Group Hybrid Coordination Control of Multi-Agent Systems With Time-Delays and Additive Noises

A new kind of group coordination control problemgroup hybrid coordination control is investigated in this paper.The group hybrid coordination control means that in a whole multi-agent system(MAS)that consists of two subgroups with communications between them,agents in the two subgroups achieve consensus and containment,respectively.For MASs with both time-delays and additive noises,two group control protocols are proposed to solve this problem for the containment-oriented case and consensus-oriented case,respectively.By developing a new analysis idea,some sufficient conditions and necessary conditions related to the communication intensity betw een the two subgroups are obtained for the following two types of group hybrid coordination behavior:1)Agents in one subgroup and in another subgroup achieve weak consensus and containment,respectively;2)Agents in one subgroup and in another subgroup achieve strong consensus and containment,respectively.It is revealed that the decay of the communication impact betw een the two subgroups is necessary for the consensus-oriented case.Finally,the validity of the group control results is verified by several simulation examples.

An Overview of Research in Distributed Attitude Coordination Control

This paper provides an overview of attitude coordination problems of multi-rigid-body with the goal of promoting research in this area. Theoretical results regarding consensus seeking with different system models, different communication topologies, different control goals and different techniques are summarized. And applications of consensus protocols to multirigid-body coordination are investigated. Finally, some future research directions and open problems are also proposed.

Coordination Control Method for Preventing Sub/Super Synchronous Oscillations of Multi-wind Farm Systems

In recent years,sub/super-synchronous oscillations occur frequently in large-scale wind power bases throughout China.Since the oscillation frequencies are close to the fundamental frequency,the current components can spread over a large area,and may destroy the shafting of rotating devices in the power grid.Improving the control strategy and parameters of wind turbines can prevent this problem to some extent,however,due to complex operational conditions and continuous development of wind power,the off-line improvement measures on wind turbines cannot eliminate the potential oscillation risks.This paper proposes an oscillation risk screening and stability assessment method,and develops a coordination control method for large-scale wind farm systems to prevent sub/supersynchronous oscillations.The Nyquist criterion and the modal analysis method are combined to generate quantitative factors for the stability assessment and the control strategy design.The coordination control method consists of minute-level power coordinated allocation and second-level fast power control to prevent and eliminate the oscillations.A detailed simulation model of a multiple wind farms system originated from an actual wind power base in China is presented to verify the effectiveness of the proposed method.

Multi-UAV coordination control by chaotic grey wolf optimization based distributed MPC with event-triggered strategy

The paper proposes a new swarm intelligence-based distributed Model Predictive Control(MPC)approach for coordination control of multiple Unmanned Aerial Vehicles(UAVs).First,a distributed MPC framework is designed and each member only shares the information with neighbors.The Chaotic Grey Wolf Optimization(CGWO)method is developed on the basis of chaotic initialization and chaotic search to solve the local Finite Horizon Optimal Control Problem(FHOCP).Then,the distributed cost function is designed and integrated into each FHOCP to achieve multi-UAV formation control and trajectory tracking with no-fly zone constraint.Further,an event-triggered strategy is proposed to reduce the computational burden for the distributed MPC approach,which considers the predicted state errors and the convergence of cost function.Simulation results show that the CGWO-based distributed MPC approach is more computationally efficient to achieve multi-UAV coordination control than traditional method.

A dynamic signal coordination control method for urban arterial roads and its application

We propose a novel dynamic traffic signal coordination method that takes account of the special traffic flow characteristics of urban arterial roads. The core of this method includes a control area division module and a signal coordination control module. Firstly, we analyze and model the influences of segment distance, traffic flow density, and signal cycle time on the correlation degree between two neighboring intersections. Then, we propose a fuzzy computing method to estimate the correlation degree based on a hierarchical structure and a method to divide the control area of urban arterial roads into subareas based on correlation degrees. Subarea coordination control arithmetic is used to calculate the public cycle time of the control subarea, up-run offset and down-run offset of the section, and the split of each intersection. An application of the method in Shaoxing City, Zhejiang Province, China shows that the method can reduce the average travel time and the average stop rate effectively.

