Transient responses of double-curved sandwich two-layer shells resting on Kerr's foundations with laminated three-phase polymer/GNP/fiber surface and auxetic honeycomb core subjected to the blast load

This work uses refined first-order shear theory to analyze the free vibration and transient responses of double-curved sandwich two-layer shells made of auxetic honeycomb core and laminated three-phase polymer/GNP/fiber surface subjected to the blast load.Each of the two layers that make up the double-curved shell structure is made up of an auxetic honeycomb core and two laminated sheets of three-phase polymer/GNP/fiber.The exterior is supported by a Kerr elastic foundation with three characteristics.The key innovation of the proposed theory is that the transverse shear stresses are zero at two free surfaces of each layer.In contrast to previous first-order shear deformation theories,no shear correction factor is required.Navier's exact solution was used to treat the double-curved shell problem with a single title boundary,while the finite element technique and an eight-node quadrilateral were used to address the other boundary requirements.To ensure the accuracy of these results,a thorough comparison technique is employed in conjunction with credible statements.The problem model's edge cases allow for this kind of analysis.The study's findings may be used in the post-construction evaluation of military and civil works structures for their ability to sustain explosive loads.In addition,this is also an important basis for the calculation and design of shell structures made of smart materials when subjected to shock waves or explosive loads.

Enhancing electromagnetic wave absorption with core‐shell structured SiO_(2)@MXene@MoS_(2)nanospheres

Material composition and structural design are important factors influencing the electromagnetic wave(EMW)absorption performance of materials.To alleviate the impedance mismatch attributed to the high dielectric constant of Ti_(3)C_(2)T_(x)MXene,we have successfully synthesized core‐shell structured SiO_(2)@MXene@MoS_(2)nanospheres.This architecture,comprising SiO_(2)as the core,MXene as the intermediate layer,and MoS_(2)as the outer shell,is achieved through an electrostatic self‐assembly method combined with a hydrothermal process.This complex core‐shell structure not only provides a variety of loss mechanisms that effectively dissipate electromagnetic energy but also prevents self‐aggregation of MXene and MoS_(2)nanosheets.Notably,the synergistic combination of SiO_(2)and MoS_(2)with highly conductive MXene enables the suitable dielectric constant of the composites,ensuring optimal impedance matching.Therefore,the core‐shell structured SiO_(2)@MXene@MoS_(2)nanospheres exhibit excellent EMW absorption performance,featuring a remarkable minimum reflection loss(RL_(min))of−52.11 dB(2.4 mm).It is noteworthy that these nanospheres achieve an ultra‐wide effective absorption bandwidth(EAB)of 6.72 GHz.This work provides a novel approach for designing and synthesizing high‐performance EMW absorbers characterized by“wide bandwidth and strong reflection loss.”

Control and vibration analyses of a sandwich doubly curved micro-composite shell with honeycomb,truss,and corrugated cores based on the fourth-order shear deformation theory

Curved shells are increasingly utilized in applied engineering due to their shared characteristics with other sandwich structures,flexibility,and attractive appearance.However,the inability of controlling and regulating vibrations and destroying them afterward is a challenge to scientists.In this paper,the curve shell equations and a linear quadratic regulator are adopted for the state feedback design to manage the structure vibrations in state space forms.A five-layer sandwich doubly curved micro-composite shell,comprising two piezoelectric layers for the sensor and actuator,is modeled by the fourth-order shear deformation theory.The core(honeycomb,truss,and corrugated)is analyzed for the bearing of transverse shear forces.The results show that the honeycomb core has a greater effect on the vibrations.When the parameters related to the core and the weight percentage of graphene increase,the frequency increases.The uniform distribution of graphene platelets results in the lowest natural frequency while the natural frequency increases.Furthermore,without taking into account the piezoelectric layers,the third-order shear deformation theory(TSDT)and fourth-order shear deformation theory(FOSDT)align closely.However,when the piezoelectric layers are incorporated,these two theories diverge significantly,with the frequencies in the FOSDT being lower than those in the TSDT.

