Exploring the effect of cooling rate on non-isothermal crystallization of copolymer polypropylene by fast scanning calorimetry

Polypropylene is commonly used as a binder for ceramic injection molding,and rapid cooling is often encountered during processing.However,the crystallization behavior of polypropylene shows a strong dependence on cooling rate due to its semi-crystalline characteristics.Therefore,the influence of cooling rate on the quality of final product cannot be ignored.In this study,the fast differential scanning calorimetry(FSC)test was performed to study the influence of cooling rate on the non-isothermal crystallization behavior and non-isothermal crystallization kinetics of a copolymer polypropylene(PP BC03B).The results show that the crystallization temperatures and crystallinity decrease as the cooling rate increases.In addition,two exothermic peaks occur when cooling rate ranges from 30 to 300 K·s^(-1),indicating the formation of another crystal phase.Avrami,Ozawa and Mo equations were used to explore the non-isothermal crystallization kinetics,and it can be concluded that the Mo method is suitable for this study.

Influence ofβ-nucleating Compound Agents on the Mechanical Properties and Crystallization Behavior of Polypropylene Random Copolymer

A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifier(TPE/WBG-2/CaCO_(3)).The effects of differentβ-nucleating agents and ternary compound modifier on the mechanical properties and crystallization behavior of PPR were analyzed.The results show that,compared with pure PPR materials,both WBG-2 and TMB-5 could significantly improve the impact strength of PPR.The crystallization temperature of PPR increased with the addition ofβ-nucleating agent.The modified PPR prepared with ternary compound modifier showed the most excellent comprehensive properties.

A fast ionic transport copolymeric network for stable quasi-solid lithium metal battery

Solid-state lithium(Li) metal batteries overwhelm the lithium-ion batteries by harvesting high energy from Li metal anode with ultrahigh capacities and gaining excellent safety from solid electrolytes.However,the uncontrollable solvents in solid electrolytes usually aggravate poor interfacial contact with lithium metal anode and deteriorate Li^(+) pathways.Here a copolymeric network-structured ion conductor by rationally integrating cellulose nanofibril as a two-in-one functional material is employed to anchor the solvent.Taking advantages of tightly anchoring of cellulose nanofibril to solvent,the asconstructed quasi-solid polymer-based electrolyte offers rapid Li^(+) transport channels and realizes effective Li-dendrite suppression,which enables high ionic conductivity of 1.93 × 10^(-3)S cm^(-1) at room temperature,long-term Li plating/stripping over 1900 h,and high capacity retention of 99%.This work provides a fresh strategy for creating solid electrolytes that meet both high ionic conductivity and interfacial stability requirements for practical solid-state lithium metal battery.

Research on the Marine Antifouling Ability and Mechanism of Acrylate Copolymers and Marine Coatings Based on a Synergistic Effect

Marine biofouling is an urgent global problem in the process of ocean exploitation and utilization.In our work,a series of zinc-based acrylate copolymers(ACZn-x)were designed and synthesized using benzoic acid,zinc oxide(ZnO)and a random quaternion copolymer consisting of ethyl acrylate(EA),butyl acrylate(BA),acrylic acid(AA)and methacrylic acid(MAA)by free radical polymerization and dehydration condensation.The ACZn-x with a zinc benzoate side chain is able to hydrolyze in natural seawater under static conditions,resulting in the formation of a smooth surface.We investigated and confirmed the antifouling(AF)behavior of ACZn-x in the laboratory and revealed that they have better antibacterial(86%for S.aureus and 72%for E.coli)and anti-algal(≥60.1%for N.closterium and≥67.5%for P.subcordiformis)activities.We also assessed the marine AF properties of ACZn-x and corresponding coatings in Qingdao,China;the ACZn-x exhibited ideal AF properties with little silt and biological mucosa adhered to the ACZn-x surface after 6 months,and corresponding coatings exhibited little biofouling after 16 months in the ocean.Importantly,possible AF mechanisms were further proposed at the cellular level.These results could be helpful for the development and application of effective AF coatings.

