China has been developed into one of the most active regions in terms of both fundamental and applied research on magnesium （Mg） and its alloys in the world from a solid base laid by its prominent metallurgist and m...China has been developed into one of the most active regions in terms of both fundamental and applied research on magnesium （Mg） and its alloys in the world from a solid base laid by its prominent metallurgist and materials scientists over the past decades. Nowadays, a large number of young-generation researchers have been inspired by their predecessors and become the key participants in the fields of Mg alloys, which consequently led to the establishment of China Youth Scholar Society for Magnesium Alloys Research in 2015. Since then, the first two China Youth Scholars Symposiums on Mg Alloys Research had been held at Harbin （2015） and Chongqing （2016） China, respectively. A number of crucial research inter- ests related to fundamental and applied Mg research were discussed at the conferences and summarized in this short perspective, aiming to boost far-reaching initiatives for development of new Mg-based materials to satisfy the requirements for a broad range of industrial employments. Herein, four main aspects are included as follows： i） Plastic deformation mechanism and strengthening strategy, ii） Design and development of new Mg-based materials, iii） Key service properties, and iv） New processing technologies.展开更多
In this article, the microstructure, hardness, and corrosion resistance of the Al0.3CrFe1.5MnNi0.5Tixand Al0.3CrFe1.5MnNi0.5Six（x = 0, 0.2, 0.5, 1.0） high-entropy alloys were investigated via X-ray diffraction（XRD...In this article, the microstructure, hardness, and corrosion resistance of the Al0.3CrFe1.5MnNi0.5Tixand Al0.3CrFe1.5MnNi0.5Six（x = 0, 0.2, 0.5, 1.0） high-entropy alloys were investigated via X-ray diffraction（XRD）scanning electron microscopy（SEM）, digital display Vickers hardness tester, and electrochemical technique These alloys are mainly composed of BCC solid-solution structure. When adding high content of Ti or Si elemen（x C 0.5）, some intermetallic compounds are found in the microstructure, which makes the alloys have a high hardness, high brittleness, and easy cracking. While the alloys with low content of Ti or Si（x = 0.2） have a hardness of HV 420–HV 430, and its hardness increases about 14 %compared with that of Al0.3CrFe1.5MnNi0.5. Electrochemical results in 3.5 % NaCl solution show that the alloying elements Ti and Si have a negative influence on the corrosion resistance of the Al0.3CrFe1.5MnNi0.5alloys.展开更多
基金support from Chinese Committee for Magnesium and its Application
文摘China has been developed into one of the most active regions in terms of both fundamental and applied research on magnesium （Mg） and its alloys in the world from a solid base laid by its prominent metallurgist and materials scientists over the past decades. Nowadays, a large number of young-generation researchers have been inspired by their predecessors and become the key participants in the fields of Mg alloys, which consequently led to the establishment of China Youth Scholar Society for Magnesium Alloys Research in 2015. Since then, the first two China Youth Scholars Symposiums on Mg Alloys Research had been held at Harbin （2015） and Chongqing （2016） China, respectively. A number of crucial research inter- ests related to fundamental and applied Mg research were discussed at the conferences and summarized in this short perspective, aiming to boost far-reaching initiatives for development of new Mg-based materials to satisfy the requirements for a broad range of industrial employments. Herein, four main aspects are included as follows： i） Plastic deformation mechanism and strengthening strategy, ii） Design and development of new Mg-based materials, iii） Key service properties, and iv） New processing technologies.
基金financially supported by the Post-doctoral Scientific Research Foundation of Zhengzhou UniversityPost-doctoral Scientific Research Foundation of China(No.2013M541986)
文摘In this article, the microstructure, hardness, and corrosion resistance of the Al0.3CrFe1.5MnNi0.5Tixand Al0.3CrFe1.5MnNi0.5Six（x = 0, 0.2, 0.5, 1.0） high-entropy alloys were investigated via X-ray diffraction（XRD）scanning electron microscopy（SEM）, digital display Vickers hardness tester, and electrochemical technique These alloys are mainly composed of BCC solid-solution structure. When adding high content of Ti or Si elemen（x C 0.5）, some intermetallic compounds are found in the microstructure, which makes the alloys have a high hardness, high brittleness, and easy cracking. While the alloys with low content of Ti or Si（x = 0.2） have a hardness of HV 420–HV 430, and its hardness increases about 14 %compared with that of Al0.3CrFe1.5MnNi0.5. Electrochemical results in 3.5 % NaCl solution show that the alloying elements Ti and Si have a negative influence on the corrosion resistance of the Al0.3CrFe1.5MnNi0.5alloys.
