期刊文献+
共找到66篇文章
< 1 2 4 >
每页显示 20 50 100
(e,2e) triple-differential cross sections for Ag^+ (4p, 4s) in coplanar symmetric geometry
1
作者 周丽霞 燕友果 《Chinese Physics B》 SCIE EI CAS CSCD 2012年第9期204-207,共4页
The (e, 2e) triple-differential cross sections of Ag+ (4p, 4s) are calculated based on the three-body distorted-wave Born approximation considering post-collision interaction in coplanar symmetric geometry. The e... The (e, 2e) triple-differential cross sections of Ag+ (4p, 4s) are calculated based on the three-body distorted-wave Born approximation considering post-collision interaction in coplanar symmetric geometry. The energy of the outgoing electron is set to be 50, 70, 100, 200, 300,500, 700, and 1000 eV, and the intensity and splitting of forward and backward peaks are discussed in detail. Some new structures are observed around 15° and 85° for 4p and 4s orbitals. Structures in triple-differential cross sections at 15° are reported for the first time. A double-binary collision is proposed to explain the formation of such structures. The structures at 85° are also considered as the result of one kind of double-binary collision. 展开更多
关键词 (e 2e) process distorted-wave Born approximation triple-differential cross section coplanar symmetric geometry
下载PDF
The effect of dynamical screening on helium(e,2e) fully differential cross-sections
2
作者 孙世艳 贾祥富 +4 位作者 苗向阳 张均锋 谢祎 李雄伟 师文强 《Chinese Physics B》 SCIE EI CAS CSCD 2009年第7期2744-2748,共5页
This paper presents the fully differential cross sections (FDCS) for 102eV electron impact single ionization of helium for both the coplanar and perpendicular plane asymmetric geometries within the framework of dyna... This paper presents the fully differential cross sections (FDCS) for 102eV electron impact single ionization of helium for both the coplanar and perpendicular plane asymmetric geometries within the framework of dynamically screened three-Coulomb-wave theory. Comparisons are made with the experimental data and those of the three-Coulomb wave function model and second-order distorted-wave Born method. The angular distribution and relative heights of the present FDCS is found to be in very good agreement with the experimental data in the perpendicular plane geometry. It is shown that dynamical screening effects are significant in this geometry. Three-body coupling is expected to be weak in the coplanar geometry, although the precise absolute value of the cross section is still sensitive to the interaction details. 展开更多
关键词 fully differential cross sections screening effects perpendicular plane geometry
下载PDF
Simulating cross-sectional geometry of the main channel in response to changes in water and sediment in Lower Yellow River 被引量:4
3
作者 WANG Yanjun WU Baosheng ZHONG Deyu 《Journal of Geographical Sciences》 SCIE CSCD 2020年第12期2033-2052,共20页
