Laser-induced breakdown spectroscopy(LIBS)has been used for soil analysis,but its measurement accuracy is often influenced by matrix effects of different kinds of soils.In this work,a method for matrix effect suppress...Laser-induced breakdown spectroscopy(LIBS)has been used for soil analysis,but its measurement accuracy is often influenced by matrix effects of different kinds of soils.In this work,a method for matrix effect suppressing was developed using laser-induced plasma acoustic signals to correct the original spectrum,thereby improving the analysis accuracy of the soil elements.A good linear relationship was investigated firstly between the original spectral intensity and the acoustic signals.The relative standard deviations(RSDs)of Mg,Ca,Sr,and Ba elements were then calculated for both the original spectrum and the spectrum with the acoustic correction,and the RSDs were significantly reduced with the acoustic correction.Finally,calibration curves of MgⅠ285.213 nm,CaⅠ422.673 nm,SrⅠ460.733 nm and BaⅡ455.403 nm were established to assess the analytical performance of the proposed acoustic correction method.The values of the determination coefficient(R~2)of the calibration curves for Mg,Ca,Sr,and Ba elements,corrected by the acoustic amplitude,are improved from 0.9845,0.9588,0.6165,and 0.6490 to 0.9876,0.9677,0.8768,and 0.8209,respectively.The values of R~2 of the calibration curves corrected by the acoustic energy are further improved to 0.9917,0.9827,0.8835,and 0.8694,respectively.These results suggest that the matrix effect of LIBS on soils can be clearly improved by using acoustic correction,and acoustic energy correction works more efficiently than acoustic amplitude correction.This work provides a simple and efficient method for correcting matrix effects in the element analysis of soils by acoustic signals.展开更多
ΔF-N curves are usually used to predict the fatigue life of spot welding in engineering,but they are time-consuming and laborious and not universal.For the purpose of predicting the fatigue life of spot welding accur...ΔF-N curves are usually used to predict the fatigue life of spot welding in engineering,but they are time-consuming and laborious and not universal.For the purpose of predicting the fatigue life of spot welding accurately and efficiently,tensile-shear fatigue tests were conducted to obtain the fatigue life of spot-welded specimens with different sheet thicknesses combinations.These specimens were simulated by using the finite element method,and the structural stress was theoretically calculated.In the double logarithmic coordinate system,the structural stress-fatigue life(S-N)curve of spot welding was fitted by the least-squares method,based on the quasi-Newton method.The square of the correlation coefficient of the S-N curve was taken as the optimization objective,with the correction coefficients of force,bending moment,spot welding diameter,and sheet thickness as the variables.During the optimization process,three different ways were utilized to get three optimized spot welding S-N curves,which are suitable for different situations.The results show that the fitting effect of the S-N curve is improved,the data points are more compact,and the optimization effect is significant.These S-N curves can be used to predict the fatigue life,which provide the basis for practical engineering application.展开更多
AIM： To use the cumulative sum analysis score（CUSUM） to construct objectively the learning curve of phacoemulsification competency.METHODS： Three second-year residents and an experienced consultant were monitored ...AIM： To use the cumulative sum analysis score（CUSUM） to construct objectively the learning curve of phacoemulsification competency.METHODS： Three second-year residents and an experienced consultant were monitored for a series of 70 phacoemulsification cases each and had their series analysed by CUSUM regarding posterior capsule rupture（PCR） and best-corrected visual acuity. The acceptable rate for PCR was 〈5%（lower limit h） and the unacceptable rate was 〉10%（upper limit h）. The acceptable rate for bestcorrected visual acuity worse than 20/40 was 〈10%（lower limit h） and the unacceptable rate was 〉20%（upper limit h）. The area between lower limit h and upper limit h is called