Research on the Relationship between Income and Consumption of the Urban Residents in Hunan Province on the Basis of Error Correction Model

By using error correction model, I conduct co-integration analysis on the research of the relationship between the per capita practical consumption and per capita practical disposable income of urban residents in Hunan Province from 1978 to 2009. The results show that there is a co-integration relationship between the per capita practical consumption and the practical per capita disposable income of urban residents, and based on these, the corresponding error correction model is established. Finally, corresponding countermeasures and suggestions are put forward as follows: broaden the income channel of urban residents; create goods consuming environment; perfect socialist security system.

Power output correction model of narrow linewidth ring fiber laser filtered with whispering gallery mode resonator

A whispering gallery mode resonator(WGMR)filter can narrow laser linewidth while significantly changing the output power characteristics of fiber laser system.It is found that traditional laser output power model is invalid.We report a correction model of a narrow linewidth fiber laser filtered with a WGMR to analyze its power.We believe that the loss of the laser system and the threshold gain increase caused by the WGMR filter lead to the predominate amplified spontaneous emission during the original laser period.According to that,we assume the correction coefficient is an exponential decay related to the Er-doped fiber length in the large loss situation,and we verify it experimentally.As a result,the correction model is valid for WGMR-filtered fiber laser.

Real-time model correction using Kalman filter for Raman-controlled cell culture processes

Raman spectroscopy has found extensive use in monitoring and controlling cell culture processes.In this context,the prediction accuracy of Raman-based models is of paramount importance.However,models established with data from manually fed-batch cultures often exhibit poor performance in Raman-controlled cultures.Thus,there is a need for effective methods to rectify these models.The objective of this paper is to investigate the efficacy of Kalman filter(KF)algorithm in correcting Raman-based models during cell culture.Initially,partial least squares(PLS)models for different components were constructed using data from manually fed-batch cultures,and the predictive performance of these models was compared.Subsequently,various correction methods including the PLS-KF-KF method proposed in this study were employed to refine the PLS models.Finally,a case study involving the auto-control of glucose concentration demonstrated the application of optimal model correction method.The results indicated that the original PLS models exhibited differential performance between manually fed-batch cultures and Raman-controlled cultures.For glucose,the root mean square error of prediction(RMSEP)of manually fed-batch culture and Raman-controlled culture was 0.23 and 0.40 g·L^(-1).With the implementation of model correction methods,there was a significant improvement in model performance within Raman-controlled cultures.The RMSEP for glucose from updating-PLS,KF-PLS,and PLS-KF-KF was 0.38,0.36 and 0.17 g·L^(-1),respectively.Notably,the proposed PLS-KF-KF model correction method was found to be more effective and stable,playing a vital role in the automated nutrient feeding of cell cultures.

Correction of Corporation Value Assessment Model Based on Corporate Social Responsibility

The performance of corporate social responsibility is conducive to the con- tinuous improvement of their profitability, and promotes the upgrading of corporation value. However, it is difficult to confirm, calculate and check the costs and benefits brought by the implementation of corporate social responsibility under the current ac- counting theory system, so it is difficult to estimate whether the fulfillment of corpo- rate social responsibility has any effects on the corporation value assessment. Therefore, based on corporate social responsibility, the correction mode of corpora- tion value assessment is put forward.

A Robust Conformer-Based Speech Recognition Model for Mandarin Air Traffic Control

This study aims to address the deviation in downstream tasks caused by inaccurate recognition results when applying Automatic Speech Recognition(ASR)technology in the Air Traffic Control(ATC)field.This paper presents a novel cascaded model architecture,namely Conformer-CTC/Attention-T5(CCAT),to build a highly accurate and robust ATC speech recognition model.To tackle the challenges posed by noise and fast speech rate in ATC,the Conformer model is employed to extract robust and discriminative speech representations from raw waveforms.On the decoding side,the Attention mechanism is integrated to facilitate precise alignment between input features and output characters.The Text-To-Text Transfer Transformer(T5)language model is also introduced to handle particular pronunciations and code-mixing issues,providing more accurate and concise textual output for downstream tasks.To enhance the model’s robustness,transfer learning and data augmentation techniques are utilized in the training strategy.The model’s performance is optimized by performing hyperparameter tunings,such as adjusting the number of attention heads,encoder layers,and the weights of the loss function.The experimental results demonstrate the significant contributions of data augmentation,hyperparameter tuning,and error correction models to the overall model performance.On the Our ATC Corpus dataset,the proposed model achieves a Character Error Rate(CER)of 3.44%,representing a 3.64%improvement compared to the baseline model.Moreover,the effectiveness of the proposed model is validated on two publicly available datasets.On the AISHELL-1 dataset,the CCAT model achieves a CER of 3.42%,showcasing a 1.23%improvement over the baseline model.Similarly,on the LibriSpeech dataset,the CCAT model achieves a Word Error Rate(WER)of 5.27%,demonstrating a performance improvement of 7.67%compared to the baseline model.Additionally,this paper proposes an evaluation criterion for assessing the robustness of ATC speech recognition systems.In robustness evaluation experiments based on this criterion,the proposed model demonstrates a performance improvement of 22%compared to the baseline model.

