Pseudogamous Apomixis in Maize and Sorghum in Diploid-Tetraploid Crosses

Apomictic seed development is a complex process including formation of unreduced embryo sac,parthenogenetic embryo development from the egg cell,and endosperm formation either autonomously,or due to fertilization of polar nuclei by the sperm(under pseudogamous form of apomixis).In the latter case,an obstacle to the normal endosperm development is disturbance of maternal(m)-to-paternal(p)genomic ratio 2m:1p that occurs in the cases of pollination of unreduced embryo sac with haploid sperms.Usage of tetraploid pollinators can overcome this problem because in such crosses maternal-to-paternal genomic ratio is 4m:2p that provides formation of kernels with plump endosperm.Using tetraploid lines as pollen parents we observed formation of plump kernels on the ears and panicles of diploid maize and sorghum accessions.These kernels had hybrid endosperm and diploid maternal-type embryo or hybrid embryo with different ploidy level(2n,3n,4n).The frequencies of plump kernels on the ear ranged from 0.2-0.3%to 5.7-6.2%counting from the number of ovaries.Maternal-type plants were found in two maize lines,their frequency varying from 10.7 to 37.5%of the progeny plants.In CMS-lines of sorghum pollinated with tetraploid sorghum accessions,the frequency of plump kernels ranged from 0.6 to 14.0%counting from the number of ovaries;the frequency of maternal-type plants varied from 33.0 up to 96.1%.The hybrid nature of endosperm of the kernels that gave rise to maternal-type plants has been proved by marker gene expression and by SDS-electrophoresis of endosperm proteins.These data testify to variable modes of seed formation under diploid×tetraploid crosses in maize and sorghum both by amphi-and by apomixis.Therefore,usage of tetraploid pollinators might be a promising approach for isolation of apomixis in maize and sorghum accessions.

Distribution of the Classification Traits in the F_2 Progeny of Two Crosses of indica/japonica in Rice (Oryza sativa)

Comparison of seed setting rate, plant height and Cheng's morphological traits were made between the F_2 progeny of indica-japonica hybrids, 02428/Pei'ai 64 and Taichung 65/Teqing. There existed resemblance normal distribution in plant height, and the distribution had no relationship with the seed setting rate and plant height in F_1 progeny, suggesting that there were no gametic selection for the plant height in the F_2 progeny of indica-japoniea hybrids. An average seed setting rate of the F_2 was equal to the F_1 populations in the recombination of 02428/Pei'ai 64 in which there was an excellent cross compatibility, but the remarkable increase in the seed setting rate from the F_1 to F_2 in Taichung 65/Teqing, indicating that gametic selection only took place in the indica-japonica crosses with low cross compatibility while null or little in the hybrids with high compatibility. There were many intermediate types among the leaf pubescence, color of hull at heading, and length of the first and second panicle internode, and these Cheng's morphological traits was distributed normally; there were also a little intermediate types in hull hairness and phenol reaction with bi-peak distribution; while length to width ratio of grain was inclined to the japonica types obviously showing a skewed distribution in the F2 population. Although Cheng's morphological traits in F_2 populations had inconsistent distribution types, Cheng's morphological traits index showed normal distribution, which suggested that intermediate types, i.e. indicalinous or japonicalinous, were primary in F_2 population.

Genetic analysis of quality traits in intersubspecies crosses of rice

Indica and japonica rices are two subspecies ofAsia cultivated rice.Their grain qualities exista significant difference.The objective of thispaper is to study the genetic control of qualitytraits in intersubspecies crosses of rice.In 1991,4 japonica varieties with widecompatibility,PC311,Zhenxiqiuguang,Lun-hui 422,and Ce 03 were crossed with 5 indicavarieties,3037,Zaoxiandang 18,IR36,Minghui 63,and Yangdao 4 according to NC(?)design.The 20 hybrids using japonica as ma-

Linkage analysis and integrated software GAPL for pure-line populations derived from four-way and eight-way crosses

