括警员人身安全和执法效能等风险。对此,文章对西藏交通警察道路执法工作风险进行了调查分析,从地区环境、警员安全意识与技能、执法装备、社会宣传和教育等角度探讨了相关风险的成因,针对性相关风险成因,提出从优化警力配置与道路信息推送、加强警员培训、完善警务装备、加强法治化宣传教育等工作来消除相关风险,以期保障警员安全并改善西藏交通环境。

Comparative Geospatial Planning Model for “Location Specific” Intervention and Continuous Improvement Strategy

Sustainable development can only be achieved by conscious planning and implementation of action plans. Decision making requires a careful selection of the right conceptual framework and models for planning and implementation processes. Planning process models dictate in very clear terms what must be done and how it is done to achieve a successful completion of a process of activity [1]. Since about 80% of data used to support decisions are geographically related [3], it is necessary to put Geographic Information Systems (GIS) at the core of the planning and implementation model. There exists a great disparity in a heterogeneous world. The locational disparity in achieving sustainable development, therefore, necessitates a planning model that is “location specific” i.e. identifies areas (locations) requiring intervention and areas (locations) requiring continuous improvement strategies. This was achieved in this study by reviewing Bell’s Information System Strategic Planning Model and Kaufman’s Strategic Planning Model, and the designing of new model to overcome the limitation of existing models. Practical application of the new model was carried out in education planning and administration in order to achieve the global goals for sustainable development 4 (quality education). Finding shows that the Comparative Geospatial Planning Model for “Location Specific” Intervention and Continuous Improvement Strategy is useful to support the achievement of sustainable development goals in multidisciplinary, multi-sector applicable instances.

Effect of the Design Parameters on the Performance of Inner-Recycling Continuous Sand Filter

A novel integrated water treatment facility, inner-recycling continuous sand filter, is discussed. The theory of micro-flocculation is applied in the sand-washing circulation system with continuous filtration and backwashing. The design and operation parameters, which affect the performance of the filter, are discussed. The key design parameters are provided as follows: diameter of filter material is 0.7 to 1.0 mm, depth of filter bed is 0.6 m, filtration velocity is less than 12 m/h, ratio of gas to water is 9:11 and sand recycling rate is 2 to 4 mm/min.

Empirical Analysis on Continuous Improvement of Mobile Content Services＇ Effects on Continuance Use Intention

With the development of intelligent terminals and mobile applications,the influence of continuous improvement on mobile content services to the continuance use intention is more and more significant.Based on the expectation-confirmation theory and information system continuance use theory,this paper proposes a mobile content continuance use model and puts forward related assumptions under the mobile commerce environment by introducing the continuous improvement variables.Questionnaire data are collected from 219 mobile content service users for research,and the hypothetical model is validated by the structural equation modeling.Results show that the information system continuance use model is still valid under the mobile commerce environment,and the continuous improvement on mobile content services have positive impacts on user's expectations after they have experienced certain mobile content services.

Cyberattack Ramifications, The Hidden Cost of a Security Breach

In this in-depth exploration, I delve into the complex implications and costs of cybersecurity breaches. Venturing beyond just the immediate repercussions, the research unearths both the overt and concealed long-term consequences that businesses encounter. This study integrates findings from various research, including quantitative reports, drawing upon real-world incidents faced by both small and large enterprises. This investigation emphasizes the profound intangible costs, such as trade name devaluation and potential damage to brand reputation, which can persist long after the breach. By collating insights from industry experts and a myriad of research, the study provides a comprehensive perspective on the profound, multi-dimensional impacts of cybersecurity incidents. The overarching aim is to underscore the often-underestimated scope and depth of these breaches, emphasizing the entire timeline post-incident and the urgent need for fortified preventative and reactive measures in the digital domain.

Co-continuous Composite Material Design Using the Volumetric Distance Field Based on Analytic Shape Functions

An effective and simple design method for co-continuous composite material construction is proposed by using a hybrid methodology with triply periodic minimal surface( TPMS) cellular topology and the volumetric distance field( VDF). After generating a set of VDF-based features for the given exterior shape and desired internal core structure,a series of simple modifications in distance fields enabled us to obtain an arbitrarily-shaped complex co-continuous composite material computational model. Design results and manufactured prototypes through 3 D printing technology show that the proposed methodology has the potential to open a new paradigm for producing multifunctional next generation co-continuous composite materials which are impossible to design and manufacture using traditional CAD and CAM.

