Chitosan/Sodium Alginate Multilayer pH-Sensitive Films Based on Layer-by-Layer Self-Assembly for Intelligent Packaging

The abuse of plastic food packaging has brought about severe white pollution issues around the world.Developing green and sustainable biomass packaging is an effective way to solve this problem.Hence,a chitosan/sodium alginate-based multilayer film is fabricated via a layer-by-layer(LBL)self-assembly method.With the help of superior interaction between the layers,the multilayer film possesses excellent mechanical properties(with a tensile strength of 50 MPa).Besides,the film displays outstanding water retention property(blocking moisture of 97.56%)and ultraviolet blocking property.Anthocyanin is introduced into the film to detect the food quality since it is one natural plant polyphenol that is sensitive to the pH changes ranging from 1 to 13 in food when spoilage occurs.It is noted that the film is also bacteriostatic which is desired for food packaging.This study describes a simple technique for the development of advanced multifunctional and fully biodegradable food packaging film and it is a sustainable alternative to plastic packaging.

On-Chip Micro Temperature Controllers Based on Freestanding Thermoelectric Nano Films for Low-Power Electronics

Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity of temperature distribution in microsystems,making precise temperature control for electronic components extremely challenging.Herein,we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50×50μm^(2),which are fabricated from dense and flat freestanding Bi2Te3-based ther-moelectric nano films deposited on a newly developed nano graphene oxide membrane substrate.Its tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics.A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445μW,resulting in an ultrahigh temperature control capability over 100 K mW^(-1).Moreover,an ultra-fast cooling rate exceeding 2000 K s^(-1) and excellent reliability of up to 1 million cycles are observed.Our proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics.

A Facile Self-assembly Synthesis of Hexagonal ZnO Nanosheet Films and Their Photoelectrochemical Properties

Here, large-scale and uniform hexagonal zinc oxide(ZnO) nanosheet films were deposited onto indium tin oxide(ITO)-coated transparent conducting glass substrates via a facile galvanic displacement deposition process. Compared with other commonly used solution methods, this process avoids high temperature and electric power as well as supporting agents to make it simple and cost-effective. The as-fabricated ZnO nanosheet films have uniform hexagonal wurtzite structure. The photoelectrochemical(PEC) cell based on ZnO nanosheet film/ITO photoelectrode was also fabricated and its performance was improved by optimizing the solution concentration. A higher photocurrent density of*500 l A cm^(-2)under AM 1.5 G simulated illumination of 100 m W cm^(-2)with zero bias potential(vs. Ag/AgCl electrode) was obtained, which may ascribe to the increased surface-to-volume ratio of disordered Zn O nanosheet arrays. Our developed method may be used to deposit other oxide semiconductors, and the Zn O nanosheet film/ITO PEC cell can be used to design low-cost optoelectronic and photoelectrochemical devices.

Controllable fabrication of self-organized nano-multilayers in copper–carbon films

In order to clarify the influence of methane concentration and deposition time on self-organized nano-multilayers,three serial copper-carbon films have been prepared at various methane concentrations with different deposition times using a facile magnetron sputtering deposition system. The ratios of methane concentration(CH4/Ar+CH4) used in the experiments are 20%, 40%, and 60%, and the deposition times are 5 minutes, 20 minutes, and 40 minutes, respectively.Despite the difference in the growth conditions, self-organizing multilayered copper-carbon films are prepared at different deposition times by changing methane concentration. The film composition and microstructure are investigated by x-ray photoelectron spectroscopy(XPS), x-ray diffraction(XRD), field emission scanning electron microscopy(FESEM), and high-resolution transmission electron microscopy(HRTEM). By comparing the composition and microstructure of three serial films, the optimal growth conditions and compositions for self-organizing nano-multilayers in copper-carbon film are acquired. The results demonstrate that the self-organized nano-multilayered structure prefers to form in two conditions during the deposition process. One is that the methane should be curbed at low concentration for long deposition time,and the other condition is that the methane should be controlled at high concentration for short deposition time. In particular, nano-multilayered structure is self-organized in the copper-carbon film with copper concentration of 10-25 at.%.Furthermore, an interesting microstructure transition phenomenon is observed in copper-carbon films, that is, the nanomultilayered structure is gradually replaced by a nano-composite structure with deposition time and finally covered by amorphous carbon.

