A full-frequency instant core-loss equation built from the induction physical model of magnetic materials, where the iron loss, eddy loss, and hysteresis loss no longer have an integral term, and this new equation pro...A full-frequency instant core-loss equation built from the induction physical model of magnetic materials, where the iron loss, eddy loss, and hysteresis loss no longer have an integral term, and this new equation provides high simulation accuracy and performs dynamic core loss analysis on non-sinusoidal or pulse magnetic fields. The simulation examples use a high-grade electrical steel sheet 65CS400 by Epstein experimental data covering magnetic field 0.1 - 1.8 T and frequency 50 - 5000 Hz, and the average error of the simulated core loss is less than 4%. Since the simulation is converged by magnetic physical parameters, so the physical relevance of the similar laminated materials can be compared with the coefficient results. .展开更多
Medium density fiberboard (MDF) is a highly competitive wooden material especially in office furniture industry. Damage and failure occur frequently in MDF due to low mechanical properties. In the present work, a modi...Medium density fiberboard (MDF) is a highly competitive wooden material especially in office furniture industry. Damage and failure occur frequently in MDF due to low mechanical properties. In the present work, a modification was performed to enhance fracture properties of MDF. The MDF plate/core was inserted into two layers (face sheet) of glass fiber composite laminates using hand layup technique. Face sheet/core delamination involves the separation of a face sheet from the core material in a sandwich MDF. Therefore, delamination test using double cantilever beam (DCB) specimen was carried out. The test measured the debonding fracture toughness (GIC) or separation strength between face sheet material (glass fiber/epoxy laminates) with MDF core material. The test is based on compliance strategy measuring fracture toughness (GIC). It was found that the fracture toughness was increased. Extended finite element model (XFEM) based on virtual crack closer technique (VCCT) was constructed to simulate the delamination behaviors of face sheet/core materials. The model results were in good agreement with the experimental ones.展开更多
CW-CO2 laser nitriding technique was applied to improve the properties （such as aging property and the core loss） of grain oriented silicon steel. The samples were nitrided with regular space. Laser power density an...CW-CO2 laser nitriding technique was applied to improve the properties （such as aging property and the core loss） of grain oriented silicon steel. The samples were nitrided with regular space. Laser power density and scanning speed were chosen as 7.8×10^5W·cm^-2 and 100mm·min^-1. By some laser irradiation, Fe4N and Fe3N were formed in the nitrided zone. The nitrided samples were annealed at the temperatures ranged from 100 to 90℃. The core loss of some interested samples was tested. The results show that the core loss of the nitrided samples with different thickness of 0.23 and 0.30mm decreased by 14.9% and 9.4% respectively, and the aging property were improved up to 800℃. The mechanism of laser nitriding to improve the properties of grain oriented silicon steel is discussed.展开更多
A 51.85-m tim core collected from site DT001 （accumulation rate 127 kgm^-2a^-1, mean annual temperature -33.1 ℃） on Princess Elizabeth Land, East Antarctica, during the 1996-97 Chinese First Antarctic Inland Expedi...A 51.85-m tim core collected from site DT001 （accumulation rate 127 kgm^-2a^-1, mean annual temperature -33.1 ℃） on Princess Elizabeth Land, East Antarctica, during the 1996-97 Chinese First Antarctic Inland Expedition has been analyzed for chemical composition and oxygen isotope ratio. A comparison between the seasonal variations of major ions was carried out in order to reduce the dating uncertainty, using the volcanic markers as time constrains. A deposition period of 251 years was determined. The calculated accumulation rates display an increasing trend before 1820, while after 1820, the trend of the accumulation is not obvious. Overall, temperature change in the region shows a slight increasing trend over the past 250 years. But, notably, a temperature decline of -2 ℃ is observed from 1860 to the present. This feature, at odds with the warming trend over the past century recorded in both hemispheres, likely reflects a regional characteristic related to the lack of a high latitude/low latitude link in the Southern Hemisphere circulation patterns. The results of the glaciochemical records of the firn core show that the mean concentrations of Cl^-, Na^＋ and Mg^2＋ are similar to those reported from other sites in East Antarctica. However, the mean concentration of Ca^2＋ is much higher than that reported from other regions, suggesting the influence of the strong local terrestrial sources in Princess Elizabeth Land. There is no evidence of a positive correlation between NO3^- concentrations and solar activity （11-year solar cycle and solar cycle length）, although solar proton events may account for some of the NO3^- peak values in the record.展开更多
为研究火灾后预应力混凝土空心板采用粘贴碳纤维布加固前后的力学性能和破坏形态,进行8块受火后加固的预应力混凝土空心板的静载试验研究,并考虑15,30,45和60 min 4种不同受火时间。研究结果表明:粘贴CFRP布加固受火损伤预制空心板能有...为研究火灾后预应力混凝土空心板采用粘贴碳纤维布加固前后的力学性能和破坏形态,进行8块受火后加固的预应力混凝土空心板的静载试验研究,并考虑15,30,45和60 min 4种不同受火时间。研究结果表明:粘贴CFRP布加固受火损伤预制空心板能有效抑制其开裂并显著提高承载力,但破坏模式由加固前的弯曲破坏转变为剪切破坏;受火加固试件初始弯曲刚度小于未受火对比试件的弯曲刚度,但后期弯曲刚度明显大于未受火对比试件的弯曲刚度。展开更多
文摘A full-frequency instant core-loss equation built from the induction physical model of magnetic materials, where the iron loss, eddy loss, and hysteresis loss no longer have an integral term, and this new equation provides high simulation accuracy and performs dynamic core loss analysis on non-sinusoidal or pulse magnetic fields. The simulation examples use a high-grade electrical steel sheet 65CS400 by Epstein experimental data covering magnetic field 0.1 - 1.8 T and frequency 50 - 5000 Hz, and the average error of the simulated core loss is less than 4%. Since the simulation is converged by magnetic physical parameters, so the physical relevance of the similar laminated materials can be compared with the coefficient results. .
