Based on GPS velocity during 1999-2007,GPS baseline time series on large scale during1999-2008 and cross-fault leveling data during 1985-2008,the paper makes some analysis and discussion to study and summarize the mov...Based on GPS velocity during 1999-2007,GPS baseline time series on large scale during1999-2008 and cross-fault leveling data during 1985-2008,the paper makes some analysis and discussion to study and summarize the movement,tectonic deformation and strain accumulation evolution characteristics of the Longmenshan fault and the surrounding area before the MS8. 0 Wenchuan earthquake,as well as the possible physical mechanism late in the seismic cycle of the Wenchuan earthquake. Multiple results indicate that:GPS velocity profiles show that obvious continuous deformation across the eastern Qinghai-Tibetan Plateau before the earthquake was distributed across a zone at least 500 km wide,while there was little deformation in Sichuan Basin and Longmenshan fault zone,which means that the eastern Qinghai-Tibetan Plateau provides energy accumulation for locked Longmenshan fault zone continuously. GPS strain rates show that the east-west compression deformation was larger in the northwest of the mid-northern segment of the Longmenshan fault zone,and deformation amplitude decreased gradually from far field to near fault zone,and there was little deformation in fault zone. The east-west compression deformation was significant surrounding the southwestern segment of the Longmenshan fault zone,and strain accumulation rate was larger than that of mid-northern segment.Fault locking indicates nearly whole Longmenshan fault was locked before the earthquake except the source of the earthquake which was weakly locked,and a 20 km width patch in southwestern segment between 12 km to 22. 5 km depth was in creeping state. GPS baseline time series in northeast direction on large scale became compressive generally from 2005 in the North-South Seismic Belt,which reflects that relative compression deformation enhances. The cross-fault leveling data show that annual vertical change rate and deformation trend accumulation rate in the Longmenshan fault zone were little,which indicates that vertical activity near the fault was very weak and the fault was tightly locked. According to analyses of GPS and cross-fault leveling data before the Wenchuan earthquake,we consider that the Longmenshan fault is tightly locked from the surface to the deep,and the horizontal and vertical deformation are weak surrounding the fault in relatively small-scale crustal deformation. The process of weak deformation may be slow,and weak deformation area may be larger when large earthquake is coming. Continuous and slow compression deformation across eastern Qinghai-Tibetan Plateau before the earthquake provides dynamic support for strain accumulation in the Longmenshan fault zone in relative large-scale crustal deformation.展开更多
Aiming at different variation patterns of cross-fault short-leveling before earthquakes,the paper establishes the 2-D finite-element models with different crustal stratification and fault occurrence perpendicular to L...Aiming at different variation patterns of cross-fault short-leveling before earthquakes,the paper establishes the 2-D finite-element models with different crustal stratification and fault occurrence perpendicular to Longmenshan fault zone. By contact analysis and viscoelastic finite element method,the influence of fault structure on cross-fault short-leveling is obtained under the same constraint conditions,the results show that:with the increase of the horizontal projection distance of fault,the cumulative displacements of surface increase gradually in the models with fixed dip angles of the fault plane(model 1). However,when the horizontal projection distance exceeds 20 km,the influence of fault?s dip angle on the cumulative displacements of surface short-leveling will decrease significantly,and the cumulative displacements are maintained at about 1. 5 m. However,in the listric fault models(model 2),when the projection distance is less than 20 km,the listric fault structure impedes the sliding of fault. The short-leveling variation rate is only half of model 1;as a result,the ability to reflect the regional stress enhancement by cross-fault short-leveling is further weakened. But when the horizontal projection distance exceeds25 km,the cumulative displacements significantly increase,with the maximum displacement reaching 1. 75 m. The results of equivalent stress show that the listric fault structure causes a sudden increasement in equivalent stress when the horizontal projection distance is 10 km,higher equivalent stress values are accumulated between the projection distance of 5-20 km,and then high-low stress difference zones are formed at the bottom of the fault plane and near the transition zone of low-high dip angle.展开更多
GPS data and precise leveling data of seismic network profiles across the fault in Baotou in 2006, 2009 and 2011 were processed and analyzed to test the feasibility of using GPS technology for fault-crossing vertical ...GPS data and precise leveling data of seismic network profiles across the fault in Baotou in 2006, 2009 and 2011 were processed and analyzed to test the feasibility of using GPS technology for fault-crossing vertical deformation monitoring. The results showed that high precision cross-fauh vertical deformation measurements can be obtained using appropriate GPS data processing strategies.展开更多
