Voltage-modulated polymer nanopore field-effect transistor for multi-sized nanoparticle detection

Solid-state nanopores offer a range of distinct advantages over biological nanopores,such as structural diversity and greater stability and durability;this makes them highly promising for high-resolution nanoparticle sensing.Biological nanopores can exhibit gating characteristics with stress-responsive switches and can demonstrate specificity toward particular molecules.Drawing inspiration from biological nanopores,this paper introduces a novel polymer nanopore with field-effect characteristics,leveraging a conductive polymer in its construction to showcase intriguing gating behavior.Notably,in this device,the polymer layer serves as the gate,enabling precise control over the source–drain current response inside and outside the pore by simply adjusting the gate voltage.This unique feature allows fine-tuning of the nanopore’s sensitivity to nanoparticles of varying sizes and facilitates its operation in multiple modes.Experimental results reveal that the developed polymer nanopore field-effect transistor demonstrates remarkable selectivity in detecting nanoparticles of various sizes under different applied voltages.The proposed single device demonstrates the exceptional ability to detect multiple types of nanoparticle,showcasing its immense potential for a wide range of applications in biological-particle analysis and medical diagnostics.

Improved Plasmonic Hot‑Electron Capture in Au Nanoparticle/Polymeric Carbon Nitride by Pt Single Atoms for Broad‑Spectrum Photocatalytic H_(2)Evolution

ABSTRACT Rationally designing broad-spectrum photocatalysts to harvest whole visible-light region photons and enhance solar energy conversion is a“holy grail”for researchers,but is still a challenging issue.Herein,based on the common polymeric carbon nitride(PCN),a hybrid co-catalysts system comprising plasmonic Au nanoparticles(NPs)and atomically dispersed Pt single atoms(PtSAs)with different functions was constructed to address this challenge.For the dual co-catalysts decorated PCN(PtSAs–Au_(2.5)/PCN),the PCN is photoexcited to generate electrons under UV and short-wavelength visible light,and the synergetic Au NPs and PtSAs not only accelerate charge separation and transfer though Schottky junctions and metal-support bond but also act as the co-catalysts for H_(2) evolution.Furthermore,the Au NPs absorb long-wavelength visible light owing to its localized surface plasmon resonance,and the adjacent PtSAs trap the plasmonic hot-electrons for H_(2) evolution via direct electron transfer effect.Consequently,the PtSAs–Au_(2.5)/PCN exhibits excellent broad-spectrum photocatalytic H_(2) evolution activity with the H_(2) evolution rate of 8.8 mmol g^(−1) h^(−1) at 420 nm and 264μmol g^(−1) h^(−1) at 550 nm,much higher than that of Au_(2.5)/PCN and PtSAs–PCN,respectively.This work provides a new strategy to design broad-spectrum photocatalysts for energy conversion reaction.

Relaxin-encapsulated polymeric metformin nanoparticles remodel tumor immune microenvironment by reducing CAFs for efficient triple-negative breast cancer immunotherapy

Cancer-associated fibroblasts(CAFs)are one of the most abundant stromal cells in the tumor microenvironment which mediate desmoplastic response and are the primary driver for an immunosuppressive microenvironment,leading to the failure of triple-negative breast cancer(TNBC)immunotherapy.Therefore,depleting CAFs may enhance the effect of immunotherapy(such as PD-L1 antibody).Relaxin(RLN)has been demonstrated to significantly improve transforming growth factor-β(TGF-β)induced CAFs activation and tumor immunosuppressive microenvironment.However,the short half-life and systemic vasodilation of RLN limit its in vivo efficacy.Here,plasmid encoding relaxin(pRLN)to locally express RLN was delivered with a new positively charged polymer named polymeric metformin(PolyMet),which could increase gene transfer efficiency significantly and have low toxicity that have been certified by our lab before.In order to improve the stability of pRLN in vivo,this complex was further formed lipid poly-γ-glutamic acid(PGA)/PolyMetpRLN nanoparticle(LPPR).The particle size of LPPR was 205.5±2.9 nm,and the zeta potential was+55.4±1.6 mV.LPPR displayed excellent tumor penetrating efficacy and weaken proliferation of CAFs in 4T1luc/CAFs tumor spheres in vitro.In vivo,it could reverse aberrantly activated CAFs by decreasing the expression of profibrogenic cytokine and remove the physical barrier to reshape the tumor stromal microenvironment,which enabled a 2.2-fold increase in cytotoxic T cell infiltration within the tumor and a decrease in immunosuppressive cells infiltration.Thus,LPPR was observed retarded tumor growth by itself in the 4T1 tumor bearing-mouse,and the reshaped immune microenvironment further led to facilitate antitumor effect when it combined with PD-L1 antibody(aPD-L1).Altogether,this study presented a novel therapeutic approach against tumor stroma using LPPR to achieve a combination regimen with immune checkpoint blockade therapy against the desmoplastic TNBC model.

