面向Critical MTC的无连接传输

关键机器类通信(Critical MTC)对时延和可靠性都有极高的要求。支持海量Critical MTC的终端是一个巨大挑战。提出了一种面向海量Critical MTC终端的无连接传输方案。为了降低时延,提出了基于竞争的无连接单次传输方案;为了实现高可靠性,设计了具有极低导频碰撞概率的稀疏正交多导频。进一步利用大规模多输入多输出(MIMO)的增益来提高可靠性以及在空域复用大量用户。仿真结果表明,提出的方案可以支持海量Critical MTC终端,同时满足低时延和高可靠的严格要求。

Numerical analysis of high‑speed railway slab tracks using calibrated and validated 3D time‑domain modelling

Concrete slabs are widely used in modern railways to increase the inherent resilient quality of the tracks,provide safe and smooth rides,and reduce the maintenance frequency.In this paper,the elastic performance of a novel slab trackform for high-speed railways is investigated using three-dimensional finite element modelling in Abaqus.It is then compared to the performance of a ballasted track.First,slab and ballasted track models are developed to replicate the full-scale testing of track sections.Once the models are calibrated with the experimental results,the novel slab model is developed and compared against the calibrated slab track results.The slab and ballasted track models are then extended to create linear dynamic models,considering the track geodynamics,and simulating train passages at various speeds,for which the Ledsgard documented case was used to validate the models.Trains travelling at low and high speeds are analysed to investigate the track deflections and the wave propagation in the soil,considering the issues associated with critical speeds.Various train loading methods are discussed,and the most practical approach is retained and described.Moreover,correlations are made between the geotechnical parameters of modern high-speed rail and conventional standards.It is found that considering the same ground condition,the slab track deflections are considerably smaller than those of the ballasted track at high speeds,while they show similar behaviour at low speeds.

Mental health status among COVID-19 patients survivors of critical illness in Saudi Arabia:A 6-month follow-up questionnaire study

BACKGROUND Psychological assessment after intensive care unit(ICU)discharge is increasingly used to assess patients'cognitive and psychological well-being.However,few studies have examined those who recovered from coronavirus disease 2019(COVID-19).There is a paucity of data from the Middle East assessing the post-ICU discharge mental health status of patients who had COVID-19.AIM To evaluate anxiety and depression among patients who had severe COVID-19.METHODS This is a prospective single-center follow-up questionnaire-based study of adults who were admitted to the ICU or under ICU consultation for>24 h for COVID-19.Eligible patients were contacted via telephone.The patient’s anxiety and depression six months after ICU discharge were assessed using the Hospital Anxiety and Depression Scale(HADS).The primary outcome was the mean HADS score.The secondary outcomes were risk factors of anxiety and/or depression.RESULTS Patients who were admitted to the ICU because of COVID-19 were screened(n=518).Of these,48 completed the questionnaires.The mean age was 56.3±17.2 years.Thirty patients(62.5%)were male.The main comorbidities were endocrine(n=24,50%)and cardiovascular(n=21,43.8%)diseases.The mean overall HADS score for anxiety and depression at 6 months post-ICU discharge was 11.4(SD±8.5).A HADS score of>7 for anxiety and depression was detected in 15 patients(30%)and 18 patients(36%),respectively.Results from the multivariable ordered logistic regression demonstrated that vasopressor use was associated with the development of anxiety and depression[odds ratio(OR)39.06,95% confidence interval:1.309-1165.8;P<0.05].CONCLUSION Six months after ICU discharge,30% of patients who had COVID-19 demonstrated a HADS score that confirmed anxiety and depression.To compare the psychological status of patients following an ICU admission(with vs without COVID-19),further studies are warranted.

Semi-analytical solution for drained expansion analysis of a hollow cylinder of critical state soils

The expansion of a thick-walled hollow cylinder in soil is of non-self-similar nature that the stress/deformation paths are not the same for different soil material points.As a result,this problem cannot be solved by the common self-similar-based similarity techniques.This paper proposes a novel,exact solution for rigorous drained expansion analysis of a hollow cylinder of critical state soils.Considering stress-dependent elastic moduli of soils,new analytical stress and displacement solutions for the nonself-similar problem are developed taking the small strain assumption in the elastic zone.In the plastic zone,the cavity expansion response is formulated into a set of first-order partial differential equations(PDEs)with the combination use of Eulerian and Lagrangian descriptions,and a novel solution algorithm is developed to efficiently solve this complex boundary value problem.The solution is presented in a general form and thus can be useful for a wide range of soils.With the new solution,the non-self-similar nature induced by the finite outer boundary is clearly demonstrated and highlighted,which is found to be greatly different to the behaviour of cavity expansion in infinite soil mass.The present solution may serve as a benchmark for verifying the performance of advanced numerical techniques with critical state soil models and be used to capture the finite boundary effect for pressuremeter tests in small-sized calibration chambers.

