Quality Assurance and Quality Control (QA/QC) is a critical component of all pXRF geochemistry processes. A properly constructed pXRF QA/QC programme identifies possible instrumental errors and provides a means of sec...Quality Assurance and Quality Control (QA/QC) is a critical component of all pXRF geochemistry processes. A properly constructed pXRF QA/QC programme identifies possible instrumental errors and provides a means of securing fit for purpose data from the pXRF programme. pXRF QA/QC programmes involve daily contamination, precision, and accuracy checks to ensure the generation of fit for purpose data. In the exploration field or mine-site, pXRF is capable of producing extremely valuable data that is fit for purpose if calibrated properly. However, it should not be used as a replacement for acquiring data from an accredited laboratory using established analytical techniques that produce high quality data. Contamination is the checking of the cleanliness of the analyser window or the presence of dust in the measuring environment. At Polymetals, using Olympus Vanta C-Series pXRF analyser with silver anode, contamination is assessed by measuring an instrumental blank (SiO<sub>2</sub>), to identify any foreign matter on the analyser window. Assuming that the window film is new, and the fused silica disc is dust free, only Si should be detected. If any other significant element is detected, the film is replaced, and the test is re-run. Accuracy is a measure of how close the measured value is to the true value and is assessed by measuring the abundance of selected elements contained within a Certified Reference Material (CRM) or the NIST check standard sample supplied with the pXRF analyser. Elements of interest must report within ±20% of the standard value. Precision is a measure of how close repeat measurements are to one another and is assessed by taking multiple readings on a particular sample to determine the stability of the analyser. The Relative Standard Deviation (RSD) of the replicate measurements is then calculated. The RSD values should be less than 20% for most analytes, except chromium, for which the value should be less than 30%. Once contamination, accuracy and precision are within accepted limits, the batch/daily measurements are considered to have passed the QA/QC protocol. The data is thus fit for purpose and transferred to the data file. Any batch/daily measurement reported to have failed due to instrumental errors is re-analysed. QA/QC protocols should be applied to each project. The QQ/QC protocols instituted after the pXRF samples meeting the quality sample conditions thus pulverised dry samples in pXRF sample cup covered with thin pXRF films, are used to generate fit for purpose data from soils samples at Mansala which is used to generate pathfinder element(s) to delineate anomalous pathfinder trends for further exploration works.展开更多
The Tongling ore district is one of the most economically important ore areas in the Middle–Lower Yangtze River Metallogenic Belt, eastern China. It contains hundreds of polymetallic copper–gold deposits and occurre...The Tongling ore district is one of the most economically important ore areas in the Middle–Lower Yangtze River Metallogenic Belt, eastern China. It contains hundreds of polymetallic copper–gold deposits and occurrences. Those deposits are mainly clustered(from west to east) within the Tongguanshan, Shizishan, Xinqiao, Fenghuangshan, and Shatanjiao orefields. Until recently, the majority of these deposits were thought to be skarn-or porphyry–skarn-type deposits; however there have been recent discoveries of numerous vein-type Au, Ag, and Pb-Zn deposits that do not fall into either of these categories. This indicates that there is some uncertainty over this classification. Here, we present the results of several systematic geological studies of representative deposits in the Tongling ore district. From investigation of the ore-controlling structures, lithology of the host rock, mineral assemblages, and the characteristics of the mineralization and alteration within these deposits, three genetic types of deposits(skarn-, porphyry-, and vein-type deposits) have been identified. The spatial and temporal relationships between the orebodies and Yanshanian intrusions combined with the sources of the ore-forming fluids and metals, as well as the geodynamic setting of this ore district, indicate that all three deposit types are genetically related each other and constitute a magmatic–hydrothermal system. This study outlines a model that relates the polymetallic copper–gold porphyry-, skarn-, and vein-type deposits within the Tongling ore district. This model provides a theoretical basis to guide exploration for deep-seated and concealed porphyry-type Cu(–Mo, –Au) deposits as well as shallow vein-type Au, Ag, and Pb–Zn deposits in this area and elsewhere.展开更多