Gold Nanoparticulate Thin Films Fabricated by the Electrostatic Self-Assembly Process

Gold colloids were prepared by citrate-induced reduction of hydrogen tetrachloroaurale, and gold nanoparticles were electrostatically self-assembled with poly( diallyldimethylammonium chloride) into multi-layer thin films on si/icon and quartz substrates. The paniculate thin films were characterized by UV-vis spea-troscopy, surface, enhanced Raman scattering, atomic force microscopy and resistivity measurements. Due to the interparticle coupling between individual gold particles, an obvious collective particle plasmon resonance was ob-served on UV-vis spectra , and the particulate thin films exhibited a strong SERS effect. For multilayer thin films with a high particle coverage on substrates , resistivity of the order of 10-4 Ω·cm was yielded.

Fabrication of Au/SiO_(2) Nanocomposite Films by Self-Assembly Multilayer Method

Gold colloid was prepared by chemical reduction of hydrogen tetrachloroaurate, polyelectrolyte/gold nanoparticle/silica nanoparticie composite films were fabricated via an electrostatic self-assembly multilayer method, and composite films of gold nanoparticle dispersed in silica matrix were formed by heat-treating the polyelectrolyte/gold nanoparticle/silica nanoparticle composite films to eliminate the polyelectrolyte. The obtained composite films were investigated with UV-vis, TEM, AFM and XRD. The results show that the self-assembly multilayer method is a promising process to produce composite films of gold nanoparticle-dispersed in organic and/or inorganic matrixes.

6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin(Azo-R)was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin(NDR)with phenol,and a new covalentely attached multilayer film from Azo-R asH-donor and photosensitive diazoresin,diphenylamine-4-diazoresin(DR)as H-acceptor via H-bonding attraction by self-assembly technique has been fabricated.Following the decomposition of diazonium group of DR under exposure to UVlight,the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polarsolvents or electrolyte aqueous solutions.Thus the UV-irradiated azo-containing films can be used to measure photocurrentin a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte.It was confirmed that theazo-containing multilayer film is responsible for the photocurrent generation.

Novel self-assembled films of La-based phosphonate 3-aminopropyltriethoxysilane

Silane coupling reagent (3-aminopropyltriethoxysilane (APTES)) was prepared on single-crystal silicon substrates to form two-dimensional self-assembled monolayer (SAM). The terminal-NH2 groups in the film were in situ phosphorylated to -PO(OH)2 group to endow the film with good chemisorption ability. Then La-based thin films were deposited on phosphorylated APTES-SAM in order to make good use of the chemisorption ability of -PO(OH)2 groups. The thickness of the film was determined with ellipsometer, while phase transformation and surface morphology, surface energy, phase composition were analyzed by means of atomic force microscope (AFM), contact angle measurements and X-ray photoelectron spectroscopy (XPS). The results indicated that the terminal-NH2 groups could be completely transformed into desirable-PO(OH)2 groups after phosphorylation of APTES-SAM. Detailed XPS analysis of the La3+ peaks revealed that lanthanum element existed in the films in different states. As a result, conclusion could be made that lanthanum reacted with -PO(OH)2 groups on the surface of the substrate by chemical bond which would improve the bonding strength between the film and silicon substrate. Since the La-based thin films were well adhered to the silicon substrate, it might find promising application in the surface-modification of single-crystal Si and SiC in microelectromechanical systems (MEMS).

FABRICATION AND AFM/FFM STUDIES OF C_(60)-CONTAINING POLYELECTROLYTE SELF-ASSEMBLED FILMS

An initial investigation on the roughness and frictional properties of the self-assembled thin films from polyelectrolytes is presented. Star-shaped C-60-Poly(styrene-maleic anhydride) was successful prepared. The multilayer thin films have been fabricated on mica with diazoresin as the cationic polyelectrolyte and hydrolyzed star-shaped C-60-poly(styrene-maleic anhydride) as the anionic polyelectrolyte via self-assembly technique. The crosslinking structure of the films is formed from the conversion of ionic bond to covalent bond after UV irradiation. AFM/FFM investigations provide insights into the roughness and frictional properties on a microscale. The roughness depends strongly on the number of film layers in the case of C-60-containing films. The frictional forces of the films exhibited a well behaved non-linear relationship in response to the change of applied load. It supports the prediction of enhanced load-bearing property Of C60-containing thin films.

Characterization and tribological investigation of self-assembled trimethoxysilyl-functionalized poly(phthalazinone ether ketone)thin films on glass substrates

Trimethoxysilyl-functionalized PPEK（PKGS） films had been designed to serve as wear resistant coatings for silicon surfaces. These surface films were formed by a dip-coating technique applied to self-assembled monolayers（SAMs）.The formation and wetting behavior of PKGS films were characterized by means of contact angle measurement.The friction coefficient of the film prepared is very low（about 0.1）,and the anti-wear behavior is good,with a lack of failure after sliding over 1800 s.