Microstructure Transformation and Refinement Mechanism of Undercooled Cu-Ni-Co Alloy Based on Simulation of Critical Cutting Speed in Ultrasonic Machining

Both Cu60Ni38Co2 and Cu60Ni40 alloy were naturally cooled after rapid solidification from the liquid phase.The transformation law of the microstructure characteristics of the rapidly solidified alloy with the change of undercooling(ΔT)was systematically studied.It is found that the two alloys experience the same transformation process.The refinement structures under different undercoolings were characterized by electron backscatter diffraction(EBSD).The results show that the characteristics of the refinement structure of the two alloys with low undercooling are the same,but the characteristics of the refinement structure with high undercooling are opposite.The transmission electron microscopy(TEM)results of Cu60Ni38Co2 alloy show that the dislocation network density of low undercooled microstructure is lower than that of high undercooled microstructure.By combining EBSD and TEM,it could be confirmed that the dendrite remelting fracture is the reason for the refinement of the low undercooled structure,while the high undercooled structure is refined due to recrystallization.On this basis,in the processing of copper base alloys,there will be serious work hardening phenomenon and machining hard problem of consciousness problems caused by excessive cutting force.A twodimensional orthogonal turning finite element model was established using ABAQUS software to analyze the changes in cutting speed and tool trajectory in copper based alloy ultrasonic elliptical vibration turning.The results show that in copper based alloy ultrasonic elliptical vibration turning,cutting process parameters have a significant impact on cutting force.Choosing reasonable process parameters can effectively reduce cutting force and improve machining quality.

Enhancing Critical Path Problem in Neutrosophic Environment Using Python

In the real world,one of the most common problems in project management is the unpredictability of resources and timelines.An efficient way to resolve uncertainty problems and overcome such obstacles is through an extended fuzzy approach,often known as neutrosophic logic.Our rigorous proposed model has led to the creation of an advanced technique for computing the triangular single-valued neutrosophic number.This innovative approach evaluates the inherent uncertainty in project durations of the planning phase,which enhances the potential significance of the decision-making process in the project.Our proposed method,for the first time in the neutrosophic set literature,not only solves existing problems but also introduces a new set of problems not yet explored in previous research.A comparative study using Python programming was conducted to examine the effectiveness of responsive and adaptive planning,as well as their differences from other existing models such as the classical critical path problem and the fuzzy critical path problem.The study highlights the use of neutrosophic logic in handling complex projects by illustrating an innovative dynamic programming framework that is robust and flexible,according to the derived results,and sets the stage for future discussions on its scalability and application across different industries.

Attack-Resilient Distributed Cooperative Control of Virtually Coupled High-Speed Trains via Topology Reconfiguration

Dear Editor,This letter addresses the resilient distributed cooperative control problem of a virtually coupled train convoy under stochastic disturbances and cyber attacks.The main purpose is to achieve distributed coordination of virtually coupled high-speed trains with the prescribed inter-train distance and same cruise velocity.

Predicted Critical State Based on Invariance of the Lyapunov Exponent in Dual Spaces

Critical states in disordered systems,fascinating and subtle eigenstates,have attracted a lot of research interests.However,the nature of critical states is difficult to describe quantitatively,and in general,it cannot predict a system that hosts the critical state.We propose an explicit criterion whereby the Lyapunov exponent of the critical state should be 0 simultaneously in dual spaces,namely the Lyapunov exponent remains invariant under the Fourier transform.With this criterion,we can exactly predict a one-dimensional quasiperiodic model which is not of self-duality,but hosts a large number of critical states.Then,we perform numerical verification of the theoretical prediction and display the self-similarity of the critical state.Due to computational complexity,calculations are not performed for higher dimensional models.However,since the description of extended and localized states by the Lyapunov exponent is universal and dimensionless,utilizing the Lyapunov exponent of dual spaces to describe critical states should also be universal.Finally,we conjecture that some kind of connection exists between the invariance of the Lyapunov exponent and conformal invariance,which can promote the research of critical phenomena.