This study analyzes data regarding cross-fault deformations within the seismogenic zone of the 2016 Qinghai Menyuan Ms6.4 earthquake and its surrounding area. The results showed that the tendency anomaly sites near th...This study analyzes data regarding cross-fault deformations within the seismogenic zone of the 2016 Qinghai Menyuan Ms6.4 earthquake and its surrounding area. The results showed that the tendency anomaly sites near the epicenter had relatively long anomaly durations prior to the earthquake, while sudden-jumping anomaly sites started to increase in the middle eastern Qilian Mountains approximately a year before the earthquake and continued to increase and migrate towards the vicinity of the epicenter two to six months before the earthquake. Intensive observations a few days after the earthquake indicated that abnormal returns and turns before the earthquake were significant, but all had small amplitudes, and the coseismic effect was generally minor. In addition, the post-seismic tendency analysis of individual cross faults in the Qilian Mountain fault zone revealed an accelerating thrust tendency at all cross-fault sites in the middle Qilian Mountains after the 2008 Wenchuan Ms8.0 earthquake. This indicates that the Wenchuan mega-earthquake exerted a great impact on the dynamic environment of the northeastern margin of the Qinghai-Tibet plate and significantly enhanced the extrusion effect of the Indian plate on the middle Qilian Mountains, generating favorable conditions for the occurrence of Menyuan thrust earthquakes.展开更多
On the basis of the comparison data of Stage II of the tunnel site leveling project at Hutubi seismic station and the observation data of Stage IV of the site cross fault leveling project at Hutubi and the level obser...On the basis of the comparison data of Stage II of the tunnel site leveling project at Hutubi seismic station and the observation data of Stage IV of the site cross fault leveling project at Hutubi and the level observation data from the cross fault survey lines in Dafeng from 1987 to 2012,this paper analyses the variation rates of the tunnel site leveling observation results and the difference of annual change rates of the cross fault level observations at Hongshan seismic station in Hutubi. This paper concludes the reliability of the Ni004 optical level used by the station and puts forward a proposal based on the analysis. This paper also explores the cross fault leveling research on the ground deformation in the region concerned on the basis of the historical observation of the cross fault level at Dafeng and the comparison results of the tunnel site leveling observation in Hutubi.展开更多
基金supported by the National Key R&D Program of China(2018YFC1503606 2017YFC1500502)Earthquake Tracking Task(2019010215)
文摘Based on GPS velocity during 1999-2007,GPS baseline time series on large scale during1999-2008 and cross-fault leveling data during 1985-2008,the paper makes some analysis and discussion to study and summarize the movement,tectonic deformation and strain accumulation evolution characteristics of the Longmenshan fault and the surrounding area before the MS8. 0 Wenchuan earthquake,as well as the possible physical mechanism late in the seismic cycle of the Wenchuan earthquake. Multiple results indicate that:GPS velocity profiles show that obvious continuous deformation across the eastern Qinghai-Tibetan Plateau before the earthquake was distributed across a zone at least 500 km wide,while there was little deformation in Sichuan Basin and Longmenshan fault zone,which means that the eastern Qinghai-Tibetan Plateau provides energy accumulation for locked Longmenshan fault zone continuously. GPS strain rates show that the east-west compression deformation was larger in the northwest of the mid-northern segment of the Longmenshan fault zone,and deformation amplitude decreased gradually from far field to near fault zone,and there was little deformation in fault zone. The east-west compression deformation was significant surrounding the southwestern segment of the Longmenshan fault zone,and strain accumulation rate was larger than that of mid-northern segment.Fault locking indicates nearly whole Longmenshan fault was locked before the earthquake except the source of the earthquake which was weakly locked,and a 20 km width patch in southwestern segment between 12 km to 22. 5 km depth was in creeping state. GPS baseline time series in northeast direction on large scale became compressive generally from 2005 in the North-South Seismic Belt,which reflects that relative compression deformation enhances. The cross-fault leveling data show that annual vertical change rate and deformation trend accumulation rate in the Longmenshan fault zone were little,which indicates that vertical activity near the fault was very weak and the fault was tightly locked. According to analyses of GPS and cross-fault leveling data before the Wenchuan earthquake,we consider that the Longmenshan fault is tightly locked from the surface to the deep,and the horizontal and vertical deformation are weak surrounding the fault in relatively small-scale crustal deformation. The process of weak deformation may be slow,and weak deformation area may be larger when large earthquake is coming. Continuous and slow compression deformation across eastern Qinghai-Tibetan Plateau before the earthquake provides dynamic support for strain accumulation in the Longmenshan fault zone in relative large-scale crustal deformation.