Optimal Coordination Control Strategy of Hybrid Energy Storage Systems for Tie-line Smoothing Services in Integrated Community Energy Systems

Increasing renewable energy penetration into integrated community energy systems(ICESs)requires more efficient methods to prevent power fluctuations of the tie–line(connection of the ICESs to the main grid).In this paper,centrally-controlled air conditioners are considered as a virtual energy storage system(VESS).The optimal thermostat regulation is used to manage the charging/discharging power of the VESS within the customer comfort level range and the virtual state of charge(VSOC)is used to describe the charging/discharging power of the VESS.On this basis,the model of the hybrid energy storage system is built with a VESS and a battery storage system(BSS).Then,an optimal coordination control strategy(OCCS)for a hybrid energy storage system is developed considering the state-space equation to describe the OCCS,the constraints of the OCCS,and the objective function to express the optimal coordination control performance.Finally,the influence of the outdoor temperature and the deadband of air conditioners on the results of the OCCS is analyzed.Results show that the OCCS can realize optimal allocation of the storage response amount to trace the reference target accurately and guarantee both the state of charge(SOC)of the batteries in a reasonable range to prolong the battery life and ensure the level of comfort experienced by users.

Adaptive coordination control strategy of renewable energy sources,hydrogen production unit,and fuel celi for frequency regulation of a hybrid distributed power system

Owing to the significant number of hybrid generation systems(HGSs)containing various energy sources,coordina-tion between these sources plays a vital role in preserving frequency stability.In this paper,an adaptive coordination control strategy for renewable energy sources(RESs),an aqua electrolyzer(AE)for hydrogen production,and a fuel cell(FC)-based energy storage system(ESS)is proposed to enhance the frequency stability of an HGS.In the proposed system,the excess energy from RESs is used to power electrolysis via an AE for hydrogen energy storage in FCs.The proposed method is based on a proportional-integral(Pl)controller,which is optimally designed using a grey wolf optimization(GWO)algorithm to estimate the surplus energy from RESs(ie,a proportion of total power generation of RESs:Kn).The studied HGS contains various types of generation systems including a diesel generator,wind tur-bines,photovoltaic(PV)systems,AE with FCs,and ESSs(e.g.,battery and flywheel).The proposed method varies Kn with varying frequency deviation values to obtain the best benefits from RESs,while damping the frequency fluc-tuations.The proposed method is validated by considering different loading conditions and comparing with other existing studies that consider Kn as a constant value.The simulation results demonstrate that the proposed method,which changes Kn value and subsequently stores the power extracted from the RESs in hydrogen energy storage according to frequency deviation changes,performs better than those that use constant Kn.The statistical analysis for frequency deviation of HGS with the proposed method has the best values and achieves large improvements for minimum,maximum,difference between maximum and minimum,mean,and standard deviation compared to the existing method.

Multi-objective Coordination Control of Distributed Power Flow Controller

In this paper,distributed power flow controller(DPFC)constraints are analyzed.The energy balance relationship between fundamental wave and third harmonic in series and shunt-side converter is deduced.A proportional integral(PI)controller of the DPFC is constructed.The PI controller uses the voltage amplitude and phase angle injected into the system in the series side,along with the modulation ratio of the three-phase converter on the shunt side as the control variables.A multiobjective coordinated control equation is proposed,which factors the constraints of the energy balance between series and shunt side,device capacity limit,safe operation limit,fundamental component,as well as third harmonic component of the injection voltage at the series side.The equation minimizes the variance between the actual value of the control target and its given value to ensure that the DC capacitor voltage,both in the series and shunt side,is stable at target value.Simulations are conducted to verify correctness and effectiveness of the proposed control method.