The Yulong supper\|large copper deposit is situated within the well\|known S\|N striking Yulong copper\|molybdenum ore belt. The ore\|bearing biotite\|monogranitic porphyry was emplaced within clastic rocks (mainly sh...The Yulong supper\|large copper deposit is situated within the well\|known S\|N striking Yulong copper\|molybdenum ore belt. The ore\|bearing biotite\|monogranitic porphyry was emplaced within clastic rocks (mainly shales and siltstones) of the Jiapila Formation (T 3 j ) and carbonate rocks of the Bolila Formation (T 3 b ) of the Upper Triassic. Five mineralization patterns have been recognized in the deposit, i.e., ①veinlet\|disseminated Cu\|Mo ore in the porphyry; ②skarn\|type Cu ore at the contact zone with carbonates (T 3 b ); ③stratiform\|like oxidized Cu ore between T 3 b carbonate rocks and T 3 j hornstones; ④brecciated Cu ore at the local periphery of porphyry; and ⑤vein Pb\|Zn\|Ag ore in the outer contact zone. They constitute a unique integrated polymetal mineralization series of epigenetic intermediate\|acid magmatic hydrothermal system.Studies have shown that the Yulong deposit was the coupling product of sedimentation, magmatism, and tectonism. The Cu\|bearing sandstones in the Japila Formation have provided partial ore\|bearing materials for the porphyry mineralization during the Himalayan period. The mineralized porphyry mass was passively emplaced and controlled by a nose\|like anticlinal trap opening to the north. The interlayered fractured zone formed during folding between the Jiapila and Bolila Formations acted as favorable host space for stratiform\|like skarn and oxidized ores. A large number of cleavages and fissures developed during folding provided both conduits for the circulation of ore\|forming fluids and host spaces for Pb\|Zn\|Ag ore veins. The veinlet\|disseminated Cu\|Mo ore in the porphyry mass owns the characteristics of typical porphyry copper deposits in the world. The veinlet\|disseminated ore body and the stratiform\|like skarn\|type and/or oxidized ore body, the two main ore bodies in Yulong, are connected with each other and shown as “mushroom\|like" shape, in which the former occurs as “mushroom stem" and the latter as “mushroom cover".展开更多
The Lanping Mesozoic—Cenozoic sedimentary basin, situated in the Middle section of the “Sanjiang" (Nujiang—Lancangjiang—Jinshajiang) area in the east margin of the Tibet plateau, is well known for its large p...The Lanping Mesozoic—Cenozoic sedimentary basin, situated in the Middle section of the “Sanjiang" (Nujiang—Lancangjiang—Jinshajiang) area in the east margin of the Tibet plateau, is well known for its large production of base\|metal sulphide deposits. The worldwide famous super\|large Jinding Pb\|Zn deposit is located in the middle of the basin. The evolution history of the Lanping basin since Mesozoic can be divided into six stages, i.e., ①active continental marginal basin (T 1—T 2); ②back\|arc rift basin (T 3—J 1); ③intracontinental depressive basin (J 2—J 3); ④foreland basin (K); ⑤strike\|slipping and mutual thrusting (E 1—E 3); and ⑥strike\|slipping and pull\|apart basin (N 1\|present). Three main types of Ag\|Cu polymetal deposits are recognized in the basin. Deposits of sedimentary exhalation\|hydrothermal reworking origin (type Ⅰ) are hosted chiefly in limestones, dolomitic limestones, and siliceous rocks of the Upper Triassic Sanhedong Formation (T 3 s ) in Sanshan area. Deposits formed through normal chemical sedimentation in closed to semi\|closed environments (type Ⅱ; e.g., Jinman and Baiyangchang) during the depressive and foreland basin stages occur in various horizons of Jurassic and Cretaceous ages. Hydrothermal reworking on deposits of this type during the Himalayan period are locally pronounced, especially in the west margin of the basin near the Lancangjiang thrust fault. The third deposit type in the basin (type Ⅲ; e.g., Baiyangping and Fulongchang) is the Ag\|bearing tetrahedrite vein deposits occurring almost in all Mesozoic—Cenozoic strata, especially in the Cretaceous. Ore minerals formed during synsedimentary periods of types Ⅰ and Ⅱ are relatively simple and dominated by chalcopyrite and bornite, though sphalerite, galena, pyrite, tetrahedrite and pyrite are also present. In the deposits of type Ⅲ as well as in the ores formed during the hydrothermal reworking period in deposits of type Ⅰ and Ⅱ, ore minerals are extremely complicated and characterized by predominant Ag\|bearing tetrahedrite and other complex sulfosalts of Cu\|Ni\|Co\|Fe\|As\|S and Cu\|Bi\|S series. The associated gangue minerals are mainly quartz, siderite, Fe\|dolomite, barite, and celestite.展开更多