Using quality improvement methods to increase use of pain prevention strategies for childhood vaccination

AIM To increase evidence-based pain prevention strategy use during routine vaccinations in a pediatric primary care clinic using quality improvement methodology.METHODS Specific intervention strategies(i.e.,comfort positioning,nonnutritive sucking and sucrose analgesia,distraction) were identified,selected and introduced in three waves,using a Plan-Do-Study-Act framework.System-wide change was measured from baseline to post-intervention by:(1) percent of vaccination visits during which an evidence-based pain prevention strategy was reported as being used; and(2) caregiver satisfaction ratings following the visit.Additionally,self-reported staff and caregiver attitudes and beliefs about pain prevention were measured at baseline and 1-year post-intervention to assess for possible long-term cultural shifts.RESULTS Significant improvements were noted post-intervention.Use of at least one pain prevention strategy was documented at 99% of patient visits and 94% of caregivers were satisfied or very satisfied with the pain prevention care received.Parents/caregivers reported greater satisfaction with the specific pain prevention strategy used [t(143) = 2.50,P ≤ 0.05],as well as greater agreement that the pain prevention strategies used helped their children's pain [t(180) = 2.17,P ≤ 0.05] and that they would be willing to use the same strategy again in the future [t(179) = 3.26,P ≤ 0.001] as compared to baseline.Staff and caregivers also demonstrated a shift in attitudes from baseline to 1-year post-intervention.Specifically,staff reported greater agreement that the pain felt from vaccinations can result in harmful effects [2.47 vs 3.10; t(70) =-2.11,P ≤ 0.05],less agreement that pain from vaccinations is "just part of the process" [3.94 vs 3.23; t(70) = 2.61,P ≤ 0.05],and less agreement that parents expect their children to experience pain during vaccinations [4.81 vs 4.38; t(69) = 2.24,P ≤ 0.05].Parents/caregivers reported more favorable attitudes about pain prevention strategies for vaccinations across a variety of areas,including safety,cost,time,and effectiveness,as well as less concern about the pain their children experience with vaccination [4.08 vs 3.26; t(557) = 6.38,P ≤ 0.001],less need for additional pain prevention strategies [3.33 vs 2.81; t(476) = 4.51,P ≤ 0.001],and greater agreement that their doctors' office currently offers pain prevention for vaccinations [3.40 vs 3.75; t(433) =-2.39,P ≤ 0.05].CONCLUSION Quality improvement methodology can be used to help close the gap in implementing pain prevention strategies during routine vaccination procedures for children.

Environmental Renovation and Improvement Strategies for the Great Relics——A Case Study of Landscape Planning for the Front Hall Relics of the Weiyang Palace in China

Through introducing concepts of great relics and its protective planning theories, construction of relics park is a characteristic protection mode for cultural heritage in China, and also a useful exploration in the combination of theories and practices of great relics protection. Moreover, it is also the best means of protecting great relics ever found. Taking landscape planning of the front hall relics of the Weiyang Palace, relics of the front hall was believed to have great scientific value, so its environmental renovation and improvement should be based on scientific landscape planning, the whole relics should be protected and displayed scientifically and completely, landscape elements introduced as the effective texture by applying ecological patterns according to actual conditions, new techniques favorable for the protection and scientific research of relics adopted to provide a new strategy for the construction of great ruins park in China.

