Improving Heat Transfer in Parabolic Trough Solar Collectors by Magnetic Nanofluids

A parabolic trough solar collector(PTSC)converts solar radiation into thermal energy.However,low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants.Thermal performance of PTSC is enhanced in this study by incorporating magnetic nanoparticles into the working fluid.The circular receiver pipe,with dimensions of 66 mm diameter,2 mm thickness,and 24 m length,is exposed to uniform temperature and velocity conditions.The working fluid,Therminol-66,is supplemented with Fe3O4 magnetic nanoparticles at concentrations ranging from 1%to 4%.The findings demonstrate that the inclusion of nanoparticles increases the convective heat transfer coefficient(HTC)of the PTSC,with higher nanoparticle volume fractions leading to greater heat transfer but increased pressure drop.The thermal enhancement factor(TEF)of the PTSC is positively affected by the volume fraction of nanoparticles,both with and without a magnetic field.Notably,the scenario with a 4%nanoparticle volume fraction and a magnetic field strength of 250 G exhibits the highest TEF,indicating superior thermal performance.These findings offer potential avenues for improving the efficiency of PTSCs in solar thermal plants by introducing magnetic nanoparticles into the working fluid.

Experimental Study and Thermal Modelling of Cocoa Shell Convective Drying in an Indirect Solar Dryer

The concern of the present work is the convective drying of empty cocoa shells in an indirect solar dryer. Some drying experiments, using one sample, were carried out. During the experiments, the sample is introduced in the drying chamber. Then at steady time intervals, the sample is withdrawn from the drying chamber, for a rapid weighing. After each weighing, the sample is reintroduced in the dryer. At each time interval, the ambient temperature of the drying chamber and its relative humidity γ are measured by a thermo-hygrometer. From the experimental data, a theoretical determination of the moisture evaporated from the product was performed and a good agreement was found between the theoretical and experimental values, confirmed by the value of the RMSE. Those calculations used the constants in the Nusselt number found in literature. Then those constants were evaluated again, to get new values more suitable with the experimental data. The dimensionless numbers of Nusselt, Grashof and Prandtl were calculated. That allowed the calculation of the average value of the Nusselt number. The average convective heat transfer coefficient was determined.

Heat Transfer Process of Bubble during the Occurrence of Cavitation in Hydraulic System

Thermal characteristic of cavitation has great influence on the process of occurrence,development and collapse of bubble in hydraulic system. By choosing the stage of bubble growth as the research object,combining with the characteristic of the process of bubble occurrence and development in hydraulic system, and ignoring the impact of thermal radiation,the heat transfer situation of bubble growth was analyzed under appropriate assumptions of thermodynamic conditions in the bubble generation and development process. The mathematical expression of the temperature change of bubble was deduced using thermodynamic principle. Through combining the expression with classic Rayleigh-Plesset Equation,numerical calculation was carried out and the temperature variation over time( or bubble radius) was obtained. The influences of convective heat transfer coefficient of bubble and polytropic exponent on the thermodynamic process of bubble were analyzed. Finally,the thermal characteristic of bubble growth after cavitation occurrence was summarized.

SIMULATION OF STEEL COIL HEAT TRANSFER IN HPH FURNACE

The mathematical model has been estublished for the simulation of steel coil＇s heat transfer during annealing thermal process in HPH （high performance hydrogen） furnace. The equivalent radial thermal conductivity is adopted by statistical analysis regression approach through the combination of a large quantity of production data collected in practice and theoretical analyses. The effect of the number of coils on circulating flow gas is considered for calculating the convection heat transfer coefficient, The temperature within the coil is predicted with the developed model during the annealing cycle including heating process and cooling process. The good consistently between the predicted results and the experimental data has demonstrated that the mathematical model established and the parameters identified by this paper are scientifically feasible and the effective method of calculation for coil equivalent radial heat transfer coefficient and circulating gas flow has been identified successfully, which largely enhances the operability and feasibility of the mathematic- model. This model provides a theoretical basis and an effective means to conduct studies on the impact that foresaid factors may imposed on the steel coil＇s temperature field, to analyze the stress within coils, to realize online control and optimal production and to increase facilily output by increasing heating and cooling rates of coils without producing higher thermal stress.

