Two kinds of Nd 1+ x Ba 2- x Cu 3O 7- δ , the sintered samples and zone melted samples, were treated in pure Ar at 950 ℃. The substitution of Nd ions for Ba ions in the Nd 1+ x Ba 2- ...Two kinds of Nd 1+ x Ba 2- x Cu 3O 7- δ , the sintered samples and zone melted samples, were treated in pure Ar at 950 ℃. The substitution of Nd ions for Ba ions in the Nd 1+ x Ba 2- x Cu 3O 7- δ before and after the heat treatment was investigated by XRD. In order to know the effects of heat treatment, the T c and J c of samples with and without the heat treatment in Ar were comparatively studied. The results show that the substitution of Nd for Ba decreases, whereas T c and J c increase after the treatment. The Nd 1+ x Ba 2- x Cu 3O 7- δ samples were oxygenated in pure oxygen at 300 ℃ . Based on the XRD spectra it was found that the samples with x <0.4 can transform from tetragonal phase into orthorhombic phase after the oxygenation, whereas in the sample with x >0.4 no phase transition occurs even after a long time oxygenation.展开更多
Since Cu-Al powder characteristics have important effects on the preparation of Cu/Al2O3 composite, the apparent activation energy of Al internal oxidation reaction in Cu-Al pre-alloyed powders with different characte...Since Cu-Al powder characteristics have important effects on the preparation of Cu/Al2O3 composite, the apparent activation energy of Al internal oxidation reaction in Cu-Al pre-alloyed powders with different characteristics was calculated in the present investigation. The microstructure and properties of the synthesized Cu/Al2O3 were studied. The results show that high-energy milling can obviously promote internal oxidation of Al in Cu-Al powders in the same solid solubility. At the same milling conditions and internal oxidation parameters, the solid solution of Al in Cu either in low or high amount will result in the poor microstructure and properties of the Cu/Al2O3 composite. Subsequently, when high-energy milling and internal oxidation are synchronously used to prepare the Cu/Al2O3 composite, there should be an appropriate solubility and milling effect for the pre-alloyed powders.展开更多
文摘Two kinds of Nd 1+ x Ba 2- x Cu 3O 7- δ , the sintered samples and zone melted samples, were treated in pure Ar at 950 ℃. The substitution of Nd ions for Ba ions in the Nd 1+ x Ba 2- x Cu 3O 7- δ before and after the heat treatment was investigated by XRD. In order to know the effects of heat treatment, the T c and J c of samples with and without the heat treatment in Ar were comparatively studied. The results show that the substitution of Nd for Ba decreases, whereas T c and J c increase after the treatment. The Nd 1+ x Ba 2- x Cu 3O 7- δ samples were oxygenated in pure oxygen at 300 ℃ . Based on the XRD spectra it was found that the samples with x <0.4 can transform from tetragonal phase into orthorhombic phase after the oxygenation, whereas in the sample with x >0.4 no phase transition occurs even after a long time oxygenation.
基金supported by the National Natural Science Foundation of China (No.50574075)Program for New Century Excellent Talents in University(No.NCET-05-0873)Specialized Research Fund for the Doctoral Program of Higher Education (SRFDP 20060700011)
文摘Since Cu-Al powder characteristics have important effects on the preparation of Cu/Al2O3 composite, the apparent activation energy of Al internal oxidation reaction in Cu-Al pre-alloyed powders with different characteristics was calculated in the present investigation. The microstructure and properties of the synthesized Cu/Al2O3 were studied. The results show that high-energy milling can obviously promote internal oxidation of Al in Cu-Al powders in the same solid solubility. At the same milling conditions and internal oxidation parameters, the solid solution of Al in Cu either in low or high amount will result in the poor microstructure and properties of the Cu/Al2O3 composite. Subsequently, when high-energy milling and internal oxidation are synchronously used to prepare the Cu/Al2O3 composite, there should be an appropriate solubility and milling effect for the pre-alloyed powders.
