Analysis of debris flow control effect and hazard assessment in Xinqiao Gully,Wenchuan M_(s)8.0 earthquake area based on numerical simulation

Xinqiao Gully is located in the area of the 2008 Wenchuan M_(s)8.0 earthquake in Sichuan province,China.Based on the investigation of the 2023"6-26"Xinqiao Gully debris flow event,this study assessed the effectiveness of the debris flow control project and evaluated the debris flow hazards.Through field investigation and numerical simulation methods,the indicators of flow intensity reduction rate and storage capacity fullness were proposed to quantify the effectiveness of the engineering measures in the debris flow event.The simulation results show that the debris flow control project reduced the flow intensity by41.05%to 64.61%.The storage capacity of the dam decreases gradually from upstream to the mouth of the gully,thus effectively intercepting and controlling the debris flow.By evaluating the debris flow of different recurrence intervals,further measures are recommended for managing debris flow events.

Multi-Time Scale Operation and Simulation Strategy of the Park Based on Model Predictive Control

Due to the impact of source-load prediction power errors and uncertainties,the actual operation of the park will have a wide range of fluctuations compared with the expected state,resulting in its inability to achieve the expected economy.This paper constructs an operating simulation model of the park power grid operation considering demand response and proposes a multi-time scale operating simulation method that combines day-ahead optimization and model predictive control(MPC).In the day-ahead stage,an operating simulation plan that comprehensively considers the user’s side comfort and operating costs is proposed with a long-term time scale of 15 min.In order to cope with power fluctuations of photovoltaic,wind turbine and conventional load,MPC is used to track and roll correct the day-ahead operating simulation plan in the intra-day stage to meet the actual operating operation status of the park.Finally,the validity and economy of the operating simulation strategy are verified through the analysis of arithmetic examples.

Chemical simulation teaching system based on virtual reality and gesture interaction

Background Most existing chemical experiment teaching systems lack solid immersive experiences,making it difficult to engage students.To address these challenges,we propose a chemical simulation teaching system based on virtual reality and gesture interaction.Methods The parameters of the models were obtained through actual investigation,whereby Blender and 3DS MAX were used to model and import these parameters into a physics engine.By establishing an interface for the physics engine,gesture interaction hardware,and virtual reality(VR)helmet,a highly realistic chemical experiment environment was created.Using code script logic,particle systems,as well as other systems,chemical phenomena were simulated.Furthermore,we created an online teaching platform using streaming media and databases to address the problems of distance teaching.Results The proposed system was evaluated against two mainstream products in the market.In the experiments,the proposed system outperformed the other products in terms of fidelity and practicality.Conclusions The proposed system which offers realistic simulations and practicability,can help improve the high school chemistry experimental education.

X-In-the-Loop Methodology and Simulation Platform For Controller Development of Gravity-1

The Gravity-1(YL-1) launch vehicle has been extensively optimized in terms of its overall layout which in turn has increased the functional and performance demands on the control system. To thoroughly validate and verify the control system, the X-In-the-Loop simulation methodology was implemented from the verification of the YL-1's concept phase. Throughout the entire development cycle, from the initial concept demonstration to the flight test,simulations under sevral modes including Model-in-the-Loop(MiL), Software-in-the-Loop(SiL) and Hardware-in-theLoop(HiL) were executed following the V-V process which ensuring the correctness and robustness of the control system. Specifically, MiL simulation are primarily used to verify the accuracy and robustness of the control strategies and parameters. SiL simulation focused on verifying the correctness of the code implementation. Whereas HiL testing mainly checked the operational correctness of the flight control hardware, the compatibility of flight control software within the flight control computer and the correctness of hardware I/O. In addition to these, further semi-physical simulations were possible on the HiL platform by replacing models of controlled objects with real devices such as IMUs and TVC actuators. And realistic flight conditions were replicated through turntables, TVC actuator loading tables etc.to achieve a more comprehensive validation and verification of the control system.

Java Language for Numerical Control Simulation System Research

Java language is widely used in a variety of development platforms to develop all kinds of application software for its simple and efficient.The programming language owning platform independent is adopted to solve the image flicker,sound loading and other issues by the threading technology,multimedia technology,graphics and point by point comparison techniques.Dynamic real⁃time process simulation is implemented and a two⁃dimensional network of CNC machining simulation system is developed while Java applet application is as a carrier.The simulation results show that the system has a friendly interface and fast calculation speed,and platform portability has a certain practicality and application value.