Characterization and tribological investigation of self-assembled MPTS-MPTES/RE composite films

γ-mercapto-propyl trimethoxysilane （MPTS） and γ-methacryloxy propyltrimethoxysilane （MPTES） were self-assembled on a hy- droxylated glass substrate to form a two-dimensional organic monolayer （MPTS-MPTES SAM）. The terminal thiol groups （-SH） in the MPTS-MPTES SAM were in-situ oxidized into sulfonic acid groups （-SO3H） to endow the film with good chemisorption ability. Then rare earth （RE） （lanthanum-based） composite thin films were prepared by self-assembly technique based on the as-prepared SAM, taking advantage of the chemisorption ability of the sulfonic acid groups. Automatic force microscope （AFM）, X-ray photoelectron spectrometry （XPS）, contact angle measurement and ellipsometer were used to characterize MPTS-MPTES/RE composite films. The macrofriction and wear behaviors of the films sliding against an AISI-52100 steel ball were examined on a unidirectional friction and wear tester, and the worn surface morphologies were observed on an AFM. The results showed that MPTS-MPTES/RE films had a low friction coefficient （0.09） and a long wear life （5980 sliding pass） at a light load （50 mN）. It indicated that the superior tribological properties of the MPTS-MPTES/RE composite films were attributed to the special characteristic of RE elements, the mobility of the films and good bonding strength.

Hybrid Self-Assembled Multilayer Films Formed by Alternating Layers of Keggin Polyoxometalates and 1,10DAD

Hybrid self-assembled multilayer films were prepared by alternate adsorption of 1,10-diaminodecane (1,10-DAD) and Keggin polyoxometalates of SiW12O404-, SiW11VO405-, and PMo12O403-, respectively. The films were reproducibly grown at each adsorption cycle as monitored by UV spectroscopy.

Novel Covalently Linked Self-Assembled Films from a Functional Hyperbranched Conjugated Poly (Phenylene Vinylene)

A new self-assembled films of a functional dendritic molecule, hyperbranched conjugated poly (phenylene vinylene), is obtained through covalent bond linkage. The highly ordered and homogenous molecular films are obtained;and characterized by UV-vis spectra, fluorescent spectra and atomic force microscopy.

Method of Spectrophotometric Microanalysis Based on HRP/PET Self-assembly Film

Horseradish peroxidase monolayer was assembled on the surface of PET-CO2 substrate. The reaction kinetics of HRP/PET film and H2O2 in micro reactor was studied using improved spectrophotometer. The relative activity of self-assembly HRP/PET film still remains above 80% after storing for 150 days at 4℃. When applied to determination of H2O2 in sample, the recoveries of H2O2 are 96.5%~101.1%.

Three-dimensionally oriented organization of hexagonal MIL-96 microplates toward superior film microstructure

Preferential orientation control of metal—organic framework(MOF)films is advantageous for maximizing pore uniformity and minimizing grain-boundary defects.Nonetheless,the preparation of MOF films with both in-plane and out-of-plane orientations remains a grand challenge.In this study,we reported the preparation of three-dimensionally oriented MIL-96 layers through combining morphology control of MIL-96 seeds with addition of polyvinylpyrrolidone surfactants and arachidonic acids.The three-dimensionally oriented MIL-96 film was readily obtained through in-plane epitaxial growth.It is anticipated that the aforementioned protocol can be effective for obtaining diverse MOF films with a three-dimensionally oriented organization.

Intelligent responsive self-assembled micro-nanocapsules:Used to delay gel gelation time

In the application of polymer gels to profile control and water shutoff,the gelation time will directly determine whether the gel can"go further"in the formation,but the most of the methods for delaying gel gelation time are complicated or have low responsiveness.There is an urgent need for an effective method for delaying gel gelation time with intelligent response.Inspired by the slow-release effect of drug capsules,this paper uses the self-assembly effect of gas-phase hydrophobic SiO_(2) in aqueous solution as a capsule to prepare an intelligent responsive self-assembled micro-nanocapsules.The capsule slowly releases the cross-linking agent under the stimulation of external conditions such as temperature and pH value,thus delaying gel gelation time.When the pH value is 2 and the concentration of gas-phase hydrophobic SiO_(2) particles is 10%,the gelation time of the capsule gel system at 30,60,90,and 120℃is12.5,13.2,15.2,and 21.1 times longer than that of the gel system without containing capsule,respectively.Compared with other methods,the yield stress of the gel without containing capsules was 78 Pa,and the yield stress after the addition of capsules was 322 Pa.The intelligent responsive self-assembled micronanocapsules prepared by gas-phase hydrophobic silica nanoparticles can not only delay the gel gelation time,but also increase the gel strength.The slow release of cross-linking agent from capsule provides an effective method for prolongating the gelation time of polymer gels.