To understand the non-equilibrium morphological adjustment of a river in response to environmental changes,it is essential to(i)accurately identify how past conditions of water and sediment have impacted current morph... To understand the non-equilibrium morphological adjustment of a river in response to environmental changes,it is essential to(i)accurately identify how past conditions of water and sediment have impacted current morphological adjustment of the river,and(ii)establish a corresponding simulation for non-equilibrium conditions.Based on discharge and suspended sediment concentration(SSC)as well as 82 cross-sectional data items for the Huayuankou-Lijin reach of the Lower Yellow River in the period 1965-2015,the process of adjustment of the geometry of the main channel(area,width,depth,and geomorphic coefficient),and its responses to changes in discharge and SSC for different reaches are statistically analyzed.Following this,a delayed response model(DRM)of the geometry of the main channel subjected to variations in discharge and SSC is established using a multi-step analytical model,with the discharge and SSC as the main controlling factors.The results show that the area,width,and depth of the main channel decreased initially,then increased,decreased again,and finally increased again.These features of the geometry of the channel were positively correlated with the 4-year moving average discharge and negatively with the 4-year moving average SSC.The geomorphic coefficient for the Huayuankou-Sunkou reach exhibited a trend of decrease,whereas that of the Sunkou-Lijin reach decreased initially,then increased,decreased again,and finally increased again.Except for the Huayuankou-Gaocun reach in 1965-1999,the coefficient was negatively correlated with the 4-year moving average discharge and positively with SSC.The simulated values of the morphological parameters of the main channel for all sub-reaches obtained using the DRM agreed well with the measured values.This indicates that the DRM can be used to simulate the process of response of the cross-sectional geometry of the main channel to variations in the water and sediment.The results of the model show that the adjustment of the geometry of the main channel was affected by the discharge and the SSC at present(30%)as well as for the previous 7 years(70%).The proposed model offers insights into the mechanism whereby past water and sediment influence the current morphological adjustment of the river,and provides an effective method for predicting the magnitude and trend of the geometry of the main channel under different flow conditions. 展开更多
关键词 Lower Yellow River water and sediment changes cross-sectional geometry of the main channel delayed response model
原文传递
Effect of Tool Shoulder and Pin Probe Profiles on Friction Stirred Aluminum Welds-a Comparative Study 被引量:5
4
作者 H.K.Mohanty M.M.Mahapatra +2 位作者 P.Kumar P.Biswas N.R.Mandal 《Journal of Marine Science and Application》 2012年第2期200-207,共8页