POLYMERIC NANOPARTICLES FROM SUPERCRITICAL CO_2 MICROEMULSION POLYMERIZATION

Herein, we reported the microemulsion polymerization in supercritical carbon dioxide. With the aid of an anionic phosphate fluorosurfactant （bis-[2-（F-hexyl）ethyl]phosphate sodium）, water-soluble/CO2-insoluble acryloxyethyltrimethyl ammonium chloride monomer and N,N＇-methylene-bisacrylamide cross-linker were solubilized into CO2 continuous phase via the formation of water-in-CO2 （w/c） microemulsion water pools. Initiated by a CO2-soluble initiator, 2,2＇-azo-bisisobutyronitrile （AIBN）, cross-linked poly（acryloxyethyltrimethyl ammonium chloride） particles were produced and stabilized in these w/c internal water pools. Nano-sized particles with sizes less than 20 nm in diameter and narrow particle size distributions were obtained.

Lipase Immobilization onto the Surface of PGMA-b-PDMAEMA-grafted Magnetic Nanoparticles Prepared via Atom Transfer Radical Polymerization

A block copolymer of 2-dimethylaminoethyl methacrylate(DMAEMA) and glycidyl methacrylate(GMA)was grafted onto the surface of magnetic nanoparticles(Fe3O4) via atom transfer radical polymerization.The resultant PGMA-b-PDMAEMA-grafted-Fe3O4 magnetic nanoparticles with amino and epoxy groups were characterized by Fourier transform infrared spectroscopy, powder X-ray diffraction, thermo-gravimetric analysis, and scanning electron microscopy. Lipase from Burkholderia cepacia was successfully immobilized onto the magnetic nanoparticles by physical adsorption and covalent bonding. The immobilization capacity of the magnetic particles is 0.5 mg lipase per mg support, with an activity recovery of up to 43.1% under the optimum immobilization condition. Biochemical characterization shows that the immobilized lipase exhibits improved thermal stability, good tolerance to organic solvents with high lg P, and higher p H stability than the free lipase at p H 9.0. After six consecutive cycles, the residual activity of the immobilized lipase is still over55% of its initial activity.

NOVEL HYBRID GENE VECTOR STABILIZED BY CROSS-LINKING WITH GOLD NANOPARTICLES

Enhanced stability of polyplexes in physiological condition was an important prerequisite for successful systemic gene delivery.Herein novel method was reported to develop stable gene vector by nanotechnology.Thiolated polyplexes were constructed and then cross-linked with gold nanoparticles(AuNPs)by gold-thiol interactions.TEM pictures showed that AuNPs were attached to the shell of spherical polyplexes.The hybrid gene vector was stable enough in physiological condition and maintained efficient transfectio...

THE PREPARATION OF DOXORUBICIN-POLYVINYLPYRROLIDONE-NANOPARTICLES BY INVERSE EMULSION POLYMERIZATION

Doxorubicin-loaded nanoparticles, using doxorubicin （ADM） as model drug and vinylpyrrolidone as matrix, were prepared by inverse emulsion polymerization in the paper. The nanoparticles were characterized by telescope electron microscopy （TEM）, laser light scattering technique （LLS） and infrared spectrum （IR）. LLS test showed that the optimal prepared ADM-loaded nanoparticles had an average size 18.8nm and a narrow size distribution between 15nm and 32nm, which was consistent with the result obtained by TEM. And 1R results indicated that the nanoparticles consisted of ADM and polyvinylpyrrolidone （PVP）.