the decision interval. RESULTS： There was no statistically significant difference in the mean age, sex or cataract grades between groups. The first trainee achieved PCR CUSUM competency at his 22 nd case. His best-corrected visual acuity CUSUM was in the decision interval from his third case and stayed there until the end, never reaching competency. The second trainee achieved PCR CUSUM competency at his 39^ th case. He could reach best-corrected visual acuity CUSUM competency at his 22 ^nd case. The third trainee achieved PCR CUSUM competency at his 41 st case. He reached bestcorrected visual acuity CUSUM competency at his 14 ^th case.CONCLUSION： The learning curve of competency in phacoemulsification is constructed by CUSUM and in average took 38 cases for each trainee to achieve it.展开更多
In order to study the applicability of different light response models to the photoresponse curves of four species of Chamaenerion, four species of Chamaenerion collected from Serzilla were used as test materials. Fou...In order to study the applicability of different light response models to the photoresponse curves of four species of Chamaenerion, four species of Chamaenerion collected from Serzilla were used as test materials. Four common photosynthetic models were used to fit the photosynthetic response curve of the leaves. The results show that: 1) The effect of different photosynthetic response models on photosynthetic response curve of the genus chromasia was different. The fitted value of the correction model of right angled hyperbola was closest to the measured value, the R2 was 0.998, and RE was 0.216. 2) In terms of fitting the photosynthetic parameters, the initial quantum efficiency, light compensation point and dark respiration rate were suitable for fitting with non-right angle hyperbolic model. In terms of fitting the photosynthetic parameters, the initial quantum efficiency, light compensation point and dark respiration rate were suitable for fitting with non-right angle hyperbolic model. 3) The photosynthetic characteristics of C. angustifolium subsp. circumvagum reflect the negative response to high altitude radiation. Under strong radiation, the photosynthetic rate, apparent quantum efficiency, and light saturation point are low. On the other hand, C. conspersum has a positive response to high altitude radiation. C. angustifolium and C. latifolium has a higher light compensation point and higher light saturation point, but it is also positive for high altitude radiation. The response is only a choice of light intensity at different elevations, which also explains the distribution of C. angustifolium and C. latifolium in the salmonella with a single elevation, habitat, and slope.展开更多
This paper describes a new surgical techni-que for obtaining a better nasal contour in se-condary cleft lip nasal deformity. It involves re-moving of the curved septal cartilage and placinga piece of silica gel as a c...This paper describes a new surgical techni-que for obtaining a better nasal contour in se-condary cleft lip nasal deformity. It involves re-moving of the curved septal cartilage and placinga piece of silica gel as a columellar strut in themiddle so as to correct the oblique展开更多
The classification method of relative permeability curves is rarely reported, when relative permeability curves are applied;if the multiple relative permeability curves are normalized directly, but not classified, the...The classification method of relative permeability curves is rarely reported, when relative permeability curves are applied;if the multiple relative permeability curves are normalized directly, but not classified, the calculated result maybe cause a large error. For example, the relationship curve between oil displacement efficiency and water cut, which derived from the relative permeability curve in LD oilfield is uncertain in the shape of low water cut stage. If being directly normalized, the result of the interpretation of the water flooded zone is very high. In this study, two problems were solved: 1) The mathematical equation of the relationship between oil displacement efficiency and water cut was deduced, and repaired the lost data of oil displacement efficiency and water cut curve, which solve the problem of uncertain curve shape. After analysis, the reason why the curve is not available is that relative permeability curves are not classified and optimized;2) Two kinds of classification and evaluation methods of relative permeability curve were put forward, the direct evaluation method and the analogy method;it can get the typical relative permeability curve by identifying abnormal curve.展开更多
