Feedback control scheme of traffic jams based on the coupled map car-following model

Based on the pioneering work of Konishi et al. [Phys. Rev. E （1999） 60 4000], a new feedback control scheme is presented to suppress traffic jams based on the coupled map car-following model under the open boundary condition. The effect of the safe headway on the traffic system is considered. According to the control theory, the condition under which traffic jams can be suppressed is analyzed. The results are compared with the previous results concerning congestion control. The simulations show that the suppression performance of our scheme on traffic jams is better than those of the previous schemes, although all the schemes can suppress traffic jams. The simulation results are consistent with theoretical analyses.

Design of process and control scheme for cyclohexanol production from cyclohexene using reactive distillation

Cyclohexanol is a commonly used organic compound.Currently,the most promising industrial process for synthesizing cyclohexanol,by cyclohexene hydration,suffers from a low conversion rate and difficult separation.In this paper,a three-column process for catalytic distillation applicable in the hydration of cyclohexene to cyclohexanol was established to solve these.Simulation with Aspen Plus shows that the process has good advantages,the conversion of cyclohexene reached 99.3%,and the product purity was>99.2%.The stable operation of the distillation system requires a good control scheme.The design of the control scheme is very important.However,at present,the reactive distillation process for cyclohexene hydration is under investigation experimentally and by steady-state simulation.Therefore,three different plant-wide control schemes were established(CS1,CS2,CS3) and the position of temperature sensitive stage was selected by using sensitivity analysis method and singular value decomposition method.The Tyreus-Luyben empirical tuning method was used to tune the controller parameters.Finally,Aspen Dynamics simulation software was used to evaluate the performance of the three control schemes.By introducing ΔF±20% and χ_(ENE)±5%,comparison the changes in product purity and yield of the three different control schemes.By comparison,we can see that the control scheme CS3 has the best performance.

CONTROL SCHEMES FOR CMAC NEURAL NETWORK-BASED VISUAL SERVOING

In IBVS (image based visual servoing), the error signal in image space should be transformed into the control signal in the input space quickly. To avoid the iterative adjustment and complicated inverse solution of image Jacobian, CMAC (cerebellar model articulation controller) neural network is inserted into visual servo control loop to implement the nonlinear mapping. Two control schemes are used. Simulation results on two schemes are provided, which show a better tracking precision and stability can be achieved using scheme 2.

Control schemes for synchronizing two subnetworks with weak couplings

In this paper, we propose a well-designed network model with a parameter and study full and partial synchronization of the network model based on the stability analysis. The network model is composed of a star-coupled subnetwork and a globally coupled subnetwork. By analyzing the special coupling configuration, three control schemes are obtained for synchronizing the network model. Further analysis indicates that even if the inner couplings in each subnetwork are very weak, two of the control schemes are still valid. In particular, if the outer coupling weight parameter 0 is larger than （n2 - 2n）/4, or the subnetwork size n is larger than 02, the two subnetworks with weak inner couplings can achieve synchronization. In addition, the synchronizability is independent of the network size in case of 0 〈 0 〈 n/（n ＋ 1 ）. Finally, we carry out some numerical simulations to confirm the validity of the obtained control schemes. It is worth noting that the main idea of this paper also applies to any network consisting of a dense subnetwork and a sparse network.

An Apparatus Design for the Vehicle Control Scheme in Personal Rapid Transit System

A new transportation technology known as personal rapid transit （PRT） is being developed by multiple different companies around the world, and one system is under commercial operations in the United Kingdom. Each design is different, but they all share a need to operate many automated transit vehicles at very close headways. Safe operation will require a level of control an order of magnitude above any current transit system. As a result, new techniques will be needed for the development and testing of the mechanical and control systems. In this paper an apparatus for developing and testing a PRT vehicle control scheme is demonstrated. This system is composed of independent modules that represent virtual vehicles, a central control system, a man-machine interface and a monitoring device. It can be used to implement and to evaluate the designed vehicle control algorithm. The vehicle control algorithm is designed and simulated in a combined simulation platform that consists of Matlab/Simulink and Labview Simulation Interface Toolkit. Simple operational scenarios are proposed for the testing of the proposed vehicle control apparatus.