In marine application,marine grade steel is generally used for haul and superstructures.However,aluminum has also become a good choice due to its lightweight qualities,while rusting of aluminum is minimal compared to ... In marine application,marine grade steel is generally used for haul and superstructures.However,aluminum has also become a good choice due to its lightweight qualities,while rusting of aluminum is minimal compared to steel.In this paper a study on friction stir welding of aluminum alloys was presented.The present investigation deals with the effects of different friction stir welding tool geometries on mechanical strength and the microstructure properties of aluminum alloy welds.Three distinct tool geometries with different types of shoulder and tool probe profiles were used in the investigation according to the design matrix.The effects of each tool shoulder and probe geometry on the weld was evaluated.It was also observed that the friction stir weld tool geometry has a significant effect on the weldment reinforcement,microhardness,and weld strength. 展开更多
关键词 friction stir welding tool geometries weld strength weld cross section area
下载PDF
Effect of initial-state target polarization on the single ionization of helium by 1-keV electron impact 被引量:2
5
作者 孙世艳 马晓艳 +2 位作者 李霞 苗向阳 贾祥富 《Chinese Physics B》 SCIE EI CAS CSCD 2012年第7期275-279,共5页
We report new results of triple differential cross sections for the single ionization of helium by 1-KeV electron impact at the ejection energy of 10 eV. Investigations have been made for both the perpendicular plane ... We report new results of triple differential cross sections for the single ionization of helium by 1-KeV electron impact at the ejection energy of 10 eV. Investigations have been made for both the perpendicular plane and the plane perpendicular to the momentum transfer geometries. The present calculation is based on the threewCoulomb wave function. Here we have also incorporated the effect of target polarization in the initial state. A comparison is made between the present calculation with the results of other theoretical methods and a recent experiment [Diirr M, Dimopoulou C, Najjari B, Dorn A, Bartschat K, Bray I, Fursa D V, Chen Z, Madison D H and Ullrich J 2008 Phys. Rev. A 77 032717]. At an impact energy of 1 KeV, the target polarization is found to induce a substantial change of the cross section for the ionization process. We observe that the effect of target polarization plays a dominant role in deciding the shape of triple differential cross sections. 展开更多
关键词 triple differential cross section target polarization non-coplanar geometry
下载PDF
Electron-Helium Atom Collisions in the Presence of a Bichromatic Laser Field
6
作者 ZHU Zun-Lue LIANG Ming-Chao SUN Jin-Feng 《Communications in Theoretical Physics》 SCIE CAS CSCD 2008年第8期477-480,共4页