Tracking Control of Multi-Agent Systems Using a Networked Predictive PID Tracking Scheme

With the rapid development of network technology and control technology,a networked multi-agent control system is a key direction of modern industrial control systems,such as industrial Internet systems.This paper studies the tracking control problem of networked multi-agent systems with communication constraints,where each agent has no information on the dynamics of other agents except their outputs.A networked predictive proportional integral derivative(PPID)tracking scheme is proposed to achieve the desired tracking performance,compensate actively for communication delays,and simplify implementation in a distributed manner.This scheme combines the past,present and predictive information of neighbour agents to form a tracking error signal for each agent,and applies the proportional,integral,and derivative of the agent tracking error signal to control each individual agent.The criteria of the stability and output tracking consensus of multi-agent systems with the networked PPID tracking scheme are derived through detailed analysis on the closed-loop systems.The effectiveness of the networked PPID tracking scheme is illustrated via an example.

Novel ARC-Fuzzy Coordinated Automatic Tracking Control of Four-Wheeled Mobile Robot

Four-wheeled,individual-driven,nonholonomic structured mobile robots are widely used in industries for automated work,inspection and explora-tion purposes.The trajectory tracking control of the four-wheel individual-driven mobile robot is one of the most blooming research topics due to its nonholonomic structure.The wheel velocities are separately adjusted to follow the trajectory in the old-fashioned kinematic control of skid-steered mobile robots.However,there is no consideration for robot dynamics when using a kinematic controller that solely addresses the robot chassis’s motion.As a result,the mobile robot has lim-ited performance,such as chattering during curved movement.In this research work,a three-tiered adaptive robust control with fuzzy parameter estimation,including dynamic modeling,direct torque control and wheel slip control is pro-posed.Fuzzy logic-based parameter estimation is a valuable tool for adjusting adaptive robust controller(ARC)parameters and tracking the trajectories with less tracking error as well as high tracking accuracy.This research considers the O type and 8 type trajectories for performance analysis of the proposed novel control technique.Our suggested approach outperforms the existing control methods such as Fuzzy,proportional–integral–derivative(PID)and adaptive robust controller with discrete projection(ARC–DP).The experimental results show that the scheduled performance index decreases by 2.77%and 4.76%.All the experimen-tal simulations obviously proved that the proposed ARC-Fuzzy performed well in smooth groud surfaces compared to other approaches.

State coordinated voltage control in an active distribution network with on-load tap changers and photovoltaic systems

Decreasing costs and favorable policies have resulted in increased penetration of solar photovoltaic(PV)power generation in distribution networks.As the PV systems penetration is likely to increase in the future,utilizing the reactive power capability of PV inverters to mitigate voltage deviations is being promoted.In recent years,droop control of inverter-based distributed energy resources has emerged as an essential tool for use in this study.The participation of PV systems in voltage regulation and its coordination with existing controllers,such as on-load tap changers,is paramount for controlling the voltage within specified limits.In this work,control strategies are presented that can be coordinated with the existing controls in a distributed manner.The effectiveness of the proposed method was demonstrated through simulation results on a distribution system.

Chassis Coordinated Control for Full X-by-Wire Vehicles-A Review

An X-by-wire chassis can improve the kinematic characteristics of human-vehicle closed-loop system and thus active safety especially under emergency scenarios via enabling chassis coordinated control.This paper aims to provide a complete and systematic survey on chassis coordinated control methods for full X-by-wire vehicles,with the primary goal of summarizing recent reserch advancements and stimulating innovative thoughts.Driving condition identification including driver’s operation intention,critical vehicle states and road adhesion condition and integrated control of X-by-wire chassis subsystems constitute the main framework of a chassis coordinated control scheme.Under steering and braking maneuvers,different driving condition identification methods are described in this paper.These are the trigger conditions and the basis for the implementation of chassis coordinated control.For the vehicles equipped with steering-by-wire,braking-by-wire and/or wire-controlled-suspension systems,state-of-the-art chassis coordinated control methods are reviewed including the coordination of any two or three chassis subsystems.Finally,the development trends are discussed.

