Regulating the non-effective carriers transport for high-performance lithium metal batteries

The absence of control over carriers transport during electrochemical cycling,accompanied by the deterioration of the solid electrolyte interphase(SEI)and the growth of lithium dendrites,has hindered the development of lithium metal batteries.Herein,a separator complexion consisting of polyacrylonitrile(PAN)nanofiber and MIL-101(Cr)particles prepared by electrospinning is proposed to bind the anions from the electrolyte utilizing abundant effective open metal sites in the MIL-101(Cr)particles to modulate the transport of non-effective carriers.The binding effect of the PANM separator promotes uniform lithium metal deposition and enhances the stability of the SEI layer and long cycling stability of ultra-high nickel layered oxide cathodes.Taking PANM as the Li||NCM96 separator enables high-voltage cycling stability,maintaining 72%capacity retention after 800 cycles at a charging and discharging rate of 0.2 C at a cut-off voltage of 4.5 V and 0°C.Meanwhile,the excellent high-rate performance delivers a specific capacity of 156.3 mA h g^(-1) at 10 C.In addition,outstanding cycling performance is realized from−20 to 60°C.The separator engineering facilitates the electrochemical performance of lithium metal batteries and enlightens a facile and promising strategy to develop fast charge/discharge over a wide range of temperatures.

Queuing-Based Performance Analytical Model for Continuous Flow Transporters of AMHS

To quickly and accurately estimate the expected work-in-process (WIP)of material intersection points in continuous automated material handling systems (AMHSs) ,a queuing-based performance analytical model was presented for continuous flow transporters (CFTs) . In the modeling procedure which considered layout of crossovers and the variability of service time of turntables, an M /G /1 queuing model with multi-class customers and a non-preemptive priority M /G /1 queuing model with multi-class customers were introduced to accurately present the queuing WIP of each material intersection point and perform the analytical model. Finally,300 mm wafer fabrication facilities (fabs)with 24 bays were applied to evaluating the proposed model. Compared with results of an Arena simulation, the model performs well in evaluating the number of queuing WIP of the intersection points and overall system of CFTs in AMHSs.

Electrolyte-mediated dense integration of graphene-MXene films for high volumetric capacitance flexible supercapacitors

High conductivity two-dimensional(2D)materials have been proved to be potential electrode materials for flexible supercapacitors because of its outstanding chemical and physical properties.However,electrodes based on 2D materials always suffer from limited electrolyte-accessible surface due to the restacking of the 2D sheets,hindering the full utilization of their surface area.In this regard,an electrolyte-mediated method is used to integrate dense structure reduced graphene oxide/MXene(RGM)-electrolyte composite films.In such composite films,reduced graphene oxide(RGO)and MXene sheets are controllable assembly in compact layered structure with electrolyte filled between the layers.The electrolyte layer between RGO and MXene sheets forms continuous ion transport channels in the composite films.Therefore,the RGM-electrolyte composite films can be used directly as self-supporting electrodes for supercapacitors without additional conductive agents and binders.As a result,the composite films demonstrate enhanced volumetric specific capacity,improved volumetric energy density and higher power density compared with both pure RGO electrode and porous composite electrode prepared by traditional methods.Specifically,when the mass ratio of MXene is 30%,the electrode delivers a volumetric specific capacity of 454.9 F·cm^(−3) with a high energy density of 39.4 Wh·L^(−1).More importantly,supercapacitors based on the composite films exhibit good flexibility electrochemical performance.The investigation provides a new approach to synthesize dense structure films based on 2D materials for application in high volumetric capacitance flexible supercapacitors.