The appearance of macroscopic segregation in ZL205A alloy castings bears a super resemblance to theappearance of shrinkage porosity, and the chemical composition of the segregation is Al2Cu whose microstructure isin t...The appearance of macroscopic segregation in ZL205A alloy castings bears a super resemblance to theappearance of shrinkage porosity, and the chemical composition of the segregation is Al2Cu whose microstructure isin the form of dentrite or skeleton crystal. According to the characteristic of nebulous segregation, the formationprocess could be divided into two steps by the eutectic temperature of Al2Cu. Then a criterion for each of the twosteps is brought forward on the basis of the shrinkage porosity criterion of low pressure casting.展开更多
If a system is not disturbed （or invaded） by some law, there is no doubt that each system will move according to the expected law and keep stable. Although such a fact often appears, some unknown law breaks into the...If a system is not disturbed （or invaded） by some law, there is no doubt that each system will move according to the expected law and keep stable. Although such a fact often appears, some unknown law breaks into the system and leads it into turbulence. Using function one direction S-rough sets, this article gives the concept of the F-generation law in the system, the generation model of the F-generation law and the recognition method of the system law. Function one direction singular rough sets is a new theory and method in recognizing the disturbance law existing in the system and recognizing the system law.展开更多
The deformation and densification laws of preform upsetting and closed-die forging were researched based on experimental results of cold forging of deoxidized Fe powder sintering porous material under different initia...The deformation and densification laws of preform upsetting and closed-die forging were researched based on experimental results of cold forging of deoxidized Fe powder sintering porous material under different initial conditions such as friction factor, ratio between height and diameter and relative density. The fracture limit criteria＂ for powder cold-forging upsetting and the limit strain curve were achieved. The effect of friction facto,, ratlt, between height and diameter and relative density on fracture strain limitation was emphatically analyzed. The limit process parameter curves for the deformation of upsetting were also confirmed. Laws of deformation, densification and density distribution for closed-die forging of powder perform during cold-forging were further analyzed and discussed with the help of experimental phase analysis. As a result, this experiment established theoretical foundations for the design of preform and die as well as optimization of technological process parameters.展开更多
Using function one direction S-rough sets （function one direction singular rough sets）, f-law and F- law and the concept of law distance and the concept of system law collided by F-law are given. Using these concept...Using function one direction S-rough sets （function one direction singular rough sets）, f-law and F- law and the concept of law distance and the concept of system law collided by F-law are given. Using these concepts, state characteristic presented by system law collided by F-law and recognition of these states characteristic and recognition criterion and applications are given. Function one direction S-rough sets is one of basic forms of function S-rough sets （function singular rough sets）. Function one direction S-rough sets is importance theory and is a method in studying system law collision.展开更多
Using dual function one direction S-rough sets, this article gives the f-law, the F-law, law distance and the concept of system law collided by the F-law. The characteristics presented by the system law collided by th...Using dual function one direction S-rough sets, this article gives the f-law, the F-law, law distance and the concept of system law collided by the F-law. The characteristics presented by the system law collided by the F-law, the recognition of these characteristics and recognition criterion are also proposed. The dual function one direction S-rough sets is one of the basic forms of function S-rough sets. Its basic theory and application in the study of system law collision are reviewed.展开更多
文摘The appearance of macroscopic segregation in ZL205A alloy castings bears a super resemblance to theappearance of shrinkage porosity, and the chemical composition of the segregation is Al2Cu whose microstructure isin the form of dentrite or skeleton crystal. According to the characteristic of nebulous segregation, the formationprocess could be divided into two steps by the eutectic temperature of Al2Cu. Then a criterion for each of the twosteps is brought forward on the basis of the shrinkage porosity criterion of low pressure casting.
基金This project was supported by the Ministry of Education of China (206089)Shangdong Provincial Natural Science Foundation of China (Y2004A04)Fujian Provincial Natural Science Foundation of China (Z051049).
文摘If a system is not disturbed （or invaded） by some law, there is no doubt that each system will move according to the expected law and keep stable. Although such a fact often appears, some unknown law breaks into the system and leads it into turbulence. Using function one direction S-rough sets, this article gives the concept of the F-generation law in the system, the generation model of the F-generation law and the recognition method of the system law. Function one direction singular rough sets is a new theory and method in recognizing the disturbance law existing in the system and recognizing the system law.
基金Supported by the National Natural Science Foundation of China (No.50175086)
文摘The deformation and densification laws of preform upsetting and closed-die forging were researched based on experimental results of cold forging of deoxidized Fe powder sintering porous material under different initial conditions such as friction factor, ratio between height and diameter and relative density. The fracture limit criteria＂ for powder cold-forging upsetting and the limit strain curve were achieved. The effect of friction facto,, ratlt, between height and diameter and relative density on fracture strain limitation was emphatically analyzed. The limit process parameter curves for the deformation of upsetting were also confirmed. Laws of deformation, densification and density distribution for closed-die forging of powder perform during cold-forging were further analyzed and discussed with the help of experimental phase analysis. As a result, this experiment established theoretical foundations for the design of preform and die as well as optimization of technological process parameters.
基金the Natural Science Foundation of Shandong Province of China (Y2004A04)the Natural Science Foundation of Fujian Province of China (Z0511049).
文摘Using function one direction S-rough sets （function one direction singular rough sets）, f-law and F- law and the concept of law distance and the concept of system law collided by F-law are given. Using these concepts, state characteristic presented by system law collided by F-law and recognition of these states characteristic and recognition criterion and applications are given. Function one direction S-rough sets is one of basic forms of function S-rough sets （function singular rough sets）. Function one direction S-rough sets is importance theory and is a method in studying system law collision.
基金Natural Science Foundation of Shandong Province of China (Y2004A04)Education Hall Foundation of Fujian Education Official of China(JA04268).
文摘Using dual function one direction S-rough sets, this article gives the f-law, the F-law, law distance and the concept of system law collided by the F-law. The characteristics presented by the system law collided by the F-law, the recognition of these characteristics and recognition criterion are also proposed. The dual function one direction S-rough sets is one of the basic forms of function S-rough sets. Its basic theory and application in the study of system law collision are reviewed.