The differential cross section (DCS) for electron-helium atom collisions in the presence of a bichromatic CO2 laser field is investigated as a function of the scattering angle θ by employing first-Born approximati... The differential cross section (DCS) for electron-helium atom collisions in the presence of a bichromatic CO2 laser field is investigated as a function of the scattering angle θ by employing first-Born approximation (FBA) with a simple screening electric potential. We discuss in detail the influence of the scattering geometry, the photon energy and the number of photons exchanged on the DCSs. These illustrate that the three factors have important effects on the elastic scattering and the screening electric potential is effective. 展开更多
关键词 differential cross section bichromatic laser field first Born approximation scattering geometry
下载PDF
First assessment of Noise-Equivalent Sigma-Zero in GF3-02 TOPSAR mode with sea surface wind speed retrieval
7
作者 Junxin Yang Lihua Zhong +3 位作者 Xinzhe Yuan Xiaochen Wang Bing Han Yuxin Hu 《Acta Oceanologica Sinica》 SCIE CAS CSCD 2023年第10期84-96,共13页
Gaofen-3-02(GF3-02)is the first C-band synthetic aperture radar(SAR)satellite with terrain observation with progressive scans of SAR(TOPSAR)imaging mode in China,which plays an essential role in marine environment mon... Gaofen-3-02(GF3-02)is the first C-band synthetic aperture radar(SAR)satellite with terrain observation with progressive scans of SAR(TOPSAR)imaging mode in China,which plays an essential role in marine environment monitoring.Given the weak scattering characteristics of the ocean,the system thermal noise superimposed on SAR images has significant interference,especially in cross-polarization channels.Noise-Equivalent Sigma-Zero(NESZ)is a measure of the sensitivity of the radar to areas of low backscatter.The NESZ is defined to be the scattering cross-section coefficient of an area which contributes a mean level in the image equal to the signal-independent additive noise level.For TOPSAR,NESZ exhibits the shape of the SAR scanning gain curve in the azimuth and the shape of the antenna pattern in the range.Therefore,the accurate measurement of NESZ plays a vital role in the application of spaceborne SAR sea surface cross-polarization data.This paper proposes a theoretical calculation method for the NESZ curve in GF3-02 TOPSAR mode based on SAR noise inner calibration data and the imaging algorithm.A method for correcting the error existing in the theoretical curve of NESZ is also proposed according to the relationship between sea surface backscattering and wind speed and the same characteristics of target scattering in the overlapping area of adjacent sub-swaths.According to assessment with wide-swath TOPSAR cross-polarization data,the GF3-02 TOPSAR mode has a very low thermal noise level,which is better than−33 dB at the edge of each beam,and controlled below−38 dB at the center of the beam.The two-dimensional reference curves of the NESZ of each beam are provided to the GF3-02 TOPSAR users.After discussing the relationship between normalized radar cross section(NRCS)and wind speed,we provide a formula for NRCS related to wind speed and radar incidence angle.Compared with the NRCS derived from this formula and the NESZ-subtracted NRCS of SAR images,the bias is−0.0048 dB,the Root Mean Square Error is 1.671 dB and the correlation coefficient is 0.939. 展开更多
