Femtosecond time-resolved fluorescence non-collinear optical parametric amplification spec- troscopy can extract the curve of spectral gain from its parametric superfluorescence. This unique spectrum correction method...Femtosecond time-resolved fluorescence non-collinear optical parametric amplification spec- troscopy can extract the curve of spectral gain from its parametric superfluorescence. This unique spectrum correction method enables fluorescence non-collinear optical parametric amplification spectroscopy acquiring the genuine transient fluorescence spectrum of the studied system. In this work we employ fluorescence non-collinear optical parametric amplification spectroscopy technique to study the solvation dynamics of DCM dye in ethanol solution, and confirm that genuine solvation correlation function and shift of peak frequency can be derived from transient fluorescence spectra after the spectral gain correction. It demonstrates that fluorescence non-collinear optical parametric amplification spectroscopy can benefit the research fields, which focuses on both fluorescence intensity dynamics and fluorescence spectral shape evolution.展开更多
The algorithm of dense spectrum correction has been raised and proved based on the correction of discrete spectrum by fast Fourier transform.The result of simulation shows that such algorithm has advantages of high ac...The algorithm of dense spectrum correction has been raised and proved based on the correction of discrete spectrum by fast Fourier transform.The result of simulation shows that such algorithm has advantages of high accuracy and small amount of calculation.The algorithm has been successfully applied to the analysis of vibration signals from internal combustion engine.To calculate discrete spectrum,fast Fourier transform has been used to calculate the discrete spectrum by the signals acquired by the sensors on the oil pan,and the signal has been extracted from the mixed signals.展开更多
As a discrete spectrum correction method, the Fourier transform (FT) continuous zoom analysis method is widely used in vibration signal analysis, but little effort had been made on this method's anti-noise performa...As a discrete spectrum correction method, the Fourier transform (FT) continuous zoom analysis method is widely used in vibration signal analysis, but little effort had been made on this method's anti-noise performance. It is widely believed that the analysis accuracy of the method can be substantially improved by increasing the zoom multiple, however, with the zoom multiple increases, the frequency estimation accuracy may decline sometimes in practices. Aiming at the problems above, this paper analyzes the sources of frequency estimation error when a harmonic signal mixed with and without noise is processed using the FT continuous zoom analysis. According to the characteristics that the local maximum of the zoom spectrum may be wrongly selected when the signal is corrupted with noise, the number of wrongly selected spectrum lines is deduced under different signal-to-noise ratio and local zoom multiple, and then the maximum frequency estimation error is given accordingly. The validity of the presented analysis is confirmed by simulations results. The frequency estimation accuracy of this method will not improve any more under the influence of noise, and there is a best zoom multiple, when the zoom multiple is larger than the best zoom multiple; the maximum frequency estimation error will fluctuate back and forth. The best zoom multiple curves under different signal-to-noise ratios given provide a theoretical basis for the choice of the appropriate zoom multiples of the FT continuous zoom analysis method in engineering applications.展开更多
Relaxation time spectra (RTS) derived from time domain induced polarization data (TDIP) are helpful to assess oil reservoir pore structures. However, due to the sensitivity to the signal-to-noise ratio (SNR), th...Relaxation time spectra (RTS) derived from time domain induced polarization data (TDIP) are helpful to assess oil reservoir pore structures. However, due to the sensitivity to the signal-to-noise ratio (SNR), the inversion accuracy of the traditional singular value decomposition (SVD) inversion method reduces with a decrease of SNR. In order to enhance the inversion accuracy and improve robustness of the inversion method to the SNR, an improved inversion method, based on damping factor and spectrum component residual correction, is proposed in this study. The numerical inversion results show that the oscillation of the RTS derived from the SVD method increased with a decrease of SNR, which makes it impossible to get accurate inversion components. However, the SNR has little influence on inversion components of the improved method, and the RTS has high inversion accuracy and robustness. Moreover, RTS derived from core sample data is basically in accord with the pore-size distribution curve, and the RTS derived from the actual induced polarization logging data is smooth and continuous, which indicates that the improved method is practicable.展开更多