Anisotropic s-Wave Gap in the Vicinity of a Quantum Critical Point in Superconducting BaFe_(2)(As_(1-x)P_(x))_(2) Single Crystals:A Study of Point-Contact Spectroscopy

We report on soft c-axis point-contact Andreev reflection(PCAR)spectroscopy combining with resistivity measurements on BaFe_(2)(As_(0.7)P_(0.3))_(2),to elucidate the superconducting gap structure in the vicinity of the quantum critical point.A double peak at the gap edge plus a dip feature at zero-bias has been observed on the PCAR spectra,indicative of the presence of a nodeless gap in BaFe_(2)(As_(0.7)P_(0.3))_(2).Detailed analysis within a sophisticated theoretical model reveals an anisotropic gap with deep gap minima.The PCARs also feature additional structures related to the electron-bosonic coupling mode.Using the extracted superconducting energy gap value,a characteristic bosonic energy Ω_(b) and its temperature dependence are obtained,comparable with the spin-resonance energy observed in neutron scattering experiment.These results indicate a magnetism-driven quantum critical point in the BaFe_(2)(As_(1-x)P_(x))_(2) system.

Engineering Quantum Criticality for Quantum Dot Power Harvesting

Coupling of quantum-dot circuits to microwave photons enables us to investigate photon-assisted quantum transport.Here,we revisit this typical circuit quantum electrodynamical setup by introducing the Kerr nonlinearity of photons.By exploiting quantum critical behavior,we propose a powerful scheme to control the power-harvesting efficiency in the microwave regime,where the driven-dissipative optical system acts as an energy pump.It drives electron transport against a load in the quantum-dot circuit.The energy transfer and,consequently,the harvesting efficiency are enhanced near the critical point.As the critical point moves towards to low input power,high efficiency within experimental parameters is achieved.Our results complement fundamental studies of photon-to-electron conversion at the nanoscale and provide practical guidance for designs of integrated photoelectric devices through quantum criticality.

Unlocking hypoglycemia–associated brain microvascular dysfunction:critical insights from proteomic analysis

Hypoglycemia-a critical complication linked to worsened brain function in diabetic subjects:Hypoglycemia is characterized by a decline in circulatory glucose levels below sta nda rd physiological thresholds.Mild hypoglycemia,classified as level 1 hypoglycemia,is defined by blood glucose levels below 70 mg/dL and can be effectively addressed through carbohydrate intake.Severe hypoglycemia,denoted by blood glucose levels less than 54 mg/dL,poses a life-threatening risk if left untreated.Individuals with type 1 and type 2 diabetes undergoing insulin treatment are particularly susceptible to hypoglycemia due to impaired counterregulatory mechanisms.

Characterization of bright betatron radiation generated by direct laser acceleration of electrons in plasma of near critical density

Directed x-rays produced in the interaction of sub-picosecond laser pulses of moderate relativistic intensity with plasma of near-critical density are investigated. Synchrotron-like (betatron) radiation occurs in the process of direct laser acceleration (DLA) of electrons in a relativisticlaser channel when the electrons undergo transverse betatron oscillations in self-generated quasi-static electric and magnetic fields. In anexperiment at the PHELIX laser system, high-current directed beams of DLA electrons with a mean energy ten times higher than the ponderomotive potential and maximum energy up to 100 MeV were measured at 10^(19) W/cm^(2)laser intensity. The spectrum of directed x-raysin the range of 5–60 keV was evaluated using two sets of Ross filters placed at 0°and 10°to the laser pulse propagation axis. The differential x-ray absorption method allowed for absolute measurements of the angular-dependent photon fluence. We report 10^(13) photons/sr withenergies >5 keV measured at 0°to the laser axis and a brilliance of 10^(21) photons s^(−1) mm^(−2) mrad−2(0.1%BW)−1. The angular distributionof the emission has an FWHM of 14°–16°. Thanks to the ultra-high photon fluence, point-like radiation source, and ultra-short emissiontime, DLA-based keV backlighters are promising for various applications in high-energy-density research with kilojoule petawatt-class laserfacilities.

