Control System in Missiles for Whole-Trajectory-Controlled Trajectory Correction Projectile Based on DSP

A control system for correction mechanisms through the whole trajectory is proposed based on the principle of one-dimensional trajectory correction projectile. Digital signal processing( DSP) is utilized as the core controller and gobal positioning system( GPS) is used to measure trajectory parameters to meet the requirements of calculating ballistics and system functions. Firstly,the hardware,mainly including communication module,ballistic calculation module,boosting& detonating module and data storage module,is designed. Secondly,the supporting software is developed based on the communication protocols of GPS and the workflow of control system. Finally,the feasibility and the reliability of the control system are verified through dynamic tests in a car and live firing experiments. The system lays a foundation for the research on trajectory correction projectile for the whole trajectory.

Key Techniques of Terminal Correction Mortar Projectiles

The operational principle, the impulse force and terminal guidance laws of terminal correction mortar projectiles（TCMP） are researched in this paper, by using the TCMP simulation program, key techniques such as the miss distance influenced by the acting point of impulse force, the impulse force value, the correction threshold, and the number of impulse rockets are researched in this paper. And the dual pulse control scheme is also studied. Simulation results indicate that the best acting point is near the center of gravity, sufficient correction resources are needed, the miss distance is insentive to the correction threshold, increasing the number of impulse rockets properly is beneficial to increase the hit precision, the velocity pursuit guidance law has less miss distance, the change of the attack angle is milder and the transient time becomes less in the dual impulse control scheme. These conclusions are important for choosing parameters and impulse correction schemes designed for TCMP.

Study on Overall Concept Planning of Terminal Correction Mortar Projectiles

The system composition, the operational principle of terminal correction mortar projectiles （TCMP） and the concept planning design of TCMP are researched in this paper. An overall design and aerodynamic configuration layout for TCMP are made in this paper, and its aerodynamic coefficients are calculated by using computational fluid dynamics （CFD） software. Test results of TCMP simulated ballistic projectiles indicate the designed TCMP can satisfy the interior ballistic demand and has a fine flight stability. The drag coefficients identified from the radar velocity-time data are in accord with the CFD computed results. According to the exposure frequency of the ground laser designator, a four-quadrant impulse correction scheme and a high exposure frequency impulse correction scheme are brought. The latter can calculate the target azimuth angle by counting the times of the facula passing through one quadrant. Simulation results also show that the guidance precision of the velocity pursuit is higher than that of the body pursuit, and the detector axis is less circuitous. Researches on the typical trajectory indicate that the terminal impulse correction can improve the hit precision of TCMP remarkably.