An Online Model Correction Method Based on an Inverse Problem:Part I—Model Error Estimation by Iteration

Errors inevitably exist in numerical weather prediction （NWP） due to imperfect numeric and physical parameterizations. To eliminate these errors, by considering NWP as an inverse problem, an unknown term in the prediction equations can be estimated inversely by using the past data, which are presumed to represent the imperfection of the NWP model （model error, denoted as ME）. In this first paper of a two-part series, an iteration method for obtaining the MEs in past intervals is presented, and the results from testing its convergence in idealized experiments are reported. Moreover, two batches of iteration tests were applied in the global forecast system of the Global and Regional Assimilation and Prediction System （GRAPES-GFS） for July-August 2009 and January-February 2010. The datasets associated with the initial conditions and sea surface temperature （SST） were both based on NCEP （National Centers for Environmental Prediction） FNL （final） data. The results showed that 6th h forecast errors were reduced to 10% of their original value after a 20-step iteration. Then, off-line forecast error corrections were estimated linearly based on the 2-month mean MEs and compared with forecast errors. The estimated error corrections agreed well with the forecast errors, but the linear growth rate of the estimation was steeper than the forecast error. The advantage of this iteration method is that the MEs can provide the foundation for online correction. A larger proportion of the forecast errors can be expected to be canceled out by properly introducing the model error correction into GRAPES-GFS.

Parameters Sensitivity Analysis and Correction for Concrete Damage Plastic Model

In order to understand the effect of hardening ductility parameters and softening ductility parameters of the concrete damage plastic model in LS-DYNA,a sensitivity and reliability analysis of these parameters through a convenient cube unit test was conducted. The results showed that the peak strength strain was independent of the hardening ductility parameter DH,but affected by AH,BH,and CH. The softening ductility was mainly related to the softening ductility parameter AS,but not affected by the damage ductility exponent BS. In case that the model with default parameters failed to match the AS-controlled damage softening phase,an optimized model with an AS correction was developed. The corrected model with the AS value of 2 matched well with the code model,and exhibited good feasibility in predicting the stress-strain curve of different grades of concrete. Moreover,the practicability of the corrected model was further validated by the conventional triaxial test. The simulated curve exhibited favorable consistence with the trial curve. Therefore,the model with parameter correction could provide a prospective reference for predicting the mechanical properties of concrete.

An Online Model Correction Method Based on an Inverse Problem:PartⅡ——Systematic Model Error Correction

An online systematic error correction is presented and examined as a technique to improve the accuracy of real-time numerical weather prediction, based on the dataset of model errors （MEs） in past intervals. Given the analyses, the ME in each interval （6 h） between two analyses can be iteratively obtained by introducing an unknown tendency term into the prediction equation, shown in Part I of this two-paper series. In this part, after analyzing the 5-year （2001-2005） GRAPES- GFS （Global Forecast System of the Global and Regional Assimilation and Prediction System） error patterns and evolution, a systematic model error correction is given based on the least-squares approach by firstly using the past MEs. To test the correction, we applied the approach in GRAPES-GFS for July 2009 and January 2010. The datasets associated with the initial condition and SST used in this study were based on NCEP （National Centers for Environmental Prediction） FNL （final） data. The results indicated that the Northern Hemispheric systematically underestimated equator-to-pole geopotential gradient and westerly wind of GRAPES-GFS were largely enhanced, and the biases of temperature and wind in the tropics were strongly reduced. Therefore, the correction results in a more skillful forecast with lower mean bias and root-mean-square error and higher anomaly correlation coefficient.

Design of weak current measurement system and research on temperature impact

A dedicated weak current measurement system was designed to measure the weak currents generated by the neutron ionization chamber.This system incorporates a second-order low-pass filter circuit and the Kalman filtering algorithm to effectively filter out noise and minimize interference in the measurement results.Testing conducted under normal temperature conditions has demonstrated the system's high precision performance.However,it was observed that temperature variations can affect the measurement performance.Data were collected across temperatures ranging from -20 to 70℃,and a temperature correction model was established through linear regression fitting to address this issue.The feasibility of the temperature correction model was confirmed at temperatures of -5 and 40℃,where relative errors remained below 0.1% after applying the temperature correction.The research indicates that the designed measurement system exhibits excellent temperature adaptability and high precision,making it particularly suitable for measuring weak currents.