21st century critical care medicine:An overview

Critical care medicine in the 21st century has witnessed remarkable advancements that have significantly improved patient outcomes in intensive care units(ICUs).This abstract provides a concise summary of the latest developments in critical care,highlighting key areas of innovation.Recent advancements in critical care include Precision Medicine:Tailoring treatments based on individual patient characteristics,genomics,and biomarkers to enhance the effectiveness of therapies.The objective is to describe the recent advancements in Critical Care Medicine.Telemedicine:The integration of telehealth technologies for remote patient monitoring and consultation,facilitating timely interventions.Artificial intelligence(AI):AI-driven tools for early disease detection,predictive analytics,and treatment optimization,enhancing clinical decision-making.Organ Support:Advanced life support systems,such as Extracorporeal Membrane Oxygenation and Continuous Renal Replacement Therapy provide better organ support.Infection Control:Innovative infection control measures to combat emerging pathogens and reduce healthcare-associated infections.Ventilation Strategies:Precision ventilation modes and lung-protective strategies to minimize ventilatorinduced lung injury.Sepsis Management:Early recognition and aggressive management of sepsis with tailored interventions.Patient-Centered Care:A shift towards patient-centered care focusing on psychological and emotional wellbeing in addition to medical needs.We conducted a thorough literature search on PubMed,EMBASE,and Scopus using our tailored strategy,incorporating keywords such as critical care,telemedicine,and sepsis management.A total of 125 articles meeting our criteria were included for qualitative synthesis.To ensure reliability,we focused only on articles published in the English language within the last two decades,excluding animal studies,in vitro/molecular studies,and non-original data like editorials,letters,protocols,and conference abstracts.These advancements reflect a dynamic landscape in critical care medicine,where technology,research,and patient-centered approaches converge to improve the quality of care and save lives in ICUs.The future of critical care promises even more innovative solutions to meet the evolving challenges of modern medicine.

Exploring Critical Thinking Dispositions among Fourth Year BSc Nursing Students of Various Colleges of Nursing, Pakistan

Background: Critical Thinking (CT) dispositions in nursing are prominent predictors of competence in delivering high-quality care, and of professionalism, in newly graduated nurses. CT skills, in isolation of CT dispositions, do not guarantee success in the workplace, because Critical Thinking Dispositions (CTD) are important elements of intellectual reasoning that simulate a person towards using the CT skills. Therefore, nursing educational programs should promote lifelong learning rather than focusing on transferring the content of nursing knowledge only. And for this purpose, quality education is the key. Education should focus on teaching from diverse perspectives, incorporating various teaching learning strategies that are congruent with the modern era. Purpose: The purpose of this study is to explore critical thinking dispositions among final year Baccalaureate Nursing students of various military colleges of nursing, in Pakistan. Methodology: A descriptive qualitative exploratory study design was used to investigate the CTD of BSc final year nursing students. The study population included twelve willing nursing students, from six military colleges across the country. Demographic information and consent was taken from the participants of the study. In-depth interviews, through a semi structured interview guide, and probes were used to obtain data related to personal experiences of CTD amongst the nursing students. Results: Data analysis showed two broad themes: 1) Perceptions of CT, and 2) Experiences of CT dispositions. In theme one, the emerging category was: Clarity of CT;whereas in theme two, the categories that emerged were: a) Truth Seeking, b) Open Mindedness, c) Inquisitiveness, and d) Self Organization. Conclusion: The findings of the study revealed positive dispositions towards truth seeking, open mindedness, and self-organization, whereas disposition towards inquisitiveness was weak. Self-confidence and maturity also emerged as positive factors that the students possessed. This study recommends that faculty and learners should extend their concept of CTD, and emphasizes its application in daily routine. Additionally, faculty should modify their instructional strategies and focus on the cultivation of dispositions of inquisitiveness, curiosity, and allow questioning by students in the class.

Speed limit effect during lane change in a two-lane lattice model under V2X environment

Speed limit measures are ubiquitous due to the complexity of the road environment,which can be supplied with the help of vehicle to everything(V2X)communication technology.Therefore,the influence of speed limit on traffic system will be investigated to construct a two-lane lattice model accounting for the speed limit effect during the lane change process under V2X environment.Accordingly,the stability condition and the mKdV equation are closely associated with the speed limit effect through theory analysis.Moreover,the evolution of density and hysteresis loop is simulated to demonstrate the positive role of the speed limit effect on traffic stability in the cases of strong reaction intensity and high limited speed.

Effect of speed humps on instantaneous traffic emissions in a microscopic model with limited deceleration capacity

As a common transportation facility, speed humps can control the speed of vehicles on special road sections to reduce traffic risks. At the same time, they also cause instantaneous traffic emissions. Based on the classic instantaneous traffic emission model and the limited deceleration capacity microscopic traffic flow model with slow-to-start rules, this paper has investigated the impact of speed humps on traffic flow and the instantaneous emissions of vehicle pollutants in a single lane situation. The numerical simulation results have shown that speed humps have significant effects on traffic flow and traffic emissions. In a free-flow region, the increase of speed humps leads to the continuous rise of CO_(2), NO_(X) and PM emissions. Within some density ranges, one finds that these pollutant emissions can evolve into some higher values under some random seeds. Under other random seeds, they can evolve into some lower values. In a wide moving jam region, the emission values of these pollutants sometimes appear as continuous or intermittent phenomenon. Compared to the refined Na Sch model, the present model has lower instantaneous emissions such as CO_(2), NO_(X) and PM and higher volatile organic components(VOC) emissions. Compared to the limited deceleration capacity model without slow-to-start rules, the present model also has lower instantaneous emissions such as CO_(2), NO_(X) and PM and higher VOC emissions in a wide moving jam region. These results can also be confirmed or explained by the statistical values of vehicle velocity and acceleration.