Diffusion of Nanoparticles in Semidilute Polymer Solutions： A Multiparticle Collision Dynamics Study

The diffusion of nanoparticles immersed in semidilute polymer solutions is investigated by a hybrid mesoscopic multiparticle collision dynamics method. Effects of polymer concentration and hydrodynamic interactions among polymer monomers are focused. Extensive simulations show that the dependence of diffusion coefficient D on the polymer concentration c agrees with Phillies equation D-exp （-αc^δ） with a scaling exponent δ≈0.97 which coincides with the experimental one in literature. For increasing nanoparticle size, the scaling prefactor α increases monotonically while the scaling exponent always keeps fixed. Moreover, we also study the diffusion of nanoparticle without hydrodynamic interactions and find that mobility of the nanoparticle slows down, and the scaling exponent is obviously different from the one in experiments, implying that hydrodynamic interactions play a crucial role in the diffusion of a nanoparticle in semidilute polymer solutions.

pH-sensitive Nanoparticles for High Loading and Efficient Delivery of Doxorubicin

An acid-sensitive delivery system based on acylhydrazone bond was developed for high loading and efficient delivery of doxorubicin.Doxorubicin(DOX)was covalently combined with dihydrazide adipate to form acid-sensitive hydrazone bond based on Schiff base reaction,then the intermediate was covalently combined with carboxymethyl chitosan through amide bond to form polymeric prodrugs,and nanoparticles were formed through self-assembling.Moreover,the structural and particle properties of CMCS-ADH-DOX were characterized by ultraviolet visible near infrared spectrophotometry(UV),nuclear magnetic resonance spectroscopy(^(1)H-NMR),fourier transform infrared spectroscopy(FT-IR),dynamic light scattering(DLS),and transmission electron microscopy(TEM).The mean diameter of the self-assembled nanoparticles is 165 nm,while the morphology is a relatively uniform spherical shape.Moreover,these DOXloaded nanoparticles showed pH-triggered drug release behavior.Compared with free DOX,CAD NPs showed lower toxic side effects in L929 cells and similar toxicity in 4T1 cells.The experimental results indicate that the CMCS-ADH-DOX nanoparticles may be used as an acid-sensitive targeted delivery system with good application prospect for cancer.

In situ formed cross-linked polymer networks as dual-functional layers for high-stable lithium metal batteries

Lithium-metal anodes(LMAs)have been recognized as the ultimate anodes for next-generation batteries with high energy density,but stringent assembly-environment conditions derived from the poor moisture stability dramatically hinder the transformation of LMAs from laboratory to industry.Herein,an in situ formed cross-linked polymer layer on LMAs is designed and constructed by a facile thiol-acrylate click chemistry reaction between poly(ethylene glycol)diacrylate(PEGDA)and the crosslinker containing multi thiol groups under UV irradiation.Owing to the hydrophobic nature of the layer,the treated LMAs demonstrate remarkable humid stability for more than 3 h in ambient air(70%relative humidity).The coating humid-resistant protective layer also possesses a dual-functional characterization as solid polymer electrolytes by introducing lithium bis(trifluoromethanesulfonyl)imide in the system in advance.The intimate contact between the polymer layer and LMAs reduces interfacial resistance in the assembled Li/LiFePO_(4)or Li/LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)full cell effectively,and endows the cell with an outstanding cycle performance.

