Momentum distribution and non-local high order correlation functions of 1D strongly interacting Bose gas

The Lieb-Liniger model is a prototypical integrable model and has been turned into the benchmark physics in theoretical and numerical investigations of low-dimensional quantum systems. In this note, we present various methods for calculating local and nonlocal M-particle correlation functions, momentum distribution, and static structure factor. In particular, using the Bethe ansatz wave function of the strong coupling Lieb-Liniger model, we analytically calculate the two-point correlation function, the large moment tail of the momentum distribution, and the static structure factor of the model in terms of the fractional statistical parameter a = 1 - 2/γ, where γ, is the dimensionless interaction strength. We also discuss the Tan＇s adiabatic relation and other universal relations for the strongly repulsive Lieb-Liniger model in terms of the fractional statistical parameter.

Dynamical correlation functions of the quadratic coupling spin-Boson model

The spin-boson model with quadratic coupling is studied using the bosonic numerical renormalization group method.We focus on the dynamical auto-correlation functions CO（ω）, with the operator taken as σx, σz, and X, respectively. In the weak-coupling regime α 〈 αc, these functions show power law ω-dependence in the small frequency limit, with the powers 1 ＋ 2s, 1 ＋ 2s, and s, respectively. At the critical point α = αc of the boson-unstable quantum phase transition, the critical exponents yO of these correlation functions are obtained as yσx= yσz= 1-2s and yX=-s, respectively. Here s is the bath index and X is the boson displacement operator. Close to the spin flip point, the high frequency peak of Cσx（ω） is broadened significantly and the line shape changes qualitatively, showing enhanced dephasing at the spin flip point.

Double differential cross sections for ionization of H by 75 keV proton impact:Assessing the role of correlated wave functions

The effect of final-state dynamic correlation is investigated for ionization of atomic hydrogen by 75-keV proton impact by analyzing double differential cross sections.The final state is represented by a continuum correlated wave(CCW-PT)function which accounts for the interaction between the projectile and the target nucleus(PT interaction).The correlated final state is nonseparable solutions of the wave equation combining the dynamics of the electron motion relative to the target and projectile,satisfying the Redmond’s asymptotic conditions corresponding to long range interactions.The transition matrix is evaluated using the CCW-PT function and the undistorted initial state.Both the correlation effects and the PT interaction are analyzed by the present calculations.The convergence of the continuous correlated final state is examined carefully.Our results are compared with the absolute experimental data measured by Laforge et al.[Phys.Rev.Lett.103,053201(2009)]and Schulz et al.[Phys.Rev.A 81,052705(2010)],as well as other theoretical models(especially the results of the latest non perturbation theory).We have shown that the dynamic correlation plays an important role in the ionization of atomic hydrogen by proton impact.While overall agreement between theory and the experimental data is encouraging,detailed agreement is still lacking.However,such an analysis is meaningful because it provides valuable information about the dynamical correlation and PT interaction in the CCW-PT theoretical model.

Algebraic equation of motion approach for solving the Anderson model

Based on the algebraic equation of motion(AEOM)approach,we have studied the single-impurity Anderson model by analytically solving the AEOM of the f-electron one-particle Green function in the Kondo limit.The related spectral function satisfies the sum rule and shows that there is a well-known three-peak structure at zero temperature.In the low energy limit,we obtain the analytical formula of the Kondo temperature that is the same as the exact solution in form except for a prefactor.We also show that the shape of the Kondo resonance is the Lorentzian form and the corresponding weight is proportional to the spin-flip correlation function.

分数维变换域滤波在图像恢复中的应用

The FOURIER transform is one of the most frequently used tools in signal analysis. A generalization of the Fourier transform-the fractional Fourier transform-has become a powerful tool for time-varying signal analysis. The mean square error(MSE) is used as design criteria to estimate signal. Wiener filter, which can be implement in O(NlogN) time, is suited for time-invariant degradation models. For time-variant and non-stationary processes, however, the linear estimate requires O(N 2 ). Filtering in fractional Fourier domains permits reduction of the error compared with ordinary Fourier domain filtering while requiring O(NlogN) implementation time. The blurred images that have several degradation models with different SNR are restored in the experiments. The results show that the method presented in this paper is valid and that the effect of restoration is improved as SNR is increased.