Comparative Experimental Study on Heat Transfer Characteristics of Building Exterior Surface at High and Low Altitudes

The external surface heat transfer coefficient of building envelope is one of the important parameters necessary for building energy saving design,but the basic data in high-altitude area are scarce.Therefore,the authors propose a modified measurement method based on the heat balance of a model building,and use the same model building to measure its external surface heat transfer coefficient under outdoor conditions in Chengdu city,China at an altitude of 520 m and Daocheng city at an altitude of 3750 m respectively.The results show that the total heat transfer coefficient(h_(t))of building surface in high-altitude area is reduced by 34.48%.The influence of outdoor wind speed on the convective heat transfer coefficient(h_(c))in high-altitude area is not as significant as that in low-altitude area.The fitting relation between convection heat transfer coefficient and outdoor wind speed is also obtained.Under the same heating power,the average temperature rise of indoor and outdoor air at highaltitude is 41.9%higher than that at low altitude,and the average temperature rise of inner wall is 25.8%higher than that at low altitude.It shows that high-altitude area can create a more comfortable indoor thermal environment than low-altitude area under the same energy consumption condition.It is not appropriate to use the heat transfer characteristics of the exterior surface of buildings in low-altitude area for building energy saving design and related heating equipment selection and system terminal matching design in high-altitude area.

Temperature field model in surface grinding: a comparative assessment

Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increase in temperature due to high specific energy,which can lead to surface thermal damage.Therefore,ensuring control over the surface integrity of workpieces during grinding becomes a critical concern.This necessitates the development of temperature field models that consider various parameters,such as workpiece materials,grinding wheels,grinding parameters,cooling methods,and media,to guide industrial production.This study thoroughly analyzes and summarizes grinding temperature field models.First,the theory of the grinding temperature field is investigated,classifying it into traditional models based on a continuous belt heat source and those based on a discrete heat source,depending on whether the heat source is uniform and continuous.Through this examination,a more accurate grinding temperature model that closely aligns with practical grinding conditions is derived.Subsequently,various grinding thermal models are summarized,including models for the heat source distribution,energy distribution proportional coefficient,and convective heat transfer coefficient.Through comprehensive research,the most widely recognized,utilized,and accurate model for each category is identified.The application of these grinding thermal models is reviewed,shedding light on the governing laws that dictate the influence of the heat source distribution,heat distribution,and convective heat transfer in the grinding arc zone on the grinding temperature field.Finally,considering the current issues in the field of grinding temperature,potential future research directions are proposed.The aim of this study is to provide theoretical guidance and technical support for predicting workpiece temperature and improving surface integrity.

Experimental Study on the Thermal Performances of a Tube-Type Indirect Evaporative Cooler

The so-called indirect evaporative cooling technology is widely used in air conditioning applications.The thermal characterization of tube-type indirect evaporative coolers,however,still presents challenges which need to be addressed to make this technology more reliable and easy to implement.This experimental study deals with the performances of a tube-type indirect evaporative cooler based on an aluminum tube with a 10 mm diameter.In particular,the required tests were carried out considering a range of dry-bulb temperatures between 16℃ and 18℃ and a temperature difference between the wet-bulb and dry-bulb temperature of 2℃∼4℃.The integrated convective heat transfer coefficient inside the tube in the drenching condition has been found to lie in the range between 36.10 and 437.4(W/(m^(2)⋅K)).

COMPLEX HEAT TRANSFER ENHANCEMENT BY FLUID INDUCED VIBRATION

A new method of heat transfer enhancement by fluid induced vibration was putforward, and its theoretical a-nalysis and experimental study were performed. Though people alwaystry to prophylaxis fluid induced vibration for regarding it as an accident, the utilization space offluid induced vibration is still very large. The in-surface and out-surface vibrations which comefrom the fluid induce elastic tube bundles, can effectively increase the convective heat transfercoefficient, and also decrease the fouling resistance, then increase the heat transfer coefficientremarkably.