关键词 GF3-02 TOPSAR Noise-Equivalent Sigma-Zero(NESZ) cross-POLARIZATION normalized radar cross section(NRCS) sea surface wind
下载PDF
功能梯度材料吸能盒结构设计及优化
8
作者 张庆永 王宇超 王辉 《机械强度》 CAS CSCD 北大核心 2024年第2期371-380,共10页
传统的吸能盒结构,碰撞过程无法实现稳定有序折叠溃缩,同时存在单位质量吸能效果差的缺点,限制了汽车安全性能的提高。引入一种功能梯度材料(Functionally Graded Material,FGM)结构吸能盒,即在传统316L不锈钢基体上添加铝合金成分形成... 传统的吸能盒结构,碰撞过程无法实现稳定有序折叠溃缩,同时存在单位质量吸能效果差的缺点,限制了汽车安全性能的提高。引入一种功能梯度材料(Functionally Graded Material,FGM)结构吸能盒,即在传统316L不锈钢基体上添加铝合金成分形成梯度材料结构,同时仿照竹节虫胫骨截面结构对其横截面形状进行优化,并基于优化拉丁超立方体试验设计和响应面模型对竹节虫胫骨横截面的具体结构进行多目标优化。仿真结果表明,优化后的仿生功能梯度材料吸能盒能够实现稳定的从头部至尾部的折叠溃缩。和传统吸能盒相比,仿生结构功能梯度吸能盒单位质量吸能效果提升,能够有效削弱碰撞对车身的损伤。 展开更多
关键词 吸能盒 功能梯度结构 仿生截面 结构设计 多目标优化
下载PDF
Electron impact total(elastic+inelastic) cross sections with simple molecules consisting of N & O atoms at 100-1600eV 被引量:1
9
作者 孙金锋 施德恒 +1 位作者 朱遵略 刘玉芳 《Chinese Optics Letters》 SCIE EI CAS CSCD 2003年第11期624-626,共3页
A model complex optical potential rewritten by the conception of bonded atom, which considers the overlapping effect of electron cloud, is employed to calculate the total (elastic + inelastic) cross sections with simp... A model complex optical potential rewritten by the conception of bonded atom, which considers the overlapping effect of electron cloud, is employed to calculate the total (elastic + inelastic) cross sections with simple molecules (N2, O2, NO2, NO, N2O) consisting of N & O atoms over an incident energy range of 100 - 1600 eV by the use of additivity rule at Roothaan-Hartree-Fock level. In the study, the complex optical potential composed of static, exchange, correlation polarization plus absorption contributions firstly uses bonded-atom conception. The qualitative results are compared with experimental data and other calculations wherever available and good agreement is obtained. The total cross sections of electron-molecule scattering above 100 eV can be successfully calculated. 展开更多
关键词 of is in TCS cross sections with simple molecules consisting of N elastic+inelastic Electron impact total O atoms at 100-1600eV with
原文传递
Positron total cross sections for collisions with N_2 and CO_2 at 30-3000 eV
10
作者 施德恒 刘玉芳 +2 位作者 孙金锋 朱遵略 杨向东 《Chinese Optics Letters》 SCIE EI CAS CSCD 2006年第3期125-127,共3页
The total (elastic plus inelastic) cross sections for positron scattering from N2 and CO2 over the incident energy range from 30 to 3000eV are calculated using the additivity rule model at Hartree-Fock level. A comp... The total (elastic plus inelastic) cross sections for positron scattering from N2 and CO2 over the incident energy range from 30 to 3000eV are calculated using the additivity rule model at Hartree-Fock level. A complex optical model potential modified by incorporating the concept of bonded atom, which takes into account the overlapping effect of electron clouds between two atoms in a molecule, is employed to calculate the total cross section of positron-molecule scattering. The calculated total cross sections are in good agreement with those reported by experiments and other theories over a wide energy range. 展开更多
