Development and Tests of ZW-126/D2000-40 Vacuum Circuit Breakers with Controlled Switching Technology

A ZW-126/D2000-40 type single-break vacuum circuit breaker(VCB)with controlled switching technology is designed and produced in this paper.The results of type tests based on IEC and GB standards are presented.A 126 kV singlebreak vacuum interrupter(VI)with 3/4 coil axial magnetic field(AMF)contacts is used in the VCB,which can interrupt short currents of 40 kA.The external insulation of the VI is provided by SF_(6) at 0.1 MPa.In order to match the 126 kV single-break VI and controlled switching device,a long-stroke electro-magnetic force actuator(EMFA)with 16 kN closing holding force and 3.5 m/s average opening speed is designed.Moreover,a position tracking controlled switching device based on closed-loop control using the technology of a fuzzy control algorithm and pulse width modulation is applied to the controlled switching device.This device is applied to control the coil current of EMFA and the electromagnetic force,so as to control the EMFA to follow the ideal position curve.The type tests of 126 kV VCB are all passed according to the IEC62271-100 and GB1984-2014,including dielectric tests,basic short-circuit tests,shortline fault tests,out-of-phase tests,etc.The strong capacitive current breaking capacity and mechanical strength of the VCB are proved by the capacitive current switching test of class C2,electrical endurance test of class E2 and mechanical endurance test of class M2.The electromagnetic compatibility(EMC)tests are passed according to the IEC61000-4.The controlled switching test of capacitive current was successful according to IEC62271-302 and GB/T30846-2014,and the controlled switching accuracy is less than±0.5 ms.The test results show that the VCB has excellent performance,which has broad application prospects in special occasions at a 126 kV voltage level,such as a switching capacitor and no-load transformer,etc.

Parallel processing via carbon field emission-based controlled switching of regular bijective nano systolic networks,part 1:basics

Purpose-The purpose of this paper is to introduce new implementations for parallel processing applications using bijective systolic networks and the corresponding carbon-based field emission controlled switching.The developed implementations are performed in the reversible domain to perform the required bijective parallel computing,where the implementations for parallel computations that utilize the presented field-emission controlled switching and their corresponding m-ary(many-valued)extensions for the use in nano systolic networks are introduced.The first part of the paper presents important fundamentals with regards to systolic computing and carbon-based field emission that will be utilized in the implementations within the second part of the paper.Design/methodology/approach-The introduced systolic systems utilize recent findings in field emission and nano applications to implement the functionality of the basic bijective systolic network.This includes many-valued systolic computing via field emission techniques using carbon-based nanotubes and nanotips.The realization of bijective logic circuits in current and emerging technologies can be very important for various reasons.The reduction of power consumption is a major requirement for the circuit design in future technologies,and thus,the new nano systolic circuits can play an important role in the design of circuits that consume minimal power for future applications such as in low-power signal processing.In addition,the implemented bijective systems can be utilized to implement massive parallel processing and thus obtaining very high processing performance,where the implementation will also utilize the significant size reduction within the nano domain.The extensions of implementations to field emission-based many-valued systolic networks using the introduced bijective nano systolic architectures are also presented.Findings-Novel bijective systolic architectures using nano-based field emission implementations are introduced in this paper,and the implementation using the general scheme of many-valued computing is presented.The carbon-based field emission implementation of nano systolic networks is also introduced.This is accomplished using the introduced field emission carbon-based devices,where field emission from carbon nanotubes and nano-apex carbon fibers is utilized.The implementations of the many-valued bijective systolic networks utilizing the introduced nano-based architectures are also presented.Originality/value-The introduced bijective systolic implementations form new important directions in the systolic realizations using the newly emerging nano-based technologies.The 2-to-1 multiplexer is a basic building block in“switch logic,”where in switch logic,a logic circuit is realized as a combination of switches rather than a combination of logic gates as in the gate logic,which proves to be less costly in synthesizing multiplexer-based wide variety of modern circuits and systems since nano implementations exist in very compact space where carbon-based devices switch reliably using much less power than silicon-based devices.The introduced implementations for nano systolic computation are new and interesting for the design in future nanotechnologies that require optimal design specifications of minimum power consumption and minimum size layout such as in low-power control of autonomous robots and in the adiabatic low-power very-large-scale-integration circuit design for signal processing applications.