From Hölder Continuous Solutions of 3D Incompressible Navier-Stokes Equations to No-Finite Time Blowup on [ 0,∞ ]

This article gives a general model using specific periodic special functions, that is, degenerate elliptic Weierstrass P functions composed with the LambertW function, whose presence in the governing equations through the forcing terms simplify the periodic Navier Stokes equations (PNS) at the centers of arbitrary r balls of the 3-Torus. The continuity equation is satisfied together with spatially periodic boundary conditions. The yicomponent forcing terms consist of a function F as part of its expression that is arbitrarily small in an r ball where it is associated with a singular forcing expression both for inviscid and viscous cases. As a result, a significant simplification occurs with a v3(vifor all velocity components) only governing PDE resulting. The extension of three restricted subspaces in each of the principal directions in the Cartesian plane is shown as the Cartesian product ℋ=Jx,t×Jy,t×Jz,t. On each of these subspaces vi,i=1,2,3is continuous and there exists a linear independent subspace associated with the argument of the W function. Here the 3-Torus is built up from each compact segment of length 2R on each of the axes on the 3 principal directions x, y, and z. The form of the scaled velocities for non zero scaled δis related to the definition of the W function such that e−W(ξ)=W(ξ)ξwhere ξdepends on t and proportional to δ→0for infinite time t. The ratio Wξis equal to 1, making the limit δ→0finite and well defined. Considering r balls where the function F=(x−ai)2+(y−bi)2+(z−ci)2−ηset equal to −1e+rwhere r>0. is such that the forcing is singular at every distance r of centres of cubes each containing an r-ball. At the centre of the balls, the forcing is infinite. The main idea is that a system of singular initial value problems with infinite forcing is to be solved for where the velocities are shown to be locally Hölder continuous. It is proven that the limit of these singular problems shifts the finite time blowup time ti∗for first and higher derivatives to t=∞thereby indicating that there is no finite time blowup. Results in the literature can provide a systematic approach to study both large space and time behaviour for singular solutions to the Navier Stokes equations. Among the references, it has been shown that mathematical tools can be applied to study the asymptotic properties of solutions.

Development of a Competitiveness Improvement Framework for Forensic Science Laboratories

This study presents a methodology used in developing the competitiveness improvement framework (CIF) for laboratories, in particular, Forensic Science Laboratories (FSLs). The cyclic nature of FSL processes allowed data collection for the purpose of identification of factors affecting FSL performance (cause factors). Flow charts were used to represent mathematical formulations for cause factor measurements and quantification of the baseline data on turnaround time (TAT), backlogs for case files (Bg), turnaround time in the supply chain (Tsc), and employee absenteeism (Ab). By quantifying the cause factors in addition to academic development coefficient (Ad) and complex longevity (Lc) for FSL employees, it was possible to establish the organizational design features requiring improvements. The relevance of cause factors to FSL stakeholders and means of improvement and sustainability were established. A detailed road map towards CIF was presented using D-MAIC methodology. The rated cause factors based on challenges in the FSL business environment were subjected to Pareto analysis to prioritize the challenges in order to improve FSLs’ competitiveness. The interrelationship between the three dimensions of competitiveness improvement (process, performance and planning) was presented in terms of the affected six cause factors. Also, the potential lean practices for improving competitiveness of FSL based on measured cause factors have been presented. This paper introduced methods and measures for improving operational competitiveness of laboratories. The CIF was finally presented in a form of a series of three flow charts summarizing all steps implemented in its development with inputs and cause factors involved.

Analytical Research on Deformation Monitoring of Large Span Continuous Rigid Frame Bridge during Operation

Based on a large span continuous rigid frame bridge in Chongqing of China, the main pier vertical displacement and deviation, the bridge deck alignment and the expansion joint deformation are analytically researched during operation. Firstly, the monitoring content and method of the large span continuous rigid frame bridge are clearly stated. Secondly, by finite element software Midas Civil, the relevant deformation values of the bridge are calculated. Thirdly, in practice, the relevant deformation values of the bridge are measured. Finally, the measured values in practice are compared with the calculated ones by the finite element software Midas Civil, finding that the former is less than the latter, and it can be concluded that the bridge is basically in the normal working condition. In this paper, the analytical research on the deformation monitoring can provide the basis for similar bridges, which has good practical significance.