Pure lines derived from multiple parents provide abundant variation for genetic study.However,efficient genetic analysis methods and user-friendly software are still lacking.In this study, we developed linkage analysis methods and integrated analysis software for pure-line populations derived from four-way and eight-way crosses.First, polymorphic markers are classified into different categories according to the number of identifiable alleles in the inbred parents.Expected genotypic probability is then derived for each pair of complete markers, and based on them a maximum likelihood estimate(MLE) of recombination frequency is calculated.An EM algorithm is proposed for calculating recombination frequencies in scenarios that at least one marker is incomplete.A linkage map can thus be constructed using estimated recombination frequencies.We describe a software package called GAPL for recombination frequency estimation and linkage map construction in multi-parental pure-line populations.Both simulation studies and results from a reported four-way cross recombinant inbred line population demonstrate that the proposed method and software can build more accurate linkage maps in shorter times than other published software packages.The GAPL software is freely available from www.isbreeding.net and can also be used for QTL mapping in multi-parental populations.

Selection Effects of Soil Fertility on the Progenies of Soybean Crosses

The F2, F3, families and F4 lines of six soybean crosses, were selected successively under high-and low - fertility sites with the relection objective of high yield and the method of pedigree was used. Two best F4 - derived lines were chosen from each of the six crosses under both high-and low-fertility for use in this study. In 1995, the total 24 lines were tested in high, medium and low fertility sites with the same experimental design (CRB) to study the selcctoin effects of high and low - fertility. The results suggested that high- and low-fertility had different selection effects. High fertility was more effective for selecting lines, which had higher yield under high-fertility and lower yield under low-fertility; low-fertility was better for selecting lines, which had higher yield under low-fertility and lower yield under low-fertility, and high fertility was somewhat better than low fertility for selecting lines, which had higher yield under both high and low-fertility. It revealed that the lines selected from high-fertility had superior yield potential. The lines selected from high-fertility had shorter plant height, more nodes on main stem, fewer branches, higher seed-stem ratio. The reverse was true for the lines selected from low-fertility . The lodging-resistance of the lines selected from highfertility was greater than that of the lines from low-fertility. The soil fertility level of breeding nursery should be chosen according to the breeding objective.

Multi-band microwave metamaterial absorber based on coplanar Jerusalem crosses

The influence of the gap on the absorption performance of the conventional split ring resonator(SRR) absorber is investigated at microwave frequencies. Our simulated results reveal that the geometry of the square SRR can be equivalent to a Jerusalem cross(JC) resonator and its corresponding metamaterial absorber(MA) is changed to a JC absorber. The JC MA exhibits an experimental absorption peak of 99.1% at 8.72 GHz, which shows an excellent agreement with our simulated results. By simply assembling several JCs with slightly different geometric parameters next to each other into a unit cell, a perfect multi-band absorption can be effectively obtained. The experimental results show that the MA has four distinct and strong absorption peaks at 8.32 GHz, 9.8 GHz, 11.52 GHz and 13.24 GHz. Finally, the multi-reflection interference theory is introduced to interpret the absorption mechanism.

Evaluation of some Newly Developed Diploid Hybrids and their Breeding Value in 4x-2x Crosses

The narrow genetic base in potato (Solanum tuberosum L.) limits the progress in cultivar development.The rich diploid germplasm in the origin center of potato provide a unique resource for improvement of tetraploid potatoes.Seven newly developed diploid hybrids with 2n pollen production,all of which have S. phureja background,were developed and evaluated for their value in potato breeding.They were crossed as male parnets to six tetraploid Solanum tuberosum cultivars,and seeds in large quantity from eleven crosses were obtained.Main agronomic traits,such as tuber yield,tuber number,mean tuber weight,tuber shape,eye depth,skin smoothness,flesh color,and specific gravity,were measured for 4x 2x tetraploid progenies in seedling generation,and their parents as well.All of the diploid hybrids had some merit for specific traits and the DH39 was more promising;high specific gravity trait in some diploid hybrids was successfully introgressed into tetroploid progenies via 4x 2x crosses.These diploid hybrids have potential value in potato breeding.

