Group Hybrid Coordination Control of Multi-Agent Systems With Time-Delays and Additive Noises

A new kind of group coordination control problemgroup hybrid coordination control is investigated in this paper.The group hybrid coordination control means that in a whole multi-agent system(MAS)that consists of two subgroups with communications between them,agents in the two subgroups achieve consensus and containment,respectively.For MASs with both time-delays and additive noises,two group control protocols are proposed to solve this problem for the containment-oriented case and consensus-oriented case,respectively.By developing a new analysis idea,some sufficient conditions and necessary conditions related to the communication intensity betw een the two subgroups are obtained for the following two types of group hybrid coordination behavior:1)Agents in one subgroup and in another subgroup achieve weak consensus and containment,respectively;2)Agents in one subgroup and in another subgroup achieve strong consensus and containment,respectively.It is revealed that the decay of the communication impact betw een the two subgroups is necessary for the consensus-oriented case.Finally,the validity of the group control results is verified by several simulation examples.

Tracking Control of Multi-Agent Systems Using a Networked Predictive PID Tracking Scheme

With the rapid development of network technology and control technology,a networked multi-agent control system is a key direction of modern industrial control systems,such as industrial Internet systems.This paper studies the tracking control problem of networked multi-agent systems with communication constraints,where each agent has no information on the dynamics of other agents except their outputs.A networked predictive proportional integral derivative(PPID)tracking scheme is proposed to achieve the desired tracking performance,compensate actively for communication delays,and simplify implementation in a distributed manner.This scheme combines the past,present and predictive information of neighbour agents to form a tracking error signal for each agent,and applies the proportional,integral,and derivative of the agent tracking error signal to control each individual agent.The criteria of the stability and output tracking consensus of multi-agent systems with the networked PPID tracking scheme are derived through detailed analysis on the closed-loop systems.The effectiveness of the networked PPID tracking scheme is illustrated via an example.

State coordinated voltage control in an active distribution network with on-load tap changers and photovoltaic systems

Decreasing costs and favorable policies have resulted in increased penetration of solar photovoltaic(PV)power generation in distribution networks.As the PV systems penetration is likely to increase in the future,utilizing the reactive power capability of PV inverters to mitigate voltage deviations is being promoted.In recent years,droop control of inverter-based distributed energy resources has emerged as an essential tool for use in this study.The participation of PV systems in voltage regulation and its coordination with existing controllers,such as on-load tap changers,is paramount for controlling the voltage within specified limits.In this work,control strategies are presented that can be coordinated with the existing controls in a distributed manner.The effectiveness of the proposed method was demonstrated through simulation results on a distribution system.

Finite-time coordination control for formation flying spacecraft

This paper investigates a distributed coordination control scheme using an adaptive terminal sliding mode for formation flying spacecraft with coupled attitude and translational dynamics. In order to overcome the singularity of the traditional fast terminal sliding manifold, a novel fast terminal sliding manifold is given. And then, based on the adaptive control method, a continuous robust coordinated controller is designed to compensate external disturbances and to alleviate the chattering phenomenon. The theoretical analysis shows that the coordinated controller can guarantee the finite-time stability of the overall closed-loop system through local information exchange, and numerical simulations also demonstrate its effectiveness.

Coordination Control of Greenhouse Environmental Factors

Optimal control of greenhouse climate is one of the key techniques in digital agriculture.Greenhouse climate,a nonlinear and uncertain system,consists of several major environmental factors such as temperature,humidity,light intensity,and CO 2 concentration.Due to the complex coupled correlations,it is a challenge to achieve coordination control of greenhouse environmental factors.This paper proposes a model-free coordination control approach for greenhouse environmental factors based on Q-learning.Coordination control policy is found through systematic interaction with the dynamic environment to achieve optimal control for greenhouse climate with the control cost constraints.In order to decrease systematic trial-and-error risk and reduce the computational complexity in Q-learning algorithm,case-based reasoning （CBR） is seamlessly incorporated into the Q-learning process.The experimental results demonstrate that this approach is practical,highly effective and efficient.

An Overview of Research in Distributed Attitude Coordination Control

This paper provides an overview of attitude coordination problems of multi-rigid-body with the goal of promoting research in this area. Theoretical results regarding consensus seeking with different system models, different communication topologies, different control goals and different techniques are summarized. And applications of consensus protocols to multirigid-body coordination are investigated. Finally, some future research directions and open problems are also proposed.