Investigation into the Independent Metering Control Performance of a Twin Spools Valve with Switching Technology-controlled Pilot Stage

In hydraulic area,independent metering control(IMC)technology is an effective approach to improve system efficiency and control flexibility.In addition,digital hydraulic technology(DHT)has been verified as a reasonable method to optimize system dynamic performance.Integrating these two technologies into one component can combine their advantages together.However,few works focused on it.In this paper,a twin spools valve with switching technologycontrolled pilot stage(TSVSP)is presented,which applied DHT into its pilot stage while appending IMC into its main stage.Based on this prototype valve,a series of numerical and experiment analysis of its IMC performance with both simulated load and excavator boom cylinder are carried out.Results showed fast and robust performance of pressure and flow compound control with acceptable fluctuation phenomenon caused by switching technology.Rising time of flow response in excavator cylinder can be controlled within 200 ms,meanwhile,the recovery time of rod chamber pressure under suddenly changed condition is optimized within 250 ms.IMC system based on TSVSP can improve both dynamic performance and robust characteristics of the target actuator so it is practical in valve-cylinder system and can be applied in mobile machineries.

Switching Control Method for Optimal State Feedback Controller of Nuclear Reactor Power System

Due to the nonlinearity of the reactor power system, the load tracking situation is closely related to the initial steady-state power and the final steady-state power after the introduction of the state feedback controller. Therefore, when the initial power and the final stable power are determined, the particle swarm optimization algorithm is used to find the optimal controller parameters to minimize the load tracking error. Since there are many combinations of initial stable power and final stable power, it is not possible to find the optimal controller parameters for all combinations, so the neural network is used to take the final stable power and the initial stable power as input, and the optimal controller parameters as the output. This method obtains the optimal state feedback controller switching control method can achieve a very excellent load tracking effect in the case of continuous power change, in the power change time point, the response is fast, in the controller parameter switching time point, the actual power does not fluctuate due to the change of controller parameters. .

Vacuum Switching Technology for Future of Power Systems

Even though switching in vacuum is a technology with almost 100 years of history,its recent develop-ments are still changing the future of power transmission and distribution systems.First,current switch-ing in vacuum is an eco-friendly technology compared to switching in SF 6 gas,which is the strongest greenhouse gas according to the Kyoto Protocol.Vacuum,an eco-friendly natural medium,is promising for reducing the usage of SF 6 gas in current switching in transmission voltage.Second,switching in vacuum achieves faster current interruption than existing alternating current(AC)switching technolo-gies.A vacuum circuit breaker(VCB)that uses an electromagnetic repulsion actuator is able to achieve a theoretical limit of AC interruption,which can interrupt a short-circuit current in the first half-cycle of a fault current,compared to the more common three cycles for existing current switching technologies.This can thus greatly enhance the transient stability of power networks in the presence of short-circuit faults,especially for ultra-and extra-high-voltage power transmission lines.Third,based on fast vacuum switching technology,various brilliant applications emerge,which are benefiting the power systems.They include the applications in the fields of direct current(DC)circuit breakers(CBs),fault current lim-iting,power quality improvement,generator CBs,and so forth.Fast vacuum switching technology is promising for controlled switching technology in power systems because it has low variation in terms of opening and closing times.With this controlled switching,vacuum switching technology may change the“gene”of power systems,by which power switching transients will become smoother.

