Personal Thermal Management by Radiative Cooling and Heating

Maintaining thermal comfort within the human body is crucial for optimal health and overall well-being.By merely broadening the setpoint of indoor temperatures,we could significantly slash energy usage in building heating,ventilation,and air-conditioning systems.In recent years,there has been a surge in advancements in personal thermal management(PTM),aiming to regulate heat and moisture transfer within our immediate surroundings,clothing,and skin.The advent of PTM is driven by the rapid development in nano/micro-materials and energy science and engineering.An emerging research area in PTM is personal radiative thermal management(PRTM),which demonstrates immense potential with its high radiative heat transfer efficiency and ease of regulation.However,it is less taken into account in traditional textiles,and there currently lies a gap in our knowledge and understanding of PRTM.In this review,we aim to present a thorough analysis of advanced textile materials and technologies for PRTM.Specifically,we will introduce and discuss the underlying radiation heat transfer mechanisms,fabrication methods of textiles,and various indoor/outdoor applications in light of their different regulation functionalities,including radiative cooling,radiative heating,and dual-mode thermoregulation.Furthermore,we will shine a light on the current hurdles,propose potential strategies,and delve into future technology trends for PRTM with an emphasis on functionalities and applications.

Exergetic Comparative Analysis of Ammonia and Carbon Dioxide Two-Stage Cycles for Simultaneous Cooling and Heating

The paper deals with the comparative analysis of the performance of cooling and heating systems operating with NH3 （ammonia） or CO2 （carbon dioxide）, both natural refrigerants. The study is based on the exergetic analysis that points out the location and the magnitude of a system malfunction. Both systems, with NH3 or CO2 operate in two stages. The exergetic analysis gives the direction of the structural optimization. The exergetic analysis has shown that the best structural schematic is not the same for the two agents. The exergetic analysis points out that the largest exergy destruction in the CO2 cycle is due to the throttling process and offers solutions to diminish it.

Comparison of life cycle performance of distributed energy system and conventional energy system for district heating and cooling in China

The distributed energy system has achieved significant attention in respect of its application for singlebuilding cooling and heating.Researching on the life cycle environmental impact of distributed energy systems(DES)is of great significance to encourage and guide the development of DES in China.However,the environmental performance of distributed energy systems in a building cooling and heating has not yet been carefully analyzed.In this study,based on the standards of ISO14040-2006 and ISO14044-2006,a life-cycle assessment(LCA)of a DES was conducted to quantify its environmental impact and a conventional energy system(CES)was used as the benchmark.GaBi 8 software was used for the LCA.And the Centre of Environmental Science(CML)method and Eco-indicator 99(EI 99)method were used for environmental impact assessment of midpoint and endpoint levels respectively.The results indicated that the DES showed a better life-cycle performance in the usage phase compared to the CES.The life-cycle performance of the DES was better than that of the CES both at the midpoint and endpoint levels in view of the whole lifespan.It is because the CES to DES indicator ratios for acidification potential,eutrophication potential,and global warming potential are 1.5,1.5,and 1.6,respectively at the midpoint level.And about the two types of impact indicators of ecosystem quality and human health at the endpoint level,the CES and DES ratios of the other indicators are greater than1 excepting the carcinogenicity and ozone depletion indicators.The human health threat for the DES was mainly caused by energy consumption during the usage phase.A sensitivity analysis showed that the climate change and inhalable inorganic matter varied by 1.3%and 6.1%as the electricity increased by 10%.When the natural gas increased by 10%,the climate change and inhalable inorganic matter increased by 6.3%and 3.4%,respectively.The human health threat and environmental damage caused by the DES could be significantly reduced by the optimization of natural gas and electricity consumption.

