Storage life prediction under pre-strained thermally-accelerated aging of HTPB coating using the change of crosslinking density

In order to predict the storage life of a certain type of HTPB(hydroyl-terminated polybutadiene)coating at 25℃ and analyze the influence of pre-strain on the storage life,the accelerated aging tests of HTPB coating at 40℃,50℃,60℃,70℃ with the pre-strain of 0%,3%,6%,9%,respectively were carried out.The variation regularity of the change of crosslinking density was analyzed and the aging model of HTPB coating under pre-strained thermally-accelerated aging was proposed.The storage life of HTPB coating at 25℃ was estimated by using the Berthelot equation as the end point of the aging life with a 30% decrease in maximum elongation.The results showed that the change of crosslinking density of HTPB coating increased with the increase of aging temperature and aging time,and decreased with the increase of pre-strain.Under 0% prestrain,the relationship between the change of crosslinking density of HTPB coating and the aging time can be described by the logarithmic model with the confidence probability greater than 99%.The stress relaxation phenomenon existed under 3%,6%and 9%pre-strained aging.The aging model considering chemical aging and pre-strain was established with the confidence probability greater than 90%.The storage life of HTPB coating was 15.2935 years at 25C under 0% prestrain,which was reduced by 13.9007%,75.6949% and 89.7859% under 3%,6% and 9% pre-strain,respectively.The existence of pre-strain has a serious impact on the storage life of HTPB coating,therefore,the pre-strain should be avoided as much as possible during the actual storage.

Studies of Permeabilities of Metallic Ions Through Crosslinked Chitosan Membranes

ＩｎｔｒｏｄｕｃｔｉｏｎＣｈｉｔｉｎａｎｄｃｈｉｔｏｓａｎｒｅｐｒｅｓｅｎｔｔｈｅｓｅｃｏｎｄｌａｒｇｅｓｔｃｌａｓｓｏｆｎａｔｕｒａｌｂｉｏｐｏｌｙｍｅｒｓ，ｗｈｉｃｈｈａｖｅｂｅｅｎｒｅｐｏｒｔｅｄｔｏｂｅｐｒｏｍｉｓｉｎｇｐｏｌｙｍｅｒｓｎｏｔ...

Deuterium NMR Studies on the Orientational Order Generated in Strained Rubbers

The present paper deals with the induced orientational order of the probe molecules dissolved in the uniaxially strained rubbers measured by using deuterium NMR. The distinctive dependence of the quadrupolar splitting on the swelling, elongation and crosslinking density was observed. The orientational order arising from the correlation between chain segments decreases with the increase of the numbers of both links between junctions and solvent molecules around segments.

Simulation on Pyrolysis Products of Thermoset Phenolic Resin with Different Chemical Structure and Experimental Validation

The simulation on pyrolysis products of pure PF resin with different chemical structure was investigated and validated by pyrolysis gas-chromatography mass spectrometry(Py-GC/MS).The simulation of pyrolysis products of phenolic resin with different chemical structure was investigated by AMBER(Assisted Model Building with Energy Refinement)force field.The content of pyrolysis products phenol and cresol decreases with the increase of F/P(formaldehyde/phenol)value.The content of pyrolysis products dimethylphenol and trimethylphenol increases with the enhancement of F/P value.The crosslink density of phenolic mixture can be measured by the content of pyrolysis products dimethylphenol and trimethylphenol.Consequently,the results of simulation were validated by the Py-GC/MS experiment.

Effect of neodymium stearate on cure and mechanical properties of epoxidized natural rubber

The effect of neodymium stearate （NdSt） on cure and mechanical properties of expoxidized natural rubber with 25 mol.% epoxidation （ENR25） was studied in the concentration range of 0 to 2 phr, and the relationship between structure and mechanical properties of ENR25 vulcanizates was also discussed. Neodymium sterate was synthesized by saponification of stearic acid with newly formed rare earth hydroxide m water medium, and the structure of NdSt was investigated by Fourier transform infrared spectroscopy （FTIR）. Crosslinking den- sity of vulcanized natural rubber was studied by equilibrium swelling method. The results indicated that the interaction force between carboxylic ion of NdSt prepared in the lab and Nd ion was mainly ionic bond through FTIR analysis. NdSt could accelerate the vulcanization of ENR25 and influence the network structure of ENR25 vulcanizates. The incorporation of 1 phr NdSt for ENR25 vulcanizatcs showed the optimal aging resistance.

Rigid Biphenyl-contained Epoxy Resins with Improved Thermal Resistant Properties

Biphenyl-contained monomer of 1,4-bis[2-（3,4-epoxy cyclohexyl ethyl） dimethylsilyl] biphenyl （BP-SiH-EP） was prepared via hydrosilylation reaction of 1,4-bis（dimethylsilyl） biphenyl （BP-SiH） and 1,2-epoxy-4-vinylcyclohexane in the presence of Karstedt＇s catalyst. ^1H-NMR, 13C-NMR and FTIR were used to characterize the structure of the obtained monomer. BP-SiH-EP was then cured by methyl hexahydrophthalic anhydride （MeHHPA） with 1-cyanoethyl-2-ethyl-4- methylimidazole as an accelerator. The polymerization behavior was studied by DSC. The results of DMA measurement demonstrate that the cured BP-SiH-EP/MeHHPA can maintain high storage modulus （〉1 GPa） in a wide range of temperature up to 176 ℃. According to the damping factor curve of DMA, cured BP-SiH-EP/MeHHPA exhibits a high glass transition temperature （Tg） of 192 ℃, which is 20 ℃ higher than that of cured 1,4-bis[2-（3,4-epoxy cyclohexyl ethyl） dimethylsilyl] benzene （DEDSB）/MeHHPA. TGA results show that cured BP-SiH-EP/MeHHPA has good thermal stability （Tso/o = 339 ℃） due to the high heat-resistance of rigid biphenyl group. Moreover, the crosslinking density of cured BP-SiH-EP/MeHHPA should be lower than that of cured DEDSB/MeHHPA estimated from their chemical structures, which conflicts with the calculated results based on the rubber elasticity equation. The inconsistence indicates that the calculated crosslinking densities are not comparable, possibly owing to their differences in the rigidity of polymer chains and intermolecular interaction.

0il bleed from elastomeric thermal silicone conductive pads

Oil bleed is a serious problem in elastomeric thermal silicone conductive pads. The components of the oil bleed and the effect of the silicone chemical parameters on the amount ofoil bleed have been determined. The main components of oil bleeds are the uncrosslinked silicones in the cured resins, which include the unreacted silicone materials and the macromolecular substances produced by the hydrosilylation reaction. Cured resins with a high crosslinking density and a high molecular weight of vinyl silicone residues had a lower amount of oil bleed. In addition, a low Si-H content also reduced the amount ofoil bleed.