Ghost images reconstructed from fractional-order moments with thermal light

We present the joint probability density function(PDF) between the bucket signals and reference signals in thermal light ghost imaging, by regarding these signals as stochastic variables. The joint PDF allows us to examine the fractional-order moments of the bucket and the reference signals, in which the correlation orders are fractional numbers,other than positive integers in previous studies. The experimental results show that various images can be reconstructed from fractional-order moments. Negative(positive) ghost images are obtained with negative(positive) orders of the bucket signals. The visibility and peak signal-to-noise ratios of the diverse ghost images depend greatly on the fractional orders.

Weighted Multi-sensor Data Level Fusion Method of Vibration Signal Based on Correlation Function

As the differences of sensor＇s precision and some random factors are difficult to control,the actual measurement signals are far from the target signals that affect the reliability and precision of rotating machinery fault diagnosis.The traditional signal processing methods,such as classical inference and weighted averaging algorithm usually lack dynamic adaptability that is easy for trends to cause the faults to be misjudged or left out.To enhance the measuring veracity and precision of vibration signal in rotary machine multi-sensor vibration signal fault diagnosis,a novel data level fusion approach is presented on the basis of correlation function analysis to fast determine the weighted value of multi-sensor vibration signals.The approach doesn＇t require knowing the prior information about sensors,and the weighted value of sensors can be confirmed depending on the correlation measure of real-time data tested in the data level fusion process.It gives greater weighted value to the greater correlation measure of sensor signals,and vice versa.The approach can effectively suppress large errors and even can still fuse data in the case of sensor failures because it takes full advantage of sensor＇s own-information to determine the weighted value.Moreover,it has good performance of anti-jamming due to the correlation measures between noise and effective signals are usually small.Through the simulation of typical signal collected from multi-sensors,the comparative analysis of dynamic adaptability and fault tolerance between the proposed approach and traditional weighted averaging approach is taken.Finally,the rotor dynamics and integrated fault simulator is taken as an example to verify the feasibility and advantages of the proposed approach,it is shown that the multi-sensor data level fusion based on correlation function weighted approach is better than the traditional weighted average approach with respect to fusion precision and dynamic adaptability.Meantime,the approach is adaptable and easy to use,can be applied to other areas of vibration measurement.

Non-Markovian dynamics of a qubit in a reservoir: different solutions of non-Markovian master equation

We present a non-Markovian master equation for a qubit interacting with a general reservoir, which is derived according to the Nakajima-Zwanzig and the time convolutionless projection operator technique. The non-Markovian solutions and Markovian solution of dynamical decay of a qubit are compared. The results indicate the validity of non-Markovian approach in different coupling regimes and also show that the Markovian master equation may not precisely describe the dynamics of an open quantum system in some situation. The non-Markovian solutions may be effective for many qubits independently interacting with the heated reservoirs.

Signal processing method for shear wave velocity measurement

Soil shear wave velocity （SWV） is an important parameter in geotechnical engineering. To measure the soil SWV, three methods are generally used in China, including the single-hole method, cross-hole method and the surface-wave technique. An optimized approach based on a correlation function for single-hole SWV measurement is presented in this paper. In this approach, inherent inconsistencies of the artificial methods such as negative velocities, and too-large and too-small velocities, are eliminated from the single-hole method, and the efficiency of data processing is improved. In addition, verification using the cross-hole method of upper measuring points shows that the proposed optimized approach yields high precision in signal processing.

CSHINE for studies of HBT correlation in heavy ion reactions

The compact spectrometer for heavy ion experiment(CSHINE)is under construction for the study of isospin chronology via the Hanbury Brown–Twiss(HBT)particle correlation function and the nuclear equation of state of asymmetrical nuclear matter.The CSHINE consists of silicon strip detector(SSD)telescopes and large-area parallel-plate avalanche counters,which measure the light charged particles and fission fragments,respectively.In phase I,two SSD telescopes were used to observe 30 MeV/u 40Ar?197Au reactions.The results presented here demonstrate that hydrogen and helium were observed with high isotopic resolution,and the HBT correlation functions of light charged particles could be constructed from the obtained data.