The Dachang superlarge Sn-polymetal deposit in Guangxi, China, is one of the largest tin deposit all over the world. However, this deposit has long been in debate as to its origin. One of the opinions is that the Dach...The Dachang superlarge Sn-polymetal deposit in Guangxi, China, is one of the largest tin deposit all over the world. However, this deposit has long been in debate as to its origin. One of the opinions is that the Dachang deposit was formed by replacement of hydrothermal solution originating from Yanshanian granites, and the other is that this deposit was formed by submarine exhalation in the Devonian. This paper presents some new isotopic geochronology data obtained with the 40Ar-39Ar method for quartz and sanidine from massive ore in the No. 91 and No. 100 orebodies. Analytic results show that the No. 91 orebody was formed at 94.52±0.33 Ma (the plateau age obtained with the 40Ar-39Ar method for quartz) or 91.4±2.9 Ma (the plateau age obtained with the 40Ar-39Ar method for feldspar), while the No. 100 orebody was formed at 94.56±0.45 Ma (the plateau age obtained with the 40Ar-39Ar method for quartz), suggesting that both the No. 91 and the No. 100 orebodies were formed at the Late Yanshanian instead of the Devonian. The No. 100 orebody might be formed by filling of ore materials into caves in Devonian reef limestone. Because the ore-bearing solution released its pressure and lowered its temperature suddenly in a cave environment, ore minerals were formed concentratedly while water and other materials such as CO2 evaporated quickly, resulting less alteration of host rocks.展开更多
By means of multivariance analysis and finite element on the basis of the analysis of generation andevolution of structural systems and structural system of syn-metallogenesis in the orefield,the authorsmade a researc...By means of multivariance analysis and finite element on the basis of the analysis of generation andevolution of structural systems and structural system of syn-metallogenesis in the orefield,the authorsmade a research into the interrelation between tecto-geochemistry and structural stress field,revealedthe mechanism of metallogenesis by magma and ore-forming fluids driven under dynamic forces,andproposed a tecto-geochemistry model for the formation of the ore deposits,so as to suggest a basis oftheory for the prognoses of location and magnitude of hidden deposits.展开更多
The Bangong Lake-Nujiang River metallogenic belt is located between the Qiangtang Block and Lhasa Block, and the Duolong ore concentration area is located in the western section of the Bangong Lake-Nujiang River metal...The Bangong Lake-Nujiang River metallogenic belt is located between the Qiangtang Block and Lhasa Block, and the Duolong ore concentration area is located in the western section of the Bangong Lake-Nujiang River metallogenic belt. Till now, several large and super large copper-gold deposits, such as Duobuza, Bolong, Dibaonamugang, Naruo and Rongna deposits have been discovered in this area, mainly porphyry copper-gold ones.展开更多
文摘Quality Assurance and Quality Control (QA/QC) is a critical component of all pXRF geochemistry processes. A properly constructed pXRF QA/QC programme identifies possible instrumental errors and provides a means of securing fit for purpose data from the pXRF programme. pXRF QA/QC programmes involve daily contamination, precision, and accuracy checks to ensure the generation of fit for purpose data. In the exploration field or mine-site, pXRF is capable of producing extremely valuable data that is fit for purpose if calibrated properly. However, it should not be used as a replacement for acquiring data from an accredited laboratory using established analytical techniques that produce high quality data. Contamination is the checking of the cleanliness of the analyser window or the presence of dust in the measuring environment. At Polymetals, using Olympus Vanta C-Series pXRF analyser with silver anode, contamination is assessed by measuring an instrumental blank (SiO<sub>2</sub>), to identify any foreign matter on the analyser window. Assuming that the window film is new, and the fused silica disc is dust free, only Si should be detected. If any other significant element is detected, the film is replaced, and the test is re-run. Accuracy is a measure of how close the measured value is to the true value and is assessed by measuring the abundance of selected elements contained within a Certified Reference Material (CRM) or the NIST check standard sample supplied with the pXRF analyser. Elements of interest must report within ±20% of the standard value. Precision is a measure of how close repeat measurements are to one another and is assessed by taking multiple readings on a particular sample to determine the stability of the analyser. The Relative Standard Deviation (RSD) of the replicate measurements is then calculated. The RSD values should be less than 20% for most analytes, except chromium, for which the value should be less than 30%. Once contamination, accuracy and precision are within accepted limits, the batch/daily measurements are considered to have passed the QA/QC protocol. The data is thus fit for purpose and transferred to the data file. Any batch/daily measurement reported to have failed due to instrumental errors is re-analysed. QA/QC protocols should be applied to each project. The QQ/QC protocols instituted after the pXRF samples meeting the quality sample conditions thus pulverised dry samples in pXRF sample cup covered with thin pXRF films, are used to generate fit for purpose data from soils samples at Mansala which is used to generate pathfinder element(s) to delineate anomalous pathfinder trends for further exploration works.