Facile in situ synthesis and characterization of Fe@Si/zeolite Na composites with magnetic core–shell structures from natural materials for enhanced curcumin loading capacity

Curcumin is a natural polyphenol that is used in various traditional medicines.However,its inherent properties,such as its rapid degradation and metabolism,low bioavailability,and short half-life,are serious problems that must be resolved.To this end,a drug carrier incorporating natural magnetic cores in a zeolite framework was developed and applied to the loading of curcumin in ethanol solutions.In this system,curcumin is encapsulated in a zeolite Na(ZNA)magnetic core–shell structure(Fe@Si/ZNA),which can be easily synthesized using an in situ method.Synthesis of Fe_(3)O_(4) nanoparticles was carried out from natural materials using a co-precipitation method.Analysis of the prepared magnetic core–shell structures and composites was carried out using vibrating-sample magnetometery,Fourier transform infrared spectroscopy,transmission electron microscopy,and x-ray diffraction.The cumulative loading of curcumin in the ZNA composite with 9%nanoparticles was found to reach 90.70%with a relatively long half-life of 32.49 min.Stability tests of curcumin loading in the composite showed that adding magnetic particles to the zeolite framework also increased the stability of the composite structure.Adsorption kinetics and isotherm studies also found that the system follows the pseudo-second-order and Langmuir isotherm models.

Heterostructural NiFeW disulfide and hydroxide dual‐trimetallic core‐shell nanosheets for synergistically effective water oxidatio

A stable and highly active core‐shell heterostructure electrocatalyst is essential for catalyzing oxygen evolution reaction(OER).Here,a dual‐trimetallic core‐shell heterostructure OER electrocatalyst that consists of a NiFeWS_(2)inner core and an amorphous NiFeW(OH)_(z)outer shell is designed and synthesized using in situ electrochemical tuning.The electrochemical measurements of different as‐synthesized catalysts with a similar mass loading suggest that the core‐shell Ni_(0.66)Fe_(0.17)W_(0.17)S_(2)@amorphous NiFeW(OH)_(z)nanosheets exhibit the highest overall performance compared with that of other bimetallic reference catalysts for the OER.Additionally,the nanosheet arrays were in situ grown on hydrophilic‐treated carbon paper to fabricate an integrated three‐dimensional electrode that affords a current density of 10 mA cm^(−2)at a small overpotential of 182 mV and a low Tafel slope of 35 mV decade^(−1)in basic media.The Faradaic efficiency of core‐shell Ni_(0.66)Fe_(0.17)W_(0.17)S_(2)@amorphous NiFeW(OH)_(z)is as high as 99.5%for OER.The scanning electron microscope,transmission electron microscope,and X‐ray photoelectron spectroscopy analyses confirm that this electrode has excellent stability in morphology and elementary composition after long‐term electrochemical measurements.Importantly,density functional theory calculations further indicate that the core‐shell heterojunction increased the conductivity of the catalyst,optimized the adsorption energy of the OER intermediates,and improved the OER activity.This study provides a universal strategy for designing more active core‐shell structure electrocatalysts based on the rule of coordinated regulation between electronic transport and active sites.

Preparation of Self-crosslinked Fluorocarbon Polymer Emulsion with Core-shell Structure by the Method of Soap-free Emulsion Polymerization

Using methyl methacrylate （MMA）, butyl acrylate（BA） and hexafluorobutyl acrylate（HFBA） as main raw materials, we prepared self-crosslinked fluorocarbon polymer emulsion with core-shell structure via soap-free emulsion polymerization when the conception of particle design and polymer morphology was adopted. Moreover, the influence of mole ratio of BA to MAA, pH value on the oligomer was studied. And the effects of the added amount of oligomer, self-crosslinked monomer and HFBA, mass ratio of BA to MMA, reaction temperature and the initiator on the polymerization technology and the performance of the product, were investigated and optimized. The structure and performance of the fluorocarbon polymer emulsion were characterized and tested with FTIR, TEM, MFT and contact angle and water absorption of the latex film. The experimental results show that the optimal conditions for preparing fluorocarbon polymer emulsion are as follows： for preparing the oligomer, tool ratio of BA to MAA is equal to 1.0 ： 1.60, and pH value is controlled within the range of 8.0 and 9.0; for preparing fluorocarbon polymer emulsion, the added amount of oligmer[P（BA/MANa）] is 6%; mass ratio of BA to MMA is 40 ＂ 60; the added amount of self-crosslinked monomer is 2%, the added amount of HFBA is 15 %; reaction temperature is 80 ℃; the mixture of potassium persulfate and sodium bisulfite is used as the initiator. The film-forming stability of the fluorocarbon polymer emul- sion and the performance of the latex film, which is prepared with the soap-free emulsion polymerization, are better than that prepared with the conventional emulsion polymerization.