BILL Strategy:Points to Consider During the Performance and Interpretation of Critical Care Echocardiography

The growing utilization of critical care echocardiography(CCE) by clinicians necessitates a meticulous review of clinical conditions in critically ill patients, both before and during the examination. The reviewing process of clinical conditions minimizes the risk of overlooking or misinterpreting crucial findings. This article proposes a comprehensive strategy, namely BILL strategy, to integrate into the CCE protocol, where "B" represents baseline respiratory and hemodynamic support, "I" signifies information gleaned from invasive monitoring, including central venous pressure and thermodilution-derived cardiac output, the first "L" denotes laboratory results such as central venous oxygen saturation, troponin, and brain natriuretic peptide, and the second "L" refers to lung ultrasound data. Combining the BILL strategy with CCE can enhance comprehensive understanding of critical conditions, potentially leading to improved diagnostic accuracy and patient outcomes.

Complementary-Label Adversarial Domain Adaptation Fault Diagnosis Network under Time-Varying Rotational Speed and Weakly-Supervised Conditions

Recent research in cross-domain intelligence fault diagnosis of machinery still has some problems,such as relatively ideal speed conditions and sample conditions.In engineering practice,the rotational speed of the machine is often transient and time-varying,which makes the sample annotation increasingly expensive.Meanwhile,the number of samples collected from different health states is often unbalanced.To deal with the above challenges,a complementary-label(CL)adversarial domain adaptation fault diagnosis network(CLADAN)is proposed under time-varying rotational speed and weakly-supervised conditions.In the weakly supervised learning condition,machine prior information is used for sample annotation via cost-friendly complementary label learning.A diagnosticmodel learning strategywith discretized category probabilities is designed to avoidmulti-peak distribution of prediction results.In adversarial training process,we developed virtual adversarial regularization(VAR)strategy,which further enhances the robustness of the model by adding adversarial perturbations in the target domain.Comparative experiments on two case studies validated the superior performance of the proposed method.

A novel framework to intercept GPS-denied,bomb-carrying,nonmilitary,kamikaze drones:Towards protecting critical infrastructures

Protection of urban critical infrastructures(CIs)from GPS-denied,bomb-carrying kamikaze drones(G-BKDs)is very challenging.Previous approaches based on drone jamming,spoofing,communication interruption and hijacking cannot be applied in the case under examination,since G-B-KDs are uncontrolled.On the other hand,drone capturing schemes and electromagnetic pulse(EMP)weapons seem to be effective.However,again,existing approaches present various limitations,while most of them do not examine the case of G-B-KDs.This paper,focuses on the aforementioned under-researched field,where the G-B-KD is confronted by two defensive drones.The first neutralizes and captures the kamikaze drone,while the second captures the bomb.Both defensive drones are equipped with a net-gun and an innovative algorithm,which,among others,estimates the locations of interception,using a real-world trajectory model.Additionally,one of the defensive drones is also equipped with an EMP weapon to damage the electronics equipment of the kamikaze drone and reduce the capturing time and the overall risk.Extensive simulated experiments and comparisons to state-of-art methods,reveal the advantages and limitations of the proposed approach.More specifically,compared to state-of-art,the proposed approach improves:(a)time to neutralize the target by at least 6.89%,(b)maximum number of missions by at least 1.27%and(c)total cost by at least 5.15%.

Connection-Free Transmission for Critical MTC

In this paper,a contention-based connection-free transmission scheme is proposed to meet the stringent requirements of ultra-reliability and low-latency for critical machine-type communication(cMTC).To improve reliability,we design multiple independent sparse orthogonal pilots(MISOP)to significantly reduce the probability of pilot collision to the order of 10^(−5).Besides,the advancements of massive MIMO(mMIMO)are exploited to further enhance the reliability.To achieve low latency,connection-free slot-based one-shot transmission without retransmissions is adopted.On the receiver side,single round of multi-user detection(MUD)without interference cancellation(IC)can reduce the processing delay.The imprecise synchronization between cMTC device and the gNB in connection-free transmission,e.g.,time and frequency offsets,are also considered.The simulation results shows that the proposed scheme can well satisfy the ambitious requirements of cMTC,and has the potential applications in supporting massive cMTC devices in 6G.