Ethylene Copolymerization with Linear and End-Cyclized Olefins via a Metallocene Catalyst:Polymerization Behavior and Thermal Properties of Copolymers

Olefin solution polymerization can be used to obtain high-performance polyolefin materials that cannot be obtained via other polymerization processes.Polyolefin elastomers(POE)are a typical example.Due to cost,only a few linear a-olefins(e.g.,1-butene,1-hexene,and 1-octene)are used as comonomers in solution polymerization in industry.However,a-olefin comonomers with other structures may have different effects on polymerization in comparison with common linear ones.Moreover,the properties of the corresponding materials may differ significantly.In this work,copolymers of ethylene with linear and endcyclized a-olefins are synthesized using a metallocene catalyst.The copolymerization of ethylene with linear a-olefins results in a higher turn-over frequency(TOF)and lower incorporation than copolymerization with end-cyclized a-olefins,which may indicate that end-cyclized a-olefins have a higher coordination probability and lower insertion rate.In this reaction,the comonomer is distributed randomly in the polymer chain and efficiently destroys crystallization.End-cyclized a-olefins exhibit a much stronger crystallization destructive capacity(CDC)in the copolymer than linear a-olefins,possibly because linear a-olefins act mainly in the radial direction of the main chain of the polymer,while end-cyclized a-olefins act mainly in the axial direction of the main chain.

Highly efficient organic solar cells with improved stability enabled by ternary copolymers with antioxidant side chains

The stability of organic solar cells(OSCs)remains a major concern for their ultimate industrialization due to the photo,oxygen,and water susceptibility of organic photoactive materials.Usually,antioxidant additives are blended as radical scavengers into the active layer.However,it will induce the intrinsic morphology instability and adversely affect the efficiency and long-term stability.Herein,the antioxidant dibutylhydroxytoluene(BHT)group has been covalently linked onto the side chain of benzothiadiazole(BT)unit,and a series of ternary copolymers D18-Cl-BTBHTx(x=0,0.05,0.1,0.2)with varied ratio of BHT-containing side chains have been synthesized.It was found that the introduction of BHT side chains would have a negligible effect on the photophysical properties and electronic levels,and the D18-Cl-BTBHT0.05:Y6-based OSC achieved the highest power conversion efficiency(PCE)of 17.6%,which is higher than those based active layer blended with BHT additives.More importantly,the unencapsulated device based on D18-Cl-BTBHTx(x=0.05,0.1,0.2)retained approximately 50%of the initial PCE over 30 hours operation under ambient conditions,significantly outperforming the control device based on D18-Cl(90%degradation in PCE after 30 h).This work provides a new structural design strategy of copolymers for OSCs with simultaneously improved efficiency and stability.

QUANTITATIVE EVALUATION OF ARRANGEMENT OF MONOMERS IN LINEAR BINARY COPOLYMERS USING A MONTE CARLO SIMULATION METHOD

A Monte Carlo method was used to take thorough account of the influences of different reactivity ratios and initial feed compositions on copolymer microstructure.The model proves the lack of azeotropic behavior in systems in which r_A>1 and r_B<1 or vice versa;it is also able to calculate the drift in the copolymer properties:copolymer composition,and randomness parameter.Moreover,for each reactivity ratio pair given,there is a unique reaction conversion,at which macromolecules produced inherit their ...

MOLECULAR DESIGN SYNTHESIS AND PROPERTIES OF SIX KINDS OF MULTIPHASE (STYRENE-ETHYLENE OXIDE)COPOLYMERS

Multiphase copolymers of styrene (S) and ethylene oxide (EO) are amphiphilic, because of the hydrophobic and amorphous polystyrene (PS) segments and the hydrophilic and crystalline polyoxyethylene (PEO). They have many uses including polymeric surfactants, electrostatic charge reducers, compatibilizer in polymer

Synthesis and application of lignin-based copolymer LSAA on controlling non-point source pollution resulted from surface runoff

In this article,alkali lignin separated from paper pulp waste was grafted into a novel copolymer LSAA (a copolymer of lignin,starch, acrylamide,and acrylic acid).Its practical application effect and environmental safety were studied.The results of field simulation experiment indicated that the application of LSAA significantly affected the output of the runoff and pollutants.The runoff quantity was decreased by 16.67%-47.00%and the loads of total suspended solids (TSS),chemical oxygen demand (COD),total nit...

NONBRIDGED HALF-TITANOCENES CONTAINING ANIONIC ANCILLARY DONOR LIGANDS:PROMISING NEW CATALYSTS FOR PRECISE SYNTHESIS OF CYCLIC OLEFIN COPOLYMERS(COCs)

Precise,efficient copolymerizations of ethylene with cyclic olefins[norbornene(NBE),cyclopentene(CPE)]using nonbridged half-titanocenes of type,Cp TiCl_2(L)(Cp =cyclopentadienyl group,L=aryloxo,ketimide)-MAO catalyst systems have been summarized.CpTiCl_2(N=C Bu_2)exhibited both remarkable catalytic activity and efficient NBE incorporation for ethylene/NBE copolymerization:the NBE incorporation by Cp TiCl_2(X)(X=N=C Bu_2,O-2,6- Pr_2C_6H_3; Cp =Cp,C_5Me_5,indenyl)was related to the calculated coordination ene...