A UV cross-linked gel polymer electrolyte enabling high-rate and high voltage window for quasi-solid-state supercapacitors

Serving as a promising alternative to liquid electrolyte in the application of portable and wearable devices,gel polymer electrolytes(GPEs)are expected to obtain more preferable properties rather than just be satisfied with the merits of high safety and deformability.Here,an easy-operated method is employed to fabricate cross-linked composite polymer membranes used for GPEs assisted by UV irradiation,in which N-doped carbon quantum dots(N-CQDs)and TiO2are introduced as photocatalysts and additives to improve the performances of GPEs.Specifically,N-CQDs participate as a cross-linker to construct the inner porous structure,and TiO2nanoparticles serve as a stabilizer to improve the electrochemical stability of GPEs under high voltage(3.5 V).The excellent thermal and mechanical stability of the membrane fabricated in this work guarantee the safety of the supercapacitors(SCs).This GPE based SC not only exhibits prominent rate performance(105%capacitance retention at the current density of 40A g^(-1))and cyclic stability(85%at 1 A g^(-1)under 3.5 V after 20,000 cycles),but also displays remarkable energy density(42.88 Wh kg^(-1))with high power density(19.3 k W kg^(-1)).Moreover,the superior rate and cycling performances of the as-prepared GPE based flexible SCs under flat and bending state confirm the feasibility of its application in flexible energy storage devices.

Ordered Toroid Structures of Nanoparticles in Self-attractive Semiflexible Polymer/Nanoparticle Composites

By employing dynamic Monte Carlo simulations, we investigate a coil-to-toroid transition of self-attractive semiflexible polymers and the spatial distributions of nanoparticles in self- attractive semiflexible polymer/nanoparticle composites. The conformation of self-attractive semiflexible polymers depends on bending energy and self-attractive interactions between monomers in polymer chains. A three-stage process of toroid formation for self-attractive semiflexible chains is shown： several isolated toroids, a loose toroid structure, and a compact toroid structure. Utilizing the compact toroid conformations of self-attractive semiflexible chains, we can control effectively the spatial distributions of nanoparticles in self-attractive semiflexible polymer nanocomposites, and an unconventional toroid structure of nanoparti- cles is observed.

Superparticles Formed by Amphiphilic Tadpole-like Single Chain Polymeric Nanoparticles and Their Application as an Ultrasonic Responsive Drug Carrier

Herein, we report self-assembly of tadpole-like single chain polymeric nanoparticles （TPPs） and the ultrasonic response of the resultant superparticles. The TPPs are with an intramolecularly crosslinked poly（2-（methacryloyloxy）ethyl pent-4-ynoate）-rpoly（hydroxyethyl methacrylate） （PMAEP-r-PHEMA） chain as the ＂head＂ and a poly（2- （dimethylamino）ethyl methacrylate （PDMAEMA） linear chain as the ＂tail＂, and are pre- pared simply and emciently by Glaser-coupling of the pendant alkynes in the PMAEP-r- PHEMA block in the common solvent methanol. The formation of the TPPs was confirmed by gel permeation chromatograph, nuclear magnetic resonance spectroscopy, dynamic light scattering, static dynamic scattering, and transmission electron microscopy. In aqueous solution, the amphiphilic TPPs could self-assemble into regular superparticles, driven by aggregation of the hydrophobic ＂heads＂. Since in the structure there is no chain entanglement and the embedding of PDMAEMA chains disturb close-packing of the ＂heads＂, the superpartieles are responsive to a low-energy ultrasonic vibration, as evidenced by greatly enhanced release of the functional molecules from the superparticles by treatment of a low-energy ultrasound. Therefore, the superparticles should be very promising in the use as the drug carriers that can be manipulated from a long distance, considering that ultrasonic energy can be focused at a small area in a relatively long distance from the ultrasound-radiating source.

Mussel‑Inspired Redox‑Active and Hydrophilic Conductive Polymer Nanoparticles for Adhesive Hydrogel Bioelectronics

Conductive polymers(CPs)are generally insoluble,and developing hydrophilic CPs is significant to broaden the applications of CPs.In this work,a mussel-inspired strategy was proposed to construct hydrophilic CP nanoparticles(CP NPs),while endowing the CP NPs with redox activity and biocompatibility.This is a universal strategy applicable for a series of CPs,including polyaniline,polypyrrole,and poly(3,4-ethylenedioxythiophene).The catechol/quinone contained sulfonated lignin(LS)was doped into various CPs to form CP/LS NPs with hydrophilicity,conductivity,and redox activity.These CP/LS NPs were used as versatile nanofillers to prepare the conductive hydrogels with long-term adhesiveness.The CP/LS NPs-incorporated hydrogels have a good conductivity because of the uniform distribution of the hydrophilic NPs in the hydrogel network,forming a well-connected electric path.The hydrogel exhibits long-term adhesiveness,which is attributed to the mussel-inspired dynamic redox balance of catechol/quinone groups on the CP/LS NPs.This conductive and adhesive hydrogel shows good electroactivity and biocompatibility and therefore has broad applications in electrostimulation of tissue regeneration and implantable bioelectronics.