安哥拉山羊改良建昌黑山羊生产马海毛横交方案的研究

以安哥拉山羊、建昌黑山羊、一代羊(F1)、二代羊(F2)、三代羊(F3)、二代与三代同质个体横交后代(H)为供试羊只,采用形态遗传标记、生化遗传标记和分子遗传标记确定安哥拉山羊改良建昌黑山羊生产马海毛的横交方案。结果:F2、F3 和H白色毛被分别为93 5%、100%和100%,毛被同质和基本同质个体分别为27 7%、70 2%和65 3%;成年羊产毛量随代数增加而增加,但F3 和H与F2,H 与F3 公、母羊分别对应比较,差异均不显著(P>0 05)。成年羊体重F1 和F2 增加,杂种优势明显,但F3 母羊则不显著(P>0 05),H还有下降(P>0 05)。平均基因杂合度和一致度安哥拉山羊、建昌黑山羊、F3、H分别为0 113 1 和0 886 9, 0 062 1 和0 937 9, 0 110 3 和0 889 7, 0 110 4和0 889 6。安哥拉山羊与F3 和H的遗传距离小,分别为0 003 9和0 004 0,遗传相似系数大,相应为0 996 1、0 996 0。群体内谱带相似系数,安哥拉山羊、F2、F3 和H分别为0 454 0,0 407 6,0 611 3 和0 610 9。且F3 和H均极显著大于安哥拉山羊(P<0 01)。综合研究表明,可在F2 和F3 代中选择理想同质个体进行横交。

Applying knowledge management implementation model in Water Resources Management Company by the purpose of continuous improvement

This research seeks to explore the current knowledge management （KM） practice in the Water Recourses Management Company （WRMC） according to Jashpar＇s knowledge management cycle which comprises four loops, including knowledge creation, knowledge organization, knowledge sharing and knowledge leverage. This research used a qualitative method, and data were collected through questionnaires. The 92 respondents were the staff of office. The data were analyzed through SPSS software. The findings of this research reveal that, the knowledge creation and knowledge organization were in good level, but knowledge sharing condition was not suitable, therefore, it has negative effect on leveraging knowledge, hence we tried to demonstrate a knowledge management implementation model using the knowledge management concept and taking advantage from the concept of excellence model by the purpose of continuous improvement. This paper suggests proper knowledge management implementation （KMI） is a managerial approach that can turn an organization to an agile one. In order to verify and validate the performed research, the planned model has been accomplished in the Hydropower Plant Department, Water Recourses Management Company, positive and acceptable results were obtained and organizations total factor productivity increase was achieved which was appreciated by the organization.

An Optimal Feed Interpolator Based on G^2 Continuous Bézier Curves for High-Speed Machining of Linear Tool Path

A numerical control (NC) tool path of digital CAD model is widely generated as a set of short line segments in machining. However, there are three shortcomings in the linear tool path, such as discontinuities of tangency and curvature, huge number of line segments, and short lengths of line segments. These disadvantages hinder the development of high speed machining. To smooth the linear tool path and improve machining efficiency of short line segments, this paper presents an optimal feed interpolator based on G^2 continuous Bézier curves for the linear tool path. First, the areas suitable for fitting are screened out based on the geometric characteristics of continuous short segments (CSSs). CSSs in every area are compressed and fitted into a G^2 Continuous Bézier curve by using the least square method. Then a series of cubic Bézier curves are generated. However, the junction between adjacent Bézier curves is only G^0 continuous. By adjusting the control points and inserting Bézier transition curves between adjacent Bézier curves, the G^2 continuous tool path is constructed. The fitting error is estimated by the second-order Taylor formula. Without iteration, the fitting algorithm can be implemented in real-time environment. Second, the optimal feed interpolator considering the comprehensive constraints (such as the chord error constraint, the maximum normal acceleration, servo capacity of each axis, etc.) is proposed. Simulation and experiment are conducted. The results shows that the proposed method can generate smooth path, decrease the amount of segments and reduce machining time for machining of linear tool path. The proposed research provides an effective method for high-speed machining of complex 2-D/3-D profiles described by short line segments.