Polytopic LPV modeling and gain-scheduled switching control for a flexible air-breathing hypersonic vehicle

A novel gain-scheduled switching control method for the longitudinal motion of a flexible air-breathing hypersonic vehicle （FAHV） is proposed. Firstly, velocity and altitude are selected as scheduling variables, a polytopic linear parameter varying （LPV） model is developed to represent the complex nonlinear longitudinal dynamics of the FAHV. Secondly, based on the obtained polytopic LPV model, the flight envelope is divided into four smaller subregions, and four gain-scheduled controllers are designed for these parameter subregions. Then, by the defined switching characteristic function, these gain-scheduled controllers are switched in order to guarantee the closed-loop FAHV system to be asymptotically stable and satisfy a given tracking error performance criterion. The condition of gain-scheduled switching controller synthesis is given in terms of linear matrix inequalities （LMIs） which can be easily solved by using standard software packages. Finally, simulation results show the effectiveness of the presented method.

Exponential stabilization of networked control systems and design of switching controller

This paper deals with the problem of switching between an open-loop estimator and a close-loop estimator for compensating transmission error and packet dropout of networked control systems. Switching impulse is considered in order to reduce the error between theory and application, a sufficient condition for exponential stabilization of networked control systems under a given switching rule is presented by multiple Lyapunov-like functions. These results are presented for both continuous-time and discrete-time domains. Controllers are designed by means of linear matrix inequalities. Sim- ulation results show the feasibility and efficiency of the proposed method.

Robust exponential stability of uncertain discretetime impulsive switching systems with state delay

A new class of hybrid impulsive and switching models are introduced and their robust exponential stability and control synthesis are addressed. The proposed switched system is composed of stable subsystems and unstable subsystems, which not only involves state delay and norm-bounded time-varying parameter uncertainties, but also contains the impulsive switching effects between the subsystems. Based on the extension of the system dimension and the concept of average dwell time, a kind of practically useful switching rule is presented which guarantees the desired robust exponential stability. A switched state feedback controller is also given.

Adaptive switching control of discrete time nonlinear systems based on multiple models

We use the approach of “optimal” switching to design the adaptive control because the design among multiple models is intuitively more practically feasible than the traditional adaptive control in improving the performances. We prove that for a typical class of nonlinear systems disturbed by random noise, the multiple model adaptive switching control based on WLS (Weighted Least Squares) or projected-LS (Least Squares) is stable and convergent.

Extended state observer based smooth switching control for tilt-rotor aircraft

A tilt-rotor aircraft has three flight modes: helicopter mode, airplane mode and conversion mode. Unlike the traditional aircraft, the tilt-rotor aircraft, which combines the characteristics of helicopters and fixed-wing aircraft, is a complex multi-body system with the violent variation of the aerodynamic parameters. For these characteristics, a new smooth switching control scheme is provided for the tilt-rotor aircraft. First, the reference commands for airspeed and nacelle angles are calculated by analyzing the conversion corridor and the conversion path. Subsequently, based on the finite-time switching theorem, an average dwell time condition is designed to guarantee the stability in the switching process. Besides, considering the state vibrations and bumps may appear in switching points, the fuzzy weighted logic is employed to improve the system transient performance. For disturbance rejection, three extended state observers are designed separately to estimate the disturbances in the switched systems. Compared with the traditional auto disturbance rejection control and proportion integration differentiation control, this method overcomes the conservatism of wasting the whole model information. The control performances of robustness and smoothness are verified with simulation, which shows that the new smooth switching control scheme is more targeted and superior than the traditional design method.

Generation of transient chaos from two-dimensional systems via a switching approach

A new approach of generating transient chaos from two-dimensional（2D） continuous autonomous systems within finite time is presented.Based on an absolute-value switching law,the phenomenon of transient chaos takes place by switching between three 2D systems.Basic dynamic behavior of the systems is investigated.Numerical examples illustrate the validity of the results.

Discretization behavior analysis of a switching control system from a unified mathematical approach

A useful unified analysis framework is proposed for exploring the intriguing behaviors of a second-order switching control system. Complex discretization behaviors of the switching control system are explored in detail, and some intrinsic relationships between the system periodic behaviors and their associated symbolic sequences are studied. Keywords Switching control - Chaos - Discretisation - Periodicity This work was supported by the Australian Research Council and the Hong Kong Research Grants Council for their financial supports, under the CERG Grants CityU 1018/01E, 1004/02E, and 1115/03E.