Design and Simulation of Controller for Hyper Velocity Kinetic Energy Missile

The controller design and digital simulation for the hyper velocity kinetic energy missile is investigated. A mathematical model of the trajectory deviation from the line of sight was established, the guidance closed loop was compensated with a phase advance lag corrective network, a selecting algorithm of the attitude control motors used to steer the missile's attitude was presented. In the presence of a wide variety of disturbances the results of digital simulation are satisfactory to circular error probability(CEP) being less than 0 5?m. The steering scheme utilizing attitude control motors as actuators to control the attitude of the missile is feasible.

Simulation Research on Structure Changing Control over the Follow Up System of the Smart Mine

By analyzing the target's motion pattern, in terms of the requirement for the performance indexes of the follow up system, the structure changing control and time optimal theory is proposed. The system's control scheme from three different aspects(the dynamic response simulation, compound control simulation and dynamic tracking simulation) is also studied. And all the results proved the feasibility of the synthetical utilization of the open loop control, speed decreased control and position closed loop control.

基于CarSim/Simulink的计算机控制系统综合实验设计

针对计算机控制系统课程中控制算法设计与仿真实现,设计了基于CarSim/Simulink的控制综合实验方案。以4轮独立驱动小车为对象,要求学生熟悉其基本工作原理,并在非线性动力学模型基础上,进行局部线性近似,设计反馈控制器,模拟小车控制。使用CarSim仿真软件可直观地模拟调整4轮独立驱动小车的质量、质心位置和转动惯量等,实现个性化选择,搭建车辆模型;与Simulink接口互通,在Simulink中完成控制算法。实验设计旨在使学生夯实计算机控制系统的理论基础,并逐步过渡到控制工程,理论联系实际,培养其解决复杂工程问题的能力。

电动汽车电控液压制动系统CarSim/Simulink联合仿真研究

针对某款国产电动汽车的电控液压制动系统,文章基于滑移率的比例-积分-微分(PID)控制提出了防抱死制动系统(ABS)模型,以改善车辆制动性能,提高在对开路面上的制动有效性和安全性。首先,使用Simulink软件建立液压电控制动系统的动力学模型;然后,基于滑移率设计PID控制器,并通过1/4车辆模型验证其有效性;最后,利用S函数将ABS控制器的Simulink模型输入CarSim平台中,开展CarSim/Simulink双平台联合控制仿真。结果表明,基于滑移率的PID控制的ABS对比无ABS的车辆,制动性能更加优越,在对开路面上制动稳定性更加明显。

Study on Intelligent Control and 3D Real-time Distributed Animation Simulation for Super-maneuver Attack of the New Generation Fighter

The super-maneuver flight performance has a very high tactical value, and the development of this tactical value has great significance. A discussion is devoted to the study of intelligent control methods and technologies of real-time distributed 3-dimensional animation simulation for the super-maneuverable attack of new generational fighter in this paper. A flight control system of super-maneuver is reconstructed by adopting three layers BP neural networks of number 3, and the fire/flight coupler is designed by introducing a fuzzy control rule whose universe of discourse and gain are regulated adaptively on the line. Furthermore, a new method of real-time distributed 3-dimensional animation simulation is put forward, and a real-time distributed 3-dimensional animation simulation tool platform is constructed in this paper. The simulation result is lifelike, perceivable directly and useful.

Control performance comparison between tuned liquid damper and tuned liquid column damper using real-time hybrid simulation

Tuned liquid damper (TLD) and tuned liquid column damper (TLCD) are two types of passive control devices that are widely used in structural control. In this study, a real-time hybrid simulation (RTHS) technique is employed to investigate the diff erence in control performance between TLD and TLCD. A series of RTHSs is presented with the premise of the same liquid length, mass ratio, and structural parameters. Herein, TLD and TLCD are physically experimented, and controlled structures are numerically simulated. Then, parametric studies are performed to further evaluate the diff erent performance between TLD and TLCD. Experimental results demonstrate that TLD is more eff ective than TLCD under diff erent amplitude excitations.

