The finite element method has been applied to simulate the dynamics of a water plugging string in a complex horizontal well of a low-permeability oilfield.The force associated with the pipe string and the packer has b...The finite element method has been applied to simulate the dynamics of a water plugging string in a complex horizontal well of a low-permeability oilfield.The force associated with the pipe string and the packer has been determined under the sucking action of the oil well pump.Such analysis has been conducted for a real drilling well,taking into account the process of lifting,lowering,unblocking and water plugging.Comparison between field measured data and simulation data indicates that the model is reliable and accurate.The packer creep effect under different pressure differences has also been investigated in the framework of the same model.展开更多
Based on a series of cyclic triaxial tests, the effect of cyclic frequency on the undrained behaviors of undisturbed marine clay is investigated. For a given dynamic stress ratio, the accumulated pore water pressure a...Based on a series of cyclic triaxial tests, the effect of cyclic frequency on the undrained behaviors of undisturbed marine clay is investigated. For a given dynamic stress ratio, the accumulated pore water pressure and dynamic strain increase with the number of cycles. There exists a threshold value for both the accumulated pore water pressure and dynamic strain, below which the effect of cyclic frequency is very small, but above which the accumulated pore water pressure and dynamic strain increase intensely with the decrease of cyclic frequency for a given number of cycles. The dynamic strength increases with the increase of cyclic frequency, whereas the effect of cyclic frequency on it gradually diminishes to zero when the number of cycles is large enough, and the dynamic strengths at different frequencies tend to the same limiting minimum dynamic strength. The test results demonstrate that the reasons for the frequency effect on the undrained soil behaviors are both the creep effect induced by the loading rate and the decrease of sample effective confining pressure caused by the accumulated pore water pressure.展开更多
In order to know about the rheological properties of rock in a long range of the time scale,method of increasing temperature was brought forward to accelerate the rheological process of rock,which could extend the tim...In order to know about the rheological properties of rock in a long range of the time scale,method of increasing temperature was brought forward to accelerate the rheological process of rock,which could extend the time scale of experimental test data.Firstly,based on the generalized linear viscoelastic constitutive equation with temperature variable,the creep behavior of rock was divided into three types according to the different strain dependences of the time,that is,Hookean deformation,Newtonian flow,and retarded elasticity.Then the general equivalence relationship between time parameter and temperature parameter was derived for each type of strain.Finally,the relation between time parameter and temperature parameter in the whole creep was considered and the general theory of time-temperature equivalence effect(TTEE) of rock was established.This research reveals: ①The temperature effect on the instantaneous strain could be modified through vertical shift.②The key point of the TTEE of Newtonian flow depends on whether in the study of linear viscoelastic behavior of rock change of temperature is completely equivalent to a shift of the logarithmic time scale or not.③By plotting the results of a creep experiment performed at different temperatures and comparing the curves obtained,one can decide whether the rock considered have TTEE.④The TTEE of the whole creep should satisfy that the horizontal shift function of Newtonian flow and retarded elasticity is consentaneous.展开更多
Creep feed grinding is a recently invented process of material handling. It combines high quality of the piece surface, productivity, and the possibility of automatic control. The main objectives of this research is t...Creep feed grinding is a recently invented process of material handling. It combines high quality of the piece surface, productivity, and the possibility of automatic control. The main objectives of this research is to study the influences of major process parameters and their interactions of creep feed grinding process such as wheel speed, workpiece speed, grinding depth, and dresser speed on the pin gauge dimensions of root of gas turbine blade by design of experiments (DOE). Experimental results are analyzed by analysis of variance (ANOVA) and empirical models of pin gauge dimensions of root are developed. The study found that higher wheel speed along with slower workpiece speed, lower grinding depth and higher dresser speed, cause to obtain best conditions for pin gauge dimensions of root.展开更多
Using age adjusted effective modulus(AAEM)method,creep of concrete filled steel tube(CFST)member was formulated considering of creep coefficient and aging coefficient.Ten CFST specimens were tested including eight for...Using age adjusted effective modulus(AAEM)method,creep of concrete filled steel tube(CFST)member was formulated considering of creep coefficient and aging coefficient.Ten CFST specimens were tested including eight for creep and two for shrinkage.The experimental result was compared with the computed result using AAEM in which the creep coefficient was taken from calibration of ACI model based on experimental result on sealed concrete,and aging coefficient was supplied from relaxation test on sealed concrete specimen.Furthermore,the creep of CFST member was analyzed using author's own subroutine to input concrete properties through user programmable feature(UPF)in ANSYS software.Comparison was made on authors' own experimental database,some existing experimental results,and results from AAEM and numerical analysis.Finally,the conditions of applicability of AAEM method are put forward,and numerical approach to compute creep of CFST specimen is delineated.展开更多
文摘The finite element method has been applied to simulate the dynamics of a water plugging string in a complex horizontal well of a low-permeability oilfield.The force associated with the pipe string and the packer has been determined under the sucking action of the oil well pump.Such analysis has been conducted for a real drilling well,taking into account the process of lifting,lowering,unblocking and water plugging.Comparison between field measured data and simulation data indicates that the model is reliable and accurate.The packer creep effect under different pressure differences has also been investigated in the framework of the same model.