针对分布式电源和新型负荷容量累积造成负荷影响因素多元化和不确定性特性增强的问题,文中提出一种采用记忆神经网络和曲线形状修正的负荷预测方法。在负荷峰值预测中,采用最大信息系数计算负荷峰值与影响因素的非线性相关性,实现对输...针对分布式电源和新型负荷容量累积造成负荷影响因素多元化和不确定性特性增强的问题,文中提出一种采用记忆神经网络和曲线形状修正的负荷预测方法。在负荷峰值预测中,采用最大信息系数计算负荷峰值与影响因素的非线性相关性,实现对输入特征的筛选;综合考虑负荷峰值序列的长短期自相关性和输入特征与负荷峰值的不同程度相关性,结合Attention机制和双向长短时记忆(bidirectional long short-term memory,BiLSTM)神经网络建立负荷峰值预测模型。在负荷标幺曲线预测中,通过误差倒数法组合相似日和相邻日,建立负荷标幺曲线预测模型;针对预测偏差的非平稳特征,利用自适应噪声的完全集成经验模态分解和BiLSTM网络建立误差预测模型,对曲线形状进行修正。应用中国北方某城市的区域电网负荷数据为算例,验证了所提模型的有效性。展开更多
基金financially supported by National Natural Science Foundation of China(No.12064029)by Jiangxi Provincial Natural Science Foundation(No.20202BABL202024)by the Open project program of Key Laboratory of Opto-Electronic Information Science and Technology of Jiangxi Province(No.ED202208094)。
文摘Laser-induced breakdown spectroscopy(LIBS)has been used for soil analysis,but its measurement accuracy is often influenced by matrix effects of different kinds of soils.In this work,a method for matrix effect suppressing was developed using laser-induced plasma acoustic signals to correct the original spectrum,thereby improving the analysis accuracy of the soil elements.A good linear relationship was investigated firstly between the original spectral intensity and the acoustic signals.The relative standard deviations(RSDs)of Mg,Ca,Sr,and Ba elements were then calculated for both the original spectrum and the spectrum with the acoustic correction,and the RSDs were significantly reduced with the acoustic correction.Finally,calibration curves of MgⅠ285.213 nm,CaⅠ422.673 nm,SrⅠ460.733 nm and BaⅡ455.403 nm were established to assess the analytical performance of the proposed acoustic correction method.The values of the determination coefficient(R~2)of the calibration curves for Mg,Ca,Sr,and Ba elements,corrected by the acoustic amplitude,are improved from 0.9845,0.9588,0.6165,and 0.6490 to 0.9876,0.9677,0.8768,and 0.8209,respectively.The values of R~2 of the calibration curves corrected by the acoustic energy are further improved to 0.9917,0.9827,0.8835,and 0.8694,respectively.These results suggest that the matrix effect of LIBS on soils can be clearly improved by using acoustic correction,and acoustic energy correction works more efficiently than acoustic amplitude correction.This work provides a simple and efficient method for correcting matrix effects in the element analysis of soils by acoustic signals.
基金Supported by National Natural Science Foundation of China(Grant Nos.U1534209,51675446)Independent Subject of State Key Laboratory of Traction Power(Grant No.2019TPL-T13).
文摘ΔF-N curves are usually used to predict the fatigue life of spot welding in engineering,but they are time-consuming and laborious and not universal.For the purpose of predicting the fatigue life of spot welding accurately and efficiently,tensile-shear fatigue tests were conducted to obtain the fatigue life of spot-welded specimens with different sheet thicknesses combinations.These specimens were simulated by using the finite element method,and the structural stress was theoretically calculated.In the double logarithmic coordinate system,the structural stress-fatigue life(S-N)curve of spot welding was fitted by the least-squares method,based on the quasi-Newton method.The square of the correlation coefficient of the S-N curve was taken as the optimization objective,with the correction coefficients of force,bending moment,spot welding diameter,and sheet thickness as the variables.During the optimization process,three different ways were utilized to get three optimized spot welding S-N curves,which are suitable for different situations.The results show that the fitting effect of the S-N curve is improved,the data points are more compact,and the optimization effect is significant.These S-N curves can be used to predict the fatigue life,which provide the basis for practical engineering application.