Control method on serial type pump-valve coordinated electro-hydraulic servo system

In order to compromise the conflicts between control accuracy and system efficiency of conventional electro-hydraulic servo systems,a novel pump-valve coordinated electro-hydraulic servo system was designed and a corresponding control strategy was proposed.The system was constituted of a pumpcontrolled part and a valve-controlled part,the pump controlled part is used to adjust the flow rate of oil source and the valve controlled part is used to complete the position tracking control of the hydraulic cylinder.Based on the system characteristics,a load flow grey prediction method was adopted in the pump controlled part to reduce the system overflow losses,and an adaptive robust control method was adopted in the valve controlled part to eliminate the effect of system nonlinearity and parametric uncertainties due to variable hydraulic parameters and system loads on the control precision.The experimental results validated that the adopted control strategy increased the system efficiency obviously with guaranteed high control accuracy.

Coordinated nonlinear robust control of TCSC and excitation for multi-machine systems

An advanced nonlinear robust control scheme is proposed for multi-machine power systems equipped with thyristor-controlled series compensation (TCSC). First, a decentralized nonlinear robust control approach based on the feedback linearization and H∞ theory is introduced to eliminate the nonlinearities and interconnections of the studied system, and to attenuate the exogenous disturbances that enter die system. Then, a system model is built up, which has considered all the generators’ and TCSC’s dynamics, and the effects of uncertainties such as disturbances. Next, a decentralized nonlinear robust coordinated control law is developed based on this model. Simulation results on a six-machine power system show that the transient stability of the power system is obviously improved and die power transfer capacity of long distance transmission lines is enhanced regardless of fault locations and system operation points. In addition, the control law has engineering practicality since all the variables in the expression of he control strategy can be measured locally.

Novel ARC-Fuzzy Coordinated Automatic Tracking Control of Four-Wheeled Mobile Robot

Four-wheeled,individual-driven,nonholonomic structured mobile robots are widely used in industries for automated work,inspection and explora-tion purposes.The trajectory tracking control of the four-wheel individual-driven mobile robot is one of the most blooming research topics due to its nonholonomic structure.The wheel velocities are separately adjusted to follow the trajectory in the old-fashioned kinematic control of skid-steered mobile robots.However,there is no consideration for robot dynamics when using a kinematic controller that solely addresses the robot chassis’s motion.As a result,the mobile robot has lim-ited performance,such as chattering during curved movement.In this research work,a three-tiered adaptive robust control with fuzzy parameter estimation,including dynamic modeling,direct torque control and wheel slip control is pro-posed.Fuzzy logic-based parameter estimation is a valuable tool for adjusting adaptive robust controller(ARC)parameters and tracking the trajectories with less tracking error as well as high tracking accuracy.This research considers the O type and 8 type trajectories for performance analysis of the proposed novel control technique.Our suggested approach outperforms the existing control methods such as Fuzzy,proportional–integral–derivative(PID)and adaptive robust controller with discrete projection(ARC–DP).The experimental results show that the scheduled performance index decreases by 2.77%and 4.76%.All the experimen-tal simulations obviously proved that the proposed ARC-Fuzzy performed well in smooth groud surfaces compared to other approaches.

Dual sliding mode coordinated control of manipulator grasping system with visual assistance

The operation efficiency of the manipulator is placed in the primary position in automatic production. This paper proposes a coordinated control strategy for joint servo and visual servo to enable timely transfer and accurate gripping in the working area. Aiming at the issues of chattering and slow convergence of traditional sliding mode controller, a fast variable power reaching rate on the basis of the non-singular fast terminal sliding mode controller is proposed, which can effectively reduce the convergence time and chattering. For the purpose of addressing the problem that the traditional visual servo control method is sensitive to the environment, a visual servo controller based on integral sliding mode is proposed, to ensure the favorable positioning accuracy of the manipulator. Based on the two proposed controllers mentioned above, a coordinated control strategy is used to implement the control of the manipulator. Finally, the upper computer software is developed using the C# programming language to monitor the workstation. The feasibility of the above-mentioned method is verified through multiple simulations and experiments.