基金supported by the Youth Science and Technology Fund of China Earthquake Networks Center(QNJJ201801)the National Key R&D Programof China(2018YFC0807000)
文摘Aiming at different variation patterns of cross-fault short-leveling before earthquakes,the paper establishes the 2-D finite-element models with different crustal stratification and fault occurrence perpendicular to Longmenshan fault zone. By contact analysis and viscoelastic finite element method,the influence of fault structure on cross-fault short-leveling is obtained under the same constraint conditions,the results show that:with the increase of the horizontal projection distance of fault,the cumulative displacements of surface increase gradually in the models with fixed dip angles of the fault plane(model 1). However,when the horizontal projection distance exceeds 20 km,the influence of fault?s dip angle on the cumulative displacements of surface short-leveling will decrease significantly,and the cumulative displacements are maintained at about 1. 5 m. However,in the listric fault models(model 2),when the projection distance is less than 20 km,the listric fault structure impedes the sliding of fault. The short-leveling variation rate is only half of model 1;as a result,the ability to reflect the regional stress enhancement by cross-fault short-leveling is further weakened. But when the horizontal projection distance exceeds25 km,the cumulative displacements significantly increase,with the maximum displacement reaching 1. 75 m. The results of equivalent stress show that the listric fault structure causes a sudden increasement in equivalent stress when the horizontal projection distance is 10 km,higher equivalent stress values are accumulated between the projection distance of 5-20 km,and then high-low stress difference zones are formed at the bottom of the fault plane and near the transition zone of low-high dip angle.
基金supported by the Special Earthquake Research Project granted by the China Earthquake Administration(201208009)
文摘GPS data and precise leveling data of seismic network profiles across the fault in Baotou in 2006, 2009 and 2011 were processed and analyzed to test the feasibility of using GPS technology for fault-crossing vertical deformation monitoring. The results showed that high precision cross-fauh vertical deformation measurements can be obtained using appropriate GPS data processing strategies.
基金supported by the Youth Seismic Regime Tracking Project in the Year of 2016,China Earthquake Administration(2016010217)the Special Earthquake Research Project granted by the China Earthquake Administration(201508009)
文摘This study analyzes data regarding cross-fault deformations within the seismogenic zone of the 2016 Qinghai Menyuan Ms6.4 earthquake and its surrounding area. The results showed that the tendency anomaly sites near the epicenter had relatively long anomaly durations prior to the earthquake, while sudden-jumping anomaly sites started to increase in the middle eastern Qilian Mountains approximately a year before the earthquake and continued to increase and migrate towards the vicinity of the epicenter two to six months before the earthquake. Intensive observations a few days after the earthquake indicated that abnormal returns and turns before the earthquake were significant, but all had small amplitudes, and the coseismic effect was generally minor. In addition, the post-seismic tendency analysis of individual cross faults in the Qilian Mountain fault zone revealed an accelerating thrust tendency at all cross-fault sites in the middle Qilian Mountains after the 2008 Wenchuan Ms8.0 earthquake. This indicates that the Wenchuan mega-earthquake exerted a great impact on the dynamic environment of the northeastern margin of the Qinghai-Tibet plate and significantly enhanced the extrusion effect of the Indian plate on the middle Qilian Mountains, generating favorable conditions for the occurrence of Menyuan thrust earthquakes.
基金sponsored by the Natural Science Foundation of Xinjiang Uighur Autonomous Region2012211B56)the Natural Science Foundation of China(41374031)the Earthquake Science and Technology Spark Plan(XH1030),and the Earthquake Science and Technology Spark Progam XH14054Y)
文摘On the basis of the comparison data of Stage II of the tunnel site leveling project at Hutubi seismic station and the observation data of Stage IV of the site cross fault leveling project at Hutubi and the level observation data from the cross fault survey lines in Dafeng from 1987 to 2012,this paper analyses the variation rates of the tunnel site leveling observation results and the difference of annual change rates of the cross fault level observations at Hongshan seismic station in Hutubi. This paper concludes the reliability of the Ni004 optical level used by the station and puts forward a proposal based on the analysis. This paper also explores the cross fault leveling research on the ground deformation in the region concerned on the basis of the historical observation of the cross fault level at Dafeng and the comparison results of the tunnel site leveling observation in Hutubi.
