CAutoCSD-Evolutionary Search and Optimisation Enabled Computer Automated Control System Design

This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of “computer-aided control system design” (CACSD) to novel “computer-automated control system design” (CAutoCSD). The first step towards this goal is to accommodate, under practical constraints, various design objectives that are desirable in both time and frequency domains. Such performance-prioritised unification is aimed at relieving practising engineers from having to select a particular control scheme and from sacrificing certain performance goals resulting from pre-commitment to such schemes. With recent progress in evolutionary computing based extra-numeric, multi-criterion search and optimisation techniques, such unification of LTI control schemes becomes feasible, analytical and practical, and the resultant designs can be creative. The techniques developed are applied to, and illustrated by, three design problems. The unified approach automatically provides an integrator for zero-steady state error in velocity control of a DC motor, and meets multiple objectives in the design of an LTI controller for a non-minimum phase plant and offers a high-performance LTI controller network for a non-linear chemical process.

Control system design of hybrid fuel cell city bus

This paper introduced the design of the hybrid powertrain of the Fuel Cell City Bus demonstrated in 2008 Beijing Olympic Games. The configuration of the hybrid fuel cell powertrain was introduced. The safety of hydrogen storage and delivery system, the hydrogen leakage alarm system were developed. The real-time distributed control and diagnosis system based on the Time Trigger Controller Area Network （TTCAN） with 10 ms basic control period was developed. The concept and implementation of processor （or controller） monitor and process （or task） monitor technique based on the TYCAN were applied in this paper. The fault tolerant control algorithm of the fuel cell engine and the battery man- agement system were considered. The demonstration experience verified that the fault tolerant control was very important for the fuel cell city bus.

Control System Design and Validation for Visual Based Indoor Inspection Helicopter

This paper is on control system design for visual based indoor inspection by the model helicopters. For the indoor inspection system for large structures, there are some cases where it is difficult for htunans to work with. This paper introduces indoor inspection helicopter system with only inspection camera and prism for position sensing as payload. The control system is designed to help the operator of the inspection system to control the helicopter to designated position without much practice. The cases of the control by experienced and novice operators are compared and results show that the system has feasibility for indoor inspection system to be used by any kind of users.

Discrete Event Net Based Modeling and Control System Design for Real-Time Concurrent Control of Multiple Robot Systems

This paper deals with control system design and implementation problems encountered in multiple robot systems. The methodology developed is depicted by a set of coordination mechanisms using hierarchical net structures and their accompanying rules. With the net models, the hierarchical and distributed control system is designed for an assembly task. Synchronization commands allow coordination of the movements of the robots. The net models make concurrency of the movements of the robots transparent to users. The net based machine controller executes robot motion control through the communication with the external robot controller using the command/response concept. Sensory signals indicating the change of state of robots are used to trigger or initiate tasks. Simultaneous movement of the robots is obtained by creating different background threads running in parallel under Windows OS. The multilevel hierarchical control system can be consistently constructed using net models.

Proto col Design for Output Consensus of Port-controlled Hamiltonian Multi-agent Systems

这份报纸调查控制港口的 Hamiltonian (PCH ) 多代理人系统的产量一致问题与修理并且切换的拓扑学。第一，一个分布式的组产量一致协议经由塑造方法全球性到达稳定性和组产量一致的能量被设计。第二，一个新分布式的控制协议被使用 PCH 系统的结构的性质建议。这个协议的优点是它能由构造一种虚拟邻居转变指导的图到未受指导的图。第三，一个控制协议被设计，扩大 LaSalle0s 不变性原则在联合连接的拓扑学条件下面为交换系统发展了让所有代理人当拓扑学正在切换时，到达输出一致。最后，有模拟的一些解说性的例子被提供表明在这份报纸设计的协议的有效性。

Parameterized design of nonlinear feedback controllers for servo positioning systems

To achieve fast, smooth and accurate set point tracking in servo positioning systems, a parameterized design of nonlinear feedback controllers is presented, based on a so-called composite nonlinear feedback （CNF） control technique. The controller designed here consists of a linear feedback part and a nonlinear part. The linear part is responsible for stability and fast response of the closed-loop system. The nonlinear part serves to increase the damping ratio of closed-loop poles as the controlled output approaches the target reference. The CNF control brings together the good points of both the small and the large damping ratio cases, by continuously scheduling the damping ratio of the dominant closed-loop poles and thus has the capability for superior transient performance, i.e. a fast output response with low overshoot. In the presence of constant disturbances, an integral action is included so as to remove the static bias. An explicitly parameterized controller is derived for servo positioning systems characterized by second-order model. Practical application in a micro hard disk drive servo system is then presented, together with some discussion of the rationale and characteristics of such design. Simulation and experimental results demonstrate the effectiveness of this control design methodology.