Design of Control Scheme for Variable Air Volume Air- conditioning System

The air quantity of variable air volume system for the rooms and the total air quantity of the system changes with the change of room load. Combined with the system composition in the laboratory, the paper determines the control scheme of the variable air volume system, that is, indoor temperature-control, indoor positive pressure control, air distribution static pressure control, air-supply temperature control and new air volume control. The dotted lines with arrows mean the output signals from the control unit to actuator, and the solid lines with arrows represent the input signals from the actuator to the control unit.

Force assistant master-slave telerehabilitation robotic system

A prototype of the master slave telerehabilitation robotic system with force feedback is developed. This system contains a pair of robots with the master being operated by the therapist and the slave following the master to guide the patients to exercise. A slave device with a slave controller is designed to stretch and mobilize the impaired elbow joints accurately and safely. A master device with a master controller is designed to control/monitor the procedure of treatment and assess the outcome of treatment remotely and accurately. By using the twoport network theory and the circuit equivalent impedance models, the position-force control scheme is designed to generate force feedback for the therapist who is to be informed of the interaction force between the subject and the robot arm during exercise. Experiments were conducted with a healthy male. Results show that the therapist can guide the patient to exercise by the master arm and can feel the interaction forces between the impaired arm and the robot. Compared with the traditional therapy, this system is more cost-efficient, more convenient and safer for both the stroke patients and the clinicians.

The Design and Control of Distillation Column with Side Reactors for Chlorobenzene Production

The distillation column with side reactors (SRC) can overcome the temperature/pressure mismatch in the traditional reactive distillation, the column operates at temperature/pressure favorable for vapor-liquid separation, while the reactors operate at temperatures/pressures favorable for reaction kinetics. According to the smooth operation and automatic control problem of the distillation column with side reactors (SRC), the design, simulation calculation and dynamic control of the SCR process for chlorobenzene production are discussed in the paper. Firstly, the mechanism models, the integrated structure optimal design and process simulation systems are established, respectively. And then multivariable control schemes are designed, the controllability of SRC process based on the optimal steady-state integrated structure is explored. The dynamic response performances of closed-loop system against several disturbances are discussed to verify the effectiveness of control schemes for the SRC process. The simulating results show that the control structure using conventional control strategies can effectively overcome feeding disturbances in a specific range.

Unified Vibration Suppression and Compliance Control for Flexible Joint Robot

An adaptive control scheme is presented,which can simultaneously realize vibration suppression and compliance control for flexible joint robot(FJR).The proposed control scheme provides a unified formulation for both vibration suppression mode,where FJR tracks the desired position with little vibration,and compliance mode,in which FJR presents passive.Instead of designing multiple controllers and switching between them,both modes are integrated into a single controller,and the transition between two modes is smooth and stable.The stability of the closed-loop system is theoretically proven via the Lyapunov method,with the considering the dynamics uncertainties in both link side and motor side.Simulation results are presented to illustrate good performances of the proposed control scheme.

Direct and Indirect Gradient Control for Static Optimisation

Static “self-optimising” control is an important concept, which provides a link between static optimisation and control. According to the concept, a dynamic control system could be configured in such a way that when a set of certain variables are maintained at their setpoints, the overall process operation is automatically optimal or near optimal at steady-state in the presence of disturbances. A novel approach using constrained gradient control to achieve “self-optimisation” has been proposed by Cao. However, for most process plants, the information required to get the gradient measure may not be available in real-time. In such cases, controlled variable selection has to be carried out based on measurable candidates. In this work, the idea of direct gradient control has been extended to controlled variable selection based on gradient sensitivity analysis (indirect gradient control). New criteria, which indicate the sensitivity of the gradient function to disturbances and implementation errors, have been derived for selection. The particular case study shows that the controlled variables selected by gradient sensitivity measures are able to achieve near optimal performance.