文摘Based on a series of cyclic triaxial tests, the effect of cyclic frequency on the undrained behaviors of undisturbed marine clay is investigated. For a given dynamic stress ratio, the accumulated pore water pressure and dynamic strain increase with the number of cycles. There exists a threshold value for both the accumulated pore water pressure and dynamic strain, below which the effect of cyclic frequency is very small, but above which the accumulated pore water pressure and dynamic strain increase intensely with the decrease of cyclic frequency for a given number of cycles. The dynamic strength increases with the increase of cyclic frequency, whereas the effect of cyclic frequency on it gradually diminishes to zero when the number of cycles is large enough, and the dynamic strengths at different frequencies tend to the same limiting minimum dynamic strength. The test results demonstrate that the reasons for the frequency effect on the undrained soil behaviors are both the creep effect induced by the loading rate and the decrease of sample effective confining pressure caused by the accumulated pore water pressure.
基金Supported by the Long-term evolution of stability and permeability of high-level radioactive waste repository surrounding rock under THMC coupling process
文摘In order to know about the rheological properties of rock in a long range of the time scale,method of increasing temperature was brought forward to accelerate the rheological process of rock,which could extend the time scale of experimental test data.Firstly,based on the generalized linear viscoelastic constitutive equation with temperature variable,the creep behavior of rock was divided into three types according to the different strain dependences of the time,that is,Hookean deformation,Newtonian flow,and retarded elasticity.Then the general equivalence relationship between time parameter and temperature parameter was derived for each type of strain.Finally,the relation between time parameter and temperature parameter in the whole creep was considered and the general theory of time-temperature equivalence effect(TTEE) of rock was established.This research reveals: ①The temperature effect on the instantaneous strain could be modified through vertical shift.②The key point of the TTEE of Newtonian flow depends on whether in the study of linear viscoelastic behavior of rock change of temperature is completely equivalent to a shift of the logarithmic time scale or not.③By plotting the results of a creep experiment performed at different temperatures and comparing the curves obtained,one can decide whether the rock considered have TTEE.④The TTEE of the whole creep should satisfy that the horizontal shift function of Newtonian flow and retarded elasticity is consentaneous.
文摘Creep feed grinding is a recently invented process of material handling. It combines high quality of the piece surface, productivity, and the possibility of automatic control. The main objectives of this research is to study the influences of major process parameters and their interactions of creep feed grinding process such as wheel speed, workpiece speed, grinding depth, and dresser speed on the pin gauge dimensions of root of gas turbine blade by design of experiments (DOE). Experimental results are analyzed by analysis of variance (ANOVA) and empirical models of pin gauge dimensions of root are developed. The study found that higher wheel speed along with slower workpiece speed, lower grinding depth and higher dresser speed, cause to obtain best conditions for pin gauge dimensions of root.
文摘Using age adjusted effective modulus(AAEM)method,creep of concrete filled steel tube(CFST)member was formulated considering of creep coefficient and aging coefficient.Ten CFST specimens were tested including eight for creep and two for shrinkage.The experimental result was compared with the computed result using AAEM in which the creep coefficient was taken from calibration of ACI model based on experimental result on sealed concrete,and aging coefficient was supplied from relaxation test on sealed concrete specimen.Furthermore,the creep of CFST member was analyzed using author's own subroutine to input concrete properties through user programmable feature(UPF)in ANSYS software.Comparison was made on authors' own experimental database,some existing experimental results,and results from AAEM and numerical analysis.Finally,the conditions of applicability of AAEM method are put forward,and numerical approach to compute creep of CFST specimen is delineated.