A Novel Approach to Prepare Core/Shell Polymer Latex Particles with High Sulphonate Contents

Crosslinked x-P（St-MAA） seed latex was first prepared via soap-free emulsion copolymerization of styrene （St） and methyl methacrylic acid （MAA） with divinyl benzene as crosslinker and ammonium persulfate as initiator, and x-P（St-MAA）/x-P（St-NaSS） core/shell latex particles were then synthesized through a novel seeded emulsion copolymerization of St and sodium styrene sulphonate （NaSS） in the presence of water-soluble crosslinker N,N＇-methylene bisacrylamide （BAA） using oil-soluble 2,2-azobis isobutyronitrile as initiator. TEM observation indicated that narrow dispersed core/shell latex particles were obtained, and element analysis showed that NaSS unit content in the whole particle and in the shell reached 22.8 wt% and 51.2 wt%, respectively.

NARROW-DISPERSED CROSSLINKED CORE-SHELL POLYMER MICROSPHERES PREPARED BY SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION

Grafting of polystyrene with narrowly dispersed polymer microspheres through surface-initiated atom transferradical polymerization(ATRP)was investigated.Polydivinylbenzene(PDVB)microspheres were prepared by dispersionpolymerization with poly(N-vinyl pyrrolidone)(PVP)as stabilizer.The surfaces of PDVB microspheres werechloromethylated by chloromethyl methyl ether in the presence of zinc chloride as catalyst to form chloromethylbenzeneinitiating core sites for subsequent ATRP grafting of styrene using CuCl/bpy as catalytic system.Polystyrene was found to begrafted not only from the particle surfaces but also from within a thin shell layer,resulting in the formation of particles sizeincreased from 2.38-2.58 μm,which can further grow to 2.93 μm during secondary grafting polymerization of styrene.Thisdemonstrates that grafting polymerization proceeds through a typical ATRP procedure with living nature.All of the preparedmicrospheres have narrow particle size distribution with coefficient of variation around 10%.

MICRON CORE-SHELL PARTICLES PREPARED BY GRAFTING POLYMERIZATION OF METHYL METHACRYLATE FROM NARROW DISPERSE SURFACE OF CHLOROMETHYLATED POLYDIVINYLBENZENE VIA ATRP

Grafting of poly(methyl methacrylate)from narrow disperse polymer particles by surface-initiated atom transferradical polymerization(ATRP)was investigated.Polydivinylbenzene(PDVB)particles were prepared by dispersionpolymerization with poly(N-vinyl pyrrolidone)(PVP)as the stabilizer.Chloromethylated PDVB was used as initiating coresites for subsequent ATRP of methyl methacrylate with CuBr/bpy as catalyst system.It was found that poly(methylmethacrylate)was grafted not only from the particle surfaces but also from within a thin shell layer,leading to particles sizeincreases from 2.38-3.00 μm with a core-shell structure particles.The grafted core-shell particles were characterized withFTIR,SEM,DSC.

Synthesis of core-shell structured polymers with inserted thioether from a multi-functional scaffold

The synthesis of a thioether inserted, core-shell structured polymer from the scaffold of hyperbranched polyglycerol (PG) was described. PG was first allyl functionalized, and in the presence of AlBN, the allyl groups further underwent radical addition to thiol compounds, thus thiol functional polyethylene oxide monomether (MPEO) were grafted onto PG. Similarly, 2-mercaptoethylammonium chloride was introduced onto PG via thiol addition, and the residual amino groups were further quaternized with decyl bromide, leading to an amphiphilic core-shell structure polymer. (c) 2007 De Cheng Wan. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Synthesis and Characterization of Poly (Methyl Methacrylate)/Polyethylenimine Grafting Core-Shell Nanoparticles for CO2 Adsorption Using Soap-Free Emulsion Copolymerization

