Influences of Copolymer Composition upon the Behaviors of Poly(vinyl acetate-co-acrylamide)Sizing Agents

A series of poly(vinyl acetate-co-acrylamide)copolymers with different mole ratios of vinyl acetate to acrylamide units were synthesized by emulsion polymerization for investigating the influences of copolymer composition upon the performance such as apparent viscosity,film behaviors,and adhesion capacity to fibers for warp sizing operation.The mole ratios of vinyl acetate to acrylamide were varied from 0 to 4.By using an impregnated roving method,the adhesion was evaluated in terms of the maximal strength and work to break of a slightly sized roving.The film behaviors included breaking strength,breaking elongation,solution time and hygroscopic capacity.It was found that the viscosity,adhesion capability,glass transition temperature and film behaviors of the copolymeric sizing agent strongly depended on the mole ratio.Excessively increasing the amounts of vinyl acetate or acrylamide units incorporated into the copolymeric chains damages much of the performance.A favorable mole ratio of vinyl acetate or acrylamide was found to be 45∶55.Based on this mole ratio,the adhesion capability and film behaviors of the sizing agent reach their maximal values simultaneously.This demonstrates that the sizing agent should be synthesized under this copolymer composition from the viewpoint of adhesion and film behaviors.

Phase Partition of Acrylonitrile(AN)in Vinylidene Chloride(VDC)/Water System and Its Effect on VDC-AN Copolymer Composition

Phase partition of acrylonitrile in the vinylidene chloride/water system at different temperature and under pressure was studied. A calculation method for average VDC-AN copolymer composition with AN phase partition considered was proposed. The calculated results are in good agreement with the experimental data nearly the entire conversion range. VDC-AN copolymer with narrower composition distribution can be prepared in the suspension process and interpreted with dynamic equilibrium of AN between the oil and water phases continuously.

QUANTITATIVE EVALUATION OF ARRANGEMENT OF MONOMERS IN LINEAR BINARY COPOLYMERS USING A MONTE CARLO SIMULATION METHOD

A Monte Carlo method was used to take thorough account of the influences of different reactivity ratios and initial feed compositions on copolymer microstructure.The model proves the lack of azeotropic behavior in systems in which r_A>1 and r_B<1 or vice versa;it is also able to calculate the drift in the copolymer properties:copolymer composition,and randomness parameter.Moreover,for each reactivity ratio pair given,there is a unique reaction conversion,at which macromolecules produced inherit their ...

THE EFFECT OF MONOMERS FEEDING METHODS ON EMULSION COPOLYMERIZATION OF VINYLIDENE CHLORIDE AND ACRYLATES

The emulsion copolymerization of vinylidene chloride (VDC) with methyl-methacrylate(MMA) and acrylonitrile (AN) was carried out by batch, seeded batch and semicontinuous pro-cesses,respectively. Significant differences were found in the physical and mechanical propertiesof the latexes and films, depending on the methods of monomer feeding. The results both intheory and experiments demonstrated that the copolymer composition and the length of the VDC sequences in the copolymer could be controlled by the modes of monomer feeding process.

EFFECT OF TEMPERATURE ON COPOLYMERIZATION PARAMETERS OF HYDROXYETHYL ACRYLATE AND METHYL METHACRYLATE

The copolymerization of 2-hydroxyethyl acrylate (HEA, M//1) and methyl methacrylate (MMA, M//2) in cyclohexanone was studied. The multiple experiments of solution copolymerization with low conversion were carried out at two sensitive composition feed points at 60, 80, 100, 120 and 140 degree C, respectively. The composition of the copolymers was analyzed by **1H-NMR. The reactivity ratios which were estimated by the Error-in-Variable Method (EVM) of Mayo-Lewis equation were found to be r//1 equals 0.328, r//2 equals 1.781 for 60 degree C; 0.375, 1.709 for 80 degree C; 0.406, 1.654 for 100 degree C; 0.439, 1.540 for 120 degree C and 0.455, 1.400 for 140 degree C, and the 95% joint confidence intervals of the reactivity ratios were also determined. According to r//1 and r//2, Arrhenius relations and the activity energy difference between the homo- and cross-propagation were calculated. (Author abstract) 12 Refs.

Synthesis and Performances of Poly(2-ethylhexyl acrylate-co-acrylic acid) Used for Warp Sizing

A series of poly （ 2-ethylhexyl acrylate-co-acrylic acid ） s （ P （2-EHA-co-AA） ）s with different mole contents of 2-ethylhexyl acrylate （ 2-EHA ） were synthesized through free radical copolymerization in ethanol for investigating the influences of copolymer composition upon the performance such as apparent viscosity, film behaviors, and adhesion to fibers for warp sizing. The content of 2-EHA was varied from 80 % to 40 %. The adhesion was estimated by measuring tensile strength and work-to-break of impregnated roving. The film behaviors were evaluated in terms of breaking strength, breaking elongation, work-to-break, and flex- fatigue resistance. It was observed that the viscosity, adhesion, and film behaviors of the copolymers strongly depended on the content of 2-EHA. Excessively increasing or decreasing the content of 2-EHA units incorporated into the copolymeric chains reduces the serviceability of P（2-EHA-co-AA） in warp sizing. The adhesion and film behaviors of the copolymcr reach their maximal values at mole content of 50 % simultaneously. Therefore, the copolymer used as sizing agent should be synthesized under equal mole of 2-EHA and AA in monomer formulation.