Angular Position Controller and Its Design Model Verification for the Electro-Hydraulic Servo Control System

The angular position controller is system （EHSAS） to control the output of the rotary applied to electro-hydraulic servo actuator actuator. It works as a compensator based on the frequency response of the EHSAS. Its design model is verified on the state-space model of EHSAS by using simulation program SIMULINK. Real data used to test the system. Simulation results give a good agreement for the controller and also for the state-space model.

Design and realization of the automatic control system for the bell anneal furnace production

In accordance with the technical requirements of the full hydrogen bell anneal furnace(BAF)used for the annealing of stainless steel coils in the Baosteel Stainless Steel Business Unit,the design concept for the automatic control system was introduced in the paper.The major points described concerned the infrastructure of computers and networks,system interfaces,control functions,etc.The process control system of the full hydrogen BAF(L2)was the topic and its seven main functions were introduced.The expected output was achieved and manufacturing efficiency was enhanced within three months after the BAF units were put into operation,which demonstrated that the design concept of the automatic control system introduced in the paper was correct and that its functionalities were effective.

Intelligent Design and Implementation of Missile Fire Control System

Missile fire control system is the core of ship-based missile weapon system, whose safeguard level has direct relation with the attack ability of naval vessels. After a long period of deep investigation and research, it was found that, in one missile fire control system, there are such problems as single safeguard system, low ratio of cost to efficiency, etc. By adopting intelligent control techniques and many measures to multiple securities, the new type of assistant system is designed, some difficult problems are solved, such as fixed project channel and unitary means of missiles, which can make the equipment carry out combat mission reliably and continuously.

Controller design of uncertain nonlinear systems based on T-S fuzzy model

A robust control for uncertain nonlinear systems based on T-S fuzzy model is discussed in this paper. First, a T-S fuzzy system is adopted to model the uncertain nonlinear systems. Then, for the system with input variables adopting standard fuzzy partitions, the efficient maximal overlapped-rules group （EMORG） is presented, and a new sufficient condition to check the stability of T-S fuzzy system with uncertainty is derived, which is expressed in terms of Linear Matrix Inequalities. The derived stability condition, which only requires a local common positive definite matrix in each EMORG, can reduce the conservatism and difficulty in existing stability conditions. Finally, a simulation example shows the proposed approach is effective.

Robust H_∞ Controller Design for Uncertain Neutral Systems via Dynamic Observer Based Output Feedback

In this paper, the dynamic observer-based controller design for a class of neutral systems with H∞ control is considered. An observer-based output feedback is derived for systems with polytopic parameter uncertainties. This controller assures delay-dependent stabilization and H∞ norm bound attenuation from the disturbance input to the controlled output. Numerical examples are provided for illustration and comparison of the proposed conditions.

H-Infinite Controller Design of Singular Networked Control Systems

This paper investigates the H∞ controller design method for a class of singular networked control systems (SNCS) based on the singular plant. In view of the network-induced delay less than or equal to a sampling period, finite external disturbance, clock-driven sensors, event-driven controller and actuators as well as impulse behavior and structural instability of singular plants, the H∞ controller design method of SNCS with state feed- back way and dynamic output feedback way is investigated respectively by means of the linear matrix inequality method. The existence condition of H∞ control law, the solving approaches of H∞ controller parameters and disturbance attenuation degree are presented. Finally, a simulation example is given to illustrate the effectiveness and feasibility of the presented method.

Frequency Response Design Method for PDFSV Control of Electrohydraulic Servo Systems

The frequency response design method for PDFSV (Pseudo Derivative Feedback Subvariable) control of electrohydraulic servo system is introduced. Theoretical analysis and computer simulation show that PDFSV control is a high robust system, and a very good performance can be obtained when this theory is employed in electrohydraulic servo system.