基金funded by the National Natural Science Foundation of China(NSFC)(grant numbers 41472066,40972063 and 41672038)the Program of the Deep Exploration in China(SinoProb-03-05)+1 种基金the National KeyR&S Program of China(2016 YFC0600209)the Land and Resources Science and Techonolgy Foundation of Anhui Province(2016-K-03 and No.2014-K-03)
文摘The Tongling ore district is one of the most economically important ore areas in the Middle–Lower Yangtze River Metallogenic Belt, eastern China. It contains hundreds of polymetallic copper–gold deposits and occurrences. Those deposits are mainly clustered(from west to east) within the Tongguanshan, Shizishan, Xinqiao, Fenghuangshan, and Shatanjiao orefields. Until recently, the majority of these deposits were thought to be skarn-or porphyry–skarn-type deposits; however there have been recent discoveries of numerous vein-type Au, Ag, and Pb-Zn deposits that do not fall into either of these categories. This indicates that there is some uncertainty over this classification. Here, we present the results of several systematic geological studies of representative deposits in the Tongling ore district. From investigation of the ore-controlling structures, lithology of the host rock, mineral assemblages, and the characteristics of the mineralization and alteration within these deposits, three genetic types of deposits(skarn-, porphyry-, and vein-type deposits) have been identified. The spatial and temporal relationships between the orebodies and Yanshanian intrusions combined with the sources of the ore-forming fluids and metals, as well as the geodynamic setting of this ore district, indicate that all three deposit types are genetically related each other and constitute a magmatic–hydrothermal system. This study outlines a model that relates the polymetallic copper–gold porphyry-, skarn-, and vein-type deposits within the Tongling ore district. This model provides a theoretical basis to guide exploration for deep-seated and concealed porphyry-type Cu(–Mo, –Au) deposits as well as shallow vein-type Au, Ag, and Pb–Zn deposits in this area and elsewhere.
文摘The Yulong supper\|large copper deposit is situated within the well\|known S\|N striking Yulong copper\|molybdenum ore belt. The ore\|bearing biotite\|monogranitic porphyry was emplaced within clastic rocks (mainly shales and siltstones) of the Jiapila Formation (T 3 j ) and carbonate rocks of the Bolila Formation (T 3 b ) of the Upper Triassic. Five mineralization patterns have been recognized in the deposit, i.e., ①veinlet\|disseminated Cu\|Mo ore in the porphyry; ②skarn\|type Cu ore at the contact zone with carbonates (T 3 b ); ③stratiform\|like oxidized Cu ore between T 3 b carbonate rocks and T 3 j hornstones; ④brecciated Cu ore at the local periphery of porphyry; and ⑤vein Pb\|Zn\|Ag ore in the outer contact zone. They constitute a unique integrated polymetal mineralization series of epigenetic intermediate\|acid magmatic hydrothermal system.Studies have shown that the Yulong deposit was the coupling product of sedimentation, magmatism, and tectonism. The Cu\|bearing sandstones in the Japila Formation have provided partial ore\|bearing materials for the porphyry mineralization during the Himalayan period. The mineralized porphyry mass was passively emplaced and controlled by a nose\|like anticlinal trap opening to the north. The interlayered fractured zone formed during folding between the Jiapila and Bolila Formations acted as favorable host space for stratiform\|like skarn and oxidized ores. A large number of cleavages and fissures developed during folding provided both conduits for the circulation of ore\|forming fluids and host spaces for Pb\|Zn\|Ag ore veins. The veinlet\|disseminated Cu\|Mo ore in the porphyry mass owns the characteristics of typical porphyry copper deposits in the world. The veinlet\|disseminated ore body and the stratiform\|like skarn\|type and/or oxidized ore body, the two main ore bodies in Yulong, are connected with each other and shown as “mushroom\|like" shape, in which the former occurs as “mushroom stem" and the latter as “mushroom cover".
