Fractional Gradient Descent RBFNN for Active Fault-Tolerant Control of Plant Protection UAVs

With the increasing prevalence of high-order systems in engineering applications, these systems often exhibitsignificant disturbances and can be challenging to model accurately. As a result, the active disturbance rejectioncontroller (ADRC) has been widely applied in various fields. However, in controlling plant protection unmannedaerial vehicles (UAVs), which are typically large and subject to significant disturbances, load disturbances andthe possibility of multiple actuator faults during pesticide spraying pose significant challenges. To address theseissues, this paper proposes a novel fault-tolerant control method that combines a radial basis function neuralnetwork (RBFNN) with a second-order ADRC and leverages a fractional gradient descent (FGD) algorithm.We integrate the plant protection UAV model’s uncertain parameters, load disturbance parameters, and actuatorfault parameters and utilize the RBFNN for system parameter identification. The resulting ADRC exhibits loaddisturbance suppression and fault tolerance capabilities, and our proposed active fault-tolerant control law hasLyapunov stability implications. Experimental results obtained using a multi-rotor fault-tolerant test platformdemonstrate that the proposed method outperforms other control strategies regarding load disturbance suppressionand fault-tolerant performance.

Operation Control Method of Relay Protection in Flexible DC Distribution Network Compatible with Distributed Power Supply

A novel operation control method for relay protection in flexible DC distribution networks with distributed power supply is proposed to address the issue of inaccurate fault location during relay protection,leading to poor performance.The method combines a fault-tolerant fault location method based on long-term and short-term memory networks to accurately locate the fault section.Then,an operation control method for relay protection based on adaptive weight and whale optimization algorithm(WOA)is used to construct an objective function considering the shortest relay protection action time and the smallest impulse current.The adaptive weight and WOA are employed to obtain the optimal strategy for relay protection operation control,reducing the action time and impulse current.Experimental results demonstrate the effectiveness of the proposed method in accurately locating faults and improving relay protection performance.The longest operation time is reduced by 4.7023 s,and the maximum impulse current is limited to 0.3 A,effectively controlling the impact of large impulse currents and enhancing control efficiency.

Glucagon-like peptide-1 receptor agonists:Exploring the mechanisms from glycemic control to treatment of multisystemic diseases

This editorial takes a deeper look at the insights provided by Soresi and Giannitrapani,which examined the therapeutic potential of glucagon-like peptide-1 receptor agonists(GLP-1RAs)for metabolic dysfunction-associated fatty liver disease.We provide supplementary insights to their research,highlighting the broader systemic implications of GLP-1RAs,synthesizing the current understanding of their mechanisms and the trajectory of research in this field.GLP-1RAs are revolutionizing the treatment of type 2 diabetes mellitus and beyond.Beyond glycemic control,GLP-1RAs demonstrate cardiovascular and renal protective effects,offering potential in managing diabetic kidney disease alongside renin–angiotensin–aldosterone system inhibitors.Their role in bone metabolism hints at benefits for diabetic osteoporosis,while the neuroprotective properties of GLP-1RAs show promise in Alzheimer's disease treatment by modulating neuronal insulin signaling.Additionally,they improve hormonal and metabolic profiles in polycystic ovary syndrome.This editorial highlights the multifaceted mechanisms of GLP-1RAs,emphasizing the need for ongoing research to fully realize their therapeutic potential across a range of multisystemic diseases.

Privacy Protection Based Access Control Scheme in Cloud-Based Services

With the rapid development of computer technology, cloud-based services have become a hot topic. They not only provide users with convenience, but also bring many security issues, such as data sharing and privacy issue. In this paper, we present an access control system with privilege separation based on privacy protection(PS-ACS). In the PS-ACS scheme, we divide users into private domain(PRD) and public domain(PUD) logically. In PRD, to achieve read access permission and write access permission, we adopt the Key-Aggregate Encryption(KAE) and the Improved Attribute-based Signature(IABS) respectively. In PUD, we construct a new multi-authority ciphertext policy attribute-based encryption(CP-ABE) scheme with efficient decryption to avoid the issues of single point of failure and complicated key distribution, and design an efficient attribute revocation method for it. The analysis and simulation result show that our scheme is feasible and superior to protect users' privacy in cloud-based services.