MODAL PARAMETERS EXTRACTION WITH CROSS CORRELATION FUNCTION AND CROSS POWER SPECTRUM UNDER UNKNOWN EXCITATION

In most of real operational conditions only response data are measurable while the actual excitations are unknown, so modal parameter must be extracted only from responses. This paper gives a theoretical formulation for the cross correlation functions and cross power spectra between the outputs under the assumption of white noise excitation. It widens the field of modal analysis under ambient excitation because many classical methods by impulse response functions or frequency response functions can be used easily for modal analysis under unknown excitation. The Polyreference Complex Exponential method and Eigensystem Realization Algorithm using cross correlation functions in time domain and Orthogonal Polynomial method using cross power spectra in frequency domain are applied to a steel frame to extract modal parameters under operational conditions. The modal properties of the steel frame from these three methods are compared with those from frequency response functions analysis. The results show that the modal analysis method using cross correlation functions or cross power spectra presented in this paper can extract modal parameters efficiently under unknown excitation.

Temporal variation of noise correlation function(NCF) in Beijing and surroundings:Its relation with climate events and implications

Noise correlation function （NCF） was calculated using the data of the Beijing Capital-Area Telemetered Digital Seismograph Network from June 12 to September 12, 2005. Signal-to-noise ratio （SNR） is used to characterize the quality of NCF at each station pair. The SNR （in dB） is shown to be dependent on the separation distance R of the station pair via SNR= A -BlogR. ＇Normalized average SNR＇ for all the station pairs can then be calculated, as represented by the value of SNR taking R = 250 km in the empirical SNR-R relation, to measure the overall quality of the NCF result. The ＇normalized average SNR＇ of the NCF shows temporal variation and is apparently dependent on the root-mean-square （RMS） velocity of the microseism. The result obtained by this experiment provides clues to the explanation of the properties of NCF, such as the dominant mechanism underlying （diffuse wave fields or uncorrelated sources）, and the dependence of SNR on the time length of recordings.

Photon statistics of pulse-pumped four-wave mixing in fiber with weak signal injection

We study the photon statistics of pulse-pumped four-wave mixing in fibers with weak coherent signal injection by measuring the intensity correlation functions of individual signal and idler fields. The experimental results show that the intensity correlation function of individual signal（idler） field g_（s（i））^（2） decreases with the intensity of signal injection. After applying narrow band filter in signal（idler） band, the value of g_（s（i））^（2） decreases from 1.9 ± 0.02（1.9 ± 0.02） to 1.03 ± 0.02（1.05 ± 0.02） when the intensity of signal injection varies from 0 to 120 photons/pulse. The results indicate that the photon statistics changes from Bose–Einstein distribution to Poisson distribution. We calculate the intensity correlation functions by using the multi-mode theory of four-wave mixing in fibers. The theoretical curves well fit the experimental results.Our investigation will be useful for mitigating the crosstalk between quantum and classical channels in a dense wavelength division multiplexing network.

The abnormal lattice contraction of plutonium hydrides studied by first-principles calculations

Pu can be loaded with H forming complicated continuous solid solutions and compounds,and causing remarkable electronic and structural changes.Full potential linearized augmented plane wave methods combined with Hubbard parameter U and the spin-orbit effects are employed to investigate the electronic and structural properties of stoichiometric and non-stoichiometric face-centered cubic Pu hydrides（PuHx,x=2,2.25,2.5,2.75,3）.The decreasing trend with increasing x of the calculated lattice parameters is in reasonable agreement with the experimental findings.A comparative analysis of the electronic-structure results for a series of PuH x compositions reveals that the lattice contraction results from the associated effects of the enhanced chemical bonding and the size effects involving the interstitial atoms.We find that the size effects are the driving force for the abnormal lattice contraction.