Unlike previous emulsion polymerization, we used grafting reactions in soap-free emulsion systems. In this study, we synthesized grafted PMMA/PEI core-shell nanoparticles by varying the MMA/PEI content and molecular weight of PEI (Mn = 600, 8000, and 10,000). The size and morphology of the core-shell nanoparticles were characterized by a particle size analyzer and scanning electron microscopy. The nanoparticles were 178 - 408 nm in diameter and swelled in water or methanol by 30 - 75 nm. The size of the nanoparticles increased with MMA contents, whereas the size distribution progressively became homogeneous with increasing molecular weight of PEI. Lastly, we measured CO2 adsorption capacity of the grafted PMMA/PEI core-shell nanoparticles, and we found the capacity to be limited at a level of 0.69 mg, which occurred for nanoparticles prepared from emulsions at a pH value of 11.

A core-shell copper oxides-cobalt oxides heterostructure nanowire arrays for nitrate reduction to ammonia with high yield rate

Electrochemical nitrate reduction to ammonia(NRA) can realize the green synthesis of ammonia(NH3) at ambient conditions, and also remove nitrate contamination in water. However, the current catalysts for NRA still face relatively low NH3yield rate and poor stability. We present here a core-shell heterostructure comprising cobalt oxide anchored on copper oxide nanowire arrays(CuO NWAs@Co_(3)O_(4)) for efficient NRA. The CuO NWAs@Co_(3)O_(4)demonstrates significantly enhanced NRA performance in alkaline media in comparison with plain CuO NWAs and Co_(3)O_(4)flocs. Especially, at-0.23 V vs. RHE, NH_(3) yield rate of the CuO NWAs@Co_(3)O_(4)reaches 1.915 mmol h^(-1)cm^(-2),much higher than those of CuO NWAs(1.472 mmol h^(-1)cm^(-2)), Co_(3)O_(4)flocs(1.222 mmol h^(-1)cm^(-2)) and recent reported Cu-based catalysts.It is proposed that the synergetic effects of the heterostructure combing atom hydrogen adsorption and nitrate reduction lead to the enhanced NRA performance.

Polarization properties of elliptical core non-hexagonal symmetry polymer photonic crystal fibre

In this paper, polarization properties and propagation characteristics of polymer photonic crystal fibres with elliptical core and non-hexagonal symmetry structure are investigated by using the full vectorial plane wave method. The results show that the birefringence of the fibre is induced by asymmetries of both the cladding and the core. Moreover, by adjusting the non-symmetrical ratio factor of cladding η from 0.4 to 1 in step 0.1, we find the optimized design parameters of the fibre with high birefringence and limited polarization mode dispersion, operating in a single mode regime at an appropriate wavelength range. The range of wavelength approaches the visible and near-infrared which is consistent with the communication windows of polymer optical fibres.

Wrinkling in graded core/shell systems using symplectic formulation

Wrinkles in flat graded elastic layers have been recently described as a timevarying Hamiltonian system by the energy method.Cylindrical core/shell structures can also undergo surface instabilities under the external pressure.In this study,we show that by treating the radial direction as a pseudo-time variable,the graded core/shell system with radially decaying elastic properties can also be described within the symplectic framework.In combination with the shell buckling equation,the present paper addresses the surface wrinkling of graded core/shell structures subjected to the uniform external pressure by solving a series of ordinary differential equations with varying coefficients.Three representative gradient distributions are showcased,and the predicted critical pressure and critical wave number are verified by finite element simulations.The symplectic framework provides an efficient and accurate approach to understand the surface instability and morphological evolution in curved biological tissues and engineered structures.