Many spectrum correction methods have been developed, but their performance degrades significantly when they are applied to the correction of low frequency component ( LFC ). It owns to that the model underlying the...Many spectrum correction methods have been developed, but their performance degrades significantly when they are applied to the correction of low frequency component ( LFC ). It owns to that the model underlying the conventional approaches neglects the interference of the negative frequency in the real signal. A new approach for the correction of the LFC is proposed, which suits all kinds of symmetrical windows. It divides a signal into three sections and makes use of the first spectrum line of each section. Then this approach is modified so that it is also applicable to the correction of the high frequency component. Thus a timedelay-based all-frequency correction method is proposed. The simulation results show that this method is simple and feasible. By this method, the accurate frequency, amplitude and phase of the spectral line can be obtained whether it is close to or far from OHz.展开更多
<div style="text-align:justify;"> As a generalized sensor, the RPC model with its accuracy equally matches the physical sensor model. Moreover, the accurate positioning combining with the flexibility i...<div style="text-align:justify;"> As a generalized sensor, the RPC model with its accuracy equally matches the physical sensor model. Moreover, the accurate positioning combining with the flexibility in application leads the RPC model to be the priority in photogrammetry processing. Generally, the RPC model is calculated through a control grid. Different RPC parameters solving methods and the operation efficiency all serve as variables in the accuracy of the model. In this paper, the ridge estimation iterative method, spectrum correction iteration, and conjugate gradient method are employed to solve RPC parameters;the accuracy and efficiency of three solving methods are analyzed and compared. The results show that ridge estimation iterative method and spectrum correction iteration have obvious advantages in accuracy. The ridge estimation iterative method has fewer iteration times and time con-sumption, and spectrum correction iteration has more stable precision. </div>展开更多
The Cramer–Rao lower bound on range error is modeled for pseudo-random ranging systems using Geiger-mode avalanche photodiodes. The theoretical results are shown to agree with the Monte Carlo simulation, satisfying b...The Cramer–Rao lower bound on range error is modeled for pseudo-random ranging systems using Geiger-mode avalanche photodiodes. The theoretical results are shown to agree with the Monte Carlo simulation, satisfying boundary evaluations. Experimental tests prove that range errors caused by the fluctuation of the number of photon counts in the laser echo pulse leads to the range drift of the time point spread function. The function relationship between the range error and the photon counting ratio is determined by using numerical fitting.Range errors due to a different echo energy is calibrated so that the corrected range root mean square error is improved to 1 cm.展开更多
文摘Femtosecond time-resolved fluorescence non-collinear optical parametric amplification spec- troscopy can extract the curve of spectral gain from its parametric superfluorescence. This unique spectrum correction method enables fluorescence non-collinear optical parametric amplification spectroscopy acquiring the genuine transient fluorescence spectrum of the studied system. In this work we employ fluorescence non-collinear optical parametric amplification spectroscopy technique to study the solvation dynamics of DCM dye in ethanol solution, and confirm that genuine solvation correlation function and shift of peak frequency can be derived from transient fluorescence spectra after the spectral gain correction. It demonstrates that fluorescence non-collinear optical parametric amplification spectroscopy can benefit the research fields, which focuses on both fluorescence intensity dynamics and fluorescence spectral shape evolution.
基金Project(51176045) supported by the National Natural Science Foundation of China
文摘The algorithm of dense spectrum correction has been raised and proved based on the correction of discrete spectrum by fast Fourier transform.The result of simulation shows that such algorithm has advantages of high accuracy and small amount of calculation.The algorithm has been successfully applied to the analysis of vibration signals from internal combustion engine.To calculate discrete spectrum,fast Fourier transform has been used to calculate the discrete spectrum by the signals acquired by the sensors on the oil pan,and the signal has been extracted from the mixed signals.
