Using methyl methacrylate （MMA）, butyl acrylate（BA） and hexafluorobutyl acrylate（HFBA） as main raw materials, we prepared self-crosslinked fluorocarbon polymer emulsion with core-shell structure via soap-free em...Using methyl methacrylate （MMA）, butyl acrylate（BA） and hexafluorobutyl acrylate（HFBA） as main raw materials, we prepared self-crosslinked fluorocarbon polymer emulsion with core-shell structure via soap-free emulsion polymerization when the conception of particle design and polymer morphology was adopted. Moreover, the influence of mole ratio of BA to MAA, pH value on the oligomer was studied. And the effects of the added amount of oligomer, self-crosslinked monomer and HFBA, mass ratio of BA to MMA, reaction temperature and the initiator on the polymerization technology and the performance of the product, were investigated and optimized. The structure and performance of the fluorocarbon polymer emulsion were characterized and tested with FTIR, TEM, MFT and contact angle and water absorption of the latex film. The experimental results show that the optimal conditions for preparing fluorocarbon polymer emulsion are as follows： for preparing the oligomer, tool ratio of BA to MAA is equal to 1.0 ： 1.60, and pH value is controlled within the range of 8.0 and 9.0; for preparing fluorocarbon polymer emulsion, the added amount of oligmer[P（BA/MANa）] is 6%; mass ratio of BA to MMA is 40 ＂ 60; the added amount of self-crosslinked monomer is 2%, the added amount of HFBA is 15 %; reaction temperature is 80 ℃; the mixture of potassium persulfate and sodium bisulfite is used as the initiator. The film-forming stability of the fluorocarbon polymer emul- sion and the performance of the latex film, which is prepared with the soap-free emulsion polymerization, are better than that prepared with the conventional emulsion polymerization.展开更多
This investigation deals with the free radical polymerization both of (2-methacryloyloxyethyl) trimethyl ammonium chloride (QACEMA) and of diallyldimethyl ammonium chloride (DADMAC) in inverse emulsion. The influences...This investigation deals with the free radical polymerization both of (2-methacryloyloxyethyl) trimethyl ammonium chloride (QACEMA) and of diallyldimethyl ammonium chloride (DADMAC) in inverse emulsion. The influences of some factors, such as the concentration of monomers, initiator and emulsifier are discussed. The polymerization rate equations of above two monomers can be written as follows: R(p) = k[M](1.21)[I](0.82)[E](0.57) (for QACEMA) R(p) = k'[M](1.34)[I](0.90)[E](0.62) (for DADMAC)展开更多
The kinetics of suspended emulsion polymerization of methyl methacrylate (MMA), in which water acted as the dispersed phase and the mixture of NMA and cyclohexane as the continuous phase, was investigated. It showed t...The kinetics of suspended emulsion polymerization of methyl methacrylate (MMA), in which water acted as the dispersed phase and the mixture of NMA and cyclohexane as the continuous phase, was investigated. It showed that the initial polymerization rate (R-p0) and steady-state polymerization rate (R-p) were proportional to the mass ratio between water and oil phase, and increased as the polymerization temperature, the potassium persulphate concentration ([I]) and the Tween20 emulsifier concentration ([S]) increased. The relationships between the polymerization rate and [I] and [S] were obtained as follows: R-p0 proportional to [I](0.73)[S](0.32) and R-p proportional to [I](0.71)[S](0.23). The above exponents were close to those obtained from normal MMA emulsion polymerization. It also showed that the average molecular weight of the resulting poly(methyl methacrylate) decreased as the polymerization temperature, [I] and [S] increased. Thus, MMA suspended emulsion polymerization could be considered as a combination of many miniature emulsion polymerizations proceeding in water drops and obeyed the classical kinetics of MMA emulsion polymerization.展开更多
Monodispersed microspheres with polystyrene as the core and poly（acrylamide-co-N-acryloxysuccinirnide） as the shell were synthesized by a two-step surfactant-free emulsion copolymerization.The core-shell morphology ...Monodispersed microspheres with polystyrene as the core and poly（acrylamide-co-N-acryloxysuccinirnide） as the shell were synthesized by a two-step surfactant-free emulsion copolymerization.The core-shell morphology of the microspheres was shown by scanning electron microscopy and transmission electron microscopy.Rabbit immunoglobulin G （as antigen） was covalently coupled onto the microspheres by the reaction between succinimide-activated ester groups on the shell of the microspheres and amino groups of the antigen molecules.The size of particles was characterized by dynamic light scattering technique and was found to vary upon bioconjugation and interaction with proteins.The binding process was shown to be specific to goat anti-rabbit immunoglobulin G（as antibody） and reversible upon the addition of free antigen into the system.展开更多