A small-scale silica gel-water adsorption system for domestic air conditioning and water heating by the recovery of solar energy

A small-scale silica gel-water adsorption system with modular adsorber,which utilizes solar energy to achieve the cogeneration of domestic air conditioning and water heating effect,is proposed and investigated in this paper.A heat recovery process between two adsorbers and a mass recovery process between two evaporators are adopted to improve the overall cooling and heating performance.First,the adsorption system is tested under different modes(different mass recovery,heat recovery,and cogeneration time)to determine the optimal operating conditions.Then,the cogeneration performance of domestic cooling and water heating effect is studied at different heat transfer fluid temperatures.The results show that the optimal time for cogeneration,mass recovery,and heat recovery are 600 s,40 s,and 40 s,respectively.When the inlet temperature of hot water is around 85℃,the largest cooling power and heating power are 8.25 kW and 21.94 kW,respectively.Under the condition of cooling water temperature of 35℃,the obtained maximum COP,COP,and SCP of the system are 0.59,1.39,and 184.5 W/kg,respectively.

Numerical simulation study on the hygrothermal performance of building exterior walls under dynamic wind-driven rain condition

Wind-driven rain(WDR)has a significant influence on the hygrothermal performance,durability,and energy consumption of building components.The calculation of WDR loads using semi-empirical models has been incorporated into the boundary conditions of coupled heat and moisture transfer models.However,prior research often relied on fixed WDR absorption ratio,which fail to accurately capture the water absorption characteristics of porous building materials under rainfall scenarios.Therefore,this study aims to investigate the coupled heat and moisture transfer of exterior walls under dynamic WDR boundary conditions,utilizing an empirically obtained WDR absorption ratio model based on field measurements.The developed coupled heat and moisture transfer model is validated against the HAMSTAD project.The findings reveal that the total WDR flux calculated with the dynamic WDR boundary is lower than that obtained with the fixed WDR boundary,with greater disparities observed in orientations experiencing higher WDR loads.The variations in moisture flow significantly impact the surface temperature and relative humidity of the walls,influencing the calculation of cooling and heating loads by different models.Compared to the transient heat transfer model,the coupled heat and moisture transfer model incorporating dynamic WDR boundary exhibits maximum increases of 17.6%and 16.2%in cooling and heating loads,respectively.The dynamic WDR boundary conditions provide more precise numerical values for surface moisture flux,offering valuable insights for the thermal design of building enclosures and load calculations for HVAC systems.

Performance in the Discharge Process of a Novel Zeolite-Water Adsorption Thermal Energy Storage System

In order to effectively recover low and medium grade heat energy,a novel combined cooling and heating storage system based on zeolite-water is proposed in this paper.The system coupled the zeolite-water adsorption process with the water evaporation refrigeration process during discharging process to realize generating cold energy and heat energy simultaneously.A more accurate kinetic model of zeolite and water adsorption is developed,and the thermodynamic performance of discharging process of the system is numerically analyzed.The results show the system has the higher energy conversion coefficient of 1.49 and the higher energy density of 1216.6 kJ/kg-zeolite.The change laws of system performances,such as energy generated,energy conversion coefficient and energy density,with key parameters during discharging process are revealed.The study provides a way for efficient utilization of low and medium grade heat energy.

Thermal Management of Electrified Propulsion System for Low-Carbon Vehicles

An overview of current thermal challenges in transport electrification is introduced in order to underpin the research developments and trends of recent thermal management techniques.Currently,explorations of intelligent thermal management and control strategies prevail among car manufacturers in the context of climate change and global warming impacts.Therefore,major cutting-edge systematic approaches in electrified powertrain are summarized in the first place.In particular,the important role of heating,ventilation and air-condition system(HVAC)is emphasised.The trends in developing efficient HVAC system for future electrified powertrain are analysed.Then electric machine efficiency is under spotlight which could be improved by introducing new thermal management techniques and strengthening the efforts of driveline integrations.The demanded integration efforts are expected to provide better value per volume,or more power output/torque per unit with smaller form factor.Driven by demands,major thermal issues of high-power density machines are raised including the comprehensive understanding of thermal path,and multiphysics challenges are addressed whilst embedding power electronic semiconductors,non-isotropic electromagnetic materials and thermal insulation materials.Last but not least,the present review has listed several typical cooling techniques such as liquid cooling jacket,impingement/spray cooling and immersion cooling that could be applied to facilitate the development of integrated electric machine,and a mechanic-electric-thermal holistic approach is suggested at early design phase.Conclusively,a brief summary of the emerging new cooling techniques is presented and the keys to a successful integration are concluded.