Influence of key factors on deflection of bonded prestressed concrete simply supported slabs subjected to fire

In order to validate the accuracy of nonlinear fire simulation programs,comparison analysis is carried out between simulation and experiment induced from small-scale specimens,and then fire resistance of large-scale prestressed concrete slabs is further investigated through parameter expansion.The influences on fire resistance ratings controlled by deflection are explored and discussed,including effective span,concrete cover thickness,load level,prestress degree,effective prestress,composite reinforcement index and other factors.The calculated results indicate that fire resistance ratings of large-scale bonded prestressed concrete simply supported slabs are bigger than those of small-scale ones.Finally,the calculation formulas of fire resistance ratings controlled by deflection are established,which rationally consider the influence of effective span,concrete cover thickness,load level,composite reinforcement index and so on key factors.

Numerical Simulation of Wake Deflection Control around NACA0012 Airfoil Using Active Morphing Flaps

This study demonstrates an active flow control for deflecting a direction of wake vortex structures behind a NACA0012 airfoil using an active morphing flap. Two-dimensional direct numerical simulations are performed for flows at the chord Reynolds number of 10,000, and the vortex pattern in the controlled and noncontrolled wakes as well as the effect of an actuation frequency on the control ability are rigorously investigated. It is found that there is an optimum actuation-frequency regime at around F + = 2.00 which is normalized by the chord length and freestream velocity. The wake vortex pattern of the well-controlled case is classified as the 2P wake pattern according to the Williamson’s categorization [1] [2], where the forced oscillation frequency corresponds to the natural vortex shedding frequency without control. The present classification of wake vortex patterns and finding of the optimum frequency regime in the wake deflection control can lead to a more robust design suitable for vortex-induced-vibration (VIV) related engineering systems.

Numerical analysis of deflection control of a gas plasma jet based on magnetohydrodynamic staggered electrode configuration

To control the deflection of the gas plasma jet, a new analytical method is proposed based on the Magnetohydrodynamic(MHD) technique. Based on the typical MHD power generation model, the applied voltage is applied to the staggered electrodes, that is, a pair of electrodes on the same side wall are connected to generate an axial current in the channel. Under the action of the magnetic field perpendicular to the direction of the flow, the plasma is subjected to electromagnetic forces perpendicular to these two directions, and the jet is deflected. The computational model including the Navier-Stokes equations coupled with electromagnetic source terms, the electric potential equation and Ohm’s law is solved. The deflection of the gas jet under the action of an electromagnetic field is observed, and the maximum deflection angle is about 14.8°. The influences of the electric field, magnetic field, and conductivity on the jet deflection are studied. Results show that although the influences of these three factors on the deflection are similar, and the effect of increasing the electric field strength is slightly greater, priority should be given to increasing the magnetic field strength from the perspective of reducing energy consumption. The Stuart number is introduced to assess the ability of electromagnetic force to control jet deflection. When the electromagnetic parameters are constant, this solution provides better control of low-density and low-speed fluid flows. The calculation results show that using the staggered electrode method configuration is feasible in terms of controlling the deflection of a plasma jet deflection.