A Switching Method for a Model Reference Robust Control with Unknown High Frequency Gain Sign

The problem of controlling a single-input-single-output plant without prior knowledge of high frequency gain sign is addressed by using the model reference robust control approach.A switching method is proposed based on a monitoring function so that after a finite number of swi- tchings the tracking error converges to zero exponentially.Furthermore,it is shown that if some initial states of the closed-loop system are zero,only one switching is needed.

Adaptive switching control of a class of nonlinear systems based on mixed multiple models

The transient behaviors of traditional adaptive control may be very poor in general. A practically feasible approach to improve the transient performances is the adoption of adaptive switc- hing control. For a typical class of nonlinear systems disturbed by random noises, mixed multiple models consisting of adaptive model and fixed models were considered to design the switching con- trol law. Under certain assumptions, the nonlinear system with the switching control law was proved rigorously to be stable and optimal A simulation example was provided to compare the performance of the switching control and the traditional adaptive control.

Stability analysis of linear/nonlinear switching active disturbance rejection control based MIMO continuous systems

In this paper,a linear/nonlinear switching active disturbance rejection control(SADRC)based decoupling control approach is proposed to deal with some difficult control problems in a class of multi-input multi-output(MIMO)systems such as multi-variables,disturbances,and coupling,etc.Firstly,the structure and parameter tuning method of SADRC is introduced into this paper.Followed on this,virtual control variables are adopted into the MIMO systems,making the systems decoupled.Then the SADRC controller is designed for every subsystem.After this,a stability analyzed method via the Lyapunov function is proposed for the whole system.Finally,some simulations are presented to demonstrate the anti-disturbance and robustness of SADRC,and results show SADRC has a potential applications in engineering practice.

An Arrangement of Channels and Transceivers in Optical Packet Switching Networks

Based on a media access and control（MAC）protocol,an arrangement of channels and transceivers in optical packet switching dense wavelength division multiplexing（DWDM）networks is proposed in this paper.In order to reduce the cost of nodes,fixed transmitters and receivers are used instead of tunable transmitters and receivers.Two fixed transmitters and many fixed receivers are used in each node in the scheme.The average waiting delay of this scheme is analyzed through mathematics and computer simulation.The result shows that the property of the scheme is almost the same as using tunable transmitter and receiver.Furthermore,if the tuning time of tunable transmitters is taken into account,the performance of the tunable transmitter scheme is poor than this scheme at the average waiting delay and throughput of the network.

Rapid stabilization of stochastic quantum systems in a unified framework

Rapid stabilization of general stochastic quantum systems is investigated based on the rapid stability of stochastic differential equations.We introduce a Lyapunov-LaSalle-like theorem for a class of nonlinear stochastic systems first,based on which a unified framework of rapidly stabilizing stochastic quantum systems is proposed.According to the proposed unified framework,we design the switching state feedback controls to achieve the rapid stabilization of singlequbit systems,two-qubit systems,and N-qubit systems.From the unified framework,the state space is divided into two state subspaces,and the target state is located in one state subspace,while the other system equilibria are located in the other state subspace.Under the designed state feedback controls,the system state can only transit through the boundary between the two state subspaces no more than two times,and the target state is globally asymptotically stable in probability.In particular,the system state can converge exponentially in(all or part of)the state subspace where the target state is located.Moreover,the effectiveness and rapidity of the designed state feedback controls are shown in numerical simulations by stabilizing GHZ states for a three-qubit system.

Robust Feedback Set Stabilization of Logic Networks with State-Dependent Uncertain Switching and Control Constraints

This study investigates the robust feedback set stabilization of switched logic control networks(SLCNs)with state-dependent uncertain switching and control constraints.First,based on the properties of the semi-tensor product of matrices and the vector representation of logic,an SLCN with state-dependent uncertain switching and control constraints is expressed in algebraic form.Second,an input transformation and a switching model are constructed to transfer the original SLCN into one with a free control input and arbitrary switching.The equivalence between the set stabilizability of the original SLCN and that of the resulting SLCN is established.Based on such equivalence,the authors propose a necessary and sufficient condition for robust feedback set stabilizability.Finally,an example is presented to demonstrate the application of the results obtained.