基金Funded by the Jiangsu Provincial Creative Fund for Scientific and Tech-nical Small and Medium-size Enterprise
文摘Using methyl methacrylate （MMA）, butyl acrylate（BA） and hexafluorobutyl acrylate（HFBA） as main raw materials, we prepared self-crosslinked fluorocarbon polymer emulsion with core-shell structure via soap-free emulsion polymerization when the conception of particle design and polymer morphology was adopted. Moreover, the influence of mole ratio of BA to MAA, pH value on the oligomer was studied. And the effects of the added amount of oligomer, self-crosslinked monomer and HFBA, mass ratio of BA to MMA, reaction temperature and the initiator on the polymerization technology and the performance of the product, were investigated and optimized. The structure and performance of the fluorocarbon polymer emulsion were characterized and tested with FTIR, TEM, MFT and contact angle and water absorption of the latex film. The experimental results show that the optimal conditions for preparing fluorocarbon polymer emulsion are as follows： for preparing the oligomer, tool ratio of BA to MAA is equal to 1.0 ： 1.60, and pH value is controlled within the range of 8.0 and 9.0; for preparing fluorocarbon polymer emulsion, the added amount of oligmer[P（BA/MANa）] is 6%; mass ratio of BA to MMA is 40 ＂ 60; the added amount of self-crosslinked monomer is 2%, the added amount of HFBA is 15 %; reaction temperature is 80 ℃; the mixture of potassium persulfate and sodium bisulfite is used as the initiator. The film-forming stability of the fluorocarbon polymer emul- sion and the performance of the latex film, which is prepared with the soap-free emulsion polymerization, are better than that prepared with the conventional emulsion polymerization.
基金This project is supported by Tianjin Science Foundation for Youths.
文摘This investigation deals with the free radical polymerization both of (2-methacryloyloxyethyl) trimethyl ammonium chloride (QACEMA) and of diallyldimethyl ammonium chloride (DADMAC) in inverse emulsion. The influences of some factors, such as the concentration of monomers, initiator and emulsifier are discussed. The polymerization rate equations of above two monomers can be written as follows: R(p) = k[M](1.21)[I](0.82)[E](0.57) (for QACEMA) R(p) = k'[M](1.34)[I](0.90)[E](0.62) (for DADMAC)
基金This work was supported by the National Natural Science Foundation of China (No. 29906009).
文摘The kinetics of suspended emulsion polymerization of methyl methacrylate (MMA), in which water acted as the dispersed phase and the mixture of NMA and cyclohexane as the continuous phase, was investigated. It showed that the initial polymerization rate (R-p0) and steady-state polymerization rate (R-p) were proportional to the mass ratio between water and oil phase, and increased as the polymerization temperature, the potassium persulphate concentration ([I]) and the Tween20 emulsifier concentration ([S]) increased. The relationships between the polymerization rate and [I] and [S] were obtained as follows: R-p0 proportional to [I](0.73)[S](0.32) and R-p proportional to [I](0.71)[S](0.23). The above exponents were close to those obtained from normal MMA emulsion polymerization. It also showed that the average molecular weight of the resulting poly(methyl methacrylate) decreased as the polymerization temperature, [I] and [S] increased. Thus, MMA suspended emulsion polymerization could be considered as a combination of many miniature emulsion polymerizations proceeding in water drops and obeyed the classical kinetics of MMA emulsion polymerization.
基金supported by the National Natural Science Foundation of China(Nos.20328407,50673045) and the Canada Research Chair program
文摘Monodispersed microspheres with polystyrene as the core and poly（acrylamide-co-N-acryloxysuccinirnide） as the shell were synthesized by a two-step surfactant-free emulsion copolymerization.The core-shell morphology of the microspheres was shown by scanning electron microscopy and transmission electron microscopy.Rabbit immunoglobulin G （as antigen） was covalently coupled onto the microspheres by the reaction between succinimide-activated ester groups on the shell of the microspheres and amino groups of the antigen molecules.The size of particles was characterized by dynamic light scattering technique and was found to vary upon bioconjugation and interaction with proteins.The binding process was shown to be specific to goat anti-rabbit immunoglobulin G（as antibody） and reversible upon the addition of free antigen into the system.