Modeling and Control of Head of the Underwater Snake-like Robot Swimming

In order to solve oscillation of head of the underwater snake-like robot,the Central Pattern Generator( CPG)-based control scheme with head-controller was presented. The Kane dynamic model was constructed to be processed with a commercial package MotionGenesis Kane 5. 3,to which the proposed control scheme was applied. The relation between CPG parameters and orientation offset of head was investigated. The target orientation of head-controller was calculated through a convenient method. The advantage of this control scheme is that the head of the underwater snake-like robot remains in the forward direction during swimming. To prove the feasibility of the proposed methodology,two basic motion patterns,swimming along the straight line and swimming along the curved path,had been implemented in our simulation platform. The results showed that the simulation platform can imitate the swimming of the underwater snake-like robot and the head of the underwater snake-like robot remains in a fixed orientation directed towards the target. The oscillation of head's orientation is inhibited effectively.

A Lyapunov-based three-axis attitude intelligent control approach for unmanned aerial vehicle

A novel Lyapunov-based three-axis attitude intelligent control approach via allocation scheme is considered in the proposed research to deal with kinematics and dynamics regarding the unmanned aerial vehicle systems.There is a consensus among experts of this field that the new outcomes in the present complicated systems modeling and control are highly appreciated with respect to state-of-the-art.The control scheme presented here is organized in line with a new integration of the linear-nonlinear control approaches,as long as the angular velocities in the three axes of the system are accurately dealt with in the inner closed loop control.And the corresponding rotation angles are dealt with in the outer closed loop control.It should be noted that the linear control in the present outer loop is first designed through proportional based linear quadratic regulator(PD based LQR) approach under optimum coefficients,while the nonlinear control in the corresponding inner loop is then realized through Lyapunov-based approach in the presence of uncertainties and disturbances.In order to complete the inner closed loop control,there is a pulse-width pulse-frequency(PWPF) modulator to be able to handle on-off thrusters.Furthermore,the number of these on-off thrusters may be increased with respect to the investigated control efforts to provide the overall accurate performance of the system,where the control allocation scheme is realized in the proposed strategy.It may be shown that the dynamics and kinematics of the unmanned aerial vehicle systems have to be investigated through the quaternion matrix and its corresponding vector to avoid presenting singularity of the results.At the end,the investigated outcomes are presented in comparison with a number of potential benchmarks to verify the approach performance.

Synchronization of perturbed chaotic systems via nonlinear control

Chaos synchronization of systems with perturbations was investigated.A generic nonlinear control scheme to realize chaos synchronization of systems was proposed.This control scheme is flexible and practicable,and gives more freedom in designing controllers in order to achieve some desired performance.With the aid of Lyapunov stability theorem and partial stability theory,two cases were presented:1) Chaos synchronization of the system without perturbation or with vanishing perturbations;2) The boundness of the error state for the system with nonvanishing perturbations satisfying some conditions.Finally,several simulations for Lorenz system were provided to verify the effectiveness and feasibility of our method.Compared numerically with the existing results of linear feedback control scheme,the results are sharper than the existing ones.

Enhancement of Distributed Generation by Using Custom Power Device

Wind energy （WE） has become immensely popular for distributed generation （DG）. This case presents the monitoring, modeling, control, and analysis of the two-level three-phase WE based DG system where the electric grid interfacing custom power device （CPD） is controlled to perform the smart exchanging of electric power as per the Indian grid code. WE is connected to DC link of CPD for the grid integration purpose. The CPD based distributed static compensator, i.e. the distributed static synchronous compensator （DSTATCOM）, is utilized for injecting the wind power to the point of common coupling （PCC） and also acts against the reactive power demand. The novel indirect current control scheme of DSTATCOM regulates the power import and export between the WE and the electric grid system. It also acts as a compensator and performs both the key features simultaneously. Hence, the penetration of additional generated WE power to the grid is increased by 20% to 25%. The burden of reactive power compensation from grid is reduced by DSTATCOM. The modeling and simulation are done in MATLAB. The results are validated and verified.