Frequency Domain Fatigue Evaluation on SCR Girth-Weld Based on Structural Stress

The Steel Catenary Riser(SCR)is a vital component for transporting oil and gas from the seabed to the floating platform.The harsh environmental conditions and complex platform motion make the SCR’s girth-weld prone to fatigue failure.The structural stress fatigue theory and Master S-N curve method provide accurate predictions for the fatigue damage on the welded joints,which demonstrate significant potential and compatibility in multi-axial and random fatigue evaluation.Here,we propose a new frequency fatigue model subjected to welded joints of SCR under multiaxial stress,which fully integrates the mesh-insensitive structural stress and frequency domain random process and transforms the conventional welding fatigue technique of SCR into a spectrum analysis technique utilizing structural stress.Besides,a full-scale FE model of SCR with welds is established to obtain the modal structural stress of the girth weld and the frequency response function(FRF)of modal coordinate,and a biaxial fatigue evaluation about the girth weld of the SCR can be achieved by taking the effects of multi-load correlation and pipe-soil interaction into account.The research results indicate that the frequency-domain fatigue results are aligned with the time-domain results,meeting the fatigue evaluation requirements of the SCR.

Possibilities for the synthesis of superheavy element Z=121 in fusion reactions

Based on the dinuclear system model,the calculated evaporation residue cross sections matched well with the current experimental results.The synthesis of superheavy elements Z=121 was systematically studied through combinations of stable projectiles with Z=21-30 and targets with half-lives exceeding 50 d.The influence of mass asymmetry and isotopic dependence on the projectile and target nuclei was investigated in detail.The reactions^(254)Es(^(46)Ti,3n)^(297)121 and^(252)Es(^(46)Ti,3n)^(295)121 were found to be experimentally feasible for synthesizing superheavy element Z=121,with maximal evaporation residue cross sections of 6.619 and 4.123 fb at 219.9 and 223.9 MeV,respectively.

Corneal collagen cross-linking in patients with keratoconus from the Dresden protocol to customized solutions:theoretical basis

Keratoconus is an ectatic condition characterized by gradual corneal thinning,corneal protrusion,progressive irregular astigmatism,corneal fibrosis,and visual impairment.The therapeutic options regarding improvement of visual function include glasses or soft contact lenses correction for initial stages,gas-permeable rigid contact lenses,scleral lenses,implantation of intrastromal corneal ring or corneal transplants for most advanced stages.In keratoconus cases showing disease progression corneal collagen crosslinking(CXL)has been proven to be an effective,minimally invasive and safe procedure.CXL consists of a photochemical reaction of corneal collagen by riboflavin stimulation with ultraviolet A radiation,resulting in stromal crosslinks formation.The aim of this review is to carry out an examination of CXL methods based on theoretical basis and mathematical models,from the original Dresden protocol to the most recent developments in the technique,reporting the changes proposed in the last 15y and examining the advantages and disadvantages of the various treatment protocols.Finally,the limits of non-standardized methods and the perspectives offered by a customization of the treatment are highlighted.

Cross section determination of^(27)Al(n,2n)^(26)Al reaction induced by 14-MeV neutrons uniting with D-T neutron activation and AMS techniques

Aluminum is the primary structural material in nuclear engineering,and its cross section induced by 14-MeV neutrons is of great significance.To address the issue of insufficient accuracy for the^(27)Al(n,2n)^(26)Al reaction cross section,the activation method and accelerator mass spectrometry(AMS)technique were used to determine the^(27)Al(n,2n)^(26)Al cross section,which could be used as a D-T plasma ion temperature monitor in fusion reactors.At the China Academy of Engineering Physics,neutron activation was performed using a K-400 neutron generator produced by the T(d,n)4He reaction.The^(26)Al∕^(27)Al isotope ratios were measured using the newly installed GYIG 1 MV AMS at the Institute of Geochemistry,Chinese Academy of Sciences.The neutron flux was monitored by measuring the activity of 92mNb produced by the 93Nb(n,2n)92mNb reaction.The measured results were compared with available data in the experimental nuclear reaction database,and the measured values showed a reasonable degree of consistency with partially available literature data.The newly acquired cross-sectional data at 12 neutron energy points through systematic measurements clarified the divergence,which has two different growth trends from the existing experimental values.The obtained results are also compared with the corresponding evaluated database,and the newly calculated excitation functions with TALYS−1.95 and EMPIRE−3.2 codes,the agreement with CENDL−3.2,TENDL-2021 and EMPIRE−3.2 results are generally acceptable.A substantial improvement in the knowledge of the^(27)Al(n,2n)^(26)Al reaction excitation function was obtained in the present work,which will lay the foundation for the diagnosis of the fusion ion temperature,testing of the nuclear physics model,evaluation of nuclear data,etc.