Distributed Fault-Tolerant Control of Uncertain Multi-Agent Systems with Connectivity Maintenance

In this paper,a distributed cooperative control protocol is presented to deal with actuator failures of multi-agent systems in the presence of connectivity preservation.With the developed strategy,each agent can track the reference trajectory of the leader in the presence of actuator failures,disturbances and uncertainties.The connectivity of the multi-agent system can always be ensured during the control process.To achieve the aforementioned control objectives,a potential function is introduced to the distributed adaptive fault-tolerant control algorithm to preserve the initial connected network among the agents.The uncertainty of the multi-agent system,which is allowed to be described by discontinuous functions,is approximated and compensated using the fuzzy logic system.The asymptotic stability of the closed-loop system is demonstrated through the use of Cellina’s approximate selection theorem of nonsmooth analysis.Due to the developed adaptive laws,the upper bound of the disturbance is allowed to be uncertain,which facilitates the implementation of the control scheme.Finally,simulation results are provided to verify the effectiveness of the proposed control scheme.

Coordination Control Method for Preventing Sub/Super Synchronous Oscillations of Multi-wind Farm Systems

In recent years,sub/super-synchronous oscillations occur frequently in large-scale wind power bases throughout China.Since the oscillation frequencies are close to the fundamental frequency,the current components can spread over a large area,and may destroy the shafting of rotating devices in the power grid.Improving the control strategy and parameters of wind turbines can prevent this problem to some extent,however,due to complex operational conditions and continuous development of wind power,the off-line improvement measures on wind turbines cannot eliminate the potential oscillation risks.This paper proposes an oscillation risk screening and stability assessment method,and develops a coordination control method for large-scale wind farm systems to prevent sub/supersynchronous oscillations.The Nyquist criterion and the modal analysis method are combined to generate quantitative factors for the stability assessment and the control strategy design.The coordination control method consists of minute-level power coordinated allocation and second-level fast power control to prevent and eliminate the oscillations.A detailed simulation model of a multiple wind farms system originated from an actual wind power base in China is presented to verify the effectiveness of the proposed method.

Chassis Coordinated Control for Full X-by-Wire Vehicles-A Review

An X-by-wire chassis can improve the kinematic characteristics of human-vehicle closed-loop system and thus active safety especially under emergency scenarios via enabling chassis coordinated control.This paper aims to provide a complete and systematic survey on chassis coordinated control methods for full X-by-wire vehicles,with the primary goal of summarizing recent reserch advancements and stimulating innovative thoughts.Driving condition identification including driver’s operation intention,critical vehicle states and road adhesion condition and integrated control of X-by-wire chassis subsystems constitute the main framework of a chassis coordinated control scheme.Under steering and braking maneuvers,different driving condition identification methods are described in this paper.These are the trigger conditions and the basis for the implementation of chassis coordinated control.For the vehicles equipped with steering-by-wire,braking-by-wire and/or wire-controlled-suspension systems,state-of-the-art chassis coordinated control methods are reviewed including the coordination of any two or three chassis subsystems.Finally,the development trends are discussed.

Coordinate Control,Motion Optimization and Sea Experiment of a Fleet of Petrel-Ⅱ Gliders

The formation of hybrid underwater gliders has advantages in sustained ocean observation with high resolution and more adaptation for complicated ocean tasks. However, the current work mostly focused on the traditional gliders and AUVs.The research on control strategy and energy consumption minimization for the hybrid gliders is necessary both in methodology and experiment. A multi-layer coordinate control strategy is developed for the fleet of hybrid underwater gliders to control the gliders’ motion and formation geometry with optimized energy consumption. The inner layer integrated in the onboard controller and the outer layer integrated in the ground control center or the deck controller are designed. A coordinate control model is proposed based on multibody theory through adoption of artificial potential fields. Considering the existence of ocean flow, a hybrid motion energy consumption model is constructed and an optimization method is designed to obtain the heading angle, net buoyancy, gliding angle and the rotate speed of screw propeller to minimize the motion energy with consideration of the ocean flow. The feasibility of the coordinate control system and motion optimization method has been verified both by simulation and sea trials. Simulation results show the regularity of energy consumption with the control variables. The fleet of three Petrel-Ⅱ gliders developed by Tianjin University is deployed in the South China Sea. The trajectory error of each glider is less than 2.5 km, the formation shape error between each glider is less than 2 km, and the difference between actual energy consumption and the simulated energy consumption is less than 24% actual energy. The results of simulation and the sea trial prove the feasibility of the proposed coordinate control strategy and energy optimization method. In conclusion, a coordinate control system and a motion optimization method is studied, which can be used for reference in theoretical research and practical fleet operation for both the traditional gliders and hybrid gliders.