Structural Analysis of TiC and TiC-C Core-Shell Nanostructures Produced by Pulsed-Laser Ablation

This paper reports on the ablation process of a pure Ti solid target immersed in a C-enriched acetone solution, leading to the production of titanium carbide (TiC) and Ti-C core-shell nanostructures. The used route of synthesis is generally called pulsed laser ablation in liquid (PLAL). The presence of carbon structures in the solution contributed to the carbon content in the produced Ti-based nanomaterials. The atomic composition of the produced nanostructures was analyzed using SEM-EDS, while TEM micrographs revealed the formation of spherical TiC and core-shell nanostructures ranging from 40 to 100 nm. The identification of atomic planes by HRTEM confirmed a 10 nm diameter C-shell with a graphite structure surrounding the Ti-core. Raman spectroscopy allowed for the identification of D and G peaks for graphite and a Raman signal at 380 and 600 cm−1, assigned to TiC. The results contribute to the state-of-the-art production of TiC and Ti-C core-shell nanostructures using the PLAL route.

Highly-Controllable Imprinted Polymer Nanoshell on the Surface of Silica Nanoparticles for Selective Adsorption of 17<i>β</i>-Estradiol

A highly-controllable core-shell silica-MIPs absorbent by anchoring a MIPs layer to the surface of SiO2 nanoparticles via a surface molecular imprinting process was prepared. The templates were covalently modified with functional monomers to form precursor EstSi. The latter together with coupling reagent KH-570, were grafted onto the surface of SiO2 nanoparticles before polymerization, to ensure the quantity and quality of imprinted sites on the surface of the covalently attached matrix. The as-synthesized core-shell nanomaterials (SiO2@MIP2) were then evaluated for selective adsorption of 17β-estradiol (E2) with Raman spectra as detection method. The results indicate that SiO2@MIP2 can fast and selectively adsorb E2 from structural analogues, with detection limit of 0.01 μmol/l.

Two-Photon Fluorescence Properties and Ultrafast Responses of a Hyperbranched Diketo-Pyrrolo-Pyrrole Polymer with Triphenylamine as the Core

The two-photon fluorescence properties and ultrafast responses of a hyperbranched polyyne （hb-DPP-J2） with triphenylamine as the central core, Diketo-Pyrrolo-Pyrrole as the connecting unit and electron acceptor are studied. The polymer has a D-π-A-π-D conjugated structure along the extended polyyne w-bridge systems, and the effective condugated unit repeats itself in the whole hyperbranehed polymer chain. The polymer exhibits a large two-photon absorption cross section and high fluorescence quantum yields. The ultrafast dynamic results give a deep understanding of the excited energy transfer processes under excitation, and reveal a long relaxation lifetime of the intramolecular charge transfer （ICT） state.

Au_(core)Co_(shell)纳米粒子的制备、表征及其表面增强拉曼光谱研究

AucoreCoshell nanoparticles with different shell thicknesses were prepared by using chemical reduction method and characterized by scanning electron microscopy（SEM） and cyclic voltammetry（CV）. The results reveal that the prepared core-shell nanoparticles were covered by Co shell and exhibited the similar electrochemistry property with the Co nanoparticles surface. Surface enhanced Raman spectroscopy（SERS） activities of these nanoparticles were studied by using pyridine as a probe molecule. It was found that the SERS intensity depended on the Co shell thickness of the core-shell nanoparticles and was weakened with the increasing shell thickness. The SERS intensity of these AucoreCoshell nanoparticles is found to be about twenty times higher than that obtained on an electrochemically roughened cobalt electrode.

Fe_(core)-Pt_(shell)/C核壳型纳米催化剂电催化还原氧的性能

应用两步化学还原法合成不同壳层厚度的Fecore-Ptshell纳米粒子,并用SEM、TEM、EDS和XRD手段对其进行物理表征,应用动电位、交流阻抗和循环伏安法进行氧还原电催化活性及抗甲醇性测试。结果表明,样品Fecore-Ptshell纳米颗粒粒径分布集中,其中Fecore,1-Ptshell,0.5平均值为50nm,核芯直径约34nm,壳层厚度约8nm;与Pt/C相比,Fecore-Ptshell/C对氧还原的催化活性和抗甲醇性明显提高,Fe与Pt原子比为1:0.5的Fecore-Ptshell/C在0.5mol·L-1H2SO4中氧还原的最大峰电流密度可达到184.7mA·mg-1,是相同反应条件下Pt/C电流密度的1.45倍,抗甲醇性显著提高。