文摘AIM： To use the cumulative sum analysis score（CUSUM） to construct objectively the learning curve of phacoemulsification competency.METHODS： Three second-year residents and an experienced consultant were monitored for a series of 70 phacoemulsification cases each and had their series analysed by CUSUM regarding posterior capsule rupture（PCR） and best-corrected visual acuity. The acceptable rate for PCR was 〈5%（lower limit h） and the unacceptable rate was 〉10%（upper limit h）. The acceptable rate for bestcorrected visual acuity worse than 20/40 was 〈10%（lower limit h） and the unacceptable rate was 〉20%（upper limit h）. The area between lower limit h and upper limit h is called the decision interval. RESULTS： There was no statistically significant difference in the mean age, sex or cataract grades between groups. The first trainee achieved PCR CUSUM competency at his 22 nd case. His best-corrected visual acuity CUSUM was in the decision interval from his third case and stayed there until the end, never reaching competency. The second trainee achieved PCR CUSUM competency at his 39^ th case. He could reach best-corrected visual acuity CUSUM competency at his 22 ^nd case. The third trainee achieved PCR CUSUM competency at his 41 st case. He reached bestcorrected visual acuity CUSUM competency at his 14 ^th case.CONCLUSION： The learning curve of competency in phacoemulsification is constructed by CUSUM and in average took 38 cases for each trainee to achieve it.
文摘In order to study the applicability of different light response models to the photoresponse curves of four species of Chamaenerion, four species of Chamaenerion collected from Serzilla were used as test materials. Four common photosynthetic models were used to fit the photosynthetic response curve of the leaves. The results show that: 1) The effect of different photosynthetic response models on photosynthetic response curve of the genus chromasia was different. The fitted value of the correction model of right angled hyperbola was closest to the measured value, the R2 was 0.998, and RE was 0.216. 2) In terms of fitting the photosynthetic parameters, the initial quantum efficiency, light compensation point and dark respiration rate were suitable for fitting with non-right angle hyperbolic model. In terms of fitting the photosynthetic parameters, the initial quantum efficiency, light compensation point and dark respiration rate were suitable for fitting with non-right angle hyperbolic model. 3) The photosynthetic characteristics of C. angustifolium subsp. circumvagum reflect the negative response to high altitude radiation. Under strong radiation, the photosynthetic rate, apparent quantum efficiency, and light saturation point are low. On the other hand, C. conspersum has a positive response to high altitude radiation. C. angustifolium and C. latifolium has a higher light compensation point and higher light saturation point, but it is also positive for high altitude radiation. The response is only a choice of light intensity at different elevations, which also explains the distribution of C. angustifolium and C. latifolium in the salmonella with a single elevation, habitat, and slope.
文摘This paper describes a new surgical techni-que for obtaining a better nasal contour in se-condary cleft lip nasal deformity. It involves re-moving of the curved septal cartilage and placinga piece of silica gel as a columellar strut in themiddle so as to correct the oblique
文摘The classification method of relative permeability curves is rarely reported, when relative permeability curves are applied;if the multiple relative permeability curves are normalized directly, but not classified, the calculated result maybe cause a large error. For example, the relationship curve between oil displacement efficiency and water cut, which derived from the relative permeability curve in LD oilfield is uncertain in the shape of low water cut stage. If being directly normalized, the result of the interpretation of the water flooded zone is very high. In this study, two problems were solved: 1) The mathematical equation of the relationship between oil displacement efficiency and water cut was deduced, and repaired the lost data of oil displacement efficiency and water cut curve, which solve the problem of uncertain curve shape. After analysis, the reason why the curve is not available is that relative permeability curves are not classified and optimized;2) Two kinds of classification and evaluation methods of relative permeability curve were put forward, the direct evaluation method and the analogy method;it can get the typical relative permeability curve by identifying abnormal curve.
文摘针对分布式电源和新型负荷容量累积造成负荷影响因素多元化和不确定性特性增强的问题,文中提出一种采用记忆神经网络和曲线形状修正的负荷预测方法。在负荷峰值预测中,采用最大信息系数计算负荷峰值与影响因素的非线性相关性,实现对输入特征的筛选;综合考虑负荷峰值序列的长短期自相关性和输入特征与负荷峰值的不同程度相关性,结合Attention机制和双向长短时记忆(bidirectional long short-term memory,BiLSTM)神经网络建立负荷峰值预测模型。在负荷标幺曲线预测中,通过误差倒数法组合相似日和相邻日,建立负荷标幺曲线预测模型;针对预测偏差的非平稳特征,利用自适应噪声的完全集成经验模态分解和BiLSTM网络建立误差预测模型,对曲线形状进行修正。应用中国北方某城市的区域电网负荷数据为算例,验证了所提模型的有效性。
