Corner stall predictions are important and difficult in axial compressors.However,all of the prediction models have proved to be ineffective for advanced compressor blades,which tend to use the combined sweep and dihe...Corner stall predictions are important and difficult in axial compressors.However,all of the prediction models have proved to be ineffective for advanced compressor blades,which tend to use the combined sweep and dihedral.As for the prediction parameter DL,although it effectively modeled the effects of the adverse pressure gradient and secondary flow,it failed to predict the corner stall of curved blades because the model failed to consider the intersection of the boundary layer at the corner region.In this paper,the shape factor gradientψof the boundary layer at the corner region was investigated by numerically studying specially shaped expansion pipes under different adverse pressure gradients.The improved prediction parameter DJ was presented based on the model of ψ and the circumferential pressure gradient ζ.A comparison of the critical range of the prediction parameters DL and DJ was investigated using the NACA65 cascade database,which was established by a numerical method.Then,the stall criterion was validated according to the experimental results of various test facilities with different blade geometries and experimental conditions.The results show that the improved prediction parameter is able to predict the corner separation/stall flows and is in good agreement with the experimental results for axial compressors with three-dimensional designed blades.展开更多
The outlet flow fields of a low-speed repeating-stage compressor with bowed stator stages are measured with five-hole probe under the near stall condition when the rotor/stator axial gap varies. The performances of th...The outlet flow fields of a low-speed repeating-stage compressor with bowed stator stages are measured with five-hole probe under the near stall condition when the rotor/stator axial gap varies. The performances of the straight stator stages are investigated and compared to those of the bowed stator stages. The results show that using bowed stator stages could alleviate the flow separation at both upper and low corners of the suction surface and the endwalls, and decrease the losses along the flow passage as well as the outlet flow angle. As the rotor/stator axial gap decreases, although the diffusion capacity of the compressor increases obviously, the outlet flow field in the straight stator stages deteriorates quickly. By contrast, little changes occur in the bowed stator stages, indicating that as the rotor/stator axial gap decreases, improved performance is achieved in the bowed stator stages.展开更多
Corner stall receives noticeable attention in the aeroengine field as an important phenomenon in highly-load compressors.Non-uniform leading-edge tubercles,as an effective method to delay stall,are introduced into the...Corner stall receives noticeable attention in the aeroengine field as an important phenomenon in highly-load compressors.Non-uniform leading-edge tubercles,as an effective method to delay stall,are introduced into the compressor.In this paper,the shape of leading-edge tubercles was controlled by a third-order Fourier function.To judge corner stall,a more precise stall indicator for compressor cascade with flow control methods was defined.Besides,the total kinetic energy of the secondary flow at large incidence was adopted as a parameter for stall evaluation to save computing resources.The results of multiobjective optimization reveal that the loss coefficient exhibited negligible variation at design incidence,while the total kinetic energy of secondary flow showed a significant reduction at large incidence,resulting in a substantial increase in stall incidence.In the optimal profiling cases,the stall incidencewas delayed from 7.9°to 11.6°.The major purpose of the research is to provide proper design guidelines for nonuniformleading-edge tubercles and uncover the flow controlmechanisms of leading-edge profiling.Hence,the geometric features that meet different optimization objectives were extracted through geometric analysis near the Pareto Front and through Self-OrganizingMap(SOM)dataminingmethods in the optimization database.Besides,flow field analysis reveals the flow control mechanism of leading-edge tubercles.The convex-concave-convex structure at the 0%-70%blade height region can form two branches of leading-edge vortex pairs that are opposite in the rotation direction to the passage vortex.The two branches of leading-edge vortex pairs mixed with the leading-edge separation vortex to form two stronger mixed vortices,which can effectively suppress the development of passage vortex and delay stall incidence.展开更多
基金supported by the National Natural Science Foundation of China (No. 51676015)
文摘Corner stall predictions are important and difficult in axial compressors.However,all of the prediction models have proved to be ineffective for advanced compressor blades,which tend to use the combined sweep and dihedral.As for the prediction parameter DL,although it effectively modeled the effects of the adverse pressure gradient and secondary flow,it failed to predict the corner stall of curved blades because the model failed to consider the intersection of the boundary layer at the corner region.In this paper,the shape factor gradientψof the boundary layer at the corner region was investigated by numerically studying specially shaped expansion pipes under different adverse pressure gradients.The improved prediction parameter DJ was presented based on the model of ψ and the circumferential pressure gradient ζ.A comparison of the critical range of the prediction parameters DL and DJ was investigated using the NACA65 cascade database,which was established by a numerical method.Then,the stall criterion was validated according to the experimental results of various test facilities with different blade geometries and experimental conditions.The results show that the improved prediction parameter is able to predict the corner separation/stall flows and is in good agreement with the experimental results for axial compressors with three-dimensional designed blades.
基金National Natural Science Foundation of China (50646021)Chinese Specialized Research Fund for the Doctoral Pro-gram of Higher Education (20060213007)
文摘The outlet flow fields of a low-speed repeating-stage compressor with bowed stator stages are measured with five-hole probe under the near stall condition when the rotor/stator axial gap varies. The performances of the straight stator stages are investigated and compared to those of the bowed stator stages. The results show that using bowed stator stages could alleviate the flow separation at both upper and low corners of the suction surface and the endwalls, and decrease the losses along the flow passage as well as the outlet flow angle. As the rotor/stator axial gap decreases, although the diffusion capacity of the compressor increases obviously, the outlet flow field in the straight stator stages deteriorates quickly. By contrast, little changes occur in the bowed stator stages, indicating that as the rotor/stator axial gap decreases, improved performance is achieved in the bowed stator stages.
基金support by the National Natural Science Foundation of China(No.52076179).
文摘Corner stall receives noticeable attention in the aeroengine field as an important phenomenon in highly-load compressors.Non-uniform leading-edge tubercles,as an effective method to delay stall,are introduced into the compressor.In this paper,the shape of leading-edge tubercles was controlled by a third-order Fourier function.To judge corner stall,a more precise stall indicator for compressor cascade with flow control methods was defined.Besides,the total kinetic energy of the secondary flow at large incidence was adopted as a parameter for stall evaluation to save computing resources.The results of multiobjective optimization reveal that the loss coefficient exhibited negligible variation at design incidence,while the total kinetic energy of secondary flow showed a significant reduction at large incidence,resulting in a substantial increase in stall incidence.In the optimal profiling cases,the stall incidencewas delayed from 7.9°to 11.6°.The major purpose of the research is to provide proper design guidelines for nonuniformleading-edge tubercles and uncover the flow controlmechanisms of leading-edge profiling.Hence,the geometric features that meet different optimization objectives were extracted through geometric analysis near the Pareto Front and through Self-OrganizingMap(SOM)dataminingmethods in the optimization database.Besides,flow field analysis reveals the flow control mechanism of leading-edge tubercles.The convex-concave-convex structure at the 0%-70%blade height region can form two branches of leading-edge vortex pairs that are opposite in the rotation direction to the passage vortex.The two branches of leading-edge vortex pairs mixed with the leading-edge separation vortex to form two stronger mixed vortices,which can effectively suppress the development of passage vortex and delay stall incidence.