High-Speed Trains Automatic Operation with Protection Constraints: A Resilient Nonlinear Gain-based Feedback Control Approach

This paper addresses the control design for automatic train operation of high-speed trains with protection constraints.A new resilient nonlinear gain-based feedback control approach is proposed,which is capable of guaranteeing,under some proper non-restrictive initial conditions,the protection constraints control raised by the distance-to-go(moving authority)curve and automatic train protection in practice.A new hyperbolic tangent function-based model is presented to mimic the whole operation process of high-speed trains.The proposed feedback control methods are easily implementable and computationally inexpensive because the presence of only two feedback gains guarantee satisfactory tracking performance and closed-loop stability,no adaptations of unknown parameters,function approximation of unknown nonlinearities,and attenuation of external disturbances in the proposed control strategies.Finally,rigorous proofs and comparative simulation results are given to demonstrate the effectiveness of the proposed approaches.

Architecture Design for Integrated Wide Area Protection and Control Systems

This paper firstly reviews the recent development in power system protection and control, with special attention paid to the wide-area and integrated protection, in order to look into future development of integration of protection and control for smart grids. This paper mainly reports on the development of integrated wide area protection and control for power systems. The concept of integrated wide area protection and control is introduced, in which a hierarchical protection and control system provides the protection and control of wide area or regional power substations/ plants and their associated power network. The system is mainly divided into three levels, the local, the substation/plant and the wide area/regional protection and control. The integrated functions at each level are described in details with an aim to develop an optimal coordination mechanism between the levels. One of the core elements in the system is the synchronised wide area communication network between the substations and the protection and control system, in which latest communication technology is employed. Another important player in the system is the wide area synchronized protection and control information platform, which not only enables the fusion three line of defence for power system protection and control, but also provides a perfect tool for the application of cloud computing to substations and power networks.

Seismic protection of frame structures via semi-active control:modeling and implementation issues

Theoretical and practical issues concerning the multi-faceted task of mitigating the latero-torsional seismic response of a prototypal frame structure with asymmetric mass distribution are approached, Chevron braces with embedded magnetorheological dampers acting on the interstory drift are used to ensure additional energy dissipation. The semi-active control strategy employed to govern the modification of the damper characteristics via feedback is based on the selection of optimal forces according to a H2/LQG criterion, with respect to which the actual forces are regulated by a clipped-optimal logic. A dynamic observer is used to estimate the state through a non-collocated placement of the acceleration sensors. Several aspects to be addressed throughout the complex process including the design, modelization, and implementation phases of semi-active protection systems are discussed. Finally, experimental results obtained to mitigate the motion induced by ground excitation in a large-scale laboratory prototype, simulating the seismic response of a two-story building, are summarized.

Protection and Quality Control of Wild Chinese Herbal Medicine Resources in Nature Reserves by Taking Longyuwan Scenic Spot Within Funiu Mountain Nature Reserve as an Example

This paper discussed how to protect and control the quality of wild Chinese herbal medicine resources in nature reserves by taking Longyuwan National Forest Park within Funiu Mountain Nature Reserve as an example. Through the combination of three methods including literature review, visiting and investigational studies, and field surveys, the data of investigation, collection and collation were analyzed. According to data of surveys, collection and collation, problems related to the protection of wild Chinese herbal medicine resources faced by Longyuwan Scenic Spot within Funiu Mountain Nature Reserve were also analyzed and protection strategies and quality control of wild Chinese herbal medicine resources in this nature reserve were discussed. It was expected that the results would provide important scientific references for the sustainable development, protection and quality control of wild Chinese herbal medicine resources within nature reserves.