丹参对CAPD大鼠腹膜间皮细胞凋亡及凋亡相关基因的影响

目的:探讨丹参对持续性非卧床式腹膜透析(CAPD)相关性腹膜硬化的治疗价值。方法:将40只大鼠随机分为对照组(A组,给予0.9%NaCl40mL/d),凋亡模型组(B组,给予4.25%腹透液40mL/d),低剂量丹参组(C组,给予4.25%腹透液40mL/d和600mg·kg-·1d-1丹参),高剂量丹参组(D组,给予4.25%腹透液40mL/d和2400mg·kg-·1d-1丹参)。8周后检测腹膜间皮细胞凋亡及促凋亡基因(Fas)和抑凋亡基因(Bcl-2)的蛋白表达,计算凋亡细胞指数(AI)和基因的蛋白阳性表达指数(PEI)。结果:B组FasPEI高于A组(P<0.01),C、D组FasPEI明显低于B组(P<0.01),与A组相近(P>0.05)。A、B、C组Bcl-2PEI差别无统计学意义,D组Bcl-2PEI明显高于A、B组(P<0.01)。B组AI明显高于A组,C、D组AI明显低于B组(P<0.01)。结论:丹参可通过下调Fas基因的蛋白表达,上调Bcl-2基因的蛋白表达,对CAPD时腹膜间皮细胞凋亡产生抑制作用。

PSO算法结合BP神经网络在传感器静态非线性校正中的应用

将粒子群优化(PSO)算法与BP神经网络相结合,应用在传感器静态非线性特性的校正中.用PSO算法所得到的全局最优值作为BP神经网络的初始权值,训练BP神经网络,训练结束后的神经网络作为传感器的静态特性校正器.应用结果表明,该方法可以提高BP神经网络的精度,并且该神经网络具有良好的泛化能力. Abstract： A static nonlinear errors method for correcting the sensors based on BP neural network using particle swarm optimization (PSO) is described. The global best values of particle swarm are used as initial weights of BP neural network to train BP neural network. Then the trained neural network is regarded as the sensor's corrector. The application results show that this method can improve the precision of the BP neural network, and the generalization capability of the neural network is good.

An Approach to Continuous Approximation of Pareto Front Using Geometric Support Vector Regression for Multi-objective Optimization of Fermentation Process

The approaches to discrete approximation of Pareto front using multi-objective evolutionary algorithms have the problems of heavy computation burden, long running time and missing Pareto optimal points. In order to overcome these problems, an approach to continuous approximation of Pareto front using geometric support vector regression is presented. The regression model of the small size approximate discrete Pareto front is constructed by geometric support vector regression modeling and is described as the approximate continuous Pareto front. In the process of geometric support vector regression modeling, considering the distribution characteristic of Pareto optimal points, the separable augmented training sample sets are constructed by shifting original training sample points along multiple coordinated axes. Besides, an interactive decision-making(DM)procedure, in which the continuous approximation of Pareto front and decision-making is performed interactively, is designed for improving the accuracy of the preferred Pareto optimal point. The correctness of the continuous approximation of Pareto front is demonstrated with a typical multi-objective optimization problem. In addition,combined with the interactive decision-making procedure, the continuous approximation of Pareto front is applied in the multi-objective optimization for an industrial fed-batch yeast fermentation process. The experimental results show that the generated approximate continuous Pareto front has good accuracy and completeness. Compared with the multi-objective evolutionary algorithm with large size population, a more accurate preferred Pareto optimal point can be obtained from the approximate continuous Pareto front with less computation and shorter running time. The operation strategy corresponding to the final preferred Pareto optimal point generated by the interactive DM procedure can improve the production indexes of the fermentation process effectively.

Oocyte quality improvement using a herbal medicine comprising 7 crude drugs

Maternal age is a significant factor in infertility treatment. Ovarian function and oocyte quality decrease with age, whereas the frequency of chromosomal abnormalities increases. In this study, improvement of oocyte quality and ovarian function were attempted using a herbal medicine comprising 7 crude drugs:Angelicae radix,Rehmanniae radix,Plantaginis semen,Lonicerae flos,Carthami flos,Ginseng radix, andCucurbita moschata Duch. Thirty-one women who repeatedly failed to conceive by intracytoplasmic sperm injection took the herbal medicine before breakfast and dinner from the start of menstrual cycle in the ovum pickup cycle. Average patient age was 38.5 ± 0.7 years, and the average ovum pickup frequency on the first dosage day was 7.9 ± 1.5. To analyze the effects of herbal medicine intake, the number of recovered and mature oocytes, their morphology and physical qualities, as well as the rates of fertilization, oocyte development, and pregnancy was compared before and after intake. The recovered and mature oocyte numbers, oocyte morphology and physical qualities, and fertilization rate were not significantly different before and after drug intake. However, the oocyte development rate was significantly higher(58.0%) after herbal medicine intake than before (32.5%;p = 0.0003). Moreover, the successful pregnancy rate was significantly higher after intake than before (6.9% versus 0%;p = 0.0111). Herbal medicine may constitute a useful adjunct to assisted reproductive technology in women.