Theoretical and experimental advances on heat transfer and flow characteristics of metal foams

Open cell metal foam can be applied to greatly improve thermal performance of heat sink and heat exchanger,so that it has been widely used in the fields of thermal(or heat)control system of aerospace vehicle and energy utilization system and become a very important topic for research in the aerospace thermophysics field,and more and more attentions have been attracted.The optimal design of metal foam heat transfer devices is based on the understanding the flow and heat transfer characteristics in metal foam.This article reviews some recent progresses of theoretical and experimental researches on heat transfer enhancement and flow characteristics of metal foam.We found that the pore cell simplification models of metal foams generally fall into four categories,among which the most commonly used cell model is Kelivin model.Some exploratory works performed by the current authors are also introduced,such as the effect of boundary conditions on the heat transfer enhancement;the theoretical modelling of interfacial convective heat transfer taking into account heat conduction between foam ligaments;and the flow characteristics under relatively high velocity.The analytical results show that the flow characteristics of metal foam at relatively high speed are completely different from those at low speed,a further thorough study of the heat transfer and flow characteristics of metal foam is necessarily required.In this paper,two types of partial filling techniques are discussed.The heat transfer performance of partially filled tubes was evaluated by both the performance evaluation criteria and the performance evaluation plot of enhanced heat transfer techniques oriented for energy-saving.The results show that the filling type of metal foam have a significant impact on its heat transfer enhancement performance.Therefore,the filling method of metal foam should be further studied,in order to optimize the thermophysical properties of heat transfer devices.

Simulation of temperature field in pipe during single-face quenching process

Temperature-time curves were measured for the air cooling and laminar cooling of a steel plate.Convective heat transfer coefficients of steel plate and air as well as steel plate and laminar cooling water were computed inversely. Therefore,the temperature field in the single-face quenching process of a steel pipe was simulated using ABAQUS finite element softw are,and the relationships betw een the temperatures and quenching time at different positions of the steel pipe were obtained. In addition,the relationships betw een the cooling rates and quenching time,as w ell as betw een cooling rates and temperatures,were obtained. The simulation quickly produced accurate results,and it can be used to optimize the quenching process. In addition,the results provide a basis for rationally designing the composition of a single-face quenching steel pipe.

Numerical study of the influence of the atmospheric pressure on the thermal environment in the passenger cabin

The cabin air pressure remains lower than the horizontal atmospheric pressure when the airplane is in flight.Air pressure is one of the parameters that must be taken into consideration while studying the thermal environment of an airplane cabin.There are still no reference values for aircraft cabins despite the fact that numerous studies on low pressure heat transfer have demonstrated the connection between convective heat transfer coefficient(CHTC)and air pressure.In this paper,a correction method for CHTC under low pressure conditions was established by using the dummy heat dissipation in the low-pressure cabin experiment.On this basis,a thermal environment simulation model was developed,then was applied to the simulation of a seven-row aircraft cabin containing 42 passengers,and the CHTC and heat loss of dummy surface in the cabin were obtained.Finally,the results of PMV calculated by using heat dissipation and air parameters at sampling points were compared.The results show that the modified CHTC can accurately reflect the cabin thermal environment under low pressure conditions,and the correction of CHTC can be realized by adjusting the turbulent Prandtl number,which is nonlinear correlated with the pressure.The simulation results of the thermal environment in the seven-row cabin show that the CHTC changes by about 42%before and after modification.The air pressure decreases during take-off,which reduces the average CHTC of the crew surface from 5.09 W/(m^(2)·K)to 4.56 W/(m^(2)·K),but the air temperature rises by about 0.2°C as a whole.The deviation of PMV results calculated by using simulated heat loss data and using air parameters of measuring points in space is up to 0.5,but the latter is representative for calculating the thermal comfort level of the whole cabin.

Immersed liquid cooling Nd:YAG slab laser oscillator

An immersed liquid cooling slab laser is demonstrated with deionized water as the coolant and a Nd:YAG slab as the gain medium.Using waveguides,a highly uniform pump beam distribution is achieved,and the flow velocity distribution is also optimized in the channels of the gain module(GM).At various flow velocities,the convective heat transfer coefficient(CHTC)is obtained.Experimentally,a maximum output power of 434 W is obtained with an optical–optical efficiency of 27.1%and a slope efficiency of 36.6%.To the best of our knowledge,it is the highest output power of an immersed liquid cooling laser oscillator with a single Nd:YAG slab.

Analysis and Numerical Simulation of Forced Cooling in Induction Coils With High Current Density

A static model of the forced cooling of inductors used for induction heating is proposed in order to achieve better coil design to prolong its lifetime and prevent failures.The main aim is to define for the most common copper tubes and inductor geometries an equivalent convection heat transmission coefficient depending upon temperature and pressure of the cooling fluid,in order to model the very complex physics of forced cooling with a strongly simplified method.The model,called 'Line Region Model',considers only the coil's copper tube and its internal surface(interface copper-water)as boundary where the heat exchange conditions are imposed.