Coordinate Control,Motion Optimization and Sea Experiment of a Fleet of Petrel-Ⅱ Gliders

The formation of hybrid underwater gliders has advantages in sustained ocean observation with high resolution and more adaptation for complicated ocean tasks. However, the current work mostly focused on the traditional gliders and AUVs.The research on control strategy and energy consumption minimization for the hybrid gliders is necessary both in methodology and experiment. A multi-layer coordinate control strategy is developed for the fleet of hybrid underwater gliders to control the gliders' motion and formation geometry with optimized energy consumption. The inner layer integrated in the onboard controller and the outer layer integrated in the ground control center or the deck controller are designed. A coordinate control model is proposed based on multibody theory through adoption of artificial potential fields. Considering the existence of ocean flow, a hybrid motion energy consumption model is constructed and an optimization method is designed to obtain the heading angle, net buoyancy, gliding angle and the rotate speed of screw propeller to minimize the motion energy with consideration of the ocean flow. The feasibility of the coordinate control system and motion optimization method has been verified both by simulation and sea trials. Simulation results show the regularity of energy consumption with the control variables. The fleet of three Petrel-Ⅱ gliders developed by Tianjin University is deployed in the South China Sea. The trajectory error of each glider is less than 2.5 km, the formation shape error between each glider is less than 2 km, and the difference between actual energy consumption and the simulated energy consumption is less than 24% actual energy. The results of simulation and the sea trial prove the feasibility of the proposed coordinate control strategy and energy optimization method. In conclusion, a coordinate control system and a motion optimization method is studied, which can be used for reference in theoretical research and practical fleet operation for both the traditional gliders and hybrid gliders.

Constrained Power Plant Coordinated Predictive Control Using Neurofuzzy Model

In unit steam-boiler generation, a coordinated control strategy is required to ensure a higher rate of load change without violating thermal constraints. The process is characterized by nonlinearity and uncertainty. While neural networks can model highly complex nonlinear dynamical systems, they produce black box models. This has led to significant interest in neuro-fuzzy networks (NFNs) to represent a nonlinear dynamical process by a set of locally valid and simpler submodels. Two alternative methods of exploiting the NFNs within a generalised predictive control (GPC) framework for nonlinear model predictive control are described. Coordinated control of steam-boiler generation using the two nonlinear GPC methods show excellent tracking and disturbance rejection results and improved performance compared with conventional linear GPC.

Adaptive sliding mode control of modular self-reconfigurable spacecraft with time-delay estimation

The reconstruction control of modular self-reconfigurable spacecraft (MSRS) is addressed using an adaptive sliding mode control (ASMC) scheme based on time-delay estimation (TDE) technology. In contrast to the ground, the base of the MSRS is floating when assembled in orbit, resulting in a strong dynamic coupling effect. A TED-based ASMC technique with exponential reaching law is designed to achieve high-precision coordinated control between the spacecraft base and the robotic arm. TDE technology is used by the controller to compensate for coupling terms and uncertainties, while ASMC can augment and improve TDE’s robustness. To suppress TDE errors and eliminate chattering, a new adaptive law is created to modify gain parameters online, ensuring quick dynamic response and high tracking accuracy. The Lyapunov approach shows that the tracking errors are uniformly ultimately bounded (UUB). Finally, the on-orbit assembly process of MSRS is simulated to validate the efficacy of the proposed control scheme. The simulation results show that the proposed control method can accurately complete the target module’s on-orbit assembly, with minimal perturbations to the spacecraft’s attitude. Meanwhile, it has a high level of robustness and can effectively eliminate chattering.

Research on SFLA-Based Bidirectional Coordinated Control Strategy for EV Battery Swapping Station

As a good measure to tackle the challenges from energy shortages and environmental pollution,Electric Vehicles(EVs)have entered a period of rapid growth.Battery swapping station is a very important way of energy supply to EVs,and it is urgently needed to explore a coordinated control strategy to effectively smooth the load fluctuation in order to adopt the large-scale EVs.Considering bidirectional power flow between the station and power grid,this paper proposed a SFLA-based control strategy to smooth the load profile.Finally,compared simulations were performed according to the related data.Compared to particle swarm optimization(PSO)method,the presented SFLA-based strategy can effectively lower the peak-valley difference with the faster convergence rate and higher convergence precision.It is important for the swapping station that energy exchanging mode can supply energy for large-scale EVs with a smoother load profile than one-way charging mode.