Parallel processing via carbon field emission-based controlled-switching of regular bijective nano systolic networks,Part II Architectural implementation

Purpose–The purpose of this paper is to introduce new implementations for parallel processing applications using bijective systolic networks and their corresponding carbon-based field emission controlled switching.The developed implementations are performed in the reversible domain to perform the required bijective parallel computing,where the implementations for parallel computations that utilize the presented field-emission controlled switching and their corresponding many-valued(m-ary)extensions for the use in nano systolic networks are introduced.The second part of the paper introduces the implementation of systolic computing using two-to-one controlled switching via carbon-based field emission that were presented in the first part of the paper,and the computational extension to the general case of many-valued(m-ary)systolic networks utilizing many-to-one carbon-based field emission is also introduced.Design/methodology/approach–The introduced systolic systems utilize recent findings in field emission and nano applications to implement the functionality of the basic bijective systolic network.This includes many-valued systolic computing via field-emission techniques using carbon-based nanotubes and nanotips.The realization of bijective logic circuits in current and emerging technologies can be very important for various reasons.The reduction of power consumption is a major requirement for the circuit design in future technologies,and thus,the new nano systolic circuits can play an important role in the design of circuits that consume minimal power for future applications such as in low-power signal processing.In addition,the implemented bijective systems can be utilized to implement massive parallel processing and thus obtaining very high processing performance,where the implementation will also utilize the significant size reduction within the nano domain.The extensions of implementations to field emission-based many-valued systolic networks using the introduced bijective nano systolic architectures are also presented.Findings–Novel bijective systolic architectures using nano-based field emission implementations are introduced in this paper,and the implementation using the general scheme of many-valued computing is presented.The carbon-based field emission implementation of nano systolic networks is also introduced.This is accomplished using the introduced field-emission carbon-based devices,where field emission from carbon nanotubes and nano-apex carbon fibersisutilized.The implementationsof the many-valued bijective systolic networks utilizing the introduced nano-based architectures are also presented.Practical implications–The introduced bijective systolic implementations form new important directions in the systolic realizations using the newly emerging nano-based technologies.The 2-to-1 multiplexer is a basic building block in“switch logic,”where in switch logic,a logic circuit is realized as a combination of switches rather than a combination of logic gates as in the gate logic,which proves to be less costly in synthesizing multiplexer-based wide variety of modern circuits and systems since nano implementations exist in very compact space where carbon-based devices switch reliably using much less power than silicon-based devices.The introduced implementations for nano systolic computation are new and interesting for the design in future nanotechnologies that require optimal design specifications of minimum power consumption and minimum size layout such as in low-power control of autonomous robots and in the adiabatic low-power VLSI circuit design for signal processing applications.Originality/value–The introduced bijective systolic implementations form new important directions in the systolic realizations utilizing the newly emerging nanotechnologies.The introduced implementations for nano systolic computation are new and interesting for the design in future nanotechnologies that require optimal design specifications of high performance,minimum power and minimum size.

Planning and Control of COP-Switch-Based Planar Biped Walking

Efficient walking is one of the main goals of researches on biped robots. A feasible way is to translate the understanding from human walking into robot walking, for example, an artificial control approach on a human like walking structure. In this paper, a walking pattern based on Center of Pressure （COP） switched and modeled after human walking is introduced firstly. Then, a parameterization method for the proposed walking gait is presented. In view of the complication, a multi-space planning method which divides the whole planning task into three sub-spaces, including simplified model space, work space and joint space, is proposed. Furthermore, a finite-state-based control method is also developed to implement the proposed walking pattern. The state switches of this method are driven by sensor events. For convincing verification, a 2D simulation system with a 9-1ink planar biped robot is developed. The simulation results exhibit an efficient walking gait.