Review on key technologies and typical applications of multi-station integrated energy systems

To realize the low-carbon development of power systems,digital transformation,and power marketization reform,the substation,data center,energy storage,photovoltaic,and charging stations are important components for the construction of new infrastructure.The integration infrastructure represented by multi-station integrated energy systems(MSIESs)represents the development trend,and its connotation and denotation are not immutable.This study firstly analyzed the components of MSIESs and their sub-stations and overall characteristics,and proposed an overall architecture for MSIESs.Thereafter,this system was characterized in detail from three aspects:planning and design,operation control,and market operation.The planning and construction of MSIESs was analyzed from the aspects of planning and design process,typical fusion subsystems,supply and demand prediction,and capacity determination;the operational control of MSIESs was analyzed from the aspects of model construction,coordination control,and safety assessment.Moreover,the market operation of MSIESs was examined from the aspects of the business model and spot market.Furthermore,the technical development trend of MSIESs has been explored in this study.

Motion Planning Based Coordinated Control for Hydraulic Excavators

Hydraulic excavator is one type of the most widely applied construction equipment for various applications mainly because of its versatility and mobility. Among the tasks performed by a hydraulic excavator, repeatable level digging or flat surface finishing may take a large percentage. Using automated functions to perform such repeatable and tedious jobs will not only greatly increase the overall productivity but more importantly also improve the operation safety. For the purpose of investigating the technology without loss of generality, this research is conducted to create a coordinate control method for the boom, arm and bucket cylinders on a hydraulic excavator to perform accurate and effective works. On the basis of the kinematic analysis of the excavator linkage system, the tip trajectory of the end-effector can be determined in terms of three hydraulic cylinders coordinated motion with a visualized method. The coordination of those hydraulic cylinders is realized by controlling three electro-hydraulic proportional valves coordinately. Therefore, the complex control algorithm of a hydraulic excavator can be simplified into coordinated motion control of three individual systems. This coordinate control algorithm was validated on a wheeled hydraulic excavator, and the validation results indicated that this developed control method could satisfactorily accomplish the auto-digging function for level digging or flat surface finishing.

Adaptive coordinated control of engine speed and battery charging voltage

In this paper, the control problem of auxiliary power unit （APU） for hybrid electric vehicles is investigated. An adaptive controller is provided to achieve the coordinated control between the engine speed and the battery charging voltage. The proposed adaptive coordinated control laws for the throttle angle of the engine and the voltage of the power-converter can guarantee not only the asymptotic tracking performance of the engine speed and the regulation of the battery charging voltage, but also the robust stability of the closed loop system under external load changes. Simulation results are given to verify the performance of the proposed adaptive controller.

Synchronization of networked multibody systems using fundamental equation of mechanics

From the analytical dynamics point of view, this paper develops an optimal control framework to synchronize networked multibody systems using the fundamental equation of mechanics. A novel robust control law derived from the framework is then used to achieve complete synchronization of networked identical or non-identical multibody systems formulated with Lagrangian dynamics. A distinctive feature of the developed control strategy is the introduction of network structures into the control requirement. The control law consists of two components, the first describing the architecture of the network and the second denoting an active feedback control strategy. A corresponding stability analysis is performed by the algebraic graph theory. A representative network composed of ten identical or non-identical gyroscopes is used as an illustrative example. Numerical simulation of the systems with three kinds of network structures, including global coupling, nearest-neighbour, and small-world networks, is given to demonstrate effectiveness of the proposed control methodology.

Two-mode intelligent coordinating control of position for the welding positioner

A new intelligent control method for welding positioner is proposed. Applying an improved fuzzy controller and a variable PID controller, a two-mode intelligent coordinating controller ( TMICC ) is designed on basis of fuzzy logic and rules. The simulation and experimental results show that this control system can obtain better dynamic and static characteristics.

Program structures and synchronization schemes in numerical coordinate controllers of three-wire welding

In the three-wire welding system, a welding process consists of the operations of four devices, namely three welding machines and one bogie. The operations need to be synchronized by a numerical coordinate controller （ NCC ）. In this paper, we will discuss a tnsk-job-procedure cubic program structure. Under this structure, the devices are synchronized and isolated at the same time. This cubic program structure can also be used as a reference for other multi-device or multi-unit manufacturing processes.