关键词 TCS Positron total cross sections for collisions with N2 and CO2 at 30-3000 eV THAN
原文传递
前陆盆地构造建模的原理与基本方法 被引量:37
11
作者 何登发 杨庚 +4 位作者 管树巍 石昕 张朝军 王桂宏 王晓波 《石油勘探与开发》 SCIE EI CAS CSCD 北大核心 2005年第3期7-14,共8页
中国中西部前陆盆地构造变形复杂,增大了地震资料的采集、处理、解释与成图的难度,是对圈闭钻探与油气田开发的严峻挑战。应用现代构造地质学的理论与方法建立前陆盆地及其冲断带合理的构造模型,成为油气勘探开发的关键环节。构造建模... 中国中西部前陆盆地构造变形复杂,增大了地震资料的采集、处理、解释与成图的难度,是对圈闭钻探与油气田开发的严峻挑战。应用现代构造地质学的理论与方法建立前陆盆地及其冲断带合理的构造模型,成为油气勘探开发的关键环节。构造建模要综合应用地表地质、遥感、钻井、重、磁、电、地震等资料,将地表构造、浅层构造与深层构造有机结合,建立几何学上内在协调的、运动学上平衡的与力学机制上可行的构造模型。主要遵循4个基本步骤,轴面分析是基础,断层褶皱形态分析是核心,平衡观念是灵魂,构造复原是手段。中国中西部地区不同类型前陆盆地构造建模的关键环节有较大差别。构造模型随着勘探程度的提高,将不断得到修正,从而越来越符合前陆盆地的特点,满足油气勘探开发的需要。 展开更多
关键词 前陆盆地 构造建模 轴面 平衡剖面 几何学 运动学 力学机制
下载PDF
不同截面微通道中流动阻力特性 被引量:9
12
作者 鲁进利 周宾 +3 位作者 许忠林 蒋洁 郭雨含 郝英立 《东南大学学报(自然科学版)》 EI CAS CSCD 北大核心 2011年第3期554-557,共4页
实验研究了微通道内去离子水的流动阻力特性,微通道当量直径范围De=0.210~1.069mm,雷诺数范围Re=102~104,截面形状分为矩形、半圆形及三角形.通过测量微通道沿程压降及出、入口局部压降随流量变化关系,获得了沿程阻力系数及局部阻力系... 实验研究了微通道内去离子水的流动阻力特性,微通道当量直径范围De=0.210~1.069mm,雷诺数范围Re=102~104,截面形状分为矩形、半圆形及三角形.通过测量微通道沿程压降及出、入口局部压降随流量变化关系,获得了沿程阻力系数及局部阻力系数.结果表明:当截面形状相同时,摩擦阻力系数随着当量直径的减小而降低;当量直径接近,截面形状不同时,其摩擦阻力系数也不相同;进、出口局部阻力系数变化趋势一致,且入口局部阻力系数要比出口的大;流型发生转变的临界雷诺数Rec=600~1 000. 展开更多
关键词 微通道 摩擦系数 局部损失 流动特性 截面形状
下载PDF
逆冲推覆构造最新研究进展评述 被引量:16
13
作者 张开均 施央申 +1 位作者 黄钟瑾 王良书 《地质与勘探》 CAS CSCD 北大核心 1996年第2期23-28,共6页
边冲推覆构造最新研究进展包括以下4个方面:1.创立新型逆冲推覆构造几何体系,其主要构造要素为台阶式逆冲断层,强调断裂与褶皱的相互关联性,可划分为断裂与褶皱两个分支系统。2.发展平衡构造剖面的研究方法,用于计算造山缩短... 边冲推覆构造最新研究进展包括以下4个方面:1.创立新型逆冲推覆构造几何体系,其主要构造要素为台阶式逆冲断层,强调断裂与褶皱的相互关联性,可划分为断裂与褶皱两个分支系统。2.发展平衡构造剖面的研究方法,用于计算造山缩短量并检验构造解释。3.发现韧性推覆产生糜棱岩、混合岩、花岗岩三位一体的成岩作用和对金矿床的控制作用;浅表推覆构造对油气藏的控制作用;浅表台阶式逆冲断层对金属矿藏的控制作用,这种控矿作用常具有系统性和层控性特点。4.建立褶皱冲断带增生楔力学模式,用以预测地壳形变的几体形态,并解释造山带陆壳的增生和生长。 展开更多
关键词 逆冲推覆构造 构造分类 岩石成因 控矿构造
下载PDF
一种基于网格图像的几何畸变修正方法 被引量:5
14
作者 梁亮 张定华 +2 位作者 赵歆波 毛海鹏 王凯 《计算机工程与应用》 CSCD 北大核心 2004年第2期4-6,共3页
在层削照相测量装置中,由于摄像装置所处的角度以及摄像镜头差,会导致获取的图像存在非线性几何畸变。因此在对图像进行重建之前,需要对获取的图像进行几何校正。为此,论文提出了一种基于网格图像的几何校正算法,该算法运用分段插值的思... 在层削照相测量装置中,由于摄像装置所处的角度以及摄像镜头差,会导致获取的图像存在非线性几何畸变。因此在对图像进行重建之前,需要对获取的图像进行几何校正。为此,论文提出了一种基于网格图像的几何校正算法,该算法运用分段插值的思想,利用分块低次插值去逼近几何畸变,达到高次插值的效果。最后的分析结果表明,利用60X60正方形网格,该算法的校正误差不超过0.1个像素,能够有效校正图像的综合畸变。 展开更多
关键词 几何校正 双线性插值 层削照相测量装置
下载PDF
复合材料中纱束的几何形态 被引量:11
15
作者 杨彩云 李嘉禄 田玲玲 《复合材料学报》 EI CAS CSCD 北大核心 2007年第4期123-127,共5页
在预测三维机织复合材料力学性能时,将纱线特别是纬纱横截面假设成何种形状一直众说纷纭。本文中假设纬纱截面形状分别为圆形、跑道形、凸透镜形、矩形,经纱横截面形状为矩形,采用刚度平均法和等应变力学模型计算了4种角联锁结构复合材... 在预测三维机织复合材料力学性能时,将纱线特别是纬纱横截面假设成何种形状一直众说纷纭。本文中假设纬纱截面形状分别为圆形、跑道形、凸透镜形、矩形,经纱横截面形状为矩形,采用刚度平均法和等应变力学模型计算了4种角联锁结构复合材料的弹性模量,经与复合材料的数字图像对比分析和实验验证表明,圆形纬纱截面形状假设与数字图像相差较大,与其它截面形状假设的弹性模量预测结果相差也较大,跑道形、凸透镜形、矩形等纬纱截面形状假设彼此间弹性模量预测结果的差异很小,与实验数据也具有较好的一致性。 展开更多
