Sampled-data modeling and dynamical effect of output-capacitor time-constant for valley voltage-mode controlled buck-boost converter

By analyzing the output voltage ripple of a buck-boost converter with large equivalent series resistance（ESR） of output capacitor, one valley voltage-mode controller for buck-boost converter is proposed. Considering the fact that the increasing and decreasing slopes of the inductor current are assumed to be constant during each switching cycle, an especial sampleddata model of valley voltage-mode controlled buck-boost converter is established. Based on this model, the dynamical effect of an output-capacitor time-constant on the valley voltage-mode controlled buck-boost converter is revealed and analyzed via the bifurcation diagrams, the movements of eigenvalues, the Lyapunov exponent spectra, the boundary equations,and the operating-state regions. It is found that with gradual reduction of output-capacitor time-constant, the buck-boost converter in continuous conduction mode（CCM） shows the evolutive dynamic behavior from period-1 to period-2, period-4, period-8, chaos, and invalid state. The stability boundary and the invalidated boundary are derived theoretically by stability analysis, where the stable state of valley voltage-mode controlled buck-boost converter can enter into an unstable state, and the converter can shift from the operation region to a forbidden region. These results verified by time-domain waveforms and phase portraits of both simulation and experiment indicate that the sampled-data model is correct and the time constant of the output capacitor is a critical factor for valley voltage-mode controlled buck-boost converter, which has a significant effect on the dynamics as well as control stability.

Dynamical Behavior of V^2C Control Boost Converter

A discrete iterative map model of V^2C control boost converter was established to study the dynamical behaviors of the converter. By using parameter space map and bifurcation diagram, the effects of circuit parameters on the bifurcation behaviors of V^2C control and current-mode control boost converters were analyzed. The phase portraits and time-domain waveforms of the V^2C control boost converter were obtained by Runge-Kutta algorithm through piecewise smooth switching model. The research results indicate that V^2C control boost converters can evolve into periodic and chaotic behaviors, and show weaker nonlinear behaviors than current-mode control boost converters.

Resiliency oriented control of a smart microgrid with photovoltaic modules

The resiliency of a standalone microgrid is of considerable issue because the available regulation measures and capabilities are limited.Given this background,this paper presented a new mathematical model for a detailed photovoltaic(PV)module and the application of new control techniques for efficient energy extraction.The PV module employs a single-stage conversion method to integrate it with the utility grid.For extraction the maximum power from PV and integrate it to power grid,a three-phase voltage source converter is used.For obtaining the maximum power at a particular irradiance a maximum power point tracking(MPPT)scheme is used.The fuzzy logic control and adaptive network-based fuzzy inference system are proposed for direct current(DC)link voltage control.The proposed model and control scheme are validated through a comparison with the standard power-voltage and current-voltage charts for a PV module.Simulation results demonstrate that the system stability can be maintained with the power grid and in the island mode,in contrast with the MPPT.

Solar Energy System with Digital Controller for Grid Connected Systems

The solar photovoltaic （PV） module output voltage changes according to the variation of light intensity and temperature. This paper presents the implementation of an automatic digital controller of a DC-DC boost converter without batteries for a solar cell module by using a peripheral interface controller, which forms a closed loop, to control the ON-OFF period of the switching pulse. The output of DC-DC converter is maintained by automatically increasing or decreasing the pulse width. To produce the pulse width modulation （PWM）, the microcontroller is programmed according to the required duty cycle for the power switch. The PWM ON period is increased with the decrease in the PV voltage and vice-versa. The input voltage to the inverter is maintained constantly and is converted into an AC signal by using the metal-oxide-semiconductor field effect transistor （MOSFET） H-bridge operated in the sinusoidal pulse width modulation mode by using a PIC （peripheral interface controller） microcontroller. The generated AC signal can be connected to the AC grid or to the AC load. The simulated results by using Proteus 8 and hardware implemented results verify the effectiveness of the proposed controller.

Sliding mode control of reaction flywheel-based brushless DC motor with buck converter

Reaction flywheel is a significant actuator for satellites＇ attitude control. To improve output torque and rotational speed accuracy for reaction flywheel, this paper reviews the modeling and control approaches of DC-DC converters and presents an application of the variable structure system theory with associated sliding regimes. Firstly, the topology of reaction flywheel is constructed. The small signal linearization process for a buck converter is illustrated. Then, based on the state averaging models and reaching qualification expressed by the Lee derivative, the general results of the sliding mode control （SMC） are analyzed. The analytical equivalent control laws for reaction flywheel are deduced detailedly by selecting various sliding surfaces at electromotion, energy consumption braking, reverse connection braking stages. Finally, numerical and experimental examples are presented for illustrative purposes. The results demonstrate that favorable agreement is established between the simulations and experiments. The proposed control strategy achieves preferable rotational speed regulation, strong rejection of modest disturbances, and high-precision output torque and rotational speed tracking abilities.

DSP based fuzzy controller for series parallel resonant converter

In this paper, digital signal processor （DSP） based fuzzy controller for series parallel resonant converter （SPRC） has been estimated, and the performance of the converter is analyzed by using state space model. The method to predict the steady-state and dynamic perfor-mance of the converter with load independent operation has been presented. The proposed converter has been analyzed with the closed-loop and open-loop conditions. The simple form of transfer function for SPRC is developed, and it is used to analyze the stability of the converter with closed-loop operation. The stability analy-sis of the converter is carried out by using frequency response plan. The fuzzy controller regulates the output voltage with change supply voltage and load disturbance. The controller performance of inductance capacitance inductance - T network （LCL-T） SPRC is compared with inductance inductance capacitance - T network （LLC-T） SPRC through simulation TMS320F2407 processor. and experimental studies using

PI controller relay auto-tuning using delay and phase margin in PMSM drives

This paper presents an auto-tuning method for a proportion plus integral（PI） controller for permanent magnet synchronous motor（PMSM） drives, which is supposed to be embedded in electro-mechanical actuator（EMA） control module in aircraft. The method, based on a relay feedback with variable delay time, explores different critical points of the system frequency response.The Nyquist points of the plant can then be derived from the delay time and filter time constant.The coefficients of the PI controller can then be obtained by calculation while shifting the Nyquist point to a specific position to obtain the required phase margin. The major advantage of the autotuning method is that it can provide a series of tuning results for different system bandwidths and damping ratios, corresponding to the specification for delay time and phase margin. Simulation and experimental results for the PMSM controller verify the performance of both the current loop and the speed loop auto-tuning.