Virtual Simulation System with Path-following Control for Lunar Rovers Moving on Rough Terrain

Virtual simulation technology is of great importance for the teleoperation of lunar rovers during the exploration phase, as well as the design of locomotion systems, performance evaluation, and control strategy verification during the R&D phase. The currently used simulation methods for lunar rovers have several disadvantages such as poor fidelity for wheel-soil interaction mechanics, difficulty in simulating rough terrains, and high complexity making it difficult to realize mobility control in simulation systems. This paper presents an approach for the construction of a virtual simulation system that integrates the features of 3D modeling, wheel-soil interaction mechanics, dynamics analysis, mobility control, and visualization for lunar rovers. Wheel-soil interaction experiments are carried out to test the forces and moments acted on a lunar rover’s wheel by the soil with a vertical load of 80 N and slip ratios of 0, 0.03, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.6. The experimental results are referenced in order to set the parameters’ values for the PAC2002 tire model of the ADAMS/Tire module. In addition, the rough lunar terrain is simulated with 3DS Max software after analyzing its characteristics, and a data-transfer program is developed with Matlab to simulate the 3D reappearance of a lunar environment in ADAMS. The 3D model of a lunar rover is developed by using Pro/E software and is then imported into ADAMS. Finally, a virtual simulation system for lunar rovers is developed. A path-following control strategy based on slip compensation for a six-wheeled lunar rover prototype is researched. The controller is implemented by using Matlab/Simulink to carry out joint simulations with ADAMS. The designed virtual lunar rover could follow the planned path on a rough terrain. This paper can also provide a reference scheme for virtual simulation and performance analysis of rovers moving on rough lunar terrains.

Optimal Design and Force Control of a Nine-Cable-Driven Parallel Mechanism for Lunar Takeoff Simulation

Traditional simulation methods are unable to meet the requirements of lunar takeo simulations, such as high force output precision, low cost, and repeated use. Considering that cable-driven parallel mechanisms have the advantages of high payload to weight ratio, potentially large workspace, and high-speed motion, these mechanisms have the potential to be used for lunar takeo simulations. Thus, this paper presents a parallel mechanism driven by nine cables. The purpose of this study is to optimize the dimensions of the cable-driven parallel mechanism to meet dynamic workspace requirements under cable tension constraints. The dynamic workspace requirements are derived from the kinematical function requests of the lunar takeo simulation equipment. Experimental design and response surface methods are adopted for building the surrogate mathematical model linking the optimal variables and the optimization indices. A set of dimensional parameters are determined by analyzing the surrogate mathematical model. The volume of the dynamic workspace increased by 46% after optimization. Besides, a force control method is proposed for calculating output vector and sinusoidal forces. A force control loop is introduced into the traditional position control loop to adjust the cable force precisely, while controlling the cable length. The e ectiveness of the proposed control method is verified through experiments. A 5% vector output accuracy and 12 Hz undulation force output can be realized. This paper proposes a cable-driven parallel mechanism which can be used for lunar takeo simulation.

Dynamic Simulation of the Aircraft Environmental Control System

The dynamic research of aircraft environmental control system (ECS) is an important step in the advanced ECS design process. Based on the thermodynamics theory, mathematical models for the dynamic performance simulating of aircraft ECS were set up and an ECS simulation toolbox (ECS_1.0) was created with MATLAB language. It consists of main component modules (ducts, valves, heat exchangers, compressor, turbine, etc.). An aircraft environmental control system computer model was developed to assist engineers with the design and development of ECS dynamic optimization. An example simulating an existing ECS was given which shows the satisfactory effects.

Simulation and control strategy for the variational influent of WWTP

With the development of activated sludge model, the simulation software for the design and operation of wastewater treatment plant （WWTP） was produced and has been widely used. The dynamic change of the quality and flow of influent are major factors causing the unstable operation of wastewater treatment process. As a basic model, ASMI model was used for the simulation of activated sludge process, and double exponential model was selected for the simulation of secondary sedimentation tank. The influences of influent change to the aeration tank and secondary sedimentation tank were investigated, and the relationship among influent change, the quality of effluent and the level of sludge blanket in secondary sedimentation tank was established. On the basis of the simulation results, the operation of the WWTP could be adjusted under the dynamic change of the influent. Furthermore, the controlling strategy combined the feed-forward on the influent flow and the feedback on the level of sludge blanket in the secondary sedimentation tank was studied.

