The corrosion behavior of bulk metallic glasses(BMGs)(Fe41Co7Cr15Mo14C15B6Y2)100-xCrx(x=0,4,8,12,molar fraction,%)was investigated in1mol/L HCl aqueous solution with electrochemical tests.The electrochemical measureme...The corrosion behavior of bulk metallic glasses(BMGs)(Fe41Co7Cr15Mo14C15B6Y2)100-xCrx(x=0,4,8,12,molar fraction,%)was investigated in1mol/L HCl aqueous solution with electrochemical tests.The electrochemical measurements demonstrate that the passive current density of Fe-based amorphous alloy is reduced by about one order of magnitude,and meanwhile,the stability of passive film can be guaranteed by the Cr/Mo molar ratio.The Mott–Schottky(M–S)curves show that the passive film is the densest when the molar ratio of Cr/Mo is between1.37and1.69.X-ray photoelectron spectroscopy(XPS)analysis was performed to clarify chemical states of elements in the passive films.The results show that the corrosion resistance of the alloy is related to the molar ratio of Cr/Mo.The stability of passive film is determined by the synergistic action of Cr and Mo elements.The main component of the passive film is Cr3+oxide.When the potential is greater than0.5V(vs SCE),Mo6+ions play an important role in keeping the stability of the passive film.The appropriate molar ratio of Cr/Mo can reduce the dissolution rate of the passive film.展开更多
An InP optical 90°hybrid based on a×4 MMI coupler with a deep ridged waveguide is designed and fabricated.The working principle of the 90°hybrid is systematically introduced.Three-dimensional beam ropag...An InP optical 90°hybrid based on a×4 MMI coupler with a deep ridged waveguide is designed and fabricated.The working principle of the 90°hybrid is systematically introduced.Three-dimensional beam ropagation method(3D BPM)is used to optimize the structure parameters of the 90°hybrid.The designed compact structure is demonatrated to have a low excess loss less than-0.15 dB,a high common mode rejection ratio better than 40 dB,and a low relative phase deviation less than±2.5°.The designed hybrid is manufactured on a sandwitched structure deposited on an InP substrate.The measured results show that the common mode rejection ratios are larger than 20 dB in a range from 1520 nm to 1580 nm.The phase deviations are less than±5°in a range from 1545 nm to 1560 nm and less than±7°across the C band.The designed 90°optical hybrid is suitable well for realizing miniaturization,high-properties,and high bandwidth of coherent receiver.展开更多
An optical code generating device has been developed based on a 1×2 asymmetric plastic optical fiber （POF） coupler. The code generating device provides a unique series of output power which are successively use...An optical code generating device has been developed based on a 1×2 asymmetric plastic optical fiber （POF） coupler. The code generating device provides a unique series of output power which are successively used as an optical code in a portable optical access-card system. The device utilizing a tap-off ratio （TOFR） technique based on a simple variation of the tap width of an asymmetric Y-branch splitter, allows various ratios of optical power to be generated. The POF coupler has been fabricated using low cost acrylic material and computer numerical control （CNC） machining technique. The simulated and fabricated results show the same linear characteristics between the TOFR and the tap width. The fabricated device enables a variation of the TOFR from 10% up to 50% for a tap width of 500 um to 1 mm.展开更多
The scarcity of housing increases as population continues to rise all over the world. Despite government efforts at providing houses, yearly demand keeps on exceeding available houses and hence the hike in rent, the c...The scarcity of housing increases as population continues to rise all over the world. Despite government efforts at providing houses, yearly demand keeps on exceeding available houses and hence the hike in rent, the cost of erecting houses and the cost of building materials. This ultimately calls for a decisive solution. This study therefore applied compliance to cost ratio (C-CR) analysis in evaluating the optimum properties of fired ceramic bricks. The optimum mix proportions of waste glass (WG) and wood saw dust (WSD) in fired bricks, that will be suitable for housing constructions were hence determined. Fired clay brick samples which contained varied proportions of WG and WSD were examined for physical, mechanical and thermal properties in line with standard procedures. The results were compared with existing standards and property evaluation index, compliance level and C-CR were applied in analyzing the results obtained. It was observed that with increasing WG content, compliance level increased. Also, cost ratio and experimental cost of each brick sample trended upward. Sample with mix proportion;20 wt% WG, 5 wt% WSD and 75 wt% clay had compliance level of 94% and C-CR index of 7.81, hence chosen as optimum mix proportion for masonry bricks.展开更多