The n-resolved single-electron capture in slow O^(6+)-Ne collisions

A study of single-electron capture(SEC) in 18-240 keV O^(6+)-Ne collisions has been conducted employing a combination of experimental and theoretical methodologies.Utilizing a reaction microscope,state-selective SEC cross sections and projectile scattering angle distributions were obtained.The translational energy spectra for SEC reveal the prevailing capture into n=3 states of the projectile ion,with a minor contribution from n=4 states.Notably,as the projectile's energy increases,the relative contribution of SEC n=4 states increases while that of SEC n=3 states diminishes.Furthermore,we computed state-selective relative cross sections and angular differential cross sections employing the classical molecular Coulomb over-the-barrier model(MCBM) and the multichannel Landau-Zener(MCLZ) model.A discernible discrepancy between the state-selective cross sections from the two theoretical models is apparent for the considered impact energies.However,regarding the angular differential cross sections,an overall agreement was attained between the current experimental results and the theoretical results from the MCLZ model.

Cr-induced fusion reactions to synthesize superheavy elements

We investigated ^(50,52-54)Cr-induced fusion reactions for the synthesis of the superheavy element in the 104≤Z≤122 range.The cross sections produced in this investigation using ^(54)Cr projectiles were compared with those obtained in prior experiments.The estimated cross sections from this analysis are consistent with the findings of prior studies.From the current study,the predicted cross section was found to be 42fb at 236 MeV for ^(53)Cr+^(243)Am,23.2 fb at 236 MeV for ^(54)Cr+^(247)Cm,95.6 fb at 240 MeV for ^(53)Cr+248Bk,and 1.33 fb at 242 MeV for ^(53)Cr+250Cf.Consequently,these projected cross sections with excitation energy and beam energy will be useful in future Cr-induced fusion reaction investigations.

Asymmetric expression of CA2 and CA13 linked to calcification in the bilateral mandibular condyles cause crossed beaks in chickens

Crossed beak is a complex mode of inheritance with prevalence ranging from 0.2 to 7.4% in at least 12 chicken strains worldwide.To reveal the intrinsic factors causing crossed beaks,genes expression patterns in bilateral mandibular condyle between affected and normal birds were characterized by RNA sequencing analysis in the present studies.Crossed beak was induced by short length of unilateral mandibular ramus,and a total of 110differentially expressed genes were up-or down-regulated in the affected(short)mandibular condyle side as compared to the normal side.Carbonic anhydrase 2(CA2)and Carbonic anhydrase 13(CA13)were enriched in the carbonate dehydratase activity,and high-expressed in mandibular condyle and osteoblasts(P<0.05).However,both were low-expressed in short mandibular condyle side of affected birds(P<0.05).The carbonate dehydratase inhibitor experiments confirmed that there is positive association between the calcification and carbonic anhydrase isoenzymes.Quantitative analysis with cetylpyridinium chloride showed a decrease in calcification when the cells were transfected with an anti-CA13 shRNA.Our research suggested that CA2 and CA13 are down-calcified in shortside mandibular condyle,and caused mandibular ramus to grow slowly.CA2 and CA13 have the critical role in crossed beaks by regulating calcification of mandibular condyle.

Application of CFD and FEA Coupling to Predict Structural Dynamic Responses of A Trimaran in Uni-and Bi-Directional Waves

To predict the wave loads of a flexible trimaran in different wave fields,a one-way interaction numerical simulation method is proposed by integrating the fluid solver(Star-CCM+)and structural solver(Abaqus).Differing from the existing coupled CFD-FEA method for monohull ships in head waves,the presented method equates the mass and stiffness of the whole ship to the hull shell so that any transverse and longitudinal section stress of the hull in oblique waves can be obtained.Firstly,verification study and sensitivity analysis are carried out by comparing the trimaran motions using different mesh sizes and time step schemes.Discussion on the wave elevation of uni-and bi-directional waves is also carried out.Then a comprehensive analysis on the structural responses of the trimaran in different uni-directional regular wave and bi-directional cross sea conditions is carried out,respectively.Finally,the differences in structural response characteristics of trimaran in different wave fields are studied.The results show that the present method can reduce the computational burden of the two-way fluid-structure interaction simulations.