AMPHIPHILIC STAR-BLOCK COPOLYMERS BY IODIDE-MEDIATED RADICAL POLYMERIZATION

Amphiphilic star-block copolymers composed of polystyrene and poly（acrylic acid） were synthesized by iodide- mediated radical polymerization. Firstly, free radical polymerization of styrene was carried out with AIBN as initiator and 1,1,1-trimethyolpropane tri（2-iodoisobutyrate） as chain transfer agent, giving iodine atom ended star-shaped polystyrene with three arm chains, R（polystyrene）3. Secondly, tert-butyl acrylate was polymerization using polystyrene obtained as macro-chain transfer agent, and star-block copolymer, R（polystyrene-b-poly（tert-butyl acrylate））3 with controlled molecular weight was obtained. Finally, amphiphilic star-block copolymer, R（polystyrene-b-poly（acrylic acid））3 was obtained by hydrolysis of R（polystyrene-b-poly（tert-butyl acrylate））3 under acidic condition.

CHARACTERISTICS OF STRUCTURE OF IMPACT COPOLYMERS OF POLYPROPYLENE WITH LOW ETHYLENE CONTENTS

In the present work, the structure and impact properties of copolymers of polypropylenewith low ethylene contents have been investigated. Based on the results of ^(13)C--NMR, FTIR,WAXD, DSC, PLM and SEM, the relationship between impact properties and morphology of thecopolymers has been discussed. The high impact properties of copolymer ICP2 may attribute tothe relatively higher ethylene content and homogeneous ethylene unit distribution. The size andits distribution of spherulite in the copolymers and cycloid cavities dispersed in polypropylenecontinue phase may also be two important factors which affect the impact properties of these materials.

Copolymer 1保护高眼压大鼠视神经的免疫学机制

目的探讨Copolymer 1(Cop 1)对实验性高眼压性青光眼视神经保护作用的相关免疫学机制。方法对27只大鼠采用烧灼巩膜上静脉制作双眼高眼压模型,在眼压升高的第3周,取12只模型大鼠于后脚皮内注射100μg Cop 1和等体积的完全弗氏佐剂(CFA)混合乳化液(实验组);另取12只模型大鼠作为对照组,后脚皮内注射等体积PBS和CFA的混合乳化液;其余3只模型大鼠作为空白对照组,不做任何处理。1周后取出大鼠脾淋巴细胞,采用流式细胞仪检测T细胞亚群的变化;ELISA法检测T细胞分泌细胞因子的变化;[3H]thymidine标记检测淋巴细胞的增殖。结果实验组大鼠的CD4+CD25+Treg/CD4+比值显著高于对照组和空白对照组(P<0.05)。实验组IL-10分泌量和分泌浓度均显著高于对照组和空白对照组,差异有统计学意义(P<0.05),但三组间INF-γ分泌量和分泌浓度比较差异均无统计学差异(P>0.05)。三组间体外刺激淋巴细胞指数比较差异无统计学意义(P>0.05)。结论 Cop 1能诱导CD4+CD25-向CD4+CD25+Treg转化,促进Th1转化为Th2,并增加IL-10的分泌。

Copolymer1保护视神经的作用及作用机制

Copolymer1(Cop1)是美国FDA批准的一种用于治疗多发性硬化的多聚肽类药物。许多实验用Cop1免疫动物,发现Cop1对钳伤和高眼压造成的视神经损伤有保护作用。我们对Cop1作用的免疫学机制的研究进展进行综述。

ELECTROCHEMICAL COPOLYMERIZATION OF ANILINE AND AZURE B

The electrochemical copolymerization of aniline and N,N,N'-trimethylthionin (azure B) in aqueous solutions has been carried out using the potential sweep method. The optimum conditions for the coelectrodeposition are that the pH value and the temperature of the electrolytic solution are controlled at 5.57 and 30 degreesC, respectively, and the scan potential range is set between -0.25 and 1.10 V (versus SCE). The copolymerization rate of aniline and azure B is about 3 times larger than that of aniline in the absence of azure B. The copolymerization of aniline and azure B was verified from the results of visible spectra during electrolysis, FTIR spectra and the atomic force microscopy (AFM) images of the polymers. The in situ visible spectrum for the electrolysis of the solution containing aniline and azure B is different from that of the respective aniline and azure B. The FTIR spectrum of the copolymer is not a superposition of that of polyaniline and poly(azure B). The AFM image of the copolymer is different from those of polyaniline and poly(azure B) and is not a mixture of individual polymers. The conductivity of the copolymer synthesized at pH 5.57 is four orders of magnitude higher than that of polyaniline synthesized under the same conditions, but in the absence of azure B. The electrochemical properties of the copolymer are mainly attributed to polyaniline, but the copolymer has a better electrochemical reversibility and a much faster charge transfer than those of polyaniline.