Disturbance observer based finite-time coordinated attitude tracking control for spacecraft on SO(3)

To solve the problem of attitude synchronization control for spacecraft formation flying(SFF)suffering from external disturbances under a directed communication topology,a sliding mode disturbance observer(SMDO)based on the finite-time control strategy is developed to observe the time-varying external disturbance via estimating the upper bound of its first derivative.Meanwhile,the rotation matrix is employed to describe the attitude of SFF for the purpose of the avoidance of singularity and unwinding phenomenon.As for the attitude synchronization and the tracking control architecture,a sliding mode surface(SMS)is given such that the control objective can be achieved.The effectiveness and the validity of the proposed method are elaborated via theoretical analysis and numerical simulations.

Combined Control Allocation and Sliding Mode Control in the Dynamic Control of a Vehicle with Eight In-Wheel Motors

An eight wheel independently driving steering(8 WIDBS)electric vehicle is studied in this paper.The vehicle is equipped with eight in-wheel motors and a steer-by-wire system.A hierarchically coordinated vehicle dynamic control(HCVDC)system,including a high-level vehicle motion controller,a control allocation,an inverse tire model and a lower-level slip/slip angle controller,is proposed for the over-actuated vehicle system.The high-level sliding mode vehicle motion controller is designed to produce desired total forces and yaw moment,distributed to longitudinal and lateral forces of each tire by an advanced control allocation method.And the slip controller is designed to use a sliding mode control method to follow the desired slip ratios by manipulating the corresponding in-wheel motor torques.Evaluation of the overall system is accomplished by sine maneuver simulation.Simulation results confirm that the proposed control system can coordinate among the redundant and constrained actuators to achieve the vehicle dynamic control task and improve the vehicle stability.

Construction and Implementation Approaches of Ecological Compensation Mechanism for Coordinated Control of Air Pollution in Beijing-Tianjin-Hebei Region

The spatial spillover of air pollution in Beijing-Tianjin-Hebei region makes the territorial governance model inefficient.At the same time,it is facing the contradiction between environmental governance and economic development.So far,there is still no regional long-term mechanism for coordinated governance of air pollution.Ecological compensation theory is becoming an effective guiding theory to coordinate economic and environmental benefits.There is relatively little research on ecological compensation mechanism in the coordinated control of regional air pollution.Ecological compensation mechanism is an effective tool to promote air pollution control.At the same time,regional cooperation can realize the efficient control of air pollution.Scientifically constructing the cross regional cooperative control model of Beijing,Tianjin and Hebei is a favorable way to implement comprehensive control of air pollution.This paper discusses the necessity of ecological compensation mechanism for regional coordinated control of air pollution.Referring to practical experience of provinces and cities that have implemented the ecological compensation mechanism for air pollution control,and the effective way to distribute the compensation amount,compensation subject and compensation standard determination method that can be implemented in Beijing-Tianjin-Hebei region are analyzed,further proposing an effective way to establish an ecological compensation mechanism for regional air pollution collaborative control according to its reality.

Coordinated voltage control of renewable energy power plants in weak sending-end power grid

The utilization of renewable energy in sending-end power grids is increasing rapidly,which brings difficulties to voltage control.This paper proposes a coordinated voltage control strategy based on model predictive control(MPC)for the renewable energy power plants of wind and solar power connected to a weak sending-end power grid(WSPG).Wind turbine generators(WTGs),photovoltaic arrays(PVAs),and a static synchronous compensator are coordinated to maintain voltage within a feasible range during operation.This results in the full use of the reactive power capability of WTGs and PVAs.In addition,the impact of the active power outputs of WTGs and PVAs on voltage control are considered because of the high R/X ratio of a collector system.An analytical method is used for calculating sensitivity coefficients to improve computation efficiency.A renewable energy power plant with 80 WTGs and 20 PVAs connected to a WSPG is used to verify the proposed voltage control strategy.Case studies show that the coordinated voltage control strategy can achieve good voltage control performance,which improves the voltage quality of the entire power plant.