Immobilization of antibodies on the self-assembled monolayer by antigen-binding site protection and immobilization kinetic control

The orientation of the biological molecule immobi-lized on a solid surface has been critical in devel-opment of various applications. In this study, ori-entation of antibody was retained by protecting the antigen-binding site of the antibody prior to immo-bilization to -functionalized mixed self-assembled monolayer (SAM) of 12-mercaptododecanoic acid and 1-heptanethiol. More importantly, the number of immobilization bonds formed between each an-tigen-binding site protected antibody molecule and the solid surface was controlled by optimizing the mole fraction of the activated carboxyl group of the linker molecules in the mixed SAM. The amount of antibody used in this study was approximately equivalent to the amount for one monolayer surface coverage. The resulting activity of protected immo-bilized antibody was about 10 fold higher than that of random immobilized

Study on DeviceNet communication mechanism and its application in protection measurement and control system

To fit in with the developing requirement of int and communication of protective relays, a protection egrated functions of protection measurement, control measurement and control system based on DeviceNet fieldbus is designed. The communication mechanism of DeviceNet is studied and data trigger modes, communication connection, message types and other key technologies are analyzed. The object modeling and device description of the device are realized too. Results of network test, dynamic simulation and test in the field indicate that this system can accomplish all the communication tasks in real time and can make precise response to every kind of faults of the motor, transformer, line and capacitor. Moreover, this system has higher measurement precision and better control capability.

Research on Technology of Electromagnetic Protection for the Generator Control System

Generator control system decides whether the generator can work as usual or not, as well as its stability of performance. Both types of generators control system composed of the transistor and DSP are sensitive to outward electromagnetic interference, directly related to the generator performance. In this text, we first analyze the electromagnetic interference threat generator control system of transistor type may face, then design a electromagnetic protection plan for the intake, the panel and the sense organ. This work is of great significance in improving its electromagnetic protection ability and stability of performance.

Regional Coordinated Development and Joint Prevention and Control for Environmental Protection in China in the New Era

The three important historical development stages of China from"standing up","getting rich"to"becoming strong"were analyzed deeply.Regional coordinated development policies and strategies have also gone through the"enlightenment stage","development stage"and"mature stage".On this basis,the problems of the coordination of China s regional coordinated development and joint prevention and control for environmental protection in the new era,as well as suggestions for the next step were further analyzed.

The Application of Three-Dimensional Integrated Protection Technology in High Slope Control of Mountainous Highway

In the process of China's national economy construction,the role of highway traffic is unquestionable.And with the continuous development of society and the continuous improvement of highway grade,the work of the highway slope governance become a top priority,especially for some mountainous area highway,strengthen management of slope is very critical.The emergence of three-dimensional comprehensive protection technology has created great convenience for the management of the slope of the mountainous highway,and the safety of the mountain highway has been improved effectively.In view of this,the paper focuses on the application of three-dimensional integrated protection technology in the treatment of highway high slope in mountainous areas for reference and reference.

Advancement in Wide Area Monitoring Protection and Control Using PMU’s Model in MATLAB/SIMULINK

A big step forward to improve power system monitoring and performance, continued load growth without a corresponding increase in transmission resources has resulted in reduced operational margins for many power systems worldwide and has led to operation of power systems closer to their stability limits and to power exchange in new patterns. These issues, as well as the on-going worldwide trend towards deregulation of the entire industry on the one hand and the increased need for accurate and better network monitoring on the other hand, force power utilities exposed to this pressure to demand new solutions for wide area monitoring, protection and control. Wide-area monitoring, protection, and control require communicating the specific-node information to a remote station but all information should be time synchronized so that to neutralize the time difference between information. It gives a complete simultaneous snap shot of the power system. The conventional system is not able to satisfy the time-synchronized requirement of power system. Phasor Measurement Unit (PMU) is enabler of time-synchronized measurement, it communicate the synchronized local information to remote station.