文摘Medium density fiberboard (MDF) is a highly competitive wooden material especially in office furniture industry. Damage and failure occur frequently in MDF due to low mechanical properties. In the present work, a modification was performed to enhance fracture properties of MDF. The MDF plate/core was inserted into two layers (face sheet) of glass fiber composite laminates using hand layup technique. Face sheet/core delamination involves the separation of a face sheet from the core material in a sandwich MDF. Therefore, delamination test using double cantilever beam (DCB) specimen was carried out. The test measured the debonding fracture toughness (GIC) or separation strength between face sheet material (glass fiber/epoxy laminates) with MDF core material. The test is based on compliance strategy measuring fracture toughness (GIC). It was found that the fracture toughness was increased. Extended finite element model (XFEM) based on virtual crack closer technique (VCCT) was constructed to simulate the delamination behaviors of face sheet/core materials. The model results were in good agreement with the experimental ones.
基金supported by the National Natural Science Foundation of China(No.50174020).
文摘CW-CO2 laser nitriding technique was applied to improve the properties （such as aging property and the core loss） of grain oriented silicon steel. The samples were nitrided with regular space. Laser power density and scanning speed were chosen as 7.8×10^5W·cm^-2 and 100mm·min^-1. By some laser irradiation, Fe4N and Fe3N were formed in the nitrided zone. The nitrided samples were annealed at the temperatures ranged from 100 to 90℃. The core loss of some interested samples was tested. The results show that the core loss of the nitrided samples with different thickness of 0.23 and 0.30mm decreased by 14.9% and 9.4% respectively, and the aging property were improved up to 800℃. The mechanism of laser nitriding to improve the properties of grain oriented silicon steel is discussed.
基金The Key International Cooperation Project of the Ministry of Science and Technology of China, No. 2001CB711003 Knowledge Innovation Project of CAS, No.KZCX3-SW-354
文摘A 51.85-m tim core collected from site DT001 （accumulation rate 127 kgm^-2a^-1, mean annual temperature -33.1 ℃） on Princess Elizabeth Land, East Antarctica, during the 1996-97 Chinese First Antarctic Inland Expedition has been analyzed for chemical composition and oxygen isotope ratio. A comparison between the seasonal variations of major ions was carried out in order to reduce the dating uncertainty, using the volcanic markers as time constrains. A deposition period of 251 years was determined. The calculated accumulation rates display an increasing trend before 1820, while after 1820, the trend of the accumulation is not obvious. Overall, temperature change in the region shows a slight increasing trend over the past 250 years. But, notably, a temperature decline of -2 ℃ is observed from 1860 to the present. This feature, at odds with the warming trend over the past century recorded in both hemispheres, likely reflects a regional characteristic related to the lack of a high latitude/low latitude link in the Southern Hemisphere circulation patterns. The results of the glaciochemical records of the firn core show that the mean concentrations of Cl^-, Na^＋ and Mg^2＋ are similar to those reported from other sites in East Antarctica. However, the mean concentration of Ca^2＋ is much higher than that reported from other regions, suggesting the influence of the strong local terrestrial sources in Princess Elizabeth Land. There is no evidence of a positive correlation between NO3^- concentrations and solar activity （11-year solar cycle and solar cycle length）, although solar proton events may account for some of the NO3^- peak values in the record.
文摘为研究火灾后预应力混凝土空心板采用粘贴碳纤维布加固前后的力学性能和破坏形态,进行8块受火后加固的预应力混凝土空心板的静载试验研究,并考虑15,30,45和60 min 4种不同受火时间。研究结果表明:粘贴CFRP布加固受火损伤预制空心板能有效抑制其开裂并显著提高承载力,但破坏模式由加固前的弯曲破坏转变为剪切破坏;受火加固试件初始弯曲刚度小于未受火对比试件的弯曲刚度,但后期弯曲刚度明显大于未受火对比试件的弯曲刚度。