EFFECT OF TEMPERATURE ON COPOLYMERIZATION PARAMETERS OF HYDROXYETHYL ACRYLATE AND METHYL METHACRYLATE

The copolymerization of 2-hydroxyethyl acrylate (HEA, M//1) and methyl methacrylate (MMA, M//2) in cyclohexanone was studied. The multiple experiments of solution copolymerization with low conversion were carried out at two sensitive composition feed points at 60, 80, 100, 120 and 140 degree C, respectively. The composition of the copolymers was analyzed by **1H-NMR. The reactivity ratios which were estimated by the Error-in-Variable Method (EVM) of Mayo-Lewis equation were found to be r//1 equals 0.328, r//2 equals 1.781 for 60 degree C; 0.375, 1.709 for 80 degree C; 0.406, 1.654 for 100 degree C; 0.439, 1.540 for 120 degree C and 0.455, 1.400 for 140 degree C, and the 95% joint confidence intervals of the reactivity ratios were also determined. According to r//1 and r//2, Arrhenius relations and the activity energy difference between the homo- and cross-propagation were calculated. (Author abstract) 12 Refs.

Enantioselective Alternating Copolymerization of Propylene with Carbon Monoxide Using Cationic Palladium-Chiral Diphosphine Catalyst

Enantioselective alternating copolymerization of carbon monoxide with propylene was carried out using palladium catalyst modified by 1,4-3,6-dianhydro-2,5-dideoxy-2,5-bis (diphenylphosphino)-L-iditol (DDPPI). The chiral diphosphine was proved to be effective at enantioselective copolymerization. Optical rotation, elemental analysis, H-1, C-13-NMR and IR spectra showed that the copolymer was optically active, isotactic, alternating poly(1,4-ketone) structure.

Synthesis and Characterization of a Novel Acrylonitrile Copolymer Containing Glucose Pendants

In this work, a novel sugar-containing copolymer was synthesized by the copolymerization of a-allyl glucoside (AG) with acrylonitrile (AN). The copolymers were characterized by NMR spectroscopy. It was found that acrylonitrile-based copolymers containing as high as 22wt.% of a-allyl glucoside can be synthesized by the free radical solution copolymerization of the two monomers in DMSO with AIBN as initiator.

EFFECTS OF ω-ACRYLOYL POLY (ETHYLENE OXIDE) MACROMONOMER ON EMULSIFIER-FREE EMULSI0N COPOLYMERIZATION OF METHYL METHACRYLATE AND n-BUTYL ACRYLATE

Well-defined nonionic hydrophilic ω-acryloyl poly(ethylene oxide) macro-monomer (PEO-A) has been prepared by living anionic polymerization of ethylene oxidewith diphenyl methyl potassium as the initiator and acryloyl chloride as the reaction termi-nating agent. The polymer was characterized by FTIR and SEC. The emulsifier-free emul-sion polymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA) containingvarious concentrations of PEO-A was studied. In all cases stable emulsion coplymerizationsof MMA and BA were obtained. The stabilizing effect was found to be dependent on themolecular weight and the feed amount of the macromonomer.

MORPHOLOGICAL TRANSITION BETWEEN VESICLES AND TUBULES FOR A GLYCOPOLYMER-CONTAINING AMPHIPHILIC DIBLOCK COPOLYMER IN AQUEOUS SOLUTIONS

The morphological transition of molecular assemblies in aqueous solutions for a new amphiphilic diblock copolymer induced by changing the initial solvent conditions was studied by transmission electron microscopy (TEM). The copolymer was polystyrene(77)-b-poly[2-(beta -D-glucopyranosyloxy)ethyl acrylate (6)] (PSt(77)-b-PGEA(6)) and the solvent was a mixture of DMF and THF. PSt(77)-b-PGEA(6) yields vesicles and tubules when it is initially dissolved in THF and DMF respectively. The morphological transition between vesicles and tubules can be achieved by simply varying the amounts of THF and DMF, or changing the temperature at which the aggregates were prepared.