Synchronization of impulsively coupled complex networks

We investigate the synchronization of complex networks,which are impulsively coupled only at discrete instants.Based on the comparison theory of impulsive differential systems,a distributed impulsive control scheme is proposed for complex dynamical networks to achieve synchronization.The proposed scheme not only takes into account the influence of all nodes to network synchronization,which depends on the weight of each node in the network,but also provides us with a flexible method to select the synchronized state of the network.In addition,it is unnecessary for the impulsive coupling matrix to be symmetrical.Finally,the proposed control scheme is applied to a chaotic Lorenz network and Chua＇s circuit network.Numerical simulations are used to illustrate the validity of this control scheme.

Head Orientation Stability of Underwater Snake-Like Robot Swimming

In prior research,the orientation of head of the snake-like robot is changed according to the sinusoidal wave. To solve this problem,we propose Central Pattern Generator( CPG)-based control scheme with head-controller to stabilize the head of the underwater snake-like robot. The advantage of the CPG-based control scheme with head-controller is that the head of the underwater snake-like robot is direct to the target orientation during swimming. The relation between CPG parameters and orientation stability of head is discussed.The adaptation of the proposed method to environment changes is tested. The influences of CPG parameters and hydrodynamic forces on the orientation offset of head are investigated. The target orientation( the input of headcontroller) with an experimental optimization is calculated through a convenient method. To prove the feasibility of the proposed methodology,the different swimming modes have been implemented in our simulation platform.The results show that the oscillation of head's orientation is inhibited effectively,and the proposed method has strong adaptation to environment and CPG parameters changes.

QoE Assessment in Haptic Teleoperation Systems： Position-Position versus Position-Force

In this paper, we make a comparison of haptic control schemes （position-position and position-force control schemes） for two haptic teleoperation systems by QoE （quality of experience） assessment. One is a remote control system with haptic media and video. In the system, we can write characters by controlling a haptic interface device at a remote place with another haptic interface device while watching video. The other is a remote instruction system with haptic media, video and voice. By using the system, a teacher can actively write characters and teach a student how to write the characters. The student can also write characters actively, and the teacher can confirm how the student writes the characters. We investigate the influences of network delay on QoE for the two systems with the two haptic control schemes.

Application Strategy of PLC Technology in Energy-Saving Control of Tunnel Lighting

In this study,we investigated on the application of planar lightwave circuit(PLC)technology in energy-saving control of tunnel lighting.The application status of PLC in the field of energy saving followed by the necessity of energy saving in tunnel lighting was analyzed.Finally,the application of PLC in tunnel lighting energy-saving control around the three dimensions of system overall architecture design,control scheme,and program control process was investigated.The results showed that the system meets the requirements of control effect,robustness,and visual effect after trial operation,and is suitable for practical applications.

Gust response modeling and alleviation scheme design for an elastic aircraft

Time-domain approaches are presented for analysis of the dynamic response of aeroservoelastic systems to atmospheric gust excitations. The continuous and discrete gust inputs are defined in the time domain. The time-domain approach to continuous gust response uses a state-space formulation that requires the frequency-dependent aerodynamic coefficients to be approximated with the rational function of a Laplace variable. A hybrid method which combines the Fourier transform and time-domain approaches is used to calculate discrete gust response. The purpose of this approach is to obtain a time-domain state-space model without using rational function approximation of the gust columns. Three control schemes are designed for gust alleviation on an elastic aircraft, and three control surfaces are used: aileron, elevator and spoiler. The signals from the rate of pitch angle gyroscope or angle of attack sensor are sent to the elevator while the signals from accelerometers at the wing tip and center of gravity of the aircraft are sent to the aileron and spoiler, respectively. All the control laws are based on classical control theory. The results show that acceleration at the center of gravity of the aircraft and bending-moment at the wing-root section are mainly excited by rigid modes of the aircraft and the accelerations at the wing-tip are mainly excited by elastic modes of the aircraft. All the three control schemes can be used to alleviate the wing-root moments and the accelerations. The gust response can be alleviated using control scheme 3, in which the spoiler is used as a control surface, but the effects are not as good as those of control schemes 1 and 2.