Design of flying vehicle control system by signal to noise ratio

Presents the new concept of ″Desired to be small″ based on the basic function of vehicle flight control system for an optimal design of flying vehicle control system, and the definition of S/N ratio and calculation formula for ″Desired to be small″ dynamic characteristics, and the S/N ratio method established for design of velicle flight control systems, by which, an orthogrnal table is used to arrange test schemes, and error facters are used to simulate various interferences, and the use of S/N ratio as a design criterion to synthesise the design of dynamic and static characteristics for definition of an optimal scheme, the application of S/N ratio method to the design of a type of vehicle control system and the single run success abtained in design of control system, technical evaluation test and design finalization flight test.

Design of control sequence of pulses for the population transfer of high dimensional spin 1/2 quantum systems

On the basis of the relationship between the Hamiltonian of spin 1/2 quantum system under control and the energy level structure and transitions, a radio frequency pulse sequence is designed using intuitive and half counter-intuitive sequences of pulse to transfer the population of the 3-qubit system coherently. The effectiveness of the designed control sequence is verified through the system simulation experiment of the evolution of state. In principle, the design method of the control pulse sequence proposed can be generalized to use in the quantum systems of higher dimension.

Book Announcement of L. Celentano, Robust Tracking Controllers Design with Generic References for Continuous and Discrete Uncertain Linear SISO Systems, LAP LAMBERT Academic Publishing, 2012

In this book new results on controller design techniques for the tracking of generic reference inputs are presented. They allow the design of a controller for an uncertain process, either continuous or discrete-time, without zeros, and with measurable state. The controller guarantees that the control system is Type 1 and has the desired constant gain and poles or that the control system tracks, with a specified maximum error and with a specified maximum time constant, a generic reference with bounded derivative (variation in the discrete-time case), also in the presence of a generic disturbance with bounded derivative (variation). In addition, it is considered the case in which the reference is known a priori. The utility and the efficiency of the proposed methods are illustrated with attractive and significant examples of motion control and temperature control. This book is useful for the design of control systems, especially for manufacturing systems, that are versatile, fast, precise and robust.

On the Design of Optimal Feedback Control for Systems of Second Order

A difficult but important problem in optimal control theory is the design of an optimal feedback control, i.e., the design of an optimal control as function of the phase (state) coordinates [1,2]. This problem can be solved not often. We study here the autonomous nonlinear system of second order in general form. The constraints imposed on the control input can depend on the phase (state) coordinates of the system. The goal of the control is to maximize or minimize one phase coordinate of the considered system while other takes a prescribed in advance value. In the literature, optimal control problems for the systems of second order are most frequently associated with driving both phase coordinates to a prescribed in advance state. In this statement of the problem, the optimal control feedback can be designed only for special kind of systems. In our statement of the problem, an optimal control can be designed as function of the state coordinates for more general kind of the systems. The problem of maximization or minimization of the swing amplitude is considered explicitly as an example. Simulation results are presented.

Research on Self-balancing Two Wheels Mobile Robot Control System Analysis

The paper presents the research on self-balancing two-wheels mobile robot control system analysis with experimental studies.The research problem in this work is to stabilize the mobile robot with self-control and to carry the sensitive things without failing in a long span period.The main objective of this study is to focus on the mathematical modelling of mobile robot from laboratory scale to real world applications.The numerical expression with mathematical modelling is very important to control the mobile robot system with linearization.The fundamental concepts of dynamic system stability were utilized for maintaining the stability of the constructed mobile robot system.The controller design is also important for checking the stability and the appropriate controller design is proportional,integral,and derivative-PID controller and Linear Quadratic Regulator(LQR).The steady state error could be reduced by using such kind of PID controller.The simulation of numerical expression on mathematical modeling was conducted in MATLAB environments.The confirmation results from the simulation techniques were applied to construct the hardware design of mobile robot system for practical study.The results from simulation approaches and experimental approaches are matched in various kinds of analyses.The constructed mobile robot system was designed and analyzed in the control system design laboratory of Yangon Technological University(YTU).