基金supported by National Natural Science Foundation of China (Grant No. 50875085, Grant No. 50605021, and Grant No. 51075150)Guangdong Provincial Natural Science Foundation of China (Grant No. 91510641010000320)
文摘As a discrete spectrum correction method, the Fourier transform (FT) continuous zoom analysis method is widely used in vibration signal analysis, but little effort had been made on this method's anti-noise performance. It is widely believed that the analysis accuracy of the method can be substantially improved by increasing the zoom multiple, however, with the zoom multiple increases, the frequency estimation accuracy may decline sometimes in practices. Aiming at the problems above, this paper analyzes the sources of frequency estimation error when a harmonic signal mixed with and without noise is processed using the FT continuous zoom analysis. According to the characteristics that the local maximum of the zoom spectrum may be wrongly selected when the signal is corrupted with noise, the number of wrongly selected spectrum lines is deduced under different signal-to-noise ratio and local zoom multiple, and then the maximum frequency estimation error is given accordingly. The validity of the presented analysis is confirmed by simulations results. The frequency estimation accuracy of this method will not improve any more under the influence of noise, and there is a best zoom multiple, when the zoom multiple is larger than the best zoom multiple; the maximum frequency estimation error will fluctuate back and forth. The best zoom multiple curves under different signal-to-noise ratios given provide a theoretical basis for the choice of the appropriate zoom multiples of the FT continuous zoom analysis method in engineering applications.
基金supported by a project from the Youth Science Foundation of the National Natural Science Foundation of China (11104089)
文摘Relaxation time spectra (RTS) derived from time domain induced polarization data (TDIP) are helpful to assess oil reservoir pore structures. However, due to the sensitivity to the signal-to-noise ratio (SNR), the inversion accuracy of the traditional singular value decomposition (SVD) inversion method reduces with a decrease of SNR. In order to enhance the inversion accuracy and improve robustness of the inversion method to the SNR, an improved inversion method, based on damping factor and spectrum component residual correction, is proposed in this study. The numerical inversion results show that the oscillation of the RTS derived from the SVD method increased with a decrease of SNR, which makes it impossible to get accurate inversion components. However, the SNR has little influence on inversion components of the improved method, and the RTS has high inversion accuracy and robustness. Moreover, RTS derived from core sample data is basically in accord with the pore-size distribution curve, and the RTS derived from the actual induced polarization logging data is smooth and continuous, which indicates that the improved method is practicable.
文摘Many spectrum correction methods have been developed, but their performance degrades significantly when they are applied to the correction of low frequency component ( LFC ). It owns to that the model underlying the conventional approaches neglects the interference of the negative frequency in the real signal. A new approach for the correction of the LFC is proposed, which suits all kinds of symmetrical windows. It divides a signal into three sections and makes use of the first spectrum line of each section. Then this approach is modified so that it is also applicable to the correction of the high frequency component. Thus a timedelay-based all-frequency correction method is proposed. The simulation results show that this method is simple and feasible. By this method, the accurate frequency, amplitude and phase of the spectral line can be obtained whether it is close to or far from OHz.
文摘<div style="text-align:justify;"> As a generalized sensor, the RPC model with its accuracy equally matches the physical sensor model. Moreover, the accurate positioning combining with the flexibility in application leads the RPC model to be the priority in photogrammetry processing. Generally, the RPC model is calculated through a control grid. Different RPC parameters solving methods and the operation efficiency all serve as variables in the accuracy of the model. In this paper, the ridge estimation iterative method, spectrum correction iteration, and conjugate gradient method are employed to solve RPC parameters;the accuracy and efficiency of three solving methods are analyzed and compared. The results show that ridge estimation iterative method and spectrum correction iteration have obvious advantages in accuracy. The ridge estimation iterative method has fewer iteration times and time con-sumption, and spectrum correction iteration has more stable precision. </div>
基金supported by the National Natural Science Foundation of China(Nos.61101196 and 61271332)the Natural Science Research Foundation of Jiangsu Province(No.168JB510015)
文摘The Cramer–Rao lower bound on range error is modeled for pseudo-random ranging systems using Geiger-mode avalanche photodiodes. The theoretical results are shown to agree with the Monte Carlo simulation, satisfying boundary evaluations. Experimental tests prove that range errors caused by the fluctuation of the number of photon counts in the laser echo pulse leads to the range drift of the time point spread function. The function relationship between the range error and the photon counting ratio is determined by using numerical fitting.Range errors due to a different echo energy is calibrated so that the corrected range root mean square error is improved to 1 cm.