A Stable Open-Shell Conjugated Diradical Polymer with Ultra-High Photothermal Conversion Efficiency for NIR-Ⅱ Photo-Immunotherapy of Metastatic Tumor

Massive efforts have been concentrated on the advance of eminent near-infrared(NIR) photothermal materials(PTMs) in the NIR-Ⅱ window(1000–1700 nm), especially organic PTMs because of their intrinsic biological safety compared with inorganic PTMs. However, so far, only a few NIR-Ⅱresponsive organic PTMs was explored, and their photothermal conversion efficiencies(PCEs) still remain relatively low. Herein, donor–acceptor conjugated diradical polymers with open-shell characteristics are explored for synergistically photothermal immunotherapy of metastatic tumors in the NIR-Ⅱ window. By employing side-chain regulation, the conjugated diradical polymer TTB-2 with obvious NIR-Ⅱ absorption was developed, and its nanoparticles realize a record-breaking PCE of 87.7% upon NIR-Ⅱ light illustration. In vitro and in vivo experiments demonstrate that TTB-2 nanoparticles show good tumor photoablation with navigation of photoacoustic imaging in the NIR-Ⅱ window, without any side-effect. Moreover, by combining with PD-1 antibody,the pulmonary metastasis of breast cancer is high-effectively prevented by the efficient photo-immunity effect. Thus, this study explores superior PTMs for cancer metastasis theranostics in the NIR-Ⅱ window, offering a new horizon in developing radical-characteristic NIR-Ⅱ photothermal materials.

Molecularly imprinted polymer based on upconversion nanoparticles for highly selective and sensitive determination of Ochratoxin A

A novel molecularly imprinted polymer (MIP) based on upconversion nanoparticles (UCNPs) was successfully synthesized for determination of Ochratoxin A (OTA). The MIP was developed on the silica-coated UCNPs using N-(1-hydroxy-2-naphthoyl amido)-(L)-phenylalanine (HNA-Phe) as the alternative template. The final composite combined the advantages of the high selectivity of MIP with the high fluorescence intensity of UCNPs which was selective and sensitive to OTA. Under the optimal condition, the fluorescence intensity of UCNPs@SiO2@MIP decreases linearly when the concentration of OTA increases from 0.05 to 1.0 mg/L. The detection limit of OTA with the method was 0.031 mg/L. At three spiked concentration levels (50, 100 and 200 μg/kg), the recovery ranges of OTA in corn, rice and feed are 88.0%–91.6%, 80.2%–91.6% and 89.2%–90.4%, respectively.

A Self-Healing and Nonflammable Cross-Linked Network Polymer Electrolyte with the Combination of Hydrogen Bonds and Dynamic Disulfide Bonds for Lithium Metal Batteries

The self-healing solid polymer electrolytes(SHSPEs)can spontaneously eliminate mechanical damages or micro-cracks generated during the assembly or operation of lithium-ion batteries(LIBs),significantly improving cycling performance and extending service life of LIBs.Here,we report a novel cross-linked network SHSPE(PDDP)containing hydrogen bonds and dynamic disulfide bonds with excellent self-healing properties and nonflammability.The combination of hydrogen bonding between urea groups and the metathesis reaction of dynamic disulfide bonds endows PDDP with rapid self-healing capacity at 28°C without external stimulation.Furthermore,the addition of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide(EMIMTFSI)improves the ionic conductivity(1.13×10^(−4)S cm^(−1)at 28°C)and non-flammability of PDDP.The assembled Li/PDDP/LiFePO_(4)cell exhibits excellent cycling performance with a discharge capacity of 137 mA h g^(−1)after 300 cycles at 0.2 C.More importantly,the self-healed PDDP can recover almost the same ionic conductivity and cycling performance as the original PDDP.