Floquet spectrum and universal dynamics of a periodically driven two-atom system

We investigate the Floquet spectrum and excitation properties of a two-ultracold-atom system with periodically driven interaction in a three-dimensional harmonic trap.The interaction between the atoms is changed by varying the s-wave scattering length in two ways,the cosine and the square-wave modulations.It is found that as the driving frequency increases,the Floquet spectrum exhibits two main features for both modulations,the accumulating and the spreading of the quasienergy levels,which further lead to different dynamical behaviors.The accumulation is associated with collective excitations and the persistent growth of the energy,while the spread indicates that the energy is bounded at all times.The initial scattering length,the driving frequency and amplitude can all significantly change the Floquet spectrum as well as the dynamics.However,the corresponding relation between them is valid universally.Finally,we propose a mechanism for selectively exciting the system to one specific state by using the avoided crossing of two quasienergy levels,which could guide preparation of a desired state in experiments.

Frequent recombination in Cynoglossus abbreviatus(Pleuronectiformes:Cynoglossidae)ribosomal 18S rDNA

The conventional theory of concerted evolution has been used to explain the lack of sequence variation in ribosomal RNA(rRNA)genes across diverse eukaryotic species.However,recent investigations into rRNA genes in flatfish genome have resulted in controversial findings.This study focuses on 18S rRNA genes of the widely distributed tongue sole,Cynoglossus abbreviatus(Pleuronectiformes:Cynoglossidae),aiming to explore sequence polymorphism.Five distinct 18S rDNA sequence types(Type A,B,R1,R2,and R3)were identified,suggesting a departure from concerted evolution.A combination of general criteria and variations in highly conserved regions were employed to detect pseudogenes.The results pinpointed Type A sequences as potential pseudogenes due to significant sequence variations and deviations in secondary structure within highly conserved regions.Three types(Type R1,R2,and R3)were identified as recombinants between Type A and B sequences,with simple crossing over and gene conversion as the most likely recombination mechanisms.These findings not only contribute to rRNA pseudogene identification but also shed light on the evolutionary dynamics of rRNA genes in teleost genomes.

Identifying influential spreaders in complex networks based on density entropy and community structure

In recent years,exploring the relationship between community structure and node centrality in complex networks has gained significant attention from researchers,given its fundamental theoretical significance and practical implications.To address the impact of network communities on target nodes and effectively identify highly influential nodes with strong propagation capabilities,this paper proposes a novel influential spreaders identification algorithm based on density entropy and community structure(DECS).The proposed method initially integrates a community detection algorithm to obtain the community partition results of the networks.It then comprehensively considers the internal and external density entropies and degree centrality of the target node to evaluate its influence.Experimental validation is conducted on eight networks of varying sizes through susceptible–infected–recovered(SIR)propagation experiments and network static attack experiments.The experimental results demonstrate that the proposed method outperforms five other node centrality methods under the same comparative conditions,particularly in terms of information spreading capability,thereby enhancing the accurate identification of critical nodes in networks.

Rational construction of heterointerfaces in biomass sugarcane-derived carbon for superior electromagnetic wave absorption

The pervasive adoption of 5th generation mobile communication technology propels electromagnetic wave(EW)absorbents to achieve high-level performance.The heterointerface construction is crucial to the improvement of absorption ability.Herein,a series of ultralight composites with rational heterointerfaces(Co/ZnO@N-doped C/layer-stacked C,MSC)is fabricated by calcination with ration-al construction of sugarcane and CoZn-zeolitic imidazolate framework(ZIF).The components and structures of as-prepared composites were investigated,and their electromagnetic parameters could be adjusted by the content of CoZn-ZIFs.All composites possess excellent EW absorption performance,especially MSC-3.The optimal minimum reflection loss and effective absorption band of MSC-3 can reach−42 dB and 7.28 GHz at the thickness of only 1.6 mm with 20wt%filler loading.This excellent performance is attributed to the syner-gistic effect of dielectric loss stemming from the multiple heterointerfaces and magnetic loss induced by magnetic single Co.The sugar-cane-derived layer-stacked carbon has formed consecutive conductive networks and has further dissipated the electromagnetic energy through multiple reflection and conduction losses.Moreover,the simulated radar cross section(RCS)technology manifests that MSC-3 possesses outstanding EW attenuation capacity under realistic far-field conditions.This study provides a strategy for building efficient ab-sorbents based on biomass.