Disturbance Observer-Based Safe Tracking Control for Unmanned Helicopters With Partial State Constraints and Disturbances

In this paper, a disturbance observer-based safe tracking control scheme is proposed for a medium-scale unmanned helicopter with rotor flapping dynamics in the presence of partial state constraints and unknown external disturbances. A safety protection algorithm is proposed to keep the constrained states within the given safe-set. A second-order disturbance observer technique is utilized to estimate the external disturbances. It is shown that the desired tracking performance of the controlled unmanned helicopter can be achieved with the application of the backstepping approach, dynamic surface control technique, and Lyapunov method. Finally, the availability of the proposed control scheme has been shown by simulation results.

An Intelligent Approach for Intrusion Detection in Industrial Control System

Supervisory control and data acquisition(SCADA)systems are computer systems that gather and analyze real-time data,distributed control systems are specially designed automated control system that consists of geographically distributed control elements,and other smaller control systems such as programmable logic controllers are industrial solid-state computers that monitor inputs and outputs and make logic-based decisions.In recent years,there has been a lot of focus on the security of industrial control systems.Due to the advancement in information technologies,the risk of cyberattacks on industrial control system has been drastically increased.Because they are so inextricably tied to human life,any damage to them might have devastating consequences.To provide an efficient solution to such problems,this paper proposes a new approach to intrusion detection.First,the important features in the dataset are determined by the difference between the distribution of unlabeled and positive data which is deployed for the learning process.Then,a prior estimation of the class is proposed based on a support vector machine.Simulation results show that the proposed approach has better anomaly detection performance than existing algorithms.

Performance Analysis of a Profile Control Agent for Waste Drilling Fluid Treatment

A method for the treatment of hazardous waste drilling fluids,potentially leading to environmental pollution,is considered.The waste drilling fluid is treated with an inorganic flocculant,an organic flocculant,and a pH regulator.The profile control agent consists of partially hydrolyzed polyacrylamide,formaldehyde,hexamethylenetetramine,resorcinol,phenol,and the treated waste drilling fluid itself.For a waste drilling fluid concentration of 2500 mg/L,the gelling time of the profile control agent is 25 h,and the gelling strength is 32,000 mPa.s.Compared with the profile control agent prepared by recirculated water under the same conditions,the present profile control agent displays better stability,salt-resistance,and performance.

基于控保协同的有源配网主动注入式保护方法

由于逆变型分布式电源(inverter-interfaced distributed generation,IIDG)的故障特性主要由其控制策略及电网故障情况决定,在不同故障场景和工况下,传统的被动式保护方法存在保护整定和协调困难的问题。为此,提出一种基于控保协同的有源配网主动注入式保护方法,故障期间控制IIDG主动向电网注入特征信号,保护处利用检测到的特征信号来获取IIDG的基波信息,从而消除IIDG对各支路电流及现有电流保护的影响。由于保护利用的故障特征是由IIDG主动注入的,因此该方法在不同场景和工况下都有较好的适用性,且不需要增加额外的通信和检测设备,具有经济性好和实用性高的优点。仿真结果验证了所提方法的有效性。

基于等效序阻抗差异特征的低频输电线路差动保护优化方案

低频输电线路故障时,两侧短路电流均由模块化多电平矩阵变换器提供,两侧短路电流相角均受控且幅值相当,导致差动保护灵敏度严重下降。分析了低频输电系统定电压控制侧和功率控制侧的等效正、负序阻抗特征,指出因控制策略不同,系统故障时两侧等效正、负序阻抗特征存在明显差异。分析了低频输电线路区内和区外故障两侧保护装置测量到的等效序阻抗之间的差异性和相似性,基于此特征构建了两侧等效序阻抗差异指标,提出了基于等效序阻抗差异指标的差动保护制动系数优化方法。仿真结果表明,所提方案能够显著提升低频输电线路区内故障时差动保护的动作速度和动作灵敏性。