Photocatalytic properties of thin films of ruthenium metallopolymers/gold nanoparticle: Polyoxometalate composites using visible excitation

Thin layers of an electrostatically associated adduct RuPVP-AuNP:POM formed between the polyoxomolybdate, [S2 Mo18 O62 ]4, the polycationic metallopolymer [Ru(bpy)2(PVP)10 ](ClO4)2 and DMAP-protected gold nanoparticle have been deposited onto electrodes using two separate methods, alternate immersion layer-by-layer assembly and pre-assembled drop-casting; PVP is poly(4-vinylpyridine), BPY is 2,2'-bipyridyl, and DMAP is 4-dimethylaminopyridine. Significantly, the efficiency of the photocatalysis depends markedly on the structure of the [RuPVP-AuNP:POM] even when photonic properties are very similar. Strikingly, despite their similar photonic properties, an additional optical transition is observed in UV-vis and the Raman spectra of pre-assembled drop cast [RuPVP-AuNP:POM], which was not seen in dip coated [RuPVP-AuNP:POM]. Importantly, this electronic communication enhances the photocatalytic oxidation of benzaldehyde by a factor of more than four. While there is clear evidence for photosensitisation in the drop cast not present for the dip coated systems, the magnitude of the photocurrent, i.e.,(82.2 6.6) nA·cm 2for pre-assembled drop cast [RuPVP-AuNP:POM] at a ruthenium to Au nanoparticle mole ratio of 48:1, is twice as large as that those found in [Ru-PVP:POM] film.

RBC Membrane Camouflaged Semiconducting Polymer Nanoparticles for Near-Infrared Photoacoustic Imaging and Photothermal Therapy

Semiconducting conjugated polymer nanoparticles(SPNs)represent an emerging class of phototheranostic materi-als with great promise for cancer treatment.In this report,low-bandgap electron donoracceptor(DA)-conjugated SPNs with sur-face cloaked by red blood cell membrane(RBCM)are developed for highly e ective photoacoustic imaging and photothermal therapy.The resulting RBCM-coated SPN(SPN@RBCM)displays remarkable near-infrared light absorption and good photosta-bility,as well as high photothermal conver-sion e ciency for photoacoustic imaging and photothermal therapy.Particularly,due to the small size(<5 nm),SPN@RBCM has the advantages of deep tumor penetration and rapid clearance from the body with no appreciable toxicity.The RBCM endows the SPNs with prolonged systematic circulation time,less reticuloendothelial system uptake and reduced immune-recognition,hence improving tumor accumulation after intravenous injection,which provides strong photoacoustic signals and exerts excellent photothermal therapeutic e ects.Thus,this work provides a valuable paradigm for safe and highly e cient tumor pho-toacoustic imaging and photothermal therapy for further clinical translation.

Nanoparticle-induced drag reduction for polyacrylamide in turbulent flow with high Reynolds numbers

Although having been increasingly studied, there is still controversy as to when the addition of nanoparticles could improve the drag reduction performance of polymer drag reducer and particularly what is the underlying mechanism from the fluid dynamics viewpoint. The drag reduction effects of adding SiO_(2) nanoparticles to various polymer polyacrylamide(PAM) solutions were examined in this work.The optimal combination of SiO_(2) nanoparticles with cationic polyacrylamide was confirmed.Interestingly,the addition of SiO_(2) nanoparticles to cationic polyacrylamide solution was shown to be quite efficient for reducing drag, but only at higher flow rates with Reynolds numbers more than 6000, below which the nanoparticle addition is even negative. The addition of SiO_(2) nanoparticles to the PAM solution is supposed to play a dual role. The first is an increase in flow resistance caused by the Brownian motion of nanoparticles, while the second is a decrease in flow resistance caused by acting as nodes to protect the polymer chain from shear-induced breaking under high shear action. At optimal nanoparticle concentration and under higher Reynolds numbers, the later effect is dominant, which could improve the drag reduction performance of polymer drag reducers. Our work should serve as a guide for the application of natural gas fracturing, where the flow rate is frequently very high.