Simulation of type selection for 6-high cold tandem mill based on shape control ability

A theoretical method for selecting strip rolling mill type that considered shape control ability was established using the figure alteration range that was worked by the alteration track of vector expressing strip's cross section (crown) to express the shape control ability of rolling mill. With the mathematical models and simulation software that were developed by the authors' own models, four types of mills were aimed, including HCM (6-high middle rolls shift type HC (high crown) -mill), HCMW (6-high middle rolls and work rolls shift type HC-mill), UCM (6-high middle rolls shift type HC-mill with middle roll bender) and UCMW (6-high middle rolls and work rolls shift type HC-mill with middle roll bender), and the shape and crown control ability of every mill type was analyzed and compared. An appropriate arrangement mode of tandem mill was brought forward. The results show that UCMW mill is a perfect choice for controlling shape and crown, and the area of control characteristics curve of UCMW (or UCM) is twice than that of HCM, but UCM mill is also a good choice for its simple frame. In other word, the shape and crown controlling ability of UCMW mill is better than that of UCM mill, but the frame of UCM mill is simpler than that of UCMW mill. As for the final type of mill, should be synthetically decided by thinking over fund and equipment technology.

COMPUTER SIMULATION OF NEURAL NETWORK CONTROL SYSTEM FOR CO_2 WELDING PROCESS

In this paper, neural network control systems for decreasing the spatter of CO2 welding have been created. The Generalized inverse Learning Architecture(GILA), the SPecialized inverse Learning Architecture(SILA)-I & H and the Error Back Propagating Model(EBPM) are adopted respectively to simulate the static and dynamic welding control processes. The results of simulation and experiment show that the SILA-I and EBPM have betted properties. The factors affecting the simulating results and the dynamic response quality have also been analyzed.

Simulation and Experiment Research on the Proportional Pressure Control of Water-assisted Injection Molding

Water-assisted injection molding（WAIM）,a newly developed fluid-assisted injection molding technology has drawn more and more attentions for the energy saving,short cooling circle time and high quality of products.Existing research for the process of WAIM has shown that the pressure control of the injecting water is mostly important for the WAIM.However,the proportional pressure control for the WAIM system is quite complex due to the existence of nonlinearities in the water hydraulic system.In order to achieve better pressure control performance of the injecting water to meet the requirements of the WAIM,the proportional pressure control of the WAIM system is investigated both numerically and experimentally.A newly designed water hydraulic system for WAIM is first modeled in AMEsim environment,the load characteristics and the nonlinearities of water hydraulic system are both considered,then the main factors affecting the injecting pressure and load flow rate are extensively studied.Meanwhile,an open-loop model-based compensation control strategy is employed to regulate the water injection pressure and a feedback proportional integrator controller is further adopted to achieve better control performance.In order to verify the AMEsim simulation results WAIM experiment for particular Acrylonitrile Butadiene Styrene（ABS） parts is implemented and the measured experimental data including injecting pressure and flow rate results are compared with the simulation.The good coincidence between experiment and simulation shows that the AMEsim model is accurate,and the tracking performance of the load pressure indicates that the proposed control strategy is effective for the proportional pressure control of the nonlinear WAIM system.The proposed proportional pressure control strategy and the conclusions drawn from simulation and experiment contribute to the application of water hydraulic proportional control and WAIM technology.

Robust Modeling, Sliding-Mode Controller, and Simulation of an Underactuated ROV Under Parametric Uncertainties and Disturbances

A dynamic model of a remotely operated vehicle(ROV)is developed.The hydrodynamic damping coefficients are estimated using a semi-predictive approach and computational fluid dynamic software ANSYS-CFX?and WAMIT?.A sliding-mode controller(SMC)is then designed for the ROV model.The controller is subsequently robustified against modeling uncertainties,disturbances,and measurement errors.It is shown that when the system is subjected to bounded uncertainties,the SMC will preserve stability and tracking response.The paper ends with simulation results for a variety of conditions such as disturbances and parametric uncertainties.

Mathematical model for the thermal process of controlled cooling of wires and its numerical simulation

The mathematical model for the thermal process of billets rolling has beenestablished, including transporting in air and temperature-holding cover, descaling withhigh-pressure water, and the process of rolling and cooling in water box. The calculated data by themodel have been compared with the measured data and the results show that the model is right andcreditable. Based on the model, the main thermal characters of rolling line have been simulated andthe influence of all the parameters on the temperature of rolling has been analyzed.