A matrix metalloproteinase-responsive hydrogel system controls angiogenic peptide release for repair of cerebral ischemia/reperfusion injury

Vascular endothelial growth factor and its mimic peptide KLTWQELYQLKYKGI(QK)are widely used as the most potent angiogenic factors for the treatment of multiple ischemic diseases.However,conventional topical drug delivery often results in a burst release of the drug,leading to transient retention(inefficacy)and undesirable diffusion(toxicity)in vivo.Therefore,a drug delivery system that responds to changes in the microenvironment of tissue regeneration and controls vascular endothelial growth factor release is crucial to improve the treatment of ischemic stroke.Matrix metalloproteinase-2(MMP-2)is gradually upregulated after cerebral ischemia.Herein,vascular endothelial growth factor mimic peptide QK was self-assembled with MMP-2-cleaved peptide PLGLAG(TIMP)and customizable peptide amphiphilic(PA)molecules to construct nanofiber hydrogel PA-TIMP-QK.PA-TIMP-QK was found to control the delivery of QK by MMP-2 upregulation after cerebral ischemia/reperfusion and had a similar biological activity with vascular endothelial growth factor in vitro.The results indicated that PA-TIMP-QK promoted neuronal survival,restored local blood circulation,reduced blood-brain barrier permeability,and restored motor function.These findings suggest that the self-assembling nanofiber hydrogel PA-TIMP-QK may provide an intelligent drug delivery system that responds to the microenvironment and promotes regeneration and repair after cerebral ischemia/reperfusion injury.

Controlled Microstructure and Photochromism of Inorganic-organic Thin Films by Ultrasound

A series of inorganic-organic thin films based on uniformly dispersed nanoparticles of polyoxometalates （POM）entrapped in polyacrylamide （PAM） matrix were prepared by ultrasonic method with different irradiation time.The microstructure, photochromic behavior and mechanism of the films were studied by transmission electron microscopy （TEM）, ultraviolet-visible spectra （UV-VIS） and Fourier transform-infrared spectroscopy （FT-IR）.The microstructure and photochromic properties of the hybrid thin films could be controlled by ultrasound.TEM image revealed that the average size of phosphotungstic acid （PWA） nanoparticles decreased from 20 to 10 nm with the ultrasound irradiation time from 30 to 60 min. After irradiated with ultraviolet light,the transparent films changed from colorless to blue and showed reversible photochromism. The hybrid film, with ultrasound irradiation for 60 min had higher photochromic efficiency and faster bleaching reaction than the one with ultrasound irradiation for 30 min. FT-IR spectra showed that the Keggin geometry of heteropolyoxometalate was still preserved inside the composites, and the interactions between polyanions and polymer matrix increased as the ultrasound time prolonged. It is suggested that the mechanism of the different photochromic properties for the inorganic-organic thin films is the variation of the microstructure and interfacial interactions induced by ultrasound.

Fabrication of TiO_2 Thin Film by Electrostatic Self-Assembly Method on Optical Fiber

Anionic surfactant sodium lauryl sulfate(SDS), cationic surfactant palmityl trimethyl ammonium chloride(CTAC) and TiO_2 were used to prepare multilayer films on quartz optic fibers by the electrostatic self-assembly (ESA) method. The whole self-assemble process, the function of surfactant and the effect of TiO_2 slurry′s concentration to the self-assemble were discussed. The isoelectric point of TiO_2 slurry measured by experiment is 6.8. The results show that whatever the concentration of the TiO_2 dispersion, a flat and compact adsorbed monolayer on the optic fiber can be built in a stable dispersion at lower pH. There is a adsorbed equilibrium on the substrate (fiber)/solution interface when enough time of incubation is given. A rough and loosen adsorbed layer is formed on the fiber surface by immersed the substrate in a high pH dispersion (pH>10) because the presence of hydroxyl on particle surface. Film thickness can be controlled by controlling the number of layers in the film.

STABILITY AND ELECTROCHEMICAL PROPERTIES OF FULL-CONJUGATED SELF-ASSEMBLED FILMS BASED ON POLYANILINE AND ITS ACID-SUBSTITUTED DERIVATES

The stability of full-conjugated self-assembled （SA） multilayer films based on partially doped polyaniline （PANI） as a polycation and poly（o-aminobenzoic acid） （PCAN）, poly（aniline-2-sulfonic acid） （PSAN） as polyanions is investigated in alkali aqueous solutions. The self-assembled PANI-PCAN films keep their stability within 24 h in 1 mol/L NaOH solution,-the PANI-PSAN films, however, maintain the stability for 20 min in the same condition because the solubility of PSAN in alkali solutions is much higher than that of PCAN. The electrochemical properties of the SA films are determined, and the film-CdS composites formed in situ are also reported.