文摘The Lanping Mesozoic—Cenozoic sedimentary basin, situated in the Middle section of the “Sanjiang" (Nujiang—Lancangjiang—Jinshajiang) area in the east margin of the Tibet plateau, is well known for its large production of base\|metal sulphide deposits. The worldwide famous super\|large Jinding Pb\|Zn deposit is located in the middle of the basin. The evolution history of the Lanping basin since Mesozoic can be divided into six stages, i.e., ①active continental marginal basin (T 1—T 2); ②back\|arc rift basin (T 3—J 1); ③intracontinental depressive basin (J 2—J 3); ④foreland basin (K); ⑤strike\|slipping and mutual thrusting (E 1—E 3); and ⑥strike\|slipping and pull\|apart basin (N 1\|present). Three main types of Ag\|Cu polymetal deposits are recognized in the basin. Deposits of sedimentary exhalation\|hydrothermal reworking origin (type Ⅰ) are hosted chiefly in limestones, dolomitic limestones, and siliceous rocks of the Upper Triassic Sanhedong Formation (T 3 s ) in Sanshan area. Deposits formed through normal chemical sedimentation in closed to semi\|closed environments (type Ⅱ; e.g., Jinman and Baiyangchang) during the depressive and foreland basin stages occur in various horizons of Jurassic and Cretaceous ages. Hydrothermal reworking on deposits of this type during the Himalayan period are locally pronounced, especially in the west margin of the basin near the Lancangjiang thrust fault. The third deposit type in the basin (type Ⅲ; e.g., Baiyangping and Fulongchang) is the Ag\|bearing tetrahedrite vein deposits occurring almost in all Mesozoic—Cenozoic strata, especially in the Cretaceous. Ore minerals formed during synsedimentary periods of types Ⅰ and Ⅱ are relatively simple and dominated by chalcopyrite and bornite, though sphalerite, galena, pyrite, tetrahedrite and pyrite are also present. In the deposits of type Ⅲ as well as in the ores formed during the hydrothermal reworking period in deposits of type Ⅰ and Ⅱ, ore minerals are extremely complicated and characterized by predominant Ag\|bearing tetrahedrite and other complex sulfosalts of Cu\|Ni\|Co\|Fe\|As\|S and Cu\|Bi\|S series. The associated gangue minerals are mainly quartz, siderite, Fe\|dolomite, barite, and celestite.
基金the State Key BasicResearch Program ofChina(TG1999043203 ,TG1999043201) the Geological Survey Program(K1.4-3-4)under the Ministry of Land and Resources.
文摘The Dachang superlarge Sn-polymetal deposit in Guangxi, China, is one of the largest tin deposit all over the world. However, this deposit has long been in debate as to its origin. One of the opinions is that the Dachang deposit was formed by replacement of hydrothermal solution originating from Yanshanian granites, and the other is that this deposit was formed by submarine exhalation in the Devonian. This paper presents some new isotopic geochronology data obtained with the 40Ar-39Ar method for quartz and sanidine from massive ore in the No. 91 and No. 100 orebodies. Analytic results show that the No. 91 orebody was formed at 94.52±0.33 Ma (the plateau age obtained with the 40Ar-39Ar method for quartz) or 91.4±2.9 Ma (the plateau age obtained with the 40Ar-39Ar method for feldspar), while the No. 100 orebody was formed at 94.56±0.45 Ma (the plateau age obtained with the 40Ar-39Ar method for quartz), suggesting that both the No. 91 and the No. 100 orebodies were formed at the Late Yanshanian instead of the Devonian. The No. 100 orebody might be formed by filling of ore materials into caves in Devonian reef limestone. Because the ore-bearing solution released its pressure and lowered its temperature suddenly in a cave environment, ore minerals were formed concentratedly while water and other materials such as CO2 evaporated quickly, resulting less alteration of host rocks.
文摘By means of multivariance analysis and finite element on the basis of the analysis of generation andevolution of structural systems and structural system of syn-metallogenesis in the orefield,the authorsmade a research into the interrelation between tecto-geochemistry and structural stress field,revealedthe mechanism of metallogenesis by magma and ore-forming fluids driven under dynamic forces,andproposed a tecto-geochemistry model for the formation of the ore deposits,so as to suggest a basis oftheory for the prognoses of location and magnitude of hidden deposits.
基金中国地质调查局发展研究中心课题“安徽省宣城矿集区深部找矿预测”(编号:DD2019057004)安徽省公益性地质工作项目“1∶50000洪镇(H50 E 009012)+1 种基金安庆市幅(H50 E 009013)深部矿产地质调查”(编号:2023-g-1-3)国家自然科学基金项目“数据驱动与相似度推理知识嵌入的可扩展岩石图像识别研究”(编号:42372342)联合资助。
基金granted by the Geological Survey Program of China Geological Survey (Grant No.1212011086074 and 12120113036500)
文摘The Bangong Lake-Nujiang River metallogenic belt is located between the Qiangtang Block and Lhasa Block, and the Duolong ore concentration area is located in the western section of the Bangong Lake-Nujiang River metallogenic belt. Till now, several large and super large copper-gold deposits, such as Duobuza, Bolong, Dibaonamugang, Naruo and Rongna deposits have been discovered in this area, mainly porphyry copper-gold ones.