关键词 纱束 几何形态 截面形状 三维机织复合材料
下载PDF
小浪底水库运用后黄河下游河床调整规律 被引量:26
16
作者 夏军强 李洁 张诗媛 《人民黄河》 CAS 北大核心 2016年第10期49-55,共7页
小浪底水库的运用改变了坝下游的水沙条件,引起了黄河下游河道的再造床过程,给防洪及滩地利用等带来了一系列影响。利用黄河下游1999—2015年水沙及断面地形等实测资料,分析了近期黄河下游河床的调整过程及特点:1进入下游河道的年均沙... 小浪底水库的运用改变了坝下游的水沙条件,引起了黄河下游河道的再造床过程,给防洪及滩地利用等带来了一系列影响。利用黄河下游1999—2015年水沙及断面地形等实测资料,分析了近期黄河下游河床的调整过程及特点:1进入下游河道的年均沙量仅为0.88亿t,累计河床冲刷量达18.7亿m3,其中游荡段冲刷量占总冲刷量的72%,在冲刷过程中河道纵比降变化不大,河床粗化较为明显,床沙中值粒径由建库前的0.06 mm增大到水库运用后的0.15 mm;2河床断面形态调整较为显著,下游各河段调整均表现为向窄深方向发展,其中游荡段主槽展宽较为明显,平滩河宽由1999年的943 m增大到2015年的1 275 m,过渡段及弯曲段的平滩河宽调整较小,此外各河段平滩流量也显著增大,游荡段、过渡段、弯曲段平滩流量分别由1999年汛后的3 229、2 339、3 080 m3/s增大到2015年汛后的7 126、4 864、4 721m3/s;3河床平面形态总体保持稳定,各河段深泓摆动幅度均有所下降,其中游荡段的年平均深泓摆动幅度由建库前的234 m降低到水库运用后的123 m;4河段尺度的平滩河槽形态参数(如平滩河宽、平滩水深、平滩面积、平滩流量)及深泓摆动强度与水库运用后前4 a平均的水流冲刷强度密切相关。 展开更多
关键词 河床调整 断面形态 平面形态 河段平滩流量 小浪底水库 黄河下游
下载PDF
X形桩桩土相互作用对截面形状的力学响应 被引量:6
17
作者 吕亚茹 丁选明 +1 位作者 刘汉龙 刘义 《岩土力学》 EI CAS CSCD 北大核心 2015年第S2期357-364,共8页
现浇X形混凝土桩(简称XCC桩)是一种新型的异形截面桩,其桩土相互作用明显受截面形状的影响。前期已通过平衡分析法推导得到了考虑XCC桩截面形状的单桩荷载传递计算方法,但控制桩土相互作用的一个重要参数即桩土剪切作用系数对截面几何... 现浇X形混凝土桩(简称XCC桩)是一种新型的异形截面桩,其桩土相互作用明显受截面形状的影响。前期已通过平衡分析法推导得到了考虑XCC桩截面形状的单桩荷载传递计算方法,但控制桩土相互作用的一个重要参数即桩土剪切作用系数对截面几何形状的力学响应尚未得到系统的研究。文中分析了桩土剪切作用系数对不同荷载形式下XCC桩3个截面控制参数(外包圆半径R、开弧间距2a、开弧角θX)的影响,并与等截面面积的圆形桩进行了对比。分析结果表明,截面参数变化时,桩土相互作用也随之变化,在截面面积、周长和桩土剪切作用的共同作用下桩身轴力随外包圆半径和开弧角度的增大而减小,随开弧间距的增大而增大,且始终小于等截面面积的圆形桩。 展开更多
关键词 现浇X形混凝土桩(XCC桩) 截面形状 桩土相互作用 剪切作用系数
下载PDF
三峡工程运用后荆江河段崩岸时空分布及其对河床调整的影响 被引量:7
18
作者 夏军强 刘鑫 +3 位作者 邓珊珊 周美蓉 李志威 彭玉明 《湖泊科学》 EI CAS CSCD 北大核心 2022年第1期296-306,共11页
三峡工程运用后长江中游荆江河段河床持续冲刷,局部河段崩岸频发,影响河道内悬沙输移与河床形态调整.本研究采用实测长程河道地形及固定断面地形资料,确定了2002-2018年荆江河段的主要崩岸区域,估算了崩岸土体的泥沙总量,进而定量分析... 三峡工程运用后长江中游荆江河段河床持续冲刷,局部河段崩岸频发,影响河道内悬沙输移与河床形态调整.本研究采用实测长程河道地形及固定断面地形资料,确定了2002-2018年荆江河段的主要崩岸区域,估算了崩岸土体的泥沙总量,进而定量分析了河岸崩退对河床调整的影响.计算结果表明:荆江段累计河岸崩退体积约为2.0亿m^(3),约占该河段总冲刷量的17.5%;腊林洲及北门口河段累计崩岸体积与累计水流冲刷强度呈较好的幂函数关系(R^(2)=0.95,0.97);荆江段崩岸土体泥沙总量为2.7亿t,其中枝城-监利河段崩岸土体总量为1.67亿t,约占该河段沿程泥沙补给总量的30.7%,因此崩岸土体对悬沙沿程恢复有重要贡献;河岸持续崩退过程中,崩岸河段内的断面形态趋于宽浅,护岸工程修建后则明显趋于窄深,因此河道崩岸过程在一定程度上减缓了河床的冲深下切程度. 展开更多
关键词 河道崩岸 崩岸土体体积 断面形态 河床调整 荆江河段 三峡工程
下载PDF
非共面双对称几何条件下电子离化He的(e,2e)反应 被引量:4
19
作者 高矿 杨欢 +1 位作者 吴兴举 张穗萌 《原子与分子物理学报》 CAS CSCD 北大核心 2008年第3期683-690,共8页
运用修正后的BBK理论计算了入射能为27.6 eV,29.6 eV和34.6 eV,非共面双对称几何条件下,电子入射离化氦原子的三重微分截面,计算结果与实验结果进行比较发现两者符合的较好.验证了低入射能时修正后的BBK模型同样适用于非共面双对称条件... 运用修正后的BBK理论计算了入射能为27.6 eV,29.6 eV和34.6 eV,非共面双对称几何条件下,电子入射离化氦原子的三重微分截面,计算结果与实验结果进行比较发现两者符合的较好.验证了低入射能时修正后的BBK模型同样适用于非共面双对称条件下的(e,2e)过程.从碰撞的微观机理上分析了影响出射电子角分布的原因. 展开更多
关键词 非共面 双对称几何条件 三重微分截面 BBK模型 角分布 索末菲参量
下载PDF
不共面对称条件下电子离化He原子的三重微分截面 被引量:4
20
作者 吴兴举 宋军 张穗萌 《安徽师范大学学报(自然科学版)》 CAS 2006年第2期127-129,共3页
运用修正后的BBK理论计算了入射能E0=64.6eV,不共面对称等能条件下电子入射离化氦原子的三重微分截面,所得结果与实验进行比较,符合较好.指出:对3C波函数进行索末菲参量的修正是成功的,这一修正使得BBK模型也能对不共面对称等能条件下... 运用修正后的BBK理论计算了入射能E0=64.6eV,不共面对称等能条件下电子入射离化氦原子的三重微分截面,所得结果与实验进行比较,符合较好.指出:对3C波函数进行索末菲参量的修正是成功的,这一修正使得BBK模型也能对不共面对称等能条件下的低能(e,2e)过程给出很好的描述. 展开更多
关键词 BBK模型 索末菲参量 三重微分截面 不共面对称等能条件
下载PDF
上一页 1 2 4 下一页 到第
使用帮助 返回顶部