Application test of matter element analysis in earthquake forecast

Calculation by means of the previous indices of the seismic activity can have the matter element analysis possess the forecast function. Readjusting repeatedly the grade limit value of every index can maximize the historical fitting ratio of the calculated and actual grade of the annual maximum magnitude, whose result is relatively ideal.

WRIST FORCE SENSOR'S DYNAMIC PERFORMANCE CALIBRATION BASED ON NEGATIVE STEP RESPONSE

Negative step response experimental method is used in wrist force sensor＇s dynamic performance calibration. The exciting manner of negative step response method is the same as wrist force sensor＇s load in working. This experimental method needn＇t special experiment equipments. Experiment＇s dynamic repeatability is good. So wrist force sensor＇s dynamic performance is suitable to be calibrated by negative step response method. A new correlation wavelet transfer method is studied. By wavelet transfer method, the signal is decomposed into two dimensional spaces of time-frequency. So the problem of negative step exciting energy concentrating in the low frequency band is solved. Correlation wavelet transfer doesn＇t require that wavelet primary function be orthogonal and needn＇t wavelet reconstruction. So analyzing efficiency is high. An experimental bench is designed and manufactured to load the wrist force sensor orthogonal excitation force/moment. A piezoelectric force sensor is used to setup soft trigger and calculate the value of negative step excitation. A wrist force sensor is calibrated. The pulse response function is calculated after negative step excitation and step response have been transformed to positive step excitation and step response. The pulse response function is transferred to frequency response function. The wrist force sensor＇s dynamic characteristics are identified by the frequency response function.

Application of Random Process in Soil Profile Modeling

When using the random process in soil profile modeling, the stationary and ergodicity of the soil properties in the profile must be tested. This paper describes a procedure for stationary and ergodicity testing. Numerical examples were given for demonstration. A log-cosine function is suggested to simulate the correlation function, which has been proved to be good for soil profile modeling.

Equilibrium dynamics of the sub-ohmic spin-boson model at finite temperature

We use the full-density matrix numerical renormalization group method to calculate the equilibrium dynamical correlation function C(ω) of the spin operator σ_(z) at finite temperature for the sub-ohmic spin-boson model.A peak is observed at the frequency ω_(T)~T in the curve of C(ω).The curve merges with the zero-temperature C(ω) in ω>>ω_(T) and deviates significantly from the zero-temperature curve in ω<<ω_(T).

Spin-correlation function of the fully frustrated Ising model and ±J Ising spin glass on a square lattice

In this work we study the correlation function of the ground state of a two-dimensional fully frustrated Ising model as well as spin glass. The Pfaffian method is used to calculate free energy and entropy as well as the correlation function. We estimate the exponent of spin correlation function for the fully frustrated model and spin glass. In this paper an overview of the latest results on the spin correlation function is presented.

Equilibrium dynamics of the sub-Ohmic spin-boson model under bias

Using the bosonic numerical renormalization group method, we studied the equilibrium dynamical correlation function C（ω） of the spin operator σz for the biased sub-Ohmic spin-boson model. The small-ω behavior C（ω） ∝ ω～s is found to be universal and independent of the bias ε and the coupling strength α（except at the quantum critical point α = αc and ε = 0）. Our NRG data also show C（ω） ∝ χ～2ω～s for a wide range of parameters, including the biased strong coupling regime（ε = 0 and α 〉 αc）, supporting the general validity of the Shiba relation. Close to the quantum critical point αc,the dependence of C（ω） on α and ε is understood in terms of the competition between ε and the crossover energy scale ω0^＊of the unbiased case. C（ω） is stable with respect to ε for ε《ε^＊. For ε 》ε^＊, it is suppressed by ε in the low frequency regime. We establish that ε^＊∝（ω0^＊）^1/θ holds for all sub-Ohmic regime 0≤s 〈 1, with θ = 2/（3s） for 0 〈 s≤1/2 and θ = 2/（1 ＋ s） for 1/2 〈 s 〈 1. The variation of C（ω） with α and ε is summarized into a crossover phase diagram on the α–ε plane.