基金Project(51261021)supported by the National Natural Science Foundation of ChinaProject(KJLD13056)supported by the Science and Technology Landing Plan of Jiangxi Province,China
文摘The corrosion behavior of bulk metallic glasses(BMGs)(Fe41Co7Cr15Mo14C15B6Y2)100-xCrx(x=0,4,8,12,molar fraction,%)was investigated in1mol/L HCl aqueous solution with electrochemical tests.The electrochemical measurements demonstrate that the passive current density of Fe-based amorphous alloy is reduced by about one order of magnitude,and meanwhile,the stability of passive film can be guaranteed by the Cr/Mo molar ratio.The Mott–Schottky(M–S)curves show that the passive film is the densest when the molar ratio of Cr/Mo is between1.37and1.69.X-ray photoelectron spectroscopy(XPS)analysis was performed to clarify chemical states of elements in the passive films.The results show that the corrosion resistance of the alloy is related to the molar ratio of Cr/Mo.The stability of passive film is determined by the synergistic action of Cr and Mo elements.The main component of the passive film is Cr3+oxide.When the potential is greater than0.5V(vs SCE),Mo6+ions play an important role in keeping the stability of the passive film.The appropriate molar ratio of Cr/Mo can reduce the dissolution rate of the passive film.
基金Project supported by the National Key Research and Development Program of China(Grant No.2016YFB0402404)the Beijing Natural Science Foundation,China(Grant No.4194093)the National Natural Science Foundation of China(Grant Nos.61635010,61674136,and 61435002).
文摘An InP optical 90°hybrid based on a×4 MMI coupler with a deep ridged waveguide is designed and fabricated.The working principle of the 90°hybrid is systematically introduced.Three-dimensional beam ropagation method(3D BPM)is used to optimize the structure parameters of the 90°hybrid.The designed compact structure is demonatrated to have a low excess loss less than-0.15 dB,a high common mode rejection ratio better than 40 dB,and a low relative phase deviation less than±2.5°.The designed hybrid is manufactured on a sandwitched structure deposited on an InP substrate.The measured results show that the common mode rejection ratios are larger than 20 dB in a range from 1520 nm to 1580 nm.The phase deviations are less than±5°in a range from 1545 nm to 1560 nm and less than±7°across the C band.The designed 90°optical hybrid is suitable well for realizing miniaturization,high-properties,and high bandwidth of coherent receiver.
基金supported by the Malaysian E-Science Fund under Grant No 01-01-01-SF0197
文摘An optical code generating device has been developed based on a 1×2 asymmetric plastic optical fiber （POF） coupler. The code generating device provides a unique series of output power which are successively used as an optical code in a portable optical access-card system. The device utilizing a tap-off ratio （TOFR） technique based on a simple variation of the tap width of an asymmetric Y-branch splitter, allows various ratios of optical power to be generated. The POF coupler has been fabricated using low cost acrylic material and computer numerical control （CNC） machining technique. The simulated and fabricated results show the same linear characteristics between the TOFR and the tap width. The fabricated device enables a variation of the TOFR from 10% up to 50% for a tap width of 500 um to 1 mm.
文摘The scarcity of housing increases as population continues to rise all over the world. Despite government efforts at providing houses, yearly demand keeps on exceeding available houses and hence the hike in rent, the cost of erecting houses and the cost of building materials. This ultimately calls for a decisive solution. This study therefore applied compliance to cost ratio (C-CR) analysis in evaluating the optimum properties of fired ceramic bricks. The optimum mix proportions of waste glass (WG) and wood saw dust (WSD) in fired bricks, that will be suitable for housing constructions were hence determined. Fired clay brick samples which contained varied proportions of WG and WSD were examined for physical, mechanical and thermal properties in line with standard procedures. The results were compared with existing standards and property evaluation index, compliance level and C-CR were applied in analyzing the results obtained. It was observed that with increasing WG content, compliance level increased. Also, cost ratio and experimental cost of each brick sample trended upward. Sample with mix proportion;20 wt% WG, 5 wt% WSD and 75 wt% clay had compliance level of 94% and C-CR index of 7.81, hence chosen as optimum mix proportion for masonry bricks.