Existence of a Hölder Continuous Extension on Embedded Balls of the 3-Torus for the Periodic Navier Stokes Equations

This article gives a general model using specific periodic special functions, which is degenerate elliptic Weierstrass P functions whose presence in the governing equations through the forcing terms simplify the periodic Navier Stokes equations (PNS) at the centers of cells of the 3-Torus. Satisfying a divergence-free vector field and periodic boundary conditions respectively with a general spatio-temporal forcing term which is smooth and spatially periodic, the existence of solutions which have finite time singularities can occur starting with the first derivative and higher with respect to time. The existence of a subspace of the solution space where v3 is continuous and {C, y1, y12}, is linearly independent in the additive argument of the solution in terms of the Lambert W function, (y12=y2, C∈R) together with the condition v2=-2y1v1. On this subspace, the Biot Savart Law holds exactly [see Section 2 (Equation (13))]. Also on this subspace, an expression X (part of PNS equations) vanishes which contains all the expressions in derivatives of v1 and v2 and the forcing terms in the plane which are related as with the cancellation of all such terms in governing PDE. The y3 component forcing term is arbitrarily small in ε ball where Weierstrass P functions touch the center of the ball both for inviscid and viscous cases. As a result, a significant simplification occurs with a v3 only governing PDE resulting. With viscosity present as v changes from zero to the fully viscous case at v =1 the solution for v3 reaches a peak in the third component y3. Consequently, there exists a dipole which is not centered at the center of the cell of the Lattice. Hence since the dipole by definition has an equal in magnitude positive and negative peak in y3, then the dipole Riemann cut-off surface is covered by a closed surface which is the sphere and where a given cell of dimensions [-1, 1]3 is circumscribed on a sphere of radius 1. For such a closed surface containing a dipole it necessarily follows that the flux at the surface of the sphere of v3 wrt to surface normal n is zero including at the points where the surface of sphere touches the cube walls. At the finite time singularity on the sphere a rotation boundary condition is deduced. It is shown that v3 is spatially finite on the Riemann Sphere and the forcing is oscillatory in y3 component if the velocity v3 is. It is true that . A boundary condition on the sphere shows the rotation of a sphere of viscous fluid. Finally on the sphere a solution for v3 is obtained which is proven to be Hölder continuous and it is shown that it is possible to extend Hölder continuity on the sphere uniquely to all of the interior of the ball.

Integrated design optimization of composite frames and materials for maximum fundamental frequency with continuous fiber winding angles

Fiber reinforced composite frame structure is an ideal lightweight and large-span structure in the fields of aerospace,satellite and wind turbine.Natural fundamental frequency is one of key indicators in the design requirement of the composite frame since structural resonance can be effectively avoided with the increase of the fundamental frequency.Inspired by the concept of integrated design optmization of composite frame structures and materials,the design optimization for the maximum structural fundamental frequency of fiber reinforced frame structures is proposed.An optimization model oriented at the maximum structural fundamental frequency under a composite material volume constraint is established.Two kinds of independent design variables are optimized,in which one is variables represented structural topology,the other is variables of continuous fiber winding angles.Sensitivity analysis of the frequency with respect to the two kinds of independent design variables is implemented with the semi-analytical sensitivity method.Some representative examples in the manuscript demonstrate that the integrated design optimization of composite structures can effectively explore coupled effects between structural configurations and material properties to increase the structural fundamental frequency.The proposed integrated optimization model has great potential to improve composite frames structural dynamic performance in aerospace industries.