China’s Monetary Policy Impacts on Money and Stock Markets

This study investigated the impact of China’s monetary policy on both the money market and stock markets,assuming that non-policy variables would not respond contemporaneously to changes in policy variables.Monetary policy adjustments are swiftly observed in money markets and gradually extend to the stock market.The study examined the effects of monetary policy shocks using three primary instruments:interest rate policy,reserve requirement ratio,and open market operations.Monthly data from 2007 to 2013 were analyzed using vector error correction(VEC)models.The findings suggest a likely presence of long-lasting and stable relationships among monetary policy,the money market,and stock markets.This research holds practical implications for Chinese policymakers,particularly in managing the challenges associated with fluctuation risks linked to high foreign exchange reserves,aiming to achieve autonomy in monetary policy and formulate effective monetary strategies to stimulate economic growth.

Relationship Between Agricultural Credits and Agricultural Economy Based on Error Correct Model in Heilongjiang Province

Heilongjiang is a large agriculture province.Problems of agriculture,rural areas and farmers are urgent to be solved.The development of agriculture needs the support of agricultural credits,because finance is the center of agriculture economy.However,the low comparative advantage in agriculture and pursuit of the capital interests which aggravate the conflicts of supply and demand of agricultural funds.Lacking of fund is the main factor that constrains the development of agricultural economy.In order to analyze the economic effect of agricultural credits on agricultural economy,an error correction model was set up to research the relationship between them,which based on the least square methods.Through the study of the contribution from agricultural credits to total value of agricultural out-put,the empirical evidence for developing the rural financial vigorously was provided,in order to promote the agricultura leconomic development.

Capital mobility in Latin American and Caribbean countries: new evidence from dynamic common correlated effects panel data modeling

This study investigates the degree of capital mobility in a panel of 16 Latin American and 4 Caribbean countries during 1960 to 2017 against the backdrop of the Feldstein-Horioka hypothesis by applying recent panel data techniques.This is the first study on capital mobility in Latin American and Caribbean countries to employ the recently developed panel data procedure of the dynamic common correlated effects modeling technique of Chudik and Pesaran(J Econ 188:393–420,2015)and the error-correction testing of Gengenbach,Urbain,and Westerlund(Panel error correction testing with global stochastic trends,2008,J Appl Econ 31:982–1004,2016).These approaches address the serious panel data econometric issues of crosssection dependence,slope heterogeneity,nonstationarity,and endogeneity in a multifactor error-structure framework.The empirical findings of this study reveal a low average(mean)savings–retention coefficient for the panel as a whole and for most individual countries,as well as indicating a cointegration relationship between saving and investment ratios.The results indicate that there is a relatively high degree of capital mobility in the Latin American and Caribbean countries in the short run,while the long-run solvency condition is maintained,which is due to reduced frictions in goods and services markets causing increase competition.Increased capital mobility in these countries can promote economic growth and hasten the process of globalization by creating a conducive economic environment for FDI in these countries.

Analytical modeling of sandwich beam for piezoelectric bender elements

Piezoelectric bender elements are widely used as electromechanical sensors and actuators, An analytical sandwich beam model for piezoelectric bender elements was developed based on the first-order shear deformation theory （FSDT）, which assumes a single rotation angle for the whole cross-section and a quadratic distribution function for coupled electric potential in piezoelectric layers, and corrects the effect of transverse shear strain on the electric displacement integration. Free vibration analysis of simplysupported bender elements was carried out and the numerical results showed that, solutions of the present model for various thickness-to-length ratios are compared well with the exact two-dimensional solutions, which presents an efficient and accurate model for analyzing dynamic electromechanical responses of bender elements.

An automatic unified modeling method of geological object and engineering object based on tri-prism(TP)

For the interaction relation between geological object and engineering object in some fields related to water conservancy and hydropower, a unified modeling idea was proposed. On the basis of summarizing both advantages and disadvantages of existing modeling methods, an automatic unified modeling method of both engineering and geological objects based on tri-prism(TP) model was presented. Through the lossless correction algorithm of deviated drill holes contained in this method, the real deviated drill holes could be corrected into the equivalent virtual vertical ones. And the correction accuracy fully meets the requirements of unified modeling. With the virtual vertical drilling data, TIN construction of both cover layer and other stratums would be built in order to obtain the 3D geological model. Then, the engineering design data would be introduced into the 3D geological model for achieving unified modeling. For this process, the volume subdividing and restructuring principles were introduced to deal with the spatial relationships between engineering object and geological object. In order to improve the efficiency of unified modeling, the reconstruction of TIN based on constraint information was also applied in this method. At last, the feasibility and validation of the unified modeling method as well as its relevant key algorithms were verified by specific experiments and analysis of results.

Water level updating model for flow calculation of river networks

Complex water movement and insufficient observation stations are the unfavorable factors in improving the accuracy of flow calculation of river networks. A water level updating model for river networks was set up based on a three-step method at key nodes, and model correction values were collected from gauge stations. To improve the accuracy of water level and discharge forecasts for the entire network, the discrete coefficients of the Saint-Venant equations for river sections were regarded as the media carrying the correction values from observation locations to other cross-sections of the river network system. To examine the applicability, the updating model was applied to flow calculation of an ideal river network and the Chengtong section of the Yangtze River. Comparison of the forecast results with the observed data demonstrates that this updating model can improve the forecast accuracy in both ideal and real river networks.

Cointegration analysis with structural changes between consumption and economic growth in China

In order to investigate the existence of a stable long-run equilibrium relationship between economic growth and consumption in China, the relationship between the gross domestic product （GDP） and consumption in China was investigated by the cointegration analysis method. Using the Engle-Granger （EG） test and considering the possibility of structural changes, the impact of external economic shocks on the long-run equilibrium relationship between economic growth and consumption in China was analyzed. Analysis results show that without considering structural changes, the EG test cannot detect cointegration in the series subjected to structural changes; in considering structural changes, cointegration is successfully detected by specifying the dummy variable. In addition, the error correction models were constructed in different periods. This study verifies the existence of a long-run equilibrium relationship between economic growth and consumption in China, and this relationship has significantly changed in 1989 and 1997, respectively.

GRA BASED ANALYSIS ON FACTORS INFLUENCING CO_2 EMISSIONS IN CHINA

How to achieve the objective of reducing CO2 emissions has been an academic focus in China recently. The factors influencing CO2 emissions are the vital issue to accomplish the arduous target. Firstly, three influential factors, the energy consumption, the proportion of tertiary industry in gross domestic product （GDP）, and the degree of dependence on foreign trade, are carefully selected, since all of them have closer grey relation with China＇s COz emissions compared with others when the grey relational analysis （GRA） method is applied. The study highlights co-integration relation of these four variables using the co-integration analysis method. And then a long-term co-integration equation and a short-term error correction model of China＇s CO2 emissions are devel- oped. Finally, the comparison is exerted between the forecast value and the actual value of China＇s CO2 emissions based on error correction model. The results and the relevant statistics tests show that the pro- posed model has better explanation capability and credibility.

Analysis of services trade and employment in China by co-integration and causality

This article describes a study by co-integration test and Granger causality test on the relationships between China's services trades and employment using the data of services trade from the WTO website and the employment data from China Statistic Yearbook for the years from 1982 to 2003. Co-integration test showed that 1% increase in export value and import value of services created respectively 0.205% and 0.068 7% more job opportunities in the service sector. Both export and import of services impacted positively on employment in service industry, and export did more than import. However, in the short run, the impacts of services export and import on employment in service industry were both very small, though positive; and the impacts of employment in service industry on both export and import of services were very big, but not stable. Granger causality test indicated that employment in service industry was a Granger cause of services export. The findings highlight the importance of facilitating services import and reducing import barriers, and suggest that the competitiveness of China's labor- intensive services trade can be exploited to boost services export and help employment in service sector, and that the structure of services trade should be optimized by shifting from labor-intensive to knowledge-and technology-intensive services thus to enhance China's competitiveness of services export.

Assessing the spillover effects of U.S.monetary policy normalization on Nigeria sovereign bond yield

This study examines the spillover effects of U.S.monetary policy normalization on Nigeria 10-Year Treasury bond yield between 2011 and 2017,using the vector error correction model approach.Our results reveal that domestic factors,such as exchange rate and inflation,rather than the U.S.10-Year sovereign bond yield,are the key drivers of Nigeria 10-Year bond yield.Additionally,the spillover effect from the U.S.monetary policy was amplified by oil price shocks and changes in Nigeria’s monetary policy rates.Our counterfactual analysis confirms the findings.

Soft-Sensing Method of Water Temperature Measurement for Controlled Cooling System

Aiming at the water temperature measuring problem for controlled cooling system of rolling plant,a new water temperature measuring method based on soft-sensing method with a water temperature model of on-line self correction parameter was built.A water temperature compensation factor model was also built to improve coiling temperature control precision.It was proved that the model meets production requirements.The